Tender For Working Estimate For Providing Production Wall Road Arrangements And Galvalume Sheet Roof In Construction Of Pre Fabricted Workshop Building For Centers Of Excellence In Central Polytechnic College, Chennai -113
Tender Overview
Project Description
Tender for Working Estimate For Providing Production Wall Road Arrangements And Galvalume Sheet Roof In Construction Of Pre Fabricted Workshop Building For Centers Of Excellence In Central Polytechnic College, Chennai -113
BOQ
| Sl. No. | Item Description |
| 1 | Earthwork excavation for foundation (for Open excavation) to full depth as per designed in all soils and sub soils except soft disintegrated rock not requiring blasting and hard rock requiring blasting and bailing water wherever necessary. ( Single rate) |
| 2 | Earthwork excavation for foundation (for narrow excavation) to full depth in all soils and sub soils except soft disintegrated rock not requiring blasting and hard rock requiring blasting and bailing water wherever necessary. ( Double rate) |
| 3 | Supplying and filling in foundation and basement with m sand/ Filling sand in layers of not more than 15cm thick well watered, rammed and consolidated etc., complete as per standard specification. |
| 4 | Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401 |
| 5 | Cement Concrete 1:5:10 (One Cement, Five sand and Ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation and flooring including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete complying with standard specification ) |
| 6 | Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid) |
| 7 | Supplying and erecting centering for plane surfaces such as RCC Floor Slab, Roof Slab, Loft, Landing Slabs, etc with necessary supports and strutting upto 3.60m height in all floors with all cross bracings using MS Sheets made of 10 gauge thick welded with MS angle of Size 25mm x 25mm x 3mm for boarding laid over steel adjustable span of size 2m x 2m (expandable upto 3.60m) and supported by Steel Adjustable Telescopic Props of Size 2m x 2m (expandable upto 3.60m) made with outer steel pipe with dia 50mm (3.60mm thick) and inner steel pipe with dia 40mm (2.90mm thick) , etc complete complying with standard specifications. Steel adjustable span and Steel Adjustable telescopic props shall be provided as directed by the departmental Officers. (Payment for centering shall be given after the concrete is laid). |
| 8 | Supplying and erecting steel centering including necessary supports For plane surfaces such as rectangular or square RCC columns etc. which require only nominal strutting using mild steel sheets made of 10 gauge thick welded with MS angle size 40mm x 40mm x 5 mm and supported by Steel Adjustable Telescopic Props of Size 2m x 2m (expandable upto 3.60m) made with outer steel pipe with dia 50mm (3.60mm thick) and inner steel pipe with dia 40mm (2.90mm thick).etc..complete in all floors complying with standard specifcation. Steel Adjustable telescopic props shall be rovided as directed by the departmental Officers. (Payment for centering shall be given after the concrete is laid). |
| 9 | Providing and laying in position, Standardised Concrete Mix M-30 Grade in accordance with IS:456-2000,using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 400 kglms and maximum water cement ratio of 0.45, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5.0 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79cu.m') 7670 kg. of sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standards. (No separate payment will be made by the Department for the excess usage of materials). |
| 10 | For Foundation and Basement |
| 11 | For Ground Floor |
| 12 | Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification. (Contractor has to make his own arrangements for the supply of steel and binding |
| 13 | Brick work in cement mortar 1: 6 (one cement and five sand) using best quality fly ash bricks of size 230x110x70 mm \\" including curing etc., complete complying with standard specification and as directed by the departmental officers.(Masonry projections wherever necessary for required elevation shall be done without extra cost). |
| 14 | For Foundation and Basement |
| 15 | For Ground Floor |
| 16 | Plastering with Cement Mortar 1:5 (One cement and five sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers. |
| 17 | Painting the walls with Two coats with first class quality Plastic Emulsion paint of approved colour over a priming coat including thorough scraping, clean removal of dirt |
| 18 | Supplying and fixing stainless steel staircase hand rail including labour charges for cutting, welding and fixing with MS flats (excluding cost of flat), etc., as directed by the departmental officers. |
| 19 | Supplying, laying and jointing UPVC pipes of Approved quality of the following sizes, including cutting, threading and fixing UPVC specials but excluding cost of such specials, and fixing to wall with necessary TW plugs, clamps and scres, amking good the dismantled portion to original condition with necessary scaffolding charges. Above Ground Level External Water supply arrangements). |
| 20 | 25mm dia UPVC Pipe |
| 21 | Manufacturing, supplying and fixing Precast Reinforced Cement Concrete slabs of following thickness in RCC 1:2:4 (one cement, two crushed stone sand and four aggregates), using following HBGS jelly excluding cost of reinforcement steel in position but including cost of moulding charges, casting of slab, finishing, curing and fixing in position in all floors etc., complete complying with standard specification and as directed. |
| 22 | 75mm thick |
| 23 | Supply and fixing mild steel grills for windows, ventilator, gate, ladder, including priming coat etc., complete complying with standard specification and as directed by the departmental officers |
| 24 | Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification and as directed by the departmental officers. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on |
| 25 | Supplying and fixing colour galvalume sheet roof of 0.47mm thick including priming coat fixing in position with all necessary accessories complete complying with standard specification and as directed by the departmental officers. |
| 26 | Providing and operating power trowel (Concrete finishing equipment with rotating blades enclosed by a safety cage) over the freshly laid concrete surface to create a polished level finish. The Concrete should be power troweled two or three times when Trowel operator should be able to walk firmly on the concrete without sticking concrete on their boots and texturing the slab with uniform grooves using tine grooving rake after power troweling to prevent hydroplaning and improving wet weather pavement friction and to create the desired end result and including hire charges for machineries and labour charges etc. complete complying with standard specification and as directed by the departmental Officers. |
| 27 | Cutting grooves in concrete slab to prevent shrinkage crack using cutting machine. The grooves shall be 5 to 10mm wide and 25 to 30mm deep to accommodate the sealant. The Sealant (bitumen / rubber and pitch / polymer combination) should be hot poured between two sections of concrete, pavement joints etc. complete. The rate includes all charges for hiring cutting machine and labour charges and electricity charges for operation etc., complete complying with standard specification as directed by the departmental Officers. |
| 28 | GST 18 % Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender