Water Resources and Irrigation Government Departments Closing in 11 days TDR #58604577

Tender For Reinforcement Of Koliatha-I Tw, Koliatha-Vii Tw, Raghunathpur-I Rl, Lalitagiri-Ii Rl, Lalitagiri-Iii Rl & Lalitagiri-Vii Rl L.I. Projects Of Mahanga Block In Kataka District Under State Plan 2026-27(Ren)

Issued by Government Departments · Cuttack, Odisha
Tender Value
58.35 Lakhs
Estimated cost
Bid Submission
03 Dec 2026
11 days left
EMD
58358
Bank guarantee accepted
Document Fee
11800
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Cuttack → Odisha
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Reinforcement Of Koliatha-I Tw, Koliatha-Vii Tw, Raghunathpur-I Rl, Lalitagiri-Ii Rl, Lalitagiri-Iii Rl & Lalitagiri-Vii Rl L.I. Projects Of Mahanga Block In Kataka District Under State Plan 2026-27(Ren)

BOQ

Name of Work:- REINFORCEMENT OF KOLIATHA-I TW, KOLIATHA-VII TW, RAGHUNATHPUR-I RL, LALITAGIRI-II RL, LALITAGIRI-III RL & LALITAGIRI-VII RL L.I. PROJECTS OF MAHANGA BLOCK IN KATAKA DISTRICT UNDER STATE PLAN 2026-27(REN)
Sl. No. Item Description
1KOLIATHA-I TW:Earth work in excavation of foundation in hard soil within 50 m initial lead & 1.5 M initial lift including dressing & levelling the bed & depositing excavated materials within above lead & lift including cost of all T&P required for the work, cost of transportation, cess etc complete except GST as per instruction of Engineer-in-Charge.
2Filling in F&P with excavated materials including well watered and rammed including cost of all T&P required for the work, cost of transportation, cess etc complete except GST as per instruction of Engineer-in-Charge.
3Filling in F & P with sand well watered and rammed including cost of all materials, T&P required for the work, cost of transportation, cess, royalty etc complete except GST as per instruction of Engineer-in-Charge.
4Cement concrete (1:4:8) with 4cm (1½”) size hard granite metal C.B. metal of approved quality from approved quarry with required ramming,watering and curring etc. complete including cost, royalty & convence charges of all material to work site, supply of cement,T&P required, royalty etc. complete except GST as per the direction of the Engineer-in-charge.
5C.C. (1:2:4) with 12mm (½”) size hard granite chips (crusher broken) of approved quality from approved quarry with ramming, watering and curring etc. complete with cost of all materials involved like supply of cement including cost of all T&P required for the work, cost of transportation, cess, royalty etc complete except GST as per instruction of Engineer-in-Charge.
6Reinforced Cement concrete (1:2:4) with 12mm (½”) size hard granite chips (Crusher broken) for RCC works including hoisting and laying with approved quality from approved quarry with ramming, watering and curring etc. complete with cost of all materials involved like supply of cement including cost of all T&P required for the work, cost of transportation, cess, royalty etc complete except GST as per instruction of Engineer-in-Charge.
74 cm thick grading concrete (1:2:4) on roof slab with 12mm & down grade size black hard granite chips for old work including cost of all materials, T&P required for the work, cost of transportation, cess, royalty etc complete except GST as per instruction of Engineer-in-Charge
8Supplying, straightening, cutting, bending, binding, fitting,placing and fixing uncoated HYSD bar reinforcement etc complete including supplying, straightening, cutting, bending, binding & tying the grills & placing in position including cost of binding wire 18 to 20 guage per Qntl. including cost of HYSD Still Bar (FE 415/ FE 500) and including cost of all T&P required for the work, cost of transportation, cess etc complete except GST as per instruction of Engineer-in-Charge.
9Rigid smooth centering shuttering for R.C.C. work including false work and dismantling then after casting including cost of all cost etc. complete for R.C.C. floor & Roof slab Landing Balcony, Projection sun shed & Chajja, Shelves Data including cost of all materials, T&P required for the work, cost of transportation, cess etc complete except GST as per instruction of Engineer-in-Charge.
10Fly ash Brick (25cm X 12cm X 8cm size having crushing strength not less than 75 kg/cm2) masonary in cm(1:6) in F&P including cost of all materials, T&P required for the work, cost of transportation, cess, royalty etc complete except GST as per instruction of Engineer-in-Charge.
1110cm dry brick khoa well watered & rammed to receive A.S.Flooring including cost of all materials, T&P required for the work, cost of transportation, cess, royalty etc complete except GST as per instruction of Engineer-in-Charge.
122.5 cm. thick A.S flooring with cement concrete (1:2:4) including punning using 12mm size C.B. chips including at cost etc. complete including cost of all materials, T&P required for the work, cost of transportation, cess, royalty etc complete except GST as per instruction of Engineer-in-Charge.
1312mm (½\\") thick C.P. (1:6) over brick works. including cost of all materials, T&P required for the work, cost of transportation, cess, royalty etc complete except GST as per instruction of Engineer-in-Charge.
14Cement punning including cost of all materials, T&P required for the work, cost of transportation, cess, royalty etc complete except GST as per instruction of Engineer-in-Charge.
15Labour charges for fitting of Iron Door (size 1.0x2.0m) including cost of door and fitting materials, T&P required for the work, cost of transportation, cess etc complete except GST as per instruction of Engineer-in-Charge.
16Labour charges for fitting of Iron Ventilator (size 0.45x0.30m) including cost of door and fitting materials, T&P required for the work, cost of transportation, cess etc complete except GST as per instruction of Engineer-in-Charge.
17White washing 2 coats with shell lime per 1 Sqm. including cost of all materials, T&P required for the work, cost of transportation, cess etc complete except GST as per instruction of Engineer-in-Charge.
18Colour washing 2 coats with shell lime over white washing 2 coats with shell lime to walls and ceiling per 1 Sqm. including cost of all materials, T&P required for the work, cost of transportation, cess etc complete except GST as per instruction of Engineer-in-Charge.
19Priming one coat with any approved primer for iron work including cost of all materials, T&P required for the work, cost of transportation, cess etc complete except GST as per instruction of Engineer-in-Charge.
20Painting two coats with approved paint on iron work including cost of all materials, T&P required for the work, cost of transportation, cess etc complete except GST as per instruction of Engineer-in-Charge.
21Labour charges for letter writting on display board in black colour on yellow back ground painting including cost of material, labour etc. including cost of materials, labour, T&P required, transportation to site from site stock yard, cess etc complete except GST as per direction of Engineer-in-Charge.
22Cost of laying & fitting of ARV, BFV and Weldless G.I. Tees with distribution pipe line including labour, T&P required, transportation to site from site stock yard, cess etc complete except GST as per direction of Engineer-in-Charge.
23Cost of construction of outlet, fitting of short piece of PVC pipe and soil errossion minimisation arrrangements including cost of labour, T&P required, transportation to site stock yard, from site stock yard, cess etc complete except GST as per direction of Engineer-in-Charge.
24Supply of 160mm dia HDPE PE 80- PN 4 ISI marked High Density Polyethylene (HDPE) Pipes for water supply as per IS-4984/2016 with proper grade and pressure rating including ex-factory rate, entire cost involved in Pre-delivery test & Post delivery test with correspoding test marking on the body of pipes along with name & address of manufacturer, cost of transportation from factory to project site stock yard including loading & unloading, storage at site stock yard, watch and ward etc. and handing over to Pani Panchayat President or Secretary with due approval of authority including all taxes and cess etc. complete but excluding cost of GST. Pre-delivery test & Post deliver tests are to be conducted at the facility of CIPET, Bhubaneswar and test reports thus obtained from CIPET, Bhubaneswar are to be submitted to the Engineer-in-Charge.
25Fitting of 160mm dia HDPE PE 80- PN 4 ISI marked High Density Polyethylene (HDPE) Pipes for water supply as per IS-4984/2016 with proper grade and pressure rating with supply of all required accessories materials, labour, T&P for jointing of 160mm dia High Density Polyethylene Pipes by butt fusion welding method as per specification & laying in trenches with desired leveling, testing including fitting and fixing up of required no. of attachments for Outlets and Shaddles and Riser Nipples, fitting air valve, equal Tee etc. complete including cost of transportation from stock yard to work site complete as per direction of the Engineer-in-Charge.
26Earth work in hard soil such as hard stiff clay,stiff black cotton,hard red earth,shales,moorum ordinary gravels within 50m initial lead and 1.5m initial lift including rough dressing & breaking of clods and stacking rubble or spreading and levelling within the site as the case may be etc.complete including cost of all T&P required for the work, cost of transportation, cess etc complete except GST as per direction of the Engineer-in-charge.(Mechanical 60% & Manual 40%)
27Filling in F & P with excavated materials, after laying and fitting of HDPE/PVC pipes with fitting items, including well watering and ramming in hard soil such as hard stiff clay,stiff black cotton,hard red earth, shales, moorum ordinary gravels within 50m initial lead and 1.5m initial lift including rough dressing & breaking of clods and stacking rubble or spreading and levelling within the site as the case may be etc.complete including cost of all T&P required for the work, cost of transportation, cess etc complete except GST as per direction of the Engineer-in-charge. (Mechanical 60% & Manual 40%)
28Electrical Earthing including including cost of materials, labour, T&P required, transportation to site from site stock yard, cess etc complete except GST as per direction of Engineer-in-Charge.
29Electrical installation and energisation including cost of switchs, sockets, angle holder, 4 nos.bulbs, conduit pipe, 0.75 sqmm wire, 1.50 sqmm wire, 2.50 sqmm wire, 4.0 sqmm wire, 4 nos. of switch boards etc. including cost of labour, T&P required, transportation to site, from site stock yard, cess etc complete except GST as per direction of Engineer-in-Charge.
30Control Pannel with Automatic Star delta Starter, sheet steel enclosure suitable for operation of Squirrel cage induction motor up to 15 HP with 20 Amp (AC -3) duty contractor at 415 Volt+6%-15%, 3 phase, 50 Hz AC supply with over load relay range 8.9 to 13.5 Amp & no volt coil with electronic timer suitable for operation at voltage range of 300 to 440 V. The Starter should provide dependable protection against over load and single phasing fitted with Volt Meter, Ameter, MCB in complete shape including Indicator Lamp including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
314.0 mm2 PVC Single Core Copper Wire ISI mark of reputed Company including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
32150mm dia C.I. Butter Fly Valve BS:5155/15: 13095-CI MOC Lever Operated PN-1.0 with ISI mark of reputed company including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
33Nuts and Bolts including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
34Thick Rubber Insertion 3mm thick including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
35160mmx160mmx110mm dia Weldless G.I.Tee (3.6mm thickness and min. height of 1.2 mtr.) with bend, closing and opening arrangement of reputed company including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
3650mm dia C.I.Air Release Valve (single action) with saddle and Raiser pipe conforming to IS 14845 (SI) with ISI mark from reputed company including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
37160mm dia. HDPE Bend including cost of material, transportation, cess etc. complete except GST
38Cost of supplying of 160 MM HDPE End cap of ISI marked HDPE pipe fitting materials for High Density Polythelene (HDPE) Pipes for water supply of different nominal diameter as per ISI speifications including the rates of ex-factory, transportation, Cess etc complete but excluding cost of GST.
39Cost of supplying of 160X160X160 mm HDPE Tee spigot design 6 kgof ISI marked HDPE pipe fitting materials for High Density Polythelene (HDPE) Pipes for water supply of different nominal diameter as per ISI speifications including the rates of ex-factory, transportation, Cess etc complete but excluding cost of GST.
40Cost of supplying of 160 mm slipon flange of ISI marked HDPE pipe fitting materials for High Density Polythelene (HDPE) Pipes for water supply of different nominal diameter as per ISI speifications including the rates of ex-factory, transportation, Cess etc complete but excluding cost of GST.
41KOLIATHA-VII TW:Earth work in excavation of foundation in hard soil within 50 m initial lead & 1.5 M initial lift including dressing & levelling the bed & depositing excavated materials within above lead & lift including cost of all T&P required for the work, cost of transportation, cess etc complete except GST as per instruction of Engineer-in-Charge.
42Filling in F&P with excavated materials including well watered and rammed including cost of all T&P required for the work, cost of transportation, cess etc complete except GST as per instruction of Engineer-in-Charge.
43Filling in F & P with sand well watered and rammed including cost of all materials, T&P required for the work, cost of transportation, cess, royalty etc complete except GST as per instruction of Engineer-in-Charge.
44Cement concrete (1:4:8) with 4cm (1½”) size hard granite metal C.B. metal of approved quality from approved quarry with required ramming,watering and curring etc. complete including cost, royalty & convence charges of all material to work site, supply of cement,T&P required, royalty etc. complete except GST as per the direction of the Engineer-in-charge.
45C.C. (1:2:4) with 12mm (½”) size hard granite chips (crusher broken) of approved quality from approved quarry with ramming, watering and curring etc. complete with cost of all materials involved like supply of cement including cost of all T&P required for the work, cost of transportation, cess, royalty etc complete except GST as per instruction of Engineer-in-Charge.
46Reinforced Cement concrete (1:2:4) with 12mm (½”) size hard granite chips (Crusher broken) for RCC works including hoisting and laying with approved quality from approved quarry with ramming, watering and curring etc. complete with cost of all materials involved like supply of cement including cost of all T&P required for the work, cost of transportation, cess, royalty etc complete except GST as per instruction of Engineer-in-Charge.
474 cm thick grading concrete (1:2:4) on roof slab with 12mm & down grade size black hard granite chips for old work including cost of all materials, T&P required for the work, cost of transportation, cess, royalty etc complete except GST as per instruction of Engineer-in-Charge
48Supplying, straightening, cutting, bending, binding, fitting,placing and fixing uncoated HYSD bar reinforcement etc complete including supplying, straightening, cutting, bending, binding & tying the grills & placing in position including cost of binding wire 18 to 20 guage per Qntl. including cost of HYSD Still Bar (FE 415/ FE 500) and including cost of all T&P required for the work, cost of transportation, cess etc complete except GST as per instruction of Engineer-in-Charge.
49Rigid smooth centering shuttering for R.C.C. work including false work and dismantling then after casting including cost of all cost etc. complete for R.C.C. floor & Roof slab Landing Balcony, Projection sun shed & Chajja, Shelves Data including cost of all materials, T&P required for the work, cost of transportation, cess etc complete except GST as per instruction of Engineer-in-Charge.
50Fly ash Brick (25cm X 12cm X 8cm size having crushing strength not less than 75 kg/cm2) masonary in cm(1:6) in F&P including cost of all materials, T&P required for the work, cost of transportation, cess, royalty etc complete except GST as per instruction of Engineer-in-Charge.
5110cm dry brick khoa well watered & rammed to receive A.S.Flooring including cost of all materials, T&P required for the work, cost of transportation, cess, royalty etc complete except GST as per instruction of Engineer-in-Charge.
522.5 cm. thick A.S flooring with cement concrete (1:2:4) including punning using 12mm size C.B. chips including at cost etc. complete including cost of all materials, T&P required for the work, cost of transportation, cess, royalty etc complete except GST as per instruction of Engineer-in-Charge.
5312mm (½\\") thick C.P. (1:6) over brick works. including cost of all materials, T&P required for the work, cost of transportation, cess, royalty etc complete except GST as per instruction of Engineer-in-Charge.
54Cement punning including cost of all materials, T&P required for the work, cost of transportation, cess, royalty etc complete except GST as per instruction of Engineer-in-Charge.
55Labour charges for fitting of Iron Door (size 1.0x2.0m) including cost of door and fitting materials, T&P required for the work, cost of transportation, cess etc complete except GST as per instruction of Engineer-in-Charge.
56Labour charges for fitting of Iron Ventilator (size 0.45x0.30m) including cost of door and fitting materials, T&P required for the work, cost of transportation, cess etc complete except GST as per instruction of Engineer-in-Charge.
57White washing 2 coats with shell lime per 1 Sqm. including cost of all materials, T&P required for the work, cost of transportation, cess etc complete except GST as per instruction of Engineer-in-Charge.
58Colour washing 2 coats with shell lime over white washing 2 coats with shell lime to walls and ceiling per 1 Sqm. including cost of all materials, T&P required for the work, cost of transportation, cess etc complete except GST as per instruction of Engineer-in-Charge.
59Priming one coat with any approved primer for iron work including cost of all materials, T&P required for the work, cost of transportation, cess etc complete except GST as per instruction of Engineer-in-Charge.
60Painting two coats with approved paint on iron work including cost of all materials, T&P required for the work, cost of transportation, cess etc complete except GST as per instruction of Engineer-in-Charge.
61Labour charges for letter writting on display board in black colour on yellow back ground painting including cost of material, labour etc. including cost of materials, labour, T&P required, transportation to site from site stock yard, cess etc complete except GST as per direction of Engineer-in-Charge.
62Cost of laying & fitting of ARV, BFV and Weldless G.I. Tees with distribution pipe line including labour, T&P required, transportation to site from site stock yard, cess etc complete except GST as per direction of Engineer-in-Charge.
63Cost of construction of outlet, fitting of short piece of PVC pipe and soil errossion minimisation arrrangements including cost of labour, T&P required, transportation to site stock yard, from site stock yard, cess etc complete except GST as per direction of Engineer-in-Charge.
64Labour charges for fitting of Sluice valves & / NRVs along PVC Pipe line & / lifting &/ lowering of pump sets including cost of labour, welding works with consumables, T&P required, transportation to site from site stock yard, cess etc complete except GST.
65Supply of 160mm dia HDPE PE 80- PN 4 ISI marked High Density Polyethylene (HDPE) Pipes for water supply as per IS-4984/2016 with proper grade and pressure rating including ex-factory rate, entire cost involved in Pre-delivery test & Post delivery test with correspoding test marking on the body of pipes along with name & address of manufacturer, cost of transportation from factory to project site stock yard including loading & unloading, storage at site stock yard, watch and ward etc. and handing over to Pani Panchayat President or Secretary with due approval of authority including all taxes and cess etc. complete but excluding cost of GST. Pre-delivery test & Post deliver tests are to be conducted at the facility of CIPET, Bhubaneswar and test reports thus obtained from CIPET, Bhubaneswar are to be submitted to the Engineer-in-Charge.
66Fitting of 160mm dia HDPE PE 80- PN 4 ISI marked High Density Polyethylene (HDPE) Pipes for water supply as per IS-4984/2016 with proper grade and pressure rating with supply of all required accessories materials, labour, T&P for jointing of 160mm dia High Density Polyethylene Pipes by butt fusion welding method as per specification & laying in trenches with desired leveling, testing including fitting and fixing up of required no. of attachments for Outlets and Shaddles and Riser Nipples, fitting air valve, equal Tee etc. complete including cost of transportation from stock yard to work site complete as per direction of the Engineer-in-Charge.
67Earth work in hard soil such as hard stiff clay,stiff black cotton,hard red earth,shales,moorum ordinary gravels within 50m initial lead and 1.5m initial lift including rough dressing & breaking of clods and stacking rubble or spreading and levelling within the site as the case may be etc.complete including cost of all T&P required for the work, cost of transportation, cess etc complete except GST as per direction of the Engineer-in-charge.(Mechanical 60% & Manual 40%)
68Filling in F & P with excavated materials, after laying and fitting of HDPE/PVC pipes with fitting items, including well watering and ramming in hard soil such as hard stiff clay,stiff black cotton,hard red earth, shales, moorum ordinary gravels within 50m initial lead and 1.5m initial lift including rough dressing & breaking of clods and stacking rubble or spreading and levelling within the site as the case may be etc.complete including cost of all T&P required for the work, cost of transportation, cess etc complete except GST as per direction of the Engineer-in-charge. (Mechanical 60% & Manual 40%)
69Electrical Earthing including including cost of materials, labour, T&P required, transportation to site from site stock yard, cess etc complete except GST as per direction of Engineer-in-Charge.
70Electrical installation and energisation including cost of switchs, sockets, angle holder, 4 nos.bulbs, conduit pipe, 0.75 sqmm wire, 1.50 sqmm wire, 2.50 sqmm wire, 4.0 sqmm wire, 4 nos. of switch boards etc. including cost of labour, T&P required, transportation to site, from site stock yard, cess etc complete except GST as per direction of Engineer-in-Charge.
717.5 HP Submersible motor pump of 25 mtr head with 900 LPM discharge of reputed brand with BEE Star rated energy efficiency suitable for 200 mm dia tube well as per IS specification with 2 pair U-Clamp & 30 mtr of 4.00 sqmm flat cable and Impeller: Bronze grade LTB-2 of IS 318/1981 as per IS specification including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
724.00mm2 Submerssible (3 Core) Flat Cable ISI mark of reputed company including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
73Control Pannel with Automatic Star delta Starter, sheet steel enclosure suitable for operation of Squirrel cage induction motor up to 15 HP with 20 Amp (AC -3) duty contractor at 415 Volt+6%-15%, 3 phase, 50 Hz AC supply with over load relay range 8.9 to 13.5 Amp & no volt coil with electronic timer suitable for operation at voltage range of 300 to 440 V. The Starter should provide dependable protection against over load and single phasing fitted with Volt Meter, Ameter, MCB in complete shape including Indicator Lamp including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
744.0 mm2 PVC Single Core Copper Wire ISI mark of reputed Company including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
756mm dia PVC Insulated Steel Wire Rope ISI mark of reputed Company including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
76150mm dia C.I. Butter Fly Valve BS:5155/15: 13095-CI MOC Lever Operated PN-1.0 with ISI mark of reputed company including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
77Nuts and Bolts including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
78Thick Rubber Insertion 3mm thick including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
79160mmx160mmx110mm dia Weldless G.I.Tee (3.6mm thickness and min. height of 1.2 mtr.) with bend, closing and opening arrangement of reputed company including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
8050mm dia C.I.Air Release Valve (single action) with saddle and Raiser pipe conforming to IS 14845 (SI) with ISI mark from reputed company including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
81160mm dia. HDPE Bend including cost of material, transportation, cess etc. complete except GST
82Cost of supplying of 160 MM HDPE End cap of ISI marked HDPE pipe fitting materials for High Density Polythelene (HDPE) Pipes for water supply of different nominal diameter as per ISI speifications including the rates of ex-factory, transportation, Cess etc complete but excluding cost of GST.
83Cost of supplying of 160X160X160 mm HDPE Tee spigot design 6 kgof ISI marked HDPE pipe fitting materials for High Density Polythelene (HDPE) Pipes for water supply of different nominal diameter as per ISI speifications including the rates of ex-factory, transportation, Cess etc complete but excluding cost of GST.
84Cost of supplying of 160 mm slipon flange of ISI marked HDPE pipe fitting materials for High Density Polythelene (HDPE) Pipes for water supply of different nominal diameter as per ISI speifications including the rates of ex-factory, transportation, Cess etc complete but excluding cost of GST.
85RAGHUNATHPUR-I RL:Earth work in excavation of foundation in hard soil within 50 m initial lead & 1.5 M initial lift including dressing & levelling the bed & depositing excavated materials within above lead & lift including cost of all T&P required for the work, cost of transportation, cess etc complete except GST as per instruction of Engineer-in-Charge.
86Filling in F&P with excavated materials including well watered and rammed including cost of all T&P required for the work, cost of transportation, cess etc complete except GST as per instruction of Engineer-in-Charge.
87Filling in F & P with sand well watered and rammed including cost of all materials, T&P required for the work, cost of transportation, cess, royalty etc complete except GST as per instruction of Engineer-in-Charge.
88Cement concrete (1:4:8) with 4cm (1½”) size hard granite metal C.B. metal of approved quality from approved quarry with required ramming,watering and curring etc. complete including cost, royalty & convence charges of all material to work site, supply of cement,T&P required, royalty etc. complete except GST as per the direction of the Engineer-in-charge.
89C.C. (1:2:4) with 12mm (½”) size hard granite chips (crusher broken) of approved quality from approved quarry with ramming, watering and curring etc. complete with cost of all materials involved like supply of cement including cost of all T&P required for the work, cost of transportation, cess, royalty etc complete except GST as per instruction of Engineer-in-Charge.
90Reinforced Cement concrete (1:2:4) with 12mm (½”) size hard granite chips (Crusher broken) for RCC works including hoisting and laying with approved quality from approved quarry with ramming, watering and curring etc. complete with cost of all materials involved like supply of cement including cost of all T&P required for the work, cost of transportation, cess, royalty etc complete except GST as per instruction of Engineer-in-Charge.
91Supplying, straightening, cutting, bending, binding, fitting,placing and fixing uncoated HYSD bar reinforcement etc complete including supplying, straightening, cutting, bending, binding & tying the grills & placing in position including cost of binding wire 18 to 20 guage per Qntl. including cost of HYSD Still Bar (FE 415/ FE 500) and including cost of all T&P required for the work, cost of transportation, cess etc complete except GST as per instruction of Engineer-in-Charge.
92Rigid smooth centering shuttering for R.C.C. work including false work and dismantling then after casting including cost of all cost etc. complete for R.C.C. floor & Roof slab Landing Balcony, Projection sun shed & Chajja, Shelves Data including cost of all materials, T&P required for the work, cost of transportation, cess etc complete except GST as per instruction of Engineer-in-Charge.
93Fly ash Brick (25cm X 12cm X 8cm size having crushing strength not less than 75 kg/cm2) masonary in cm(1:6) in F&P including cost of all materials, T&P required for the work, cost of transportation, cess, royalty etc complete except GST as per instruction of Engineer-in-Charge.
9412mm (½\\") thick C.P. (1:6) over brick works. including cost of all materials, T&P required for the work, cost of transportation, cess, royalty etc complete except GST as per instruction of Engineer-in-Charge.
95Cement punning including cost of all materials, T&P required for the work, cost of transportation, cess, royalty etc complete except GST as per instruction of Engineer-in-Charge.
96White washing 2 coats with shell lime per 1 Sqm. including cost of all materials, T&P required for the work, cost of transportation, cess etc complete except GST as per instruction of Engineer-in-Charge.
97Labour charges for letter writting on display board in black colour on yellow back ground painting including cost of material, labour etc. including cost of materials, labour, T&P required, transportation to site from site stock yard, cess etc complete except GST as per direction of Engineer-in-Charge.
98Cost of laying & fitting of ARV, BFV and Weldless G.I. Tees with distribution pipe line including labour, T&P required, transportation to site from site stock yard, cess etc complete except GST as per direction of Engineer-in-Charge.
99Cost of construction of outlet, fitting of short piece of PVC pipe and soil errossion minimisation arrrangements including cost of labour, T&P required, transportation to site stock yard, from site stock yard, cess etc complete except GST as per direction of Engineer-in-Charge.
100Labour charges for Installation of MB pumpset, fitting with delivery line including fitting of Priming Tee, Sluice Valve, NR Valve, PVC Tee, fixing suction and delivery pipe to pump set, Foot Valve and other fitting materials including cutting, welding etc. complete including cost of welding materials, labour, T&P required, transportation of materials to site from site stock yard, cess etc complete except GST as per direction of Engineer-in-Charge.
101Supply of 160mm dia HDPE PE 80- PN 4 ISI marked High Density Polyethylene (HDPE) Pipes for water supply as per IS-4984/2016 with proper grade and pressure rating including ex-factory rate, entire cost involved in Pre-delivery test & Post delivery test with correspoding test marking on the body of pipes along with name & address of manufacturer, cost of transportation from factory to project site stock yard including loading & unloading, storage at site stock yard, watch and ward etc. and handing over to Pani Panchayat President or Secretary with due approval of authority including all taxes and cess etc. complete but excluding cost of GST. Pre-delivery test & Post deliver tests are to be conducted at the facility of CIPET, Bhubaneswar and test reports thus obtained from CIPET, Bhubaneswar are to be submitted to the Engineer-in-Charge.
102Fitting of 160mm dia HDPE PE 80- PN 4 ISI marked High Density Polyethylene (HDPE) Pipes for water supply as per IS-4984/2016 with proper grade and pressure rating with supply of all required accessories materials, labour, T&P for jointing of 160mm dia High Density Polyethylene Pipes by butt fusion welding method as per specification & laying in trenches with desired leveling, testing including fitting and fixing up of required no. of attachments for Outlets and Shaddles and Riser Nipples, fitting air valve, equal Tee etc. complete including cost of transportation from stock yard to work site complete as per direction of the Engineer-in-Charge.
103Earth work in hard soil such as hard stiff clay,stiff black cotton,hard red earth,shales,moorum ordinary gravels within 50m initial lead and 1.5m initial lift including rough dressing & breaking of clods and stacking rubble or spreading and levelling within the site as the case may be etc.complete including cost of all T&P required for the work, cost of transportation, cess etc complete except GST as per direction of the Engineer-in-charge.(Mechanical 60% & Manual 40%)
104Filling in F & P with excavated materials, after laying and fitting of HDPE/PVC pipes with fitting items, including well watering and ramming in hard soil such as hard stiff clay,stiff black cotton,hard red earth, shales, moorum ordinary gravels within 50m initial lead and 1.5m initial lift including rough dressing & breaking of clods and stacking rubble or spreading and levelling within the site as the case may be etc.complete including cost of all T&P required for the work, cost of transportation, cess etc complete except GST as per direction of the Engineer-in-charge. (Mechanical 60% & Manual 40%)
105Electrical Earthing including including cost of materials, labour, T&P required, transportation to site from site stock yard, cess etc complete except GST as per direction of Engineer-in-Charge.
106Electrical installation and energisation including cost of switchs, sockets, angle holder, 4 nos.bulbs, conduit pipe, 0.75 sqmm wire, 1.50 sqmm wire, 2.50 sqmm wire, 4.0 sqmm wire, 4 nos. of switch boards etc. including cost of labour, T&P required, transportation to site, from site stock yard, cess etc complete except GST as per direction of Engineer-in-Charge.
107Monoblock pump set total head of 18 mtrs capable to discharge 1700 LPM with 10 HP/7.50 KW squirrel cage induction motor fitted with bronze impeller TB-2 of IS 318/1981, companion flanges & Class \\"F\\"insulation suitable for operation 415 volt +6%-15% 3 phase, 50Hz AC poweer supply suction/deliveery= 100mmx100mm with BEE Star rated energy efficiency Pump & as per IS-9079/2002 with overall efficiency 62 to 65% of reputed brand having wide dealership net work for easy availability of spares.The materials of construction as given below (a) Casing: FC 200 as per IS 210/1978 (b) Impeller: Bronze grade LTB-2 of IS 318/1981 including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
1083x10 sqmm PVC insulated (HD) tropoder armoured Electric Cable with alluminum conductor for use in 3 phase power system of working voltage upto & including 1100 volts at 50Hz confirming to IS 7098(Pt-II) including cost of transportation to site including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
109Control Pannel with Automatic Star delta Starter, sheet steel enclosure suitable for operation of Squirrel cage induction motor up to 15 HP with 20 Amp (AC -3) duty contractor at 415 Volt+6%-15%, 3 phase, 50 Hz AC supply with over load relay range 8.9 to 13.5 Amp & no volt coil with electronic timer suitable for operation at voltage range of 300 to 440 V. The Starter should provide dependable protection against over load and single phasing fitted with Volt Meter, Ameter, MCB in complete shape including Indicator Lamp including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
110Motor hood size (0.45mx0.45mx0.60m) made with 18 SWG (cold rolled M.S.Sheet with one coat of red axide primer and two coats of powder coated paint of approved quality on both side (inside & outside) suitable to cover centrifugal monoblock Pump Set from 10 HP to 15 HP and having provision for attachement with the groves on rear side of the pannel board including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
111Motor base plate made with M.S. angle with one coat of red oxide primer and two coats of powder coated paint suitable to cover centrifugal monoblock pump set from 10 HP to 15 HP and having provision for hole for fixing nut & bolt of approved brand include all cost, convyance, cess etc. complete as per the direction of the Engineer-In-Charge but excluding cost of GST including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
112Base frame for panel (size 0.40mx0.20m) made with 3 size M.S. channel having suitable holes for fitting of panel Board, coloured with one coat of red oxide primer and two coats of powder coated paint of approved quality & Base frame for motor (size 0.50mx0.27m) made with 3 size M.S. channel having suitable holes for fittings of different size and make 3 phase centrifugal monoblock pump set from 10 HP. to 15 H.P. coloured with one coat of red oxide primer & two coats of powder coated paint of approved quality including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
11363 AMP Triple Pole Main swith confirming to IS No.4064(Part I & II) with ISI marking of reputed company with utilisation capacity cagegory AC- 22 including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
1144KVAR Power Shunt Capacitor with ISI mark of reputed company including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
1154.0 mm2 PVC Single Core Copper Wire ISI mark of reputed Company including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
116100mm dia nominal bore G.I.pipe having wall thickness 4.5mm electrical resistance welded of medium class confirming to IS- 1239(part-1/2004) with latest ammendments, screwed at both ends as per IS-554 with socketed at one end and the other end protected with plastic threaded protector including its transportation and unloading at L.I.P. site. The socket confirming to ISI 1239(part II/1992) with latest ammendments in random length of 4 to 7 mtr.Each pipe should bear IS certification and manufacturers name/trade mark including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
117Labour charges for laying and fitting of 100 mm dia G.I. pipe complete including cost of labour, T&P required, transportation to site from site stock yard, cess etc complete except GST as per direction of Engineer-in-Charge.
118100mm dia G.I.Bend ( Medium Duty) conforming to IS No-1239 (part II/1992) with ISI mark of reputed company including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
119100mm dia G.I.Flange ( Medium Duty) conforming to IS No-6392/1971 with ISI mark of reputed company including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
120100mm dia G.I.Socket ( Medium Duty) with ISI mark of reputed company including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
121Cost of 100x100x25 mm Ø G.I. priming Tee with plug including cost transportation, cess etc. complete except GST
122100mm dia C.I.Double Flanged Non Return Valve swing type PN-1.0 (IS-5312(Part-I-2004) with bypass arrangement with ISI mark of reputed company including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
123100mm dia C.I. Screw boss Foot Valve of swing type friction less with single disc conforming to IS-4038/1979 of reputed brand with ISI mark of reputed company having wide dealership network including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
124150mm dia C.I. Butter Fly Valve BS:5155/15: 13095-CI MOC Lever Operated PN-1.0 with ISI mark of reputed company including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
125Nuts and Bolts including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
126Thick Rubber Insertion 3mm thick including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
127160mmx160mmx110mm dia Weldless G.I.Tee (3.6mm thickness and min. height of 1.2 mtr.) with bend, closing and opening arrangement of reputed company including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
12850mm dia C.I.Air Release Valve (single action) with saddle and Raiser pipe conforming to IS 14845 (SI) with ISI mark from reputed company including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
129160mmX110mm G.I. Reducer ( Medium Duty) with ISI mark of reputed company including cost of material, transportation, cess etc. complete except GST
130160mm dia. HDPE Bend including cost of material, transportation, cess etc. complete except GST
131Cost of supplying of 160 MM HDPE End cap of ISI marked HDPE pipe fitting materials for High Density Polythelene (HDPE) Pipes for water supply of different nominal diameter as per ISI speifications including the rates of ex-factory, transportation, Cess etc complete but excluding cost of GST.
132Cost of supplying of 160X160X160 mm HDPE Tee spigot design 6 kgof ISI marked HDPE pipe fitting materials for High Density Polythelene (HDPE) Pipes for water supply of different nominal diameter as per ISI speifications including the rates of ex-factory, transportation, Cess etc complete but excluding cost of GST.
133Cost of supplying of 160 mm slipon flange of ISI marked HDPE pipe fitting materials for High Density Polythelene (HDPE) Pipes for water supply of different nominal diameter as per ISI speifications including the rates of ex-factory, transportation, Cess etc complete but excluding cost of GST.
134LALITAGIRI-II RL:Earth work in excavation of foundation in hard soil within 50 m initial lead & 1.5 M initial lift including dressing & levelling the bed & depositing excavated materials within above lead & lift including cost of all T&P required for the work, cost of transportation, cess etc complete except GST as per instruction of Engineer-in-Charge.
135Filling in F&P with excavated materials including well watered and rammed including cost of all T&P required for the work, cost of transportation, cess etc complete except GST as per instruction of Engineer-in-Charge.
136Filling in F & P with sand well watered and rammed including cost of all materials, T&P required for the work, cost of transportation, cess, royalty etc complete except GST as per instruction of Engineer-in-Charge.
137Cement concrete (1:4:8) with 4cm (1½”) size hard granite metal C.B. metal of approved quality from approved quarry with required ramming,watering and curring etc. complete including cost, royalty & convence charges of all material to work site, supply of cement,T&P required, royalty etc. complete except GST as per the direction of the Engineer-in-charge.
138C.C. (1:2:4) with 12mm (½”) size hard granite chips (crusher broken) of approved quality from approved quarry with ramming, watering and curring etc. complete with cost of all materials involved like supply of cement including cost of all T&P required for the work, cost of transportation, cess, royalty etc complete except GST as per instruction of Engineer-in-Charge.
139Reinforced Cement concrete (1:2:4) with 12mm (½”) size hard granite chips (Crusher broken) for RCC works including hoisting and laying with approved quality from approved quarry with ramming, watering and curring etc. complete with cost of all materials involved like supply of cement including cost of all T&P required for the work, cost of transportation, cess, royalty etc complete except GST as per instruction of Engineer-in-Charge.
140Supplying, straightening, cutting, bending, binding, fitting,placing and fixing uncoated HYSD bar reinforcement etc complete including supplying, straightening, cutting, bending, binding & tying the grills & placing in position including cost of binding wire 18 to 20 guage per Qntl. including cost of HYSD Still Bar (FE 415/ FE 500) and including cost of all T&P required for the work, cost of transportation, cess etc complete except GST as per instruction of Engineer-in-Charge.
141Rigid smooth centering shuttering for R.C.C. work including false work and dismantling then after casting including cost of all cost etc. complete for R.C.C. floor & Roof slab Landing Balcony, Projection sun shed & Chajja, Shelves Data including cost of all materials, T&P required for the work, cost of transportation, cess etc complete except GST as per instruction of Engineer-in-Charge.
142Fly ash Brick (25cm X 12cm X 8cm size having crushing strength not less than 75 kg/cm2) masonary in cm(1:6) in F&P including cost of all materials, T&P required for the work, cost of transportation, cess, royalty etc complete except GST as per instruction of Engineer-in-Charge.
14312mm (½\\") thick C.P. (1:6) over brick works. including cost of all materials, T&P required for the work, cost of transportation, cess, royalty etc complete except GST as per instruction of Engineer-in-Charge.
144Cement punning including cost of all materials, T&P required for the work, cost of transportation, cess, royalty etc complete except GST as per instruction of Engineer-in-Charge.
145White washing 2 coats with shell lime per 1 Sqm. including cost of all materials, T&P required for the work, cost of transportation, cess etc complete except GST as per instruction of Engineer-in-Charge.
146Labour charges for letter writting on display board in black colour on yellow back ground painting including cost of material, labour etc. including cost of materials, labour, T&P required, transportation to site from site stock yard, cess etc complete except GST as per direction of Engineer-in-Charge.
147Cost of laying & fitting of ARV, BFV and Weldless G.I. Tees with distribution pipe line including labour, T&P required, transportation to site from site stock yard, cess etc complete except GST as per direction of Engineer-in-Charge.
148Cost of Foundation Nut bolt including labour charges for fitting at work site including cost of T&P required, transportation to site from, cess etc complete except GST as per direction of Engineer-in-Charge.
149Cost of construction of outlet, fitting of short piece of PVC pipe and soil errossion minimisation arrrangements including cost of labour, T&P required, transportation to site stock yard, from site stock yard, cess etc complete except GST as per direction of Engineer-in-Charge.
150Supply of 160mm dia HDPE PE 80- PN 4 ISI marked High Density Polyethylene (HDPE) Pipes for water supply as per IS-4984/2016 with proper grade and pressure rating including ex-factory rate, entire cost involved in Pre-delivery test & Post delivery test with correspoding test marking on the body of pipes along with name & address of manufacturer, cost of transportation from factory to project site stock yard including loading & unloading, storage at site stock yard, watch and ward etc. and handing over to Pani Panchayat President or Secretary with due approval of authority including all taxes and cess etc. complete but excluding cost of GST. Pre-delivery test & Post deliver tests are to be conducted at the facility of CIPET, Bhubaneswar and test reports thus obtained from CIPET, Bhubaneswar are to be submitted to the Engineer-in-Charge.
151Fitting of 160mm dia HDPE PE 80- PN 4 ISI marked High Density Polyethylene (HDPE) Pipes for water supply as per IS-4984/2016 with proper grade and pressure rating with supply of all required accessories materials, labour, T&P for jointing of 160mm dia High Density Polyethylene Pipes by butt fusion welding method as per specification & laying in trenches with desired leveling, testing including fitting and fixing up of required no. of attachments for Outlets and Shaddles and Riser Nipples, fitting air valve, equal Tee etc. complete including cost of transportation from stock yard to work site complete as per direction of the Engineer-in-Charge.
152Earth work in hard soil such as hard stiff clay,stiff black cotton,hard red earth,shales,moorum ordinary gravels within 50m initial lead and 1.5m initial lift including rough dressing & breaking of clods and stacking rubble or spreading and levelling within the site as the case may be etc.complete including cost of all T&P required for the work, cost of transportation, cess etc complete except GST as per direction of the Engineer-in-charge.(Mechanical 60% & Manual 40%)
153Filling in F & P with excavated materials, after laying and fitting of HDPE/PVC pipes with fitting items, including well watering and ramming in hard soil such as hard stiff clay,stiff black cotton,hard red earth, shales, moorum ordinary gravels within 50m initial lead and 1.5m initial lift including rough dressing & breaking of clods and stacking rubble or spreading and levelling within the site as the case may be etc.complete including cost of all T&P required for the work, cost of transportation, cess etc complete except GST as per direction of the Engineer-in-charge. (Mechanical 60% & Manual 40%)
154Electrical Earthing including including cost of materials, labour, T&P required, transportation to site from site stock yard, cess etc complete except GST as per direction of Engineer-in-Charge.
155Electrical installation and energisation including cost of switchs, sockets, angle holder, 4 nos.bulbs, conduit pipe, 0.75 sqmm wire, 1.50 sqmm wire, 2.50 sqmm wire, 4.0 sqmm wire, 4 nos. of switch boards etc. including cost of labour, T&P required, transportation to site, from site stock yard, cess etc complete except GST as per direction of Engineer-in-Charge.
156Control Pannel with Automatic Star delta Starter, sheet steel enclosure suitable for operation of Squirrel cage induction motor up to 15 HP with 20 Amp (AC -3) duty contractor at 415 Volt+6%-15%, 3 phase, 50 Hz AC supply with over load relay range 8.9 to 13.5 Amp & no volt coil with electronic timer suitable for operation at voltage range of 300 to 440 V. The Starter should provide dependable protection against over load and single phasing fitted with Volt Meter, Ameter, MCB in complete shape including Indicator Lamp including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
1574.0 mm2 PVC Single Core Copper Wire ISI mark of reputed Company including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
158100mm dia C.I.Double Flanged Non Return Valve swing type PN-1.0 (IS-5312(Part-I-2004) with bypass arrangement with ISI mark of reputed company including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
159150mm dia C.I. Butter Fly Valve BS:5155/15: 13095-CI MOC Lever Operated PN-1.0 with ISI mark of reputed company including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
160Nuts and Bolts including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
161Thick Rubber Insertion 3mm thick including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
162160mmx160mmx110mm dia Weldless G.I.Tee (3.6mm thickness and min. height of 1.2 mtr.) with bend, closing and opening arrangement of reputed company including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
16350mm dia C.I.Air Release Valve (single action) with saddle and Raiser pipe conforming to IS 14845 (SI) with ISI mark from reputed company including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
164160mm dia. HDPE Bend including cost of material, transportation, cess etc. complete except GST
165Cost of supplying of 160 MM HDPE End cap of ISI marked HDPE pipe fitting materials for High Density Polythelene (HDPE) Pipes for water supply of different nominal diameter as per ISI speifications including the rates of ex-factory, transportation, Cess etc complete but excluding cost of GST.
166Cost of supplying of 160X160X160 mm HDPE Tee spigot design 6 kgof ISI marked HDPE pipe fitting materials for High Density Polythelene (HDPE) Pipes for water supply of different nominal diameter as per ISI speifications including the rates of ex-factory, transportation, Cess etc complete but excluding cost of GST.
167Cost of supplying of 160 mm slipon flange of ISI marked HDPE pipe fitting materials for High Density Polythelene (HDPE) Pipes for water supply of different nominal diameter as per ISI speifications including the rates of ex-factory, transportation, Cess etc complete but excluding cost of GST.
168LALITAGIRI-III RL:Earth work in excavation of foundation in hard soil within 50 m initial lead & 1.5 M initial lift including dressing & levelling the bed & depositing excavated materials within above lead & lift including cost of all T&P required for the work, cost of transportation, cess etc complete except GST as per instruction of Engineer-in-Charge.
169Filling in F&P with excavated materials including well watered and rammed including cost of all T&P required for the work, cost of transportation, cess etc complete except GST as per instruction of Engineer-in-Charge.
170Filling in F & P with sand well watered and rammed including cost of all materials, T&P required for the work, cost of transportation, cess, royalty etc complete except GST as per instruction of Engineer-in-Charge.
171Cement concrete (1:4:8) with 4cm (1½”) size hard granite metal C.B. metal of approved quality from approved quarry with required ramming,watering and curring etc. complete including cost, royalty & convence charges of all material to work site, supply of cement,T&P required, royalty etc. complete except GST as per the direction of the Engineer-in-charge.
172C.C. (1:2:4) with 12mm (½”) size hard granite chips (crusher broken) of approved quality from approved quarry with ramming, watering and curring etc. complete with cost of all materials involved like supply of cement including cost of all T&P required for the work, cost of transportation, cess, royalty etc complete except GST as per instruction of Engineer-in-Charge.
173Reinforced Cement concrete (1:2:4) with 12mm (½”) size hard granite chips (Crusher broken) for RCC works including hoisting and laying with approved quality from approved quarry with ramming, watering and curring etc. complete with cost of all materials involved like supply of cement including cost of all T&P required for the work, cost of transportation, cess, royalty etc complete except GST as per instruction of Engineer-in-Charge.
174Supplying, straightening, cutting, bending, binding, fitting,placing and fixing uncoated HYSD bar reinforcement etc complete including supplying, straightening, cutting, bending, binding & tying the grills & placing in position including cost of binding wire 18 to 20 guage per Qntl. including cost of HYSD Still Bar (FE 415/ FE 500) and including cost of all T&P required for the work, cost of transportation, cess etc complete except GST as per instruction of Engineer-in-Charge.
175Rigid smooth centering shuttering for R.C.C. work including false work and dismantling then after casting including cost of all cost etc. complete for R.C.C. floor & Roof slab Landing Balcony, Projection sun shed & Chajja, Shelves Data including cost of all materials, T&P required for the work, cost of transportation, cess etc complete except GST as per instruction of Engineer-in-Charge.
176Fly ash Brick (25cm X 12cm X 8cm size having crushing strength not less than 75 kg/cm2) masonary in cm(1:6) in F&P including cost of all materials, T&P required for the work, cost of transportation, cess, royalty etc complete except GST as per instruction of Engineer-in-Charge.
17712mm (½\\") thick C.P. (1:6) over brick works. including cost of all materials, T&P required for the work, cost of transportation, cess, royalty etc complete except GST as per instruction of Engineer-in-Charge.
178Cement punning including cost of all materials, T&P required for the work, cost of transportation, cess, royalty etc complete except GST as per instruction of Engineer-in-Charge.
179White washing 2 coats with shell lime per 1 Sqm. including cost of all materials, T&P required for the work, cost of transportation, cess etc complete except GST as per instruction of Engineer-in-Charge.
180Labour charges for letter writting on display board in black colour on yellow back ground painting including cost of material, labour etc. including cost of materials, labour, T&P required, transportation to site from site stock yard, cess etc complete except GST as per direction of Engineer-in-Charge.
181Cost of laying & fitting of ARV, BFV and Weldless G.I. Tees with distribution pipe line including labour, T&P required, transportation to site from site stock yard, cess etc complete except GST as per direction of Engineer-in-Charge.
182Cost of Foundation Nut bolt including labour charges for fitting at work site including cost of T&P required, transportation to site from, cess etc complete except GST as per direction of Engineer-in-Charge.
183Cost of construction of outlet, fitting of short piece of PVC pipe and soil errossion minimisation arrrangements including cost of labour, T&P required, transportation to site stock yard, from site stock yard, cess etc complete except GST as per direction of Engineer-in-Charge.
184Labour charges for Installation of MB pumpset, fitting with delivery line including fitting of Priming Tee, Sluice Valve, NR Valve, PVC Tee, fixing suction and delivery pipe to pump set, Foot Valve and other fitting materials including cutting, welding etc. complete including cost of welding materials, labour, T&P required, transportation of materials to site from site stock yard, cess etc complete except GST as per direction of Engineer-in-Charge.
185Supply of 160mm dia HDPE PE 80- PN 4 ISI marked High Density Polyethylene (HDPE) Pipes for water supply as per IS-4984/2016 with proper grade and pressure rating including ex-factory rate, entire cost involved in Pre-delivery test & Post delivery test with correspoding test marking on the body of pipes along with name & address of manufacturer, cost of transportation from factory to project site stock yard including loading & unloading, storage at site stock yard, watch and ward etc. and handing over to Pani Panchayat President or Secretary with due approval of authority including all taxes and cess etc. complete but excluding cost of GST. Pre-delivery test & Post deliver tests are to be conducted at the facility of CIPET, Bhubaneswar and test reports thus obtained from CIPET, Bhubaneswar are to be submitted to the Engineer-in-Charge.
186Fitting of 160mm dia HDPE PE 80- PN 4 ISI marked High Density Polyethylene (HDPE) Pipes for water supply as per IS-4984/2016 with proper grade and pressure rating with supply of all required accessories materials, labour, T&P for jointing of 160mm dia High Density Polyethylene Pipes by butt fusion welding method as per specification & laying in trenches with desired leveling, testing including fitting and fixing up of required no. of attachments for Outlets and Shaddles and Riser Nipples, fitting air valve, equal Tee etc. complete including cost of transportation from stock yard to work site complete as per direction of the Engineer-in-Charge.
187Earth work in hard soil such as hard stiff clay,stiff black cotton,hard red earth,shales,moorum ordinary gravels within 50m initial lead and 1.5m initial lift including rough dressing & breaking of clods and stacking rubble or spreading and levelling within the site as the case may be etc.complete including cost of all T&P required for the work, cost of transportation, cess etc complete except GST as per direction of the Engineer-in-charge.(Mechanical 60% & Manual 40%)
188Filling in F & P with excavated materials, after laying and fitting of HDPE/PVC pipes with fitting items, including well watering and ramming in hard soil such as hard stiff clay,stiff black cotton,hard red earth, shales, moorum ordinary gravels within 50m initial lead and 1.5m initial lift including rough dressing & breaking of clods and stacking rubble or spreading and levelling within the site as the case may be etc.complete including cost of all T&P required for the work, cost of transportation, cess etc complete except GST as per direction of the Engineer-in-charge. (Mechanical 60% & Manual 40%)
189Electrical Earthing including including cost of materials, labour, T&P required, transportation to site from site stock yard, cess etc complete except GST as per direction of Engineer-in-Charge.
190Electrical installation and energisation including cost of switchs, sockets, angle holder, 4 nos.bulbs, conduit pipe, 0.75 sqmm wire, 1.50 sqmm wire, 2.50 sqmm wire, 4.0 sqmm wire, 4 nos. of switch boards etc. including cost of labour, T&P required, transportation to site, from site stock yard, cess etc complete except GST as per direction of Engineer-in-Charge.
191Monoblock pump set total head of 18 mtrs capable to discharge 1700 LPM with 10 HP/7.50 KW squirrel cage induction motor fitted with bronze impeller TB-2 of IS 318/1981, companion flanges & Class \\"F\\"insulation suitable for operation 415 volt +6%-15% 3 phase, 50Hz AC poweer supply suction/deliveery= 100mmx100mm with BEE Star rated energy efficiency Pump & as per IS-9079/2002 with overall efficiency 62 to 65% of reputed brand having wide dealership net work for easy availability of spares.The materials of construction as given below (a) Casing: FC 200 as per IS 210/1978 (b) Impeller: Bronze grade LTB-2 of IS 318/1981 including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
192Control Pannel with Automatic Star delta Starter, sheet steel enclosure suitable for operation of Squirrel cage induction motor up to 15 HP with 20 Amp (AC -3) duty contractor at 415 Volt+6%-15%, 3 phase, 50 Hz AC supply with over load relay range 8.9 to 13.5 Amp & no volt coil with electronic timer suitable for operation at voltage range of 300 to 440 V. The Starter should provide dependable protection against over load and single phasing fitted with Volt Meter, Ameter, MCB in complete shape including Indicator Lamp including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
193Motor hood size (0.45mx0.45mx0.60m) made with 18 SWG (cold rolled M.S.Sheet with one coat of red axide primer and two coats of powder coated paint of approved quality on both side (inside & outside) suitable to cover centrifugal monoblock Pump Set from 10 HP to 15 HP and having provision for attachement with the groves on rear side of the pannel board including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
194Motor base plate made with M.S. angle with one coat of red oxide primer and two coats of powder coated paint suitable to cover centrifugal monoblock pump set from 10 HP to 15 HP and having provision for hole for fixing nut & bolt of approved brand include all cost, convyance, cess etc. complete as per the direction of the Engineer-In-Charge but excluding cost of GST including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
195Base frame for panel (size 0.40mx0.20m) made with 3 size M.S. channel having suitable holes for fitting of panel Board, coloured with one coat of red oxide primer and two coats of powder coated paint of approved quality & Base frame for motor (size 0.50mx0.27m) made with 3 size M.S. channel having suitable holes for fittings of different size and make 3 phase centrifugal monoblock pump set from 10 HP. to 15 H.P. coloured with one coat of red oxide primer & two coats of powder coated paint of approved quality including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
1964.0 mm2 PVC Single Core Copper Wire ISI mark of reputed Company including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
197100mm dia G.I.Bend ( Medium Duty) conforming to IS No-1239 (part II/1992) with ISI mark of reputed company including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
198Cost of 100x100x25 mm Ø G.I. priming Tee with plug including cost transportation, cess etc. complete except GST
199100mm dia C.I. Screw boss Foot Valve of swing type friction less with single disc conforming to IS-4038/1979 of reputed brand with ISI mark of reputed company having wide dealership network including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
200150mm dia C.I. Butter Fly Valve BS:5155/15: 13095-CI MOC Lever Operated PN-1.0 with ISI mark of reputed company including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
201Nuts and Bolts including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
202Thick Rubber Insertion 3mm thick including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
203160mmx160mmx110mm dia Weldless G.I.Tee (3.6mm thickness and min. height of 1.2 mtr.) with bend, closing and opening arrangement of reputed company including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
20450mm dia C.I.Air Release Valve (single action) with saddle and Raiser pipe conforming to IS 14845 (SI) with ISI mark from reputed company including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
205160mm dia. HDPE Bend including cost of material, transportation, cess etc. complete except GST
206Cost of supplying of 160 MM HDPE End cap of ISI marked HDPE pipe fitting materials for High Density Polythelene (HDPE) Pipes for water supply of different nominal diameter as per ISI speifications including the rates of ex-factory, transportation, Cess etc complete but excluding cost of GST.
207Cost of supplying of 160X160X160 mm HDPE Tee spigot design 6 kgof ISI marked HDPE pipe fitting materials for High Density Polythelene (HDPE) Pipes for water supply of different nominal diameter as per ISI speifications including the rates of ex-factory, transportation, Cess etc complete but excluding cost of GST.
208Cost of supplying of 160 mm slipon flange of ISI marked HDPE pipe fitting materials for High Density Polythelene (HDPE) Pipes for water supply of different nominal diameter as per ISI speifications including the rates of ex-factory, transportation, Cess etc complete but excluding cost of GST.
209LALITAGIRI-VII RL:Earth work in excavation of foundation in hard soil within 50 m initial lead & 1.5 M initial lift including dressing & levelling the bed & depositing excavated materials within above lead & lift including cost of all T&P required for the work, cost of transportation, cess etc complete except GST as per instruction of Engineer-in-Charge.
210Filling in F&P with excavated materials including well watered and rammed including cost of all T&P required for the work, cost of transportation, cess etc complete except GST as per instruction of Engineer-in-Charge.
211Filling in F & P with sand well watered and rammed including cost of all materials, T&P required for the work, cost of transportation, cess, royalty etc complete except GST as per instruction of Engineer-in-Charge.
212Cement concrete (1:4:8) with 4cm (1½”) size hard granite metal C.B. metal of approved quality from approved quarry with required ramming,watering and curring etc. complete including cost, royalty & convence charges of all material to work site, supply of cement,T&P required, royalty etc. complete except GST as per the direction of the Engineer-in-charge.
213C.C. (1:2:4) with 12mm (½”) size hard granite chips (crusher broken) of approved quality from approved quarry with ramming, watering and curring etc. complete with cost of all materials involved like supply of cement including cost of all T&P required for the work, cost of transportation, cess, royalty etc complete except GST as per instruction of Engineer-in-Charge.
214Reinforced Cement concrete (1:2:4) with 12mm (½”) size hard granite chips (Crusher broken) for RCC works including hoisting and laying with approved quality from approved quarry with ramming, watering and curring etc. complete with cost of all materials involved like supply of cement including cost of all T&P required for the work, cost of transportation, cess, royalty etc complete except GST as per instruction of Engineer-in-Charge.
215Supplying, straightening, cutting, bending, binding, fitting,placing and fixing uncoated HYSD bar reinforcement etc complete including supplying, straightening, cutting, bending, binding & tying the grills & placing in position including cost of binding wire 18 to 20 guage per Qntl. including cost of HYSD Still Bar (FE 415/ FE 500) and including cost of all T&P required for the work, cost of transportation, cess etc complete except GST as per instruction of Engineer-in-Charge.
216Rigid smooth centering shuttering for R.C.C. work including false work and dismantling then after casting including cost of all cost etc. complete for R.C.C. floor & Roof slab Landing Balcony, Projection sun shed & Chajja, Shelves Data including cost of all materials, T&P required for the work, cost of transportation, cess etc complete except GST as per instruction of Engineer-in-Charge.
217Fly ash Brick (25cm X 12cm X 8cm size having crushing strength not less than 75 kg/cm2) masonary in cm(1:6) in F&P including cost of all materials, T&P required for the work, cost of transportation, cess, royalty etc complete except GST as per instruction of Engineer-in-Charge.
21812mm (½\\") thick C.P. (1:6) over brick works. including cost of all materials, T&P required for the work, cost of transportation, cess, royalty etc complete except GST as per instruction of Engineer-in-Charge.
219Cement punning including cost of all materials, T&P required for the work, cost of transportation, cess, royalty etc complete except GST as per instruction of Engineer-in-Charge.
220White washing 2 coats with shell lime per 1 Sqm. including cost of all materials, T&P required for the work, cost of transportation, cess etc complete except GST as per instruction of Engineer-in-Charge.
221Labour charges for letter writting on display board in black colour on yellow back ground painting including cost of material, labour etc. including cost of materials, labour, T&P required, transportation to site from site stock yard, cess etc complete except GST as per direction of Engineer-in-Charge.
222Cost of laying & fitting of ARV, BFV and Weldless G.I. Tees with distribution pipe line including labour, T&P required, transportation to site from site stock yard, cess etc complete except GST as per direction of Engineer-in-Charge.
223Cost of Foundation Nut bolt including labour charges for fitting at work site including cost of T&P required, transportation to site from, cess etc complete except GST as per direction of Engineer-in-Charge.
224Cost of construction of outlet, fitting of short piece of PVC pipe and soil errossion minimisation arrrangements including cost of labour, T&P required, transportation to site stock yard, from site stock yard, cess etc complete except GST as per direction of Engineer-in-Charge.
225Labour charges for Installation of MB pumpset, fitting with delivery line including fitting of Priming Tee, Sluice Valve, NR Valve, PVC Tee, fixing suction and delivery pipe to pump set, Foot Valve and other fitting materials including cutting, welding etc. complete including cost of welding materials, labour, T&P required, transportation of materials to site from site stock yard, cess etc complete except GST as per direction of Engineer-in-Charge.
226Supply of 160mm dia HDPE PE 80- PN 4 ISI marked High Density Polyethylene (HDPE) Pipes for water supply as per IS-4984/2016 with proper grade and pressure rating including ex-factory rate, entire cost involved in Pre-delivery test & Post delivery test with correspoding test marking on the body of pipes along with name & address of manufacturer, cost of transportation from factory to project site stock yard including loading & unloading, storage at site stock yard, watch and ward etc. and handing over to Pani Panchayat President or Secretary with due approval of authority including all taxes and cess etc. complete but excluding cost of GST. Pre-delivery test & Post deliver tests are to be conducted at the facility of CIPET, Bhubaneswar and test reports thus obtained from CIPET, Bhubaneswar are to be submitted to the Engineer-in-Charge.
227Fitting of 160mm dia HDPE PE 80- PN 4 ISI marked High Density Polyethylene (HDPE) Pipes for water supply as per IS-4984/2016 with proper grade and pressure rating with supply of all required accessories materials, labour, T&P for jointing of 160mm dia High Density Polyethylene Pipes by butt fusion welding method as per specification & laying in trenches with desired leveling, testing including fitting and fixing up of required no. of attachments for Outlets and Shaddles and Riser Nipples, fitting air valve, equal Tee etc. complete including cost of transportation from stock yard to work site complete as per direction of the Engineer-in-Charge.
228Earth work in hard soil such as hard stiff clay,stiff black cotton,hard red earth,shales,moorum ordinary gravels within 50m initial lead and 1.5m initial lift including rough dressing & breaking of clods and stacking rubble or spreading and levelling within the site as the case may be etc.complete including cost of all T&P required for the work, cost of transportation, cess etc complete except GST as per direction of the Engineer-in-charge.(Mechanical 60% & Manual 40%)
229Filling in F & P with excavated materials, after laying and fitting of HDPE/PVC pipes with fitting items, including well watering and ramming in hard soil such as hard stiff clay,stiff black cotton,hard red earth, shales, moorum ordinary gravels within 50m initial lead and 1.5m initial lift including rough dressing & breaking of clods and stacking rubble or spreading and levelling within the site as the case may be etc.complete including cost of all T&P required for the work, cost of transportation, cess etc complete except GST as per direction of the Engineer-in-charge. (Mechanical 60% & Manual 40%)
230Electrical Earthing including including cost of materials, labour, T&P required, transportation to site from site stock yard, cess etc complete except GST as per direction of Engineer-in-Charge.
231Electrical installation and energisation including cost of switchs, sockets, angle holder, 4 nos.bulbs, conduit pipe, 0.75 sqmm wire, 1.50 sqmm wire, 2.50 sqmm wire, 4.0 sqmm wire, 4 nos. of switch boards etc. including cost of labour, T&P required, transportation to site, from site stock yard, cess etc complete except GST as per direction of Engineer-in-Charge.
232Monoblock pump set total head of 18 mtrs capable to discharge 1700 LPM with 10 HP/7.50 KW squirrel cage induction motor fitted with bronze impeller TB-2 of IS 318/1981, companion flanges & Class \\"F\\"insulation suitable for operation 415 volt +6%-15% 3 phase, 50Hz AC poweer supply suction/deliveery= 100mmx100mm with BEE Star rated energy efficiency Pump & as per IS-9079/2002 with overall efficiency 62 to 65% of reputed brand having wide dealership net work for easy availability of spares.The materials of construction as given below (a) Casing: FC 200 as per IS 210/1978 (b) Impeller: Bronze grade LTB-2 of IS 318/1981 including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
233Control Pannel with Automatic Star delta Starter, sheet steel enclosure suitable for operation of Squirrel cage induction motor up to 15 HP with 20 Amp (AC -3) duty contractor at 415 Volt+6%-15%, 3 phase, 50 Hz AC supply with over load relay range 8.9 to 13.5 Amp & no volt coil with electronic timer suitable for operation at voltage range of 300 to 440 V. The Starter should provide dependable protection against over load and single phasing fitted with Volt Meter, Ameter, MCB in complete shape including Indicator Lamp including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
234Motor hood size (0.45mx0.45mx0.60m) made with 18 SWG (cold rolled M.S.Sheet with one coat of red axide primer and two coats of powder coated paint of approved quality on both side (inside & outside) suitable to cover centrifugal monoblock Pump Set from 10 HP to 15 HP and having provision for attachement with the groves on rear side of the pannel board including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
235Motor base plate made with M.S. angle with one coat of red oxide primer and two coats of powder coated paint suitable to cover centrifugal monoblock pump set from 10 HP to 15 HP and having provision for hole for fixing nut & bolt of approved brand include all cost, convyance, cess etc. complete as per the direction of the Engineer-In-Charge but excluding cost of GST including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
236Base frame for panel (size 0.40mx0.20m) made with 3 size M.S. channel having suitable holes for fitting of panel Board, coloured with one coat of red oxide primer and two coats of powder coated paint of approved quality & Base frame for motor (size 0.50mx0.27m) made with 3 size M.S. channel having suitable holes for fittings of different size and make 3 phase centrifugal monoblock pump set from 10 HP. to 15 H.P. coloured with one coat of red oxide primer & two coats of powder coated paint of approved quality including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
2374.0 mm2 PVC Single Core Copper Wire ISI mark of reputed Company including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
238100mm dia G.I.Bend ( Medium Duty) conforming to IS No-1239 (part II/1992) with ISI mark of reputed company including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
239Cost of 100x100x25 mm Ø G.I. priming Tee with plug including cost transportation, cess etc. complete except GST
240100mm dia C.I. Screw boss Foot Valve of swing type friction less with single disc conforming to IS-4038/1979 of reputed brand with ISI mark of reputed company having wide dealership network including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
241150mm dia C.I. Butter Fly Valve BS:5155/15: 13095-CI MOC Lever Operated PN-1.0 with ISI mark of reputed company including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
242Nuts and Bolts including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
243Thick Rubber Insertion 3mm thick including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
244160mmx160mmx110mm dia Weldless G.I.Tee (3.6mm thickness and min. height of 1.2 mtr.) with bend, closing and opening arrangement of reputed company including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
24550mm dia C.I.Air Release Valve (single action) with saddle and Raiser pipe conforming to IS 14845 (SI) with ISI mark from reputed company including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
246160mm dia. HDPE Bend including cost of material, transportation, cess etc. complete except GST
247Cost of supplying of 160 MM HDPE End cap of ISI marked HDPE pipe fitting materials for High Density Polythelene (HDPE) Pipes for water supply of different nominal diameter as per ISI speifications including the rates of ex-factory, transportation, Cess etc complete but excluding cost of GST.
248Cost of supplying of 160X160X160 mm HDPE Tee spigot design 6 kgof ISI marked HDPE pipe fitting materials for High Density Polythelene (HDPE) Pipes for water supply of different nominal diameter as per ISI speifications including the rates of ex-factory, transportation, Cess etc complete but excluding cost of GST.
249Cost of supplying of 160 mm slipon flange of ISI marked HDPE pipe fitting materials for High Density Polythelene (HDPE) Pipes for water supply of different nominal diameter as per ISI speifications including the rates of ex-factory, transportation, Cess etc complete but excluding cost of GST. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58604577
AUTHORITY Government Departments
TENDER VALUE 58.35 Lakhs
LAST DATE 03-12-2026
Authority
Authority Name Orissa Lift Irrigation Corporation Limited
Work Description Tender for Reinforcement Of Koliatha-I Tw, Koliatha-Vii Tw, Raghunathpur-I Rl, Lalitagiri-Ii Rl, Lalitagiri-Iii Rl & Lalitagiri-Vii Rl L.I. Projects Of Mahanga Block In Kataka District Under State Plan 2026-27(Ren)
Basic Detail
Tender No BID ID NO.22/Dt.13.11.2026
Bidding Type Tender
Location
City Cuttack
State Odisha
Key Dates
Publish Date 19 Nov 2026
Submission Date 03 Dec 2026
Open Date 04 Dec 2026
Finance
Tender Value 58.35 Lakhs
Tender Fee 11800
EMD 58358
Exemption Available
Document List
2a2a9262-da81-4006-beb0-df371d7986f4.html
BOQ_621797.xls
DTCNFINAL22.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 19, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 03, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 11 days
Dec 04, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 12 days

Tender Documents

Download All (ZIP) ↓
html

2a2a9262-da81-4006-beb0-df371d7986f4.html

xls

BOQ_621797.xls

pdf

DTCNFINAL22.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender