Housing Urban and Rular Development Government Departments Closing in 4 days TDR #58604720

Tender For Urgent Repair Work In The Gymnasium Building And Armory (Room No. 1 And 2) At Police Line Sawai Madhopur

Issued by Government Departments · Sawai Madhopur, Rajasthan
Tender Value
16.50 Lakhs
Estimated cost
Bid Submission
23 Nov 2026
4 days left
EMD
33000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Sawai Madhopur → Rajasthan
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender For Urgent Repair Work In The Gymnasium Building And Armory (Room No. 1 And 2) At Police Line Sawai Madhopur

BOQ

Name of Work:- iqfyl ykbZu lokbZ ek/kksiqj fLFkr fteusft;e Hkou ,oa kL=kxkj dejk ua- 1 ,oa 2 esa vfr vko;d ejEer dk;Z
Sl. No. Item Description
1Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.
2Random Rubble stone masonry with hard stone in superstructure above plinth level and upto five level above 30cm. thick walls in :
3Cement Mortar 1:4 ( 1-Cement : 4-Sand).
4Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for Beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.M20 grade Nominal Mix / Design Mix
5Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for :
6Suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands, coping bed plates, anchor blocks, sills, chhajjas, lintel, beam, plinth beam etc.
7Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 m lead With cement mortar 1 :4 ( 1 cement : 4 coarse sand)
8Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meter lead.
9Plaster on new surface on wall in cement sand mortar 1:3 including racking of joints etc. complete fine finish :
1020 mm thick
116 mm thick cement plaster to ceiling of mix 1:3 (1cement : 3-fine sand)
12Providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete
13New Plastered Surface (three or more coats)
14Old Plastered Surface (two or more coats)
15Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade including all scaffolding:
16Two or more coats on new work including prepartion of base with primer, putty, lippy etc complete in all respect.
17Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding:
18New work (two or more coats) over and including scrapping and priming coat with cement primer.
19Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding:
20Old work (one or more coats) including scrapping surface and necessary repairs.
21Same Colour
22Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying :
23after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm.
24laying second layer of Fiber glass cloth when the first layer is still green . Overlaps of joints of fiber cloth should not be less than 10 cm .
25Third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proffing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30cm on parapet wall and tucked into groove in parapet all around
26fourth and final layer of brick tiling ‘with cement mortar or any other approved protective coarse. (which will be paid for separately) For the purpose of measurement the entire treated surface will be measured
27Grading roof for water proofing treatment with water proffing compound
28Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
29Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. ('Original producers' who manufacture billet directly from iron ores and roll the bilets to produce steel conforming to IS:1786)
30Thermo-mechanically Treated bars (Conforming of relevent IS code)
31Supplying and fixing rolling shutters of approved make, made of 80 x 1.25mm. M.S. laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete including cost of spring hooks, providing and fixing necessary 25.3cm. long wire springs grade No. 2 and M.S. top cover 1.25mm thick for rolling shutters as per design & IS 6248- 1979. (Clear openable area to be measured for payment).
32Dismantling tile work in floors and roofs laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 meter lead:
33For thickness of tiles 10mm to 25mm.
34Repair of existing steel glazed doors, windows and ventilator, MS sheet door, garge doors, compound wall gates etc. by welding drilling complete include. Cost of welding rods and hire charge of welding meachine and TP etc complete
35Providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide
36Providing and fixing steel glazed doors windows and ventilator shutters of standard rolled steel section (IS 1038-1983) joints mitred and welded with steel lugs 13x3mm, 10cm. long embedded in cement concrete block 15x10x10cm. of 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screws or rawl plugs and screws with fixing clips or with bolts and nuts as required including providing and fixing of plain glass panes 4mm thick with cooper glazing clips and special metal sash putty of approved make or metal beading with screws complete including priming coat of approval steel primer, excluding the cost of metal beading and other fitting except necessary hinges of pivots steel handles peg stay etc. as required :
37Windows fixed
38Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :
39Two or more coats on new work
40Supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20x3mm with suitable screw at not exceeding 150mm distance.
41Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design :
42Providing and fixing pressed steel door frames confirming to IS 4351 manufactured from commercial mild steel sheet of 1.25 mm thickness including hinges jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface including filling with CC 1:2:4(M15 grade) complete as directed by Engineer-in-charge :
43Profile E
44Half brick masonry in Superstructure , above plinth level upto floor V level using bricks of designation 75
45Cement mortar 1 : 4 (1 cement : 4 coarse sand)
46Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level in all shapes and sizes in :
47Cement mortar 1 : 6 (1 cement : 6 coarse sand)
48Providing and fixing 1st quality MAT finished ceremic tile size 300x300mm confirming to IS : 13755 and IS : 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4).
49Kota stone slab flooring 25 mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand)
50For area of each slab from 2001 to 5000 Sq.Cm
51P & F lst quality WVC Urinal (IS:2556 mark) with 25mm dia G.I. waste pipe, dome waste couplings, concealed iron brackets or screws etc complete.
52Flat Back (large) or half stall size 610x400x80mm.
53P & F Low level Flushing Cistern of 10 litres capacity (IS : 2556 mark) of approved make with complete fittings C.I. brackets duly painted, brass ball cock with ball (IS: 1703 mark) complete including cutting and making good the wall:
54PVC with PVC bend as per IS : 7231 .
55P & F WVC Wash basin (Ist quality IS:2556 Mark) of approved make with C.I. brackets duly painted 1 No. 15 mm C.P. Pillar cock (IS:8934 Mark) & 32 mm C.P. brass waste coupling of approved make, P.V.C Waste pipe with PVC nut 32 mm complete including cutting & making good the wall :
56Size 510 mm x 400 mm
57P & F G.I. pipes (Internal Work) with G.I. Fittings excluding union (IS:1239 Mark) & MS clamps including cutting and making good the walls and floors:
58Exposed on wall
5915 mm dia nominal bore
60'A' Class
61P & F Bib Cock (IS : 8931 Mark), Superior quality of approved make:
62(-do-) Long body, 15mm nominal bore weight not less than 690 gm
63P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant.
6475 mm dia
65P & F European type white glazed vitreous china 1st quality W.C pan (IS : 2556 Mark) with P or S trap including cutting and making good the wall and floor
66P & F PVC Storage Tank ISI Marked (IS : 12701) indicating the BIS license No), of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design:
67500 ltr. Capacity
68Pointing on stone masonry in cement sand mortar 1:3 (1 cement : 3 sand) :
69Flush / Ruled/ Struck or weathered pointing.
70Renewing glass panes,with putty and nails wherever necessary
71Float glass panes of thickness 4 mm
72P & F White Vitreous China Double Syphonic European W.C. (I.S:2556Mark) with mounted W.V.C. flushing cistern of (IS : 2556 Mark) of 10 litre capacity complete with all necessary internal fittings including cutting and making good the wall and floor.
73P & F Towel Rail or Ring of approved quality/make:
74C.P. brass Towel Rail elbow type with concealed screws size 450mm (Heavy duty).
75Repair to damaged RCC slabs, beams and columns etc for strengthening with cement mortar 1 : 2 in following steps :-
76Choping losse and cracked concrete to required depth, cleaning the exposed surface of steel and concrete with wire brush and sand papering , cleaning of concrete surface with water as necessary and getting dried.
77Applying Epoxy primer on the exposed steel bars.
78Applying Epoxy hardener and resin mix (as per manufectured's specification) on concrete and steel bars with brush.
79Speading dry cement mortar 1 : 2 mix over epoxy treated wet surface and allow it to dry for one day.
80Plastering the surface with cement sand mortar 1 : 3 upto depth of 30mm complete.
81Cure the plastered surface for 15 days, All work including scaffolding etc. complete in all respect. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58604720
AUTHORITY Government Departments
TENDER VALUE 16.50 Lakhs
LAST DATE 23-11-2026
Authority
Authority Name Public Works Department
Work Description Tender For Urgent Repair Work In The Gymnasium Building And Armory (Room No. 1 And 2) At Police Line Sawai Madhopur
Basic Detail
Tender No E-NIT No. 17/2026-27 EE PWD Dn. I Sawai Madhopur
Bidding Type Tender
Location
City Sawai Madhopur
State Rajasthan
Key Dates
Publish Date 19 Nov 2026
Submission Date 23 Nov 2026
Open Date 25 Nov 2026
Finance
Tender Value 16.50 Lakhs
Tender Fee 500
EMD 33000
Exemption Available
Document List
ad84531b-e88a-4bc4-a478-a0459c57e36f.html
BOQ_1075073.xls
Tendernotice_1.pdf
Tendernotice_2.pdf
Tendernotice_3.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 19, 2026
11:30 IST

Tender Published

Tender notice published.

Today
Nov 23, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 4 days
Nov 25, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 6 days

Tender Documents

Download All (ZIP) ↓
html

ad84531b-e88a-4bc4-a478-a0459c57e36f.html

xls

BOQ_1075073.xls

pdf

Tendernotice_1.pdf

pdf

Tendernotice_2.pdf

pdf

Tendernotice_3.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender