Coal and Mines Boards / Undertakings / PSU Closing in 8 days TDR #58604313

Tender For Renovation And Upgradation Of Conference Hall At Gm Unit, Mahalaxmi Area

Issued by Boards / Undertakings / PSU · Sundargarh, Odisha
Tender Value
8.98 Lakhs
Estimated cost
Bid Submission
30 Nov 2026
8 days left
EMD
11300
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Sundargarh → Odisha
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Renovation And Upgradation Of Conference Hall At Gm Unit, Mahalaxmi Area

BOQ

Name of Work:- Renovation and Upgradation of Conference Hall at GM Unit, Mahalaxmi Area
Sl. No. Item Description
1Providing and fixing PVC panels, PVC louvers, with groove of respected make (weight nos less than 6.00 kg/per piece i.e. (16\\"X10')) on walls, complete in all respect as per the instruction of Engineer In Charge.
2Providing and fixing PVC panels, PVC louvers, without groove of respected make (weight nos less than 3.2 kg/per piece i.e. (12\\"X10')) on walls, complete in all respect as per the instruction of Engineer In Charge.
3Dismantling aluminium/Gypsum partitions,doors,windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material within 50meters leadas directed by Engineer- in-charge
4Providing 10mm thick plaster of Paris (gypsum anhydrous)ceiling up to a height of 5m above floor level,over first class kail woods trips25x6mm with 10mm gap in between and reinforced with rabbit wire mesh fixed to wooden frame (frame work to be paid separately):Flat surfaces
5Providing and fixing zebra vertical blinds on windows with all fittings complete in all respect as per the instruction of Engineer Inchagre
6Dismantling doors,windows and clere story windows (steelorwood)shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area beyond 3 sq. metres
7Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
8Providing & Fixing decorative high pressure laminated sheet of plain/wood graining loss/matt/suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. 1.5 mm thick
9Extra for providing lipping with 2nd class teak wood battens 25mm minimum depth on all edgesof flush door shutters (over all area of door shutter to be measured).
10Providing and fixing plywood 4mm thick, oneside decorative veneer conforming to IS:1328(type-1), for plain lining / cladding with necessary screws, including priming coat on unexposed surface with: Decorative veneer facings of approved manufacture
11Providing and fixing chromium plated brass 100mm mortice latch and lock with 6 levers and a pairof lever handles of approved quality with necessary screws etc. complete.
12Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion,necessary brass screws etc. to suit shutter thickness complete
13Providin gand fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS:3564, embossed on thebody,door weight up to 36kg to 80kg and door width from 701 mm to 1000mm),with double speed adjustment with necessary accessories and screws etc. complete.
14Providing and fixing chromium plated brass handles with necessary screws etc. complete:125mm
15Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two or more coats) over and including water thinnable priming coat with cement primer
16Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fixed withC.P. brass screws and PVC sleeves etc., wherever necessary complete:25 mm dia
17Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5sq. meters and under,including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete,including disposal of rubbish to the dumping ground,all complete as per direction of Engineer-in-Charge. With cement mortar 1:4 (1 cement : 4 fine sand)
18Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer- in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
19Wiring for light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit with modular switch, modular plate, suitable G.I. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as reqd (Gr.-B).
20Supplying & fixing of 6 module (200mm x 75mm) GI box alongwith modular base & cover plate for modular switches in recess etc. as reqd.
21Supplying & fixing of 12 module (200mm x 150mm) GI box alongwith modular base & cover plate for modular switches in recess etc. as reqd.
22Supplying & fixing of 3 pin 5/6 amps modular socket outlet on the existing modular plate & switch box including connection but excluding modular plate etc. as reqd.
23Supplying & fixing of 5/6 amps modular switch on the existing modular plate & switch box including connection but excluding modular plate etc. as reqd.
24Wiring for circuit / sub-main wiring alongwith earth wire with 2 x 2.5 sq. mm. + 1 x 2.5 sq. mm. earth wire of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as reqd.
25Wiring for circuit / sub-main wiring alongwith earth wire with 2 x 6.0 sq. mm. + 1 x 6.0 sq. mm. earth wire FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as reqd.
26Wiring for circuit / sub-main wiring alongwith earth wire with 4 x 10.0 sq. mm. + 2 x 10.0 sq. mm. earth wire FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as reqd.
27Supplying and fixing of 6-way (4+18), double door horizontal type three pole and neutral, sheet steel, MCB distribution board, 415V on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as reqd. (But without MCB / RCCB / Isolator).
28Supplying & fixing of 5 amps to 32 amps rating, 240/415 volts, 10kA \\"C\\" curve miniature circuit breaker suitable for inductive load (single pole) in existing MCB DB complete with connections, testing and commissioning etc. as reqd.
29Supplying & fixing of 63 amps rating, Three pole, 415 volts isolator in the existing MCB DB complete with connections, testing and commissioning etc. as reqd.
30Supplying & fixing of 63 amps rating, four pole (three phase and neutral), 415 volts RCCB having a sensitivity current upto 30mA in the existing MCB DB complete with connections, testing and commissioning etc. as reqd.
31Supplying & fixing 32 amps, 240 volts SPN industrial type, socket outlet, with 2-pole and earth, metal enclosed plug top alongwith 32 amps \\"C\\" curve, SPN MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet and complete with connections, testing & commissioning etc. as reqd.
32Supplying of 450mm, 240V AC Wall mounted fan with fixing accessories as reqd.
33Installation / fixing of wall fan including connection, testing, commissioning etc. as reqd.
34Supplying & fixing of IP-20, 9W, 220-240V AC, 115mm dia, 77Lumens/Watt LED Ceiling light including all accessories as reqd.
35Supply, fabrication & installation of \\"MCL Mahalaxmi Area\\" Signage having Acryllic raised letters as per approved design, mounted on ACP having ACP back plate of 8 ft x 4.5 ft support. Latex printed vinyl to be used wherever necessary. Technical specification:-(1) Body material: Front 3 mm Acrylic imported sheet. The letters should be raised with Acryllic by at least 75 mm so that, it is visible when LEDs are off in day time. (2) Font and Dimension of Letters: As per the design given by the Engineer I/C. (3) Installation: Indoor type / Wall mounted. (4) Lumen: >100 lm/w. (5) Protection class: IP 65. (6) LED Type: SMD LED 3 in 1 waterproof ISI certified, 1.5 Watt. (7) LED Brand: OSRAM / SAMSUNG / CREE / Philips lumiled. (8) Rated Life of LEDs: More than 50,000 Hrs. (9) Surge Protection: >4KV.
36Supplying, fixing, testing and commissioning of high-output LED cove light strip of 20 W per running metre, mounted on a high-grade extruded aluminium heat-dissipation profile of suitable size, high-efficiency LED strip, compatible LED driver/controller, mounting clips, end caps, connectors, internal wiring and all necessary accessories, providing uniform and glare-free indirect illumination, as approved by the Engineer-in-Charge. Technical Specifications:-(1) Power Consumption: 20 W per running metre. (2) LED Type: High-density SMD LED strip or COB LED strip. (3) Input Supply: 220-240 V AC, 50 Hz, through compatible driver. (4) Operating Voltage: 24 V DC, or as approved. (5) Colour Temperature: 3000K / 4000K. (6) Aluminium Profile: High-grade extruded aluminium alloy with adequate heat-dissipation capacity.
37Total impact of GST plus Labour Cess [@ 1 % (BOCW Cess to be deducted from the RA bill as per the value of the work progress)] for the purpose of CTC Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58604313
AUTHORITY Boards / Undertakings / PSU
TENDER VALUE 8.98 Lakhs
LAST DATE 30-11-2026
Authority
Authority Name Mahanadi Coalfields Limited
Work Description Tender for Renovation And Upgradation Of Conference Hall At Gm Unit, Mahalaxmi Area
Basic Detail
Tender No MCL/GM/MLA/C/e-Tender/26-27/14 dt.13/11/2026
Bidding Type Tender
Location
City Sundargarh
State Odisha
Key Dates
Publish Date 19 Nov 2026
Submission Date 30 Nov 2026
Open Date 01 Dec 2026
Finance
Tender Value 8.98 Lakhs
Tender Fee Ref. Documents
EMD 11300
Exemption Not Available
Document List
5b4a0a6e-dcea-4254-9491-8e0728b7990c.html
BOQ_381843.xls
Tendernotice_1.pdf
Tendernotice_2.pdf
Tendernotice_3.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 19, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 30, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 8 days
Dec 01, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 9 days

Tender Documents

Download All (ZIP) ↓
html

5b4a0a6e-dcea-4254-9491-8e0728b7990c.html

xls

BOQ_381843.xls

pdf

Tendernotice_1.pdf

pdf

Tendernotice_2.pdf

pdf

Tendernotice_3.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender