Tender For Day To Day Maintenance Of Plumbing Work At Gm Office, L&R Office, Regional Store And Other Welfare Buildings Includings Mt Hostel Under Bharatpur Area For A Period Of Two Years.Nit No.:Gm(Ba)/So(Civil)/E-Tender/2026-27/618 Date:18.11.2026
Tender Overview
Project Description
Tender for Day To Day Maintenance Of Plumbing Work At Gm Office, L&R Office, Regional Store And Other Welfare Buildings Includings Mt Hostel Under Bharatpur Area For A Period Of Two Years.Nit No.:Gm(Ba)/So(Civil)/E-Tender/2026-27/618 Date:18.11.2026
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 20-Nov-2026 | Change in Timing of bid submission End Date | Other | 30-Nov-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | PART A (WITH ITC AVAILABILITY) |
| 2 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: Stainless Steel AISI-304(18/8) Orissa pattern W.C. pan of size 585x480 mm with flush pipe and integrated type foot rests |
| 3 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid |
| 4 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap |
| 5 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. |
| 6 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :Kitchen sink without drain boar-610x510 mm bowl depth 200 mm |
| 7 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :One urinal basin with 5 litre white P.V.C. automatic flushing cistern |
| 8 | Providing and fixing one piece construction white vitreous china squatting plate with an integral longitudinal flushing pipe, white P.V.C. automatic flushing cistern, with fittings, standard size G.I. / PVC flush pipe for back and front flush with standard spreader pipes with fittings, G.I clamps and C.P. brass coupling complete, including painting of fittings and cutting and making good the walls and floors etc. wherever required :Single squatting plate with 5 litre P.V.C. automatic flushing cistern |
| 9 | Providing and fixing P.V.C. low level flushing cistern with manuallycontrolled device (handle lever) conforming to IS : 7231, with all fittingsand fixtures complete.10 litre capacity - White |
| 10 | Providing and fixing P.V.C. waste pipe for sink or wash basin includingP.V.C. waste fittings complete.Semi rigid pipe 32 mm dia |
| 11 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.Semi rigid pipe-40 mm dia |
| 12 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Rectangular shape 453x357 mm |
| 13 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 15 mm nominal dia Pipes |
| 14 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.20 mm nominal dia Pipes |
| 15 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work-25 mm nominal dia Pipes |
| 16 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work-40 mm nominal dia Pipes |
| 17 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work-50 mm nominal dia Pipes |
| 18 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :15 mm nominal bore |
| 19 | Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.15 mm nominal bore |
| 20 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.15 mm nominal bore |
| 21 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15 mm nominal bore |
| 22 | Providing and fixing C.P. Brass extension nipple (size 15 mm x 50 mm) of approved make and quality as per direction of Engineer-in-charge. |
| 23 | Providing and fixing 15 mm CP brass pillar tap of approved quality by (PLAZA brand or equivalent) as per instruction of Engineer-in-charge. |
| 24 | Providing and fixing CP Health Faucet with CP Tube & Hook set and Bib cock two in one quater turn of Jaquar make or approved equivalent quality complete set i/c cost of labour and materials complete as per instruction of EIC. |
| 25 | Providing CPVC ball valve of approved make as per direction of EIC 20 mm dia |
| 26 | Providing CPVC ball valve of approved make as per direction of EIC 25 mm dia |
| 27 | Providing CPVC ball valve of approved make as per direction of EIC 40 mm dia |
| 28 | Providing CPVC ball valve of approved make as per direction of EIC 50 mm dia |
| 29 | Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour.15 mm nominal bore with 45 cm length |
| 30 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 31 | Day to day maintenance of plumbing work etc. with all labour cost but excluding cost of materials as per instruction of Engineer Incharge. |
| 32 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.75 mm diameter |
| 33 | Cleaning of over head water tank (HDPE / Masonary) by applying bleaching powder, washing the tank neatly as per instruction of EIC (Upto 2000 Litre capacity) |
| 34 | Removal of chokage / blockage of inspection chambers by removing silt, sludge and other foreign materials and disposal of the same to the nearest dustbins etc. Complete as per the direction of engineer-In-Charge. |
| 35 | Providing CPVC SOCKET - 25mm dia of approved quality as per instruction of Engineer-in-charge |
| 36 | Providing CPVC UNION - 25mm dia of approved quality as per instruction of Engineer-in-charge |
| 37 | Providing CPVC PLAIN ELBOW- 25mm dia of approved quality as per instruction of Engineer-in-charge |
| 38 | Providing CPVC TEE - 25mm dia of approved quality as per instruction of Engineer-in-charge |
| 39 | Providing CPVC SOCKET - 40mm dia of approved quality as per instruction of Engineer-in-charge |
| 40 | Providing CPVC UNION - 40mm dia of approved quality as per instruction of Engineer-in-charge |
| 41 | Providing CPVC TEE - 40mm dia of approved quality as per instruction of Engineer-in-charge |
| 42 | Providing CPVC Elbow 90° of approved make as per direction of EIC40 mm dia |
| 43 | Providing CPVC SOCKET - 50mm dia of approved quality as per instruction of Engineer-in-charge |
| 44 | Providing CPVC UNION - 50mm dia of approved quality as per instruction of Engineer-in-charge |
| 45 | Providing CPVC PLAIN ELBOW- 50mm dia of approved quality as per instruction of Engineer-in-charge |
| 46 | Providing CPVC reducing Elbow 90° of approved make as per direction of EIC 25X20 |
| 47 | Providing CPVC reducing Tee of approved make as per direction of EIC 25X20 |
| 48 | Providing CPVC Male threaded tee brass of approved make as per direction of EIC 20 mm dia |
| 49 | Providing CPVC Male threaded tee brass of approved make as per direction of EIC 25 mm dia |
| 50 | Providing CPVC female threaded tee brass of approved make as per direction of EIC 20 mm dia |
| 51 | Providing CPVC female threaded tee brass of approved make as per direction of EIC 25 mm dia |
| 52 | Providing CPVC female threaded brass elbow of approved make as per direction of EIC 20 mm dia |
| 53 | Providing CPVC female threaded brass elbow of approved make as per direction of EIC 25 mm dia |
| 54 | Providing and fixing Wall Mixer 3 in 1 Quarter turn of approved brand Jaquar or equivalent make as per direction of EIC |
| 55 | Providing polyethylene water storage tank cover as per instruction of Engineer-in-charge. |
| 56 | Providing CPVC tank connectors of approved make as per direction of EIC 50 mm dia |
| 57 | Providing CPVC Tank nipple 25MM dia of approved quality as per instruction of Engineer-in-charge |
| 58 | Providing M-seal adhesive or equivalent (in packets of 100 gm) as per instruction of Engineer-in-Charge. |
| 59 | Providing teflon tape |
| 60 | Providing flush bend for flushing cistern of length 1.00 Mtr of approved make as per direction of EIC. |
| 61 | Providing PVC low level cistern handle as per instruction of Engineer-in-Charge. |
| 62 | Providing PVC low level cistern washer kit as per instruction of Engineer-in-Charge. |
| 63 | Providing PVC low level cistern ballcock 15mm dia as per instruction of Engineer-in-Charge. |
| 64 | Providing brass spindle suitable for CP pillar cock, cp bib cock of approved make as per direction of EIC |
| 65 | Providing CP waste for kitchen sink of 9 inch length of approved make as per direction of EIC |
| 66 | providing coupling 40 mm for kitchen sink of approved make as per direction of EIC |
| 67 | Providing 32 mm cp waste for wash basin of 4inch long of approved make as per direction of EIC |
| 68 | Providing and fixing PTMT bib cock of approved quality and colour.15 mm nominal bore, 86 mm long, weighing not less than 88 gms |
| 69 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15 mm nominal bore |
| 70 | Providing and fixing Health Faucet with CP Tube & Hook set of approved quality as per instruction of Engineer-in-charge. |
| 71 | Providing and fixing CP brass Bib cock two in one quater turn of approved quality as per instruction of Engineer-in-charge. |
| 72 | Providing and fixing C.P. shower rose with arm (Plaza brand or equivalent) of approved quality complete with 15 mm or 20 mm inlet 100 mm diameter as per instruction of Engineer-in-Charge. |
| 73 | Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. |
| 74 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. |
| 75 | Providing C.P. soap dish (Balaji brand or equivalent) as per instruction of Engineer-in-charge. |
| 76 | Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms. |
| 77 | Providing and fixing C.P. towel rod size 600x20mm with C.P. brass screws to be approved by Engineer-in-Charge (PLAZA brand or equivalent) as per instruction of Engineer-in-charge. |
| 78 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms |
| 79 | Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36 mm height of approved quality and colour, weighing not less than 300 gms. |
| 80 | Providing pvc 100 mm X100 mm nahani trap of approved make as per direction of EIC. |
| 81 | Providing and fixing on wall face PVC SWR pipes conforming to IS : 13592 , including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.(In case SWR pipes is laid on ground, cost of trenching & filling, if required is to be paid separately)75 mm diameter (Type B) |
| 82 | Providing and fixing on wall face PVC SWR pipes conforming to IS : 13592 , including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. (In case SWR pipes is laid on ground, cost of trenching & filling, if required is to be paid separately)110 mm diameter (Type B) |
| 83 | Providing and fixing SWR moulded fittings/ accessories for SWR pipes conforming to IS : 13592, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.SWR Single tee 75 mm |
| 84 | Providing and fixing SWR moulded fittings/ accessories for SWR pipes conforming to IS : 13592, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.SWR Single tee 110 mm |
| 85 | Providing and fixing SWR moulded fittings/ accessories for SWR pipes conforming to IS : 13592, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.SWR Single tee with door 75 mm |
| 86 | Providing and fixing SWR moulded fittings/ accessories for SWR pipes conforming to IS : 13592, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.SWR Single tee with door 110 mm |
| 87 | Providing and fixing SWR moulded fittings/ accessories for SWR pipes conforming to IS : 13592, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion:SWR 87.5° bend 75 mm |
| 88 | Providing and fixing SWR moulded fittings/ accessories for SWR pipes conforming to IS : 13592, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion:SWR 87.5° bend 110 mm |
| 89 | Providing and fixing SWR moulded fittings/ accessories for SWR pipes conforming to IS : 13592, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion:SWR 87.5° bend 75 mm with door |
| 90 | Providing and fixing SWR moulded fittings/ accessories for SWR pipes conforming to IS : 13592, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion:SWR 87.5° bend 110 mm with door |
| 91 | Providing and fixing SWR moulded fittings/ accessories for SWR pipes conforming to IS : 13592, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.SWR Coupler 75 mm |
| 92 | Providing and fixing SWR moulded fittings/ accessories for SWR pipes conforming to IS : 13592, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.SWR coupler 110 mm |
| 93 | Providing and fixing SWR moulded fittings/ accessories for SWR pipes conforming to IS : 13592, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.SWR Shoe bend 45 degree 75 mm |
| 94 | Providing and fixing SWR moulded fittings/ accessories for SWR pipes conforming to IS : 13592, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.SWR Shoe bend 45 degree 110 mm |
| 95 | Providing and fixing SWR moulded fittings/ accessories for SWR pipes conforming to IS : 13592, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.SWR Single Y 75 mm |
| 96 | Providing and fixing SWR moulded fittings/ accessories for SWR pipes conforming to IS : 13592, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.SWR Single Y 110 mm |
| 97 | Providing and fixing SWR moulded fittings/ accessories for SWR pipes conforming to IS : 13592, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.SWR Reducer 110X75 mm |
| 98 | Providing and fixing SWR moulded fittings/ accessories for SWR pipes conforming to IS : 13592, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.SWR reducer TEE 110X75 mm |
| 99 | Providing and fixing SWR moulded fittings/ accessories for SWR pipes conforming to IS : 13592, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.SWR P Trap 110 X110 mm |
| 100 | Providing and fixing SWR Vent cowl :75 mm |
| 101 | Providing and fixing SWR Vent cowl :110 mm |
| 102 | Cleaning of septic tank with removal of sludge night soil etc complete and putting the waste materials by digging pit within a distance of 1km and coverring the same as per the instruction of Engg-in-charge |
| 103 | Boring/drilling borewell of required dia for casing/strainer pipe by suitable methods as prescribed in IS:2800(Part-I) including collecting samples from different strata, preparing and submitting strata chart /bore log, inlduing hire and running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of EIC, up to 90 meter depth below ground level. All types of soil - 200mm Dia |
| 104 | Boring/drilling borewell of required dia for casing/strainer pipe by suitable methods as prescribed in IS:2800(Part-I) including collecting samples from different strata, preparing and submitting strata chart /bore log, inlduing hire and running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of EIC, up to 90 meter depth below ground level. Rocky Strata including Boulders - 200mm Dia |
| 105 | Boring/drilling borewell of required dia for casing/strainer pipe by suitable methods as prescribed in IS:2800(Part-I) including collecting samples from different strata, preparing and submitting strata chart /bore log, inlduing hire and running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of EIC, up to 90 meter depth below ground level. Rocky Strata including Boulders - 150mm Dia |
| 106 | Boring/drilling borewell of required dia for casing/strainer pipe by suitable methods as prescribed in IS:2800(Part-I) including collecting samples from different strata, preparing and submitting strata chart /bore log, inlduing hire and running charges of all equipments, tools , plants & machineries required for the job, all complete as per direction of EIC, beyond 90 meter & upto 150 meter depth below ground level.Rocky Strata including Boulders - 150mm Dia |
| 107 | Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by \\"V\\" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge. |
| 108 | Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge.200 mm nominal size dia |
| 109 | Providing and fixing 2.5sq mm 3core Finolex or equivalent Flat Cable of approved quality as per instruction of Engineer-in-charge. |
| 110 | Providing and fixing 40 mm OD 8 kg Black HDPE Pipe of approved quality as per instruction of Engineer-in-charge. |
| 111 | Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of:200 mm dia |
| 112 | Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete.200 mm clamp |
| 113 | Providing of 40 mm Nozle & cross bolt at site |
| 114 | Providing of Nylone rope 12mm dia |
| 115 | PART B (WITHOUT ITC AVAILABILITY) |
| 116 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: Stainless Steel AISI-304(18/8) Orissa pattern W.C. pan of size 585x480 mm with flush pipe and integrated type foot rests |
| 117 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid |
| 118 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap |
| 119 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. |
| 120 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :Kitchen sink without drain boar-610x510 mm bowl depth 200 mm |
| 121 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :One urinal basin with 5 litre white P.V.C. automatic flushing cistern |
| 122 | Providing and fixing one piece construction white vitreous china squatting plate with an integral longitudinal flushing pipe, white P.V.C. automatic flushing cistern, with fittings, standard size G.I. / PVC flush pipe for back and front flush with standard spreader pipes with fittings, G.I clamps and C.P. brass coupling complete, including painting of fittings and cutting and making good the walls and floors etc. wherever required :Single squatting plate with 5 litre P.V.C. automatic flushing cistern |
| 123 | Providing and fixing P.V.C. low level flushing cistern with manuallycontrolled device (handle lever) conforming to IS : 7231, with all fittingsand fixtures complete.10 litre capacity - White |
| 124 | Providing and fixing P.V.C. waste pipe for sink or wash basin includingP.V.C. waste fittings complete.Semi rigid pipe 32 mm dia |
| 125 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.Semi rigid pipe-40 mm dia |
| 126 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Circular shape 450 mm dia |
| 127 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 15 mm nominal dia Pipes |
| 128 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.20 mm nominal dia Pipes |
| 129 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work-25 mm nominal dia Pipes |
| 130 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work-40 mm nominal dia Pipes |
| 131 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work-50 mm nominal dia Pipes |
| 132 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :15 mm nominal bore |
| 133 | Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.15 mm nominal bore |
| 134 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.15 mm nominal bore |
| 135 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15 mm nominal bore |
| 136 | Providing and fixing C.P. Brass extension nipple (size 15 mm x 50 mm) of approved make and quality as per direction of Engineer-in-charge. |
| 137 | Providing and fixing 15 mm CP brass pillar tap of approved quality by (PLAZA brand or equivalent) as per instruction of Engineer-in-charge. |
| 138 | Providing and fixing CP Health Faucet with CP Tube & Hook set and Bib cock two in one quater turn of Jaquar make or approved equivalent quality complete set i/c cost of labour and materials complete as per instruction of EIC. |
| 139 | Providing CPVC ball valve of approved make as per direction of EIC 20 mm dia |
| 140 | Providing CPVC ball valve of approved make as per direction of EIC 25 mm dia |
| 141 | Providing CPVC ball valve of approved make as per direction of EIC 40 mm dia |
| 142 | Providing CPVC ball valve of approved make as per direction of EIC 50 mm dia |
| 143 | Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour.15 mm nominal bore with 45 cm length |
| 144 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 145 | Day to day maintenance of plumbing work etc. with all labour cost but excluding cost of materials as per instruction of Engineer Incharge. |
| 146 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.75 mm diameter |
| 147 | Cleaning of over head water tank (HDPE / Masonary) by applying bleaching powder, washing the tank neatly as per instruction of EIC (Upto 2000 Litre capacity) |
| 148 | Removal of chokage / blockage of inspection chambers by removing silt, sludge and other foreign materials and disposal of the same to the nearest dustbins etc. Complete as per the direction of engineer-In-Charge. |
| 149 | Providing CPVC SOCKET - 25mm dia of approved quality as per instruction of Engineer-in-charge |
| 150 | Providing CPVC UNION - 25mm dia of approved quality as per instruction of Engineer-in-charge |
| 151 | Providing CPVC PLAIN ELBOW- 25mm dia of approved quality as per instruction of Engineer-in-charge |
| 152 | Providing CPVC TEE - 25mm dia of approved quality as per instruction of Engineer-in-charge |
| 153 | Providing CPVC SOCKET - 40mm dia of approved quality as per instruction of Engineer-in-charge |
| 154 | Providing CPVC UNION - 40mm dia of approved quality as per instruction of Engineer-in-charge |
| 155 | Providing CPVC TEE - 40mm dia of approved quality as per instruction of Engineer-in-charge |
| 156 | Providing CPVC Elbow 90° of approved make as per direction of EIC40 mm dia |
| 157 | Providing CPVC SOCKET - 50mm dia of approved quality as per instruction of Engineer-in-charge |
| 158 | Providing CPVC UNION - 50mm dia of approved quality as per instruction of Engineer-in-charge |
| 159 | Providing CPVC PLAIN ELBOW- 50mm dia of approved quality as per instruction of Engineer-in-charge |
| 160 | Providing CPVC reducing Elbow 90° of approved make as per direction of EIC 25X20 |
| 161 | Providing CPVC reducing Tee of approved make as per direction of EIC 25X20 |
| 162 | Providing CPVC Male threaded tee brass of approved make as per direction of EIC 20 mm dia |
| 163 | Providing CPVC Male threaded tee brass of approved make as per direction of EIC 25 mm dia |
| 164 | Providing CPVC female threaded tee brass of approved make as per direction of EIC 20 mm dia |
| 165 | Providing CPVC female threaded tee brass of approved make as per direction of EIC 25 mm dia |
| 166 | Providing CPVC female threaded brass elbow of approved make as per direction of EIC 20 mm dia |
| 167 | Providing CPVC female threaded brass elbow of approved make as per direction of EIC 25 mm dia |
| 168 | Providing and fixing Wall Mixer 3 in 1 Quarter turn of approved brand Jaquar or equivalent make as per direction of EIC |
| 169 | Providing polyethylene water storage tank cover as per instruction of Engineer-in-charge. |
| 170 | Providing CPVC tank connectors of approved make as per direction of EIC 50 mm dia |
| 171 | Providing CPVC Tank nipple 25MM dia of approved quality as per instruction of Engineer-in-charge |
| 172 | Providing M-seal adhesive or equivalent (in packets of 100 gm) as per instruction of Engineer-in-Charge. |
| 173 | Providing teflon tape |
| 174 | Providing flush bend for flushing cistern of length 1.00 Mtr of approved make as per direction of EIC. |
| 175 | Providing PVC low level cistern handle as per instruction of Engineer-in-Charge. |
| 176 | Providing PVC low level cistern washer kit as per instruction of Engineer-in-Charge. |
| 177 | Providing PVC low level cistern ballcock 15mm dia as per instruction of Engineer-in-Charge. |
| 178 | Providing brass spindle suitable for CP pillar cock, cp bib cock of approved make as per direction of EIC |
| 179 | Providing CP waste for kitchen sink of 9 inch length of approved make as per direction of EIC |
| 180 | providing coupling 40 mm for kitchen sink of approved make as per direction of EIC |
| 181 | Providing 32 mm cp waste for wash basin of 4inch long of approved make as per direction of EIC |
| 182 | Providing and fixing PTMT bib cock of approved quality and colour.15 mm nominal bore, 86 mm long, weighing not less than 88 gms |
| 183 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15 mm nominal bore |
| 184 | Providing and fixing Health Faucet with CP Tube & Hook set of approved quality as per instruction of Engineer-in-charge. |
| 185 | Providing and fixing CP brass Bib cock two in one quater turn of approved quality as per instruction of Engineer-in-charge. |
| 186 | Providing and fixing C.P. shower rose with arm (Plaza brand or equivalent) of approved quality complete with 15 mm or 20 mm inlet 100 mm diameter as per instruction of Engineer-in-Charge. |
| 187 | Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. |
| 188 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. |
| 189 | Providing C.P. soap dish (Balaji brand or equivalent) as per instruction of Engineer-in-charge. |
| 190 | Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms. |
| 191 | Providing and fixing C.P. towel rod size 600x20mm with C.P. brass screws to be approved by Engineer-in-Charge (PLAZA brand or equivalent) as per instruction of Engineer-in-charge. |
| 192 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms |
| 193 | Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36 mm height of approved quality and colour, weighing not less than 300 gms. |
| 194 | Providing pvc 100 mm X100 mm nahani trap of approved make as per direction of EIC. |
| 195 | Providing and fixing on wall face PVC SWR pipes conforming to IS : 13592 , including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.(In case SWR pipes is laid on ground, cost of trenching & filling, if required is to be paid separately)75 mm diameter (Type B) |
| 196 | Providing and fixing on wall face PVC SWR pipes conforming to IS : 13592 , including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. (In case SWR pipes is laid on ground, cost of trenching & filling, if required is to be paid separately)110 mm diameter (Type B) |
| 197 | Providing and fixing SWR moulded fittings/ accessories for SWR pipes conforming to IS : 13592, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.SWR Single tee 75 mm |
| 198 | Providing and fixing SWR moulded fittings/ accessories for SWR pipes conforming to IS : 13592, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.SWR Single tee 110 mm |
| 199 | Providing and fixing SWR moulded fittings/ accessories for SWR pipes conforming to IS : 13592, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.SWR Single tee with door 75 mm |
| 200 | Providing and fixing SWR moulded fittings/ accessories for SWR pipes conforming to IS : 13592, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.SWR Single tee with door 110 mm |
| 201 | Providing and fixing SWR moulded fittings/ accessories for SWR pipes conforming to IS : 13592, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion:SWR 87.5° bend 75 mm |
| 202 | Providing and fixing SWR moulded fittings/ accessories for SWR pipes conforming to IS : 13592, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion:SWR 87.5° bend 110 mm |
| 203 | Providing and fixing SWR moulded fittings/ accessories for SWR pipes conforming to IS : 13592, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion:SWR 87.5° bend 75 mm with door |
| 204 | Providing and fixing SWR moulded fittings/ accessories for SWR pipes conforming to IS : 13592, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion:SWR 87.5° bend 110 mm with door |
| 205 | Providing and fixing SWR moulded fittings/ accessories for SWR pipes conforming to IS : 13592, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.SWR Coupler 75 mm |
| 206 | Providing and fixing SWR moulded fittings/ accessories for SWR pipes conforming to IS : 13592, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.SWR coupler 110 mm |
| 207 | Providing and fixing SWR moulded fittings/ accessories for SWR pipes conforming to IS : 13592, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.SWR Shoe bend 45 degree 75 mm |
| 208 | Providing and fixing SWR moulded fittings/ accessories for SWR pipes conforming to IS : 13592, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.SWR Shoe bend 45 degree 110 mm |
| 209 | Providing and fixing SWR moulded fittings/ accessories for SWR pipes conforming to IS : 13592, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.SWR Single Y 75 mm |
| 210 | Providing and fixing SWR moulded fittings/ accessories for SWR pipes conforming to IS : 13592, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.SWR Single Y 110 mm |
| 211 | Providing and fixing SWR moulded fittings/ accessories for SWR pipes conforming to IS : 13592, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.SWR Reducer 110X75 mm |
| 212 | Providing and fixing SWR moulded fittings/ accessories for SWR pipes conforming to IS : 13592, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.SWR reducer TEE 110X75 mm |
| 213 | Providing and fixing SWR moulded fittings/ accessories for SWR pipes conforming to IS : 13592, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.SWR P Trap 110 X110 mm |
| 214 | Providing and fixing SWR Vent cowl :75 mm |
| 215 | Providing and fixing SWR Vent cowl :110 mm |
| 216 | Cleaning of septic tank with removal of sludge night soil etc complete and putting the waste materials by digging pit within a distance of 1km and coverring the same as per the instruction of Engg-in-charge |
| 217 | Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by \\"V\\" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge. |
| 218 | Providing and fixing 2.5sq mm 3core Finolex or equivalent Flat Cable of approved quality as per instruction of Engineer-in-charge. |
| 219 | Providing and fixing 40 mm OD 8 kg Black HDPE Pipe of approved quality as per instruction of Engineer-in-charge. |
| 220 | Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of:200 mm dia |
| 221 | Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete.200 mm clamp |
| 222 | Providing of 40 mm Nozle & cross bolt at site |
| 223 | Providing of Nylone rope 12mm dia |
| 224 | Total impact of GST plus Labour Cess [@ 1 % (BOCW Cess to be deducted from the RA bill as per the value of the work progress)] for the purpose of CTC Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedCorrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 7 daysBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender