Rural Development Government Departments Closing in 5 days TDR #58604455

Tender For Construction Of Medicine Room And Compound Wall At Veterinary Hospital Dolkhamb, Taluka Shahapur, District Thane.

Issued by Government Departments · Thane, Maharashtra
Tender Value
12.49 Lakhs
Estimated cost
Bid Submission
27 Nov 2026
5 days left
EMD
12495
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Thane → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Construction Of Medicine Room And Compound Wall At Veterinary Hospital Dolkhamb, Taluka Shahapur, District Thane.

BOQ

Name of Work:- Construction Of Medicine Room And Compound Wall At Veterinary Hospital Dolkhamb, Taluka Shahapur, District Thane.
Sl. No. Item Description
1Dismantling brickmasonry in lime or cement mortar and stacking thematerils asdirected with all leads, lifts etc.
2Dismantling stone masonry in lime or cement mortar including stacking thematerils as directed with all leads, lifts etc.
3Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means
4Excavation for foundation in Hard murum including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5 to 3.0m.) By Mechanical Means
5Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thickincluding hand packing and compacting etc. complete.
6Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
7Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite/quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering, formwork ,cover blocks, laying/pumping, compaction and curing roughening the surface if special finish is to be provided (Excludingreinforcement andstructural steel)etc. complete,withfullyautomaticmicro processorbasedPLCwithSCADAenabledreversibleDrumTypemixer/concreteBatch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
8Providing and laying Cast in situ/ReadyMix cement concrete M-25 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formedsurfaceswithcementmortar 1:3of sufficientminimumthicknesstogiveasmooth andevensurfaceorrougheningifspecial finishistobeprovided andcuringetc.complete,(Excludingreinforcementandstructural steel).withfullyautomaticmicroprocessorbasedPLCwithSCADAenabledreversible DrumTypemixer/ concreteBatchmix plant (Panmixer) etc. complete.With fine aggregate (Crushed sand VSI Grade)
9Providing and laying Cast in situ/ReadyMix cement concrete inM-25 of trap/ granite/quartzite/gneissmetal forR.C.C.beamsandlintelsasperdetaileddesignsand drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionandrougheningthesurfaceifspecialfinishistobeprovided andcuring etc. complete. (Excluding reinforcement and structural steel).with fully automaticmicro processor based PLCwithSCADAenabled reversibleDrumType mixer/ concrete Batch mix plant (Pan mixer) etc. complete.With fine aggregate (Crushed sand VSI Grade)
10Providing and laying Cast in situ/Ready Mix cement concrete M-15 oftrap/ granite/quartzite/gneiss metal for coping to plinth or parapet, moulded orchamfered as perdrawing or as directed including steel centering, plywood/ steelformwork compacting,roughening themif special finish is to be provided, finishinguneven and honeycombedsurfaceandcuringetc. complete.TheCementMortar1:3plaster isconsidered for renderingunevenandhoneycombedsurfaceonly.Newly laidconcreteshallbecoveredbygunnybag,plastic, tarpaulinetc.(Woodencenteringwillnotbe allowed.) With fine aggregate (Crushed sand VSI Grade)
11Filling in plinth and floors with approved excavated material in 15cm. to 20cm. layersincluding watering and compacting etc. complete.
12Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering andscaffolding etc. Complete
13Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of 2 bars of 6 mm diameter / 2 hoop iron strips 25 mm X 1.6 mm placed at every third course, properly bent and bonded at ends scaffolding, racking out joints and watering etc. complete.
14Providing and laying Cast in situ/ReadyMix cement concrete M-25 of trap/ granite/ quartzite/gneiss metal forR.C.C. chajja as per detailed design and drawings including steel centering,form work,cover blocks, laying/pumping,compacting and rougheningthe surfaceif specialfinishistobeprovidedandcuringcomplete.(Excludingreinforcement andstructuralsteel).with fully automaticmicro processor based PLCwith SCADA enabled reversible DrumType mixer/ concrete Batch mix plant (Panmixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
15Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap/ granite /quartzite/gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compactionfinishingtheformedsurfaceswithcementmortar1:3ofsufficientminimum thicknesstogiveasmoothandeven surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).withfullyautomaticmicroprocessorbasedPLCwithSCADAenabledreversible DrumTypemixer/ concreteBatchmix plant (Panmixer) etc. complete.With fine aggregate (Crushed sand VSI Grade)
16Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters forR.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.
17Providing and laying in position flooring of telephone black /AmbaWhite /Cat barybrown/Ruby red/Ocean Brown granite stone of approved shade and size 18 mm to 20mm thick on bed 1:6 cement mortar includingcement floats striking joints,pointing inC.M. 1:3 curing and cleaning etc. complete.
18Providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete.
19Providing and fixing acrylic plastic sheet panels of approved quality in required thickness plain clear or any colour or obscured linings in lieu of glass pans to doors/windows including providing and fixing clips, putty etc. complete. (a) 2.00 mm thick.
20Providing and fixing in position. (as per I.S.1868 / 1982) Aluminium sliding window of two tracks with rectangular pipe having overall dimension 63.50 x 38.10 x 1.02 mm at weight0.547 Kilogram/Running metre. and window frame bottom track section 61.85 x 31.75 x 1.20 mm at weight 0.695 Kilogram/Running metre. Top and side track section 61.85 x 31.75 x1.30 mm at weight 0.659 Kilogram/Running metre. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 Kilogram/Running metre. Inter locking section 40 x 18 x1.10 mm at weight 0.469 Kilogram/Running metre. And handle section 40 x 18 x 1.25 mm at weight 0.417 Kilogram/Running metre. and top section 40 x 18 x 1.25 mm at weight 0.417 Kilogram/Running metre. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass with all required screws and nuts etc, complete. With colour Anodising with box.
21Providing and fixing mild steel grill work for windows, ventilators, etc. 15 Kilogram/Square Metre as per drawing including fixtures necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting complete.
22Providing internal cement plaster 12mm thick in single coat in cement mortar 1:5 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc.complete.
23Providing internal cement plaster 6 mm thick in a single coat in cement mortar 1:3 without neeru finish to concrete surface in all positions including scaffolding and curing etc. complete.
24Providing sand faced plaster externally in cement mortar using approved screened sand, inall positions including base coat of 15 mm thick in cement mortar 1:4 usingwaterproofingcompoundat1Kilogrampercementbagcuringthesamefornot lessthan2days andkeeping the surface of the base coat rough to receive the sand facedtreatment 6 to8mmthick incementmortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete.
25Providing neeru finish to plastered surfaces in all positions including scaffolding and curingetc. complete.
26Providing and laying matt finish ceramic tiles of having size 30 cm x 30 cm confirming to I.S.15622/2006 (group D II-A) and 7 to 8 mm thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/colour cement slurry cleaning curing etc. complete.
27Providing and laying ceramic tiles of having size 30 cm. x 30 cm. and confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete.
28Providing and applying two coats of exterior acraylic emulsion paint confirmingtocorrespondingI.S. ofapprovedmanufactureandofapprovedcolour totheplasteredsurfaces including cleaning ,preparing the plaster surface, applying primer coat,scaffolding if necessary , and watering the surface for two days etc complete.
29Providing and applying two coats of exterior weather shield paint of approvedmanufactureand of approved colour to the plastered surfaces including cleaning,preparing the plaster surface ,applying primer coat ,scaffolding if necessary, andwatering the surface for two days etc complete.
30Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet,outlet overflow pipe inclusive of all tanks capacity between 200 to 1000 liters
31Providing and fixing Orissa type white glazed earthenware 575 mm water closet pan including S trap with earthenware foot rests, cast iron soil and vent pipe upto outside face of the wall 1:2:4 brick bat lime concrete bedding without flushing tank and its accessories etc. complete.
32Providing and fixing 8cm C.I. Nahani Trap including C.I. grating bend and piece of C.I. pipe upto the outside face of the wall complete.
33Providing and fixing 100 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc.complete.
34Providing and fixing on walls/ ceiling/ floor 15 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.
35Providing and fixing 15 mm dia. screw down bib/ stop tap of brass including necessary socket union nut complete.
36Providing and constructing Brick Masonry Inspection Chamber 60cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half roundG.S.W. pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with R.C.C. Cover medium duty 140Kilogramwith frame etc complete.
37Providing and fixing white glazed earthenware Wash Hand Basin of 55cm. x 40 cm. size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connections including P.V.C. waste pipe and trap up to the outside face of the wall. Making good the damaged surface, testing etc. complete.
38Providing structural steel work in hollow section of various thickness and sizes insquare, rectanular and round shape from 25mm to 450mm section as per IS 4923 YST310 Grade produced from iron ore and blast furnace route etc. as per detailed designs anddrawing or as directed including cutting, fabricating, hoisting, erecting, fixing in position, making riveted/bolted/ welded connections and painting complete.
39Providingand fixing colour coated Zincalume (R) AZ150 (min 150 gms/sq.mt.total on each side ) profiled sheets for roofing.The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness (BMT) (0.5mmTCT), Hi -strength steel with min. 550 MPa yield strength, metallic hot dip coated with Aluminium -Zincalloy (55 % aluminium 43.4 % zinc 1.6 % silicon) with COLORBOND (R) steel quality superdurable polyester paint coat (with inorganic pigment).The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950 -1050 mm effective cover width and nominal 25 - 30 mm deep ribs with subtle square fluting in the five panat nominal 180 - 250 mm center - to - center.Theen drib shallbe designed for anti -capillary groove. and return leg.The feed material should have coil manufacturers product details marked a regular interval. Including fasteners with min.fastened with min. 25 um Zinc-Tin alloy coated,Hexhead,self-drillingscrewetc.complete. (weight of profile 4.52 Kilogram/ One Square Metre)
40PRIVIDING AND FIXING ACOUSTICAL FALSE CEILING WITH 0.7NRC : Sierra Mineral Fibre Acoustical Suspended Ceiling System with 13 mm thick Micro look Edge Tiles with 15mm face exposed grid.The tiles shall have smooth laminated salt peppervisual with Humidity Resistance (RH) of 95%,NRC0.7(AveragevalueofAbsorptionCo-efficientreadingstakenat250Hz,500Hz,1000Hzand2000Hz)asperASTMC423standard,CACof28dbasperASTME1414,LightReflectance≥85%asperASTME-1477,ThermalConductivityλ=0.037W/mK,ColourGlobalWhite,FirePerformanceofclassA2-s1,d0accordingtoEN13501-1with13mmMicrolookedgeand8mmdropinmodulesizeof600x600mm.Thescrimonthefaceofthetileshallbecleanable.ThetilesshallbeclassifiedasISO14644-1cleanroomclass5.ItshallbesuitableforGreenBuildingapplication,withRecycledcontentof60%.ThetileshallhavecertificationsfromGRIHAandGreenProtherebyconfirmingthatitisanenvironmentfriendlyproduct.SUSPENSION:Thetileshallbelaidon15mmwideT-sectionflangescolourglobalwhite(matchingtotilecolor)havingrollformeddoublestrokerotarystitchingonallTsectionsi.e.theMainRunner,1200mm&600mmCrossTeeswithawebheightof38mm(allsections).Thedeflectionloadingofthesystemshallbe12.5kg/m2(asperstandardinstallationlayoutmentionedbelow)andmainbeamtestedasperASTMC635(DeflectionlimitlessthanL/360)withadeflectionloadingof15kg/m.Theenddetailsofthecrossteeshallbemadeofprehardenedsteelandfixedtotheendsofthecrossteetoprovidedoublelockingbetween“crossteetocrosstee”and“crossteetomainbeam”.Allmainbeamtomainbeamandcrossteetocrossteeconnectionshallhaveapulloutstrengthofmorethan100kg.TheTSectionsshallbemadeofhotdippedgalvanizedsteelof90gsmasperIS277(2003)andpre-paintedsteelwithbakedpolyesterpaintwith0Tbendingcapability.Allbordercrosstee/mainbeamshallbelevelledusingperimeterfill.TheTile&Gridsystemusedtogethershallcarrya10yearwarrantyagainstmanufacturingdefectandmanufacturershallprovideawarrantycertificate.TheTile&Gridshallhavethemanufacturersnameembossed/printedonit.Thesupplyshallbebacked by a Manufacturing Test Certificate.
41Providing and fixing mild steel grill gate as per the detailed drawing including hinges, locking arrangements and painting in three coats of oil paint of approved colour and shade etc. complete.(weight 18 kg. to 20 kg. Per Sq.m.)Spec.No.: As directed by Engineer- in-charge.
42Providing and fixing 90 cm x 60 cm Marble plate engraving 10 cm. height letter, figures including painting the lefters/figures with approved colour and shade complete Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58604455
AUTHORITY Government Departments
TENDER VALUE 12.49 Lakhs
LAST DATE 27-11-2026
Authority
Authority Name Rural Development Department
Work Description Tender for Construction Of Medicine Room And Compound Wall At Veterinary Hospital Dolkhamb, Taluka Shahapur, District Thane.
Basic Detail
Tender No NIT No. 16-EE/WD/ZPTHANE/MKSS/2026-27
Bidding Type Tender
Location
City Thane
State Maharashtra
Key Dates
Publish Date 19 Nov 2026
Submission Date 27 Nov 2026
Open Date 27 Nov 2026
Finance
Tender Value 12.49 Lakhs
Tender Fee 590
EMD 12495
Exemption Not Available
Document List
570d81a5-8ce0-4a85-a612-c758e4a1b4a6.html
BOQ_2313328.xls
TD.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 19, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 27, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 5 days
Nov 27, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 5 days

Tender Documents

Download All (ZIP) ↓
html

570d81a5-8ce0-4a85-a612-c758e4a1b4a6.html

xls

BOQ_2313328.xls

pdf

TD.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender