Tender For Construction Of Two Storey Library In Municipal Council Samthar
Tender Value
Ref. Documents
Estimated cost
Bid Submission
09 Dec 2026
18 days left
EMD
1.24 Lakhs
Bank guarantee accepted
Document Fee
18558
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jhansi → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Two Storey Library In Municipal Council Samthar
BOQ
| Sl. No. | Item Description |
| 1 | Library ka Nirman, Samthar |
| 2 | Excavation in Foundation in ordinary soil including lift upto 1.5 metre and lead upto 30 m and including filling watering and ramping of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by Engineer-in- Charge upto a distance of 30 m from the foundation trenches. |
| 3 | Earth work in cutting or in filling in ordinary soil excavation to be in the form of regular pits not exceeding 1/2 metre 20\\" in depth andd earthwork in embankment to be in 20 cm layers including ramming and dressing the surface to required level and slopes and also including 1.5 metre lift and 30 m lead the earth from cutting to be used in making filling or to be deposited as spoil bank within 30 metres distance as directed by engineer in charge. |
| 4 | Sand filling in plinth including suppty of necessary quantity of sand from adistance not exceeding 8 km.(5 miles)from the site of work and includingwatering, dressing etc. Rate to including cost of all materials , labour and T&p etc. |
| 5 | Cement concrete with 4 cm gauge approved stone ballast approved coaarse sand and cement in the proportion of 8:4:1 incluning supply of all materials labour and T&P etc. required for proper completion of the work |
| 6 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 7 | Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III): 4 graded stone aggregate 12.5mm nominal size) |
| 8 | Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS:1791 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. |
| 9 | Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete |
| 10 | Centering and shuttering including strutting, propping etc. and removal of form work. |
| 11 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 12 | Providing, fabricating, and fixing composite architectural Red Sandstone Rajasthani Jharokha complete in all respects as per approved elevation drawings. The consolidated work includes:(a) Providing and fixing 40 mm thick red stone jali in cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 matching the stone shade; (b) Providing and fixing heavy moulded red sandstone supporting brackets (corbels) secured to the wall with concealed gunmetal or stainless steel cramps; (c) Providing and laying 30 mm thick red stone slab for the sun-shade base platform; (d) Providing and fixing 40 mm thick sloping overhead stone chajja; and (e) Framing the sides and front of the jharokha with square/circular pillars, carved arches, and moulded cornices using fine ashlar stone masonry. The rate is inclusive of all material, labour, scaffolding, hoisting to all floor levels, cutting, carving, jointing, mortar, and finishing complete as per the direction of the Engineer-in-Charge. |
| 13 | Reinforced cement concrete work (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 14 | Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete |
| 15 | Centering and shuttering including strutting, propping etc. and removal of form work. |
| 16 | Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) :Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor: With Chlorpyriphos E.C. 20% with 1% concentration |
| 17 | 15 mm thick cement plaster 1:6 in two coats work in external plaster |
| 18 | 12.5 mm thick cement plaster 1:4 in internal plaster |
| 19 | Providing and laying in situ seven course water proofing treatment with APP (Atactic poly-propylene) modified Polymeric memberane over roof consisting of first coat of bitumen primer @ 0.40 litre per sqm, 2nd, 4th & 6th courses of bonding material @ 1.20 Kg/sqm, which shall consist of blown type bitumen of grade 85/25 conforming to IS : 702, 3rd and 5th layers of roofing membrane APP modified Polymeric membrane 1.5 mm thick of 2.25 Kg/sqm weight consisting of five layers prefabricated with centre core as 20 micron HMHDPE film sandwiched on both sides with polymeric mix and the polymeric mix is protected on both side with 20 micron HMHDPE film. 7th, the top most layer shall be finished with brick tiles of class designation 10 grouted with cement mortar 1:3 (1cement : 3 fine sand) mixed with 2% integral water proofing compound by weight of cement over a 12 mm layer of cement mortar 1:3 (1 cement : 3 fine sand) and finished neat (item of laying brick tiles shall be paid for separately). |
| 20 | Providing and laying kota slab 20 mm flooring, rissers of steps ,skirting ,dado 10 mm thick in base of cement mortar 1:4 laid over jointed with grey cement slurry mixed with pigment to match the shade of slab including polishing complete. |
| 21 | Providing and laying Ceramic glazed floor tiles of size 600x600 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. |
| 22 | Providing and laying vitrified floor tiless in different size with water absorption less than 0.08% and conforming to IS:15622 of approved less 20 mm thick in base of cement mortar 1:4 laid over jointed with grey cement slurry mixed with pigment to match the shade of slab including polishing complete. Glazed vitrified tiles Matt/Antiskid finish of Size 600 x 600 mm. |
| 23 | Distempering with Acrylic washable oil bound distemper (of approved manufacture) two or more coats over one priming coat to give an even shade |
| 24 | Finishing wall with water proofing cement paint of approved make and quality on new work with two coat give an even shade. |
| 25 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 26 | Providing and fixing angle iron frames for doors, windows and ventilators of mild steel angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge. |
| 27 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick : 5.0 mm thick glass panes (weight not less than 12.50 kg/sqm). |
| 28 | Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings :(Flat back wash basin of size 550x400 mm) |
| 29 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively. |
| 30 | White glazed earthenware european type wc pan with seat and lid, 10 litre low level white vitreous china flushing cistern and C.P. flush bend with fitting and ci brackets 40 mm flush bend overflow arrangement with specials of standard make it complete. |
| 31 | Providing anf fixing 8 mm dia C.P/ S.S jet with Flexible tube upto 1 metre long with S.S triangular plate to european type WC of Quality and make as approved by Engineer in charge. |
| 32 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittingsand fixtures complete.10 litre capacity - range of four urinals basins with white PVC automatic Flushing Cistern. |
| 33 | Providing and fixing P.V.C Waste Pipe Collapsiable 32mm complete in all respect. |
| 34 | Providing and fixing 75 mm high, 50 mm deep and 18 mm thick stone slab table rubbed, edges rounded and polished, fixed in urinal partitionsby cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominalsize) as per direction of Engineer-in-charge and finished smooth.White Agaria Marble Stone |
| 35 | providing and fixing toilet paper holder |
| 36 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : |
| 37 | Providing and fixing C.P. brass angle valve of approved quality conforming to IS:8931 : |
| 38 | Providing and fixing in position SWR UPVC special for soil waste vent or anti syphonage pipes as per as per IS - 14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining.Providing and fixing of bend of required degree with access door |
| 39 | Providing and fixing of plain bend of required degree |
| 40 | Providing and fixing of collar |
| 41 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Rectangular shape 1500x450 mm |
| 42 | Providing, Laying , fixing soil, waste and vent pipes 100mm dia sand cast iron S&S pipe as per IS :1729 jointing and testing complete as per specifications.100mm o/d pipe of 10 Kgf. / sqcm |
| 43 | Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etc. : |
| 44 | Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : |
| 45 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 46 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc.With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 -CPVC SDR 11 Pipe & fitting 20mm o/d |
| 47 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc.With common burnt clay F.P.S. (non modular) bricks of class designation 7.5CPVC SDR 11 Pipe & fitting 25mm o/d |
| 48 | Providing and fixing overhead signage board |
| 49 | Wiring for light point/ fan point / exhaust fan point / call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C |
| 50 | Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. |
| 51 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit asrequired.- 2 X 6 sq. mm + 1 X 6 sq. mm earth wire |
| 52 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. - 4 X 10 sq. mm + 2 X 6 sq. mm earth wire |
| 53 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessedconduit as required. 20 mm |
| 54 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessedconduit as required. 25 mm |
| 55 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 32 mm |
| 56 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. |
| 57 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. |
| 58 | Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. |
| 59 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. Module (100mmX75mm) |
| 60 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. 12 Module (200mmX150mm) |
| 61 | Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. 510 MM Sweep |
| 62 | Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes. |
| 63 | Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required. 62 A TP&N |
| 64 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. - Double pole |
| 65 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.- Triple pole and neutral |
| 66 | Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.- 63 A |
| 67 | Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipeof 2.7 metre long etc. with charcoal/ coke and salt as required. |
| 68 | Supplying and fixing following modular type switch/ socket on the existing switch box/ cover including connections etc. asrequired. - 15/16 A switch |
| 69 | Supplying and fixing following modular type switch/ socket on the existing switch box/ cover including connections etc. asrequired. - 6 pin 15/16 A socket outlet |
| 70 | Supplying, Installation, Testing & Commissioning of Computer All-in-One Set for library computer section, complete in all respect, as per the following minimum requirements:ype: All-in-One Desktop Computer Processor: Intel i5 (12th Gen or above) / AMD Ryzen 5 or above, RAM: 8 GB DDR4 (expandable), Storage: 512 GB SSD,Display: 21.5\\"–23.8\\" FHD integrated display,Connectivity: Dual-band Wi-Fi, Gigabit LAN, Bluetooth,Ports: Min 4 USB, 1 HDMI, 1 RJ-45 LAN, Audio in/outOS: Pre-installed licensed Windows 11 / Linux as required,Accessories: Wireless/USB keyboard & mouse, power cable,Warranty: 3 years onsite warranty minimum. All complete as per the direction of Engineer-In-charge/Architect. |
| 71 | Providing and placing of Office Computer Table made of factory-manufactured modular furniture system as per approved design and dimensions.Length: 1200 mm,Depth: 600 mm,Height: 750 mm |
| 72 | Supply, installation, configuration, testing and commissioning of Library Computers Wi-Fi System for seamless dual-band wireless connectivity in Library Computers premises, including all equipment, cabling and accessories, as per approved layout.Testing: Speed, coverage, user load, and latency test for each node.Warranty: 3 years minimum for hardware. |
| 73 | Supply, installation & commissioning of ergonomic computer chair with adjustable seat height (gas lift Class-3+), 360-degree swivel, breathable mesh/padded seat & back, 5-legged anti-rust treated base with nylon castor wheels, load capacity 120 kg+, with minimum 1–3 years warranty, complete in all respect. |
| 74 | Supply, installation, testing & commissioning of 2–5 MP HD/IP CCTV camera with 20–30 m IR night vision, NVR/DVR recording system with minimum 1–4 TB HDD storage, cabling, mounting, configuration, recording & live feed testing, with 1–3 years onsite warranty, complete in all respect. |
| 75 | Supply, installation & commissioning of powder-coated mild steel student locker almirah (size 1500x900x450 mm) made of 0.8 mm thick body and 1.0 mm thick doors, with individual cam/key locks, ventilation louvers, heavy-duty hinges, numbered label holders, and 1–3 years warranty, complete in all respect. |
| 76 | Supply, installation & commissioning of color printer , with minimum 1–3 years warranty, complete in all respect. |
| 77 | Supply, installation & commissioning of Wall Mount Type Split Air Conditioner of Capacity Between 1.7 Ton , with minimum 1–3 years warranty, complete in all respect. GST Paid Seperatly Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 19, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysDec 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender