Tender For Short Term Maintenance Contract (Stmc) Estimates For Different Roads Under Package-Stmc/Mbj/Pkg-02/ 2026-27 In The District Of Mayurbhanj, Odisha For The Financial Year 2026-27
Tender Value
63.78 Lakhs
Estimated cost
Bid Submission
27 Nov 2026
5 days left
EMD
63800
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mayurbhanj → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Short Term Maintenance Contract (Stmc) Estimates For Different Roads Under Package-Stmc/Mbj/Pkg-02/ 2026-27 In The District Of Mayurbhanj, Odisha For The Financial Year 2026-27
BOQ
| Sl. No. | Item Description |
| 1 | CIVIL WORK - Package-2 (R1) Name of Road: STMC for K.C. Circle to Damdorghat via Baruni road 0.000 Km to 1.537Km.Restoration of rain cuts with soil, moorum, gravel or a mixture of these, clearing the loose soil, benching for 300 mm width, laying fresh material in layers not exceeding 250 mm and compacting with plate compactor or power rammers to restore the original alignment, levels and slopes as per MORT&H specification cluse no 3002 and as per direction of the Engineer-in-charge |
| 2 | Removal of rank vegetation/weeds and undesirable vegetation from shoulders,embankment slopes up to ROW(bothsides) complete in all respects including breaking of clods,rough dressing and disposal of waste material and vegetation at a place outside ROW as per direction of Engineer-In-Charge and as per maintenance standards Clause no 3.1.(Frequency of cleaning will be one time in a quarter)a) Shoulders including side slopes of embankment upto toe line both sides of the carriageway.(Frequency of cleaning will be four times in a year, however limited to only areas prone to growth of rank/undesirable vegetation and weeds) |
| 3 | Construction of sub-grade and earthen shoulders with approved material obtained from Borrow pits with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of Table 300-2. |
| 4 | Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom. |
| 5 | Providing & laying Bituminous Concrete of grading -2 using crushed stone Gr.-2 materials & CRMB-55 grade of bitumen preparing preemixed materials with bituminous binder with hot mix plant, transported to site, laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per clauses 501 and 507 of MoRT&H Specifications for Road & Bridge works (5th Revision) including cost, conveyance, royality & other taxes of materials, cost of labour, machinery, T&P etc complete. |
| 6 | Filling Pot-holes and Patch Repairs with Bituminous concrete, 40mm.Removal of all failed material, trimming of completed excavation to provide firm vertical faces, cleaning of surface, painting of tack coat on the sides and base of excavation as per clause 503, back filling the pot holes with hot bituminous material as per clause 504, compacting, trimming and finishing the surface to form a smooth continuous surface, all as per clause 3004.2 |
| 7 | CIVIL WORK - Package-2 (R2) Name of Road: STMC for Station Bazar Railway Level Crossing to Sunamuhin Chhak from 0.000 Km to 1.444 KmProviding and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes. |
| 8 | Filling Pot-holes and Patch Repairs with Bituminous concrete, 40mm.Removal of all failed material, trimming of completed excavation to provide firm vertical faces, cleaning of surface, painting of tack coat on the sides and base of excavation as per clause 503, back filling the pot holes with hot bituminous material as per clause 504, compacting, trimming and finishing the surface to form a smooth continuous surface, all as per clause 3004.2 |
| 9 | CIVIL WORK - Package-2 (R3) Name of Road: STMC for Bhanjpur Chhak to Belgadia Chhak from 0/00 to1/327 kmProviding and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes. |
| 10 | Filling Pot-holes and Patch Repairs with Bituminous concrete, 40mm.Removal of all failed material, trimming of completed excavation to provide firm vertical faces, cleaning of surface, painting of tack coat on the sides and base of excavation as per clause 503, back filling the pot holes with hot bituminous material as per clause 504, compacting, trimming and finishing the surface to form a smooth continuous surface, all as per clause 3004.2 |
| 11 | CIVIL WORK - Package-2 (R4) Name of Road: STMC for Sports Hostel Chhak (Near Indoor Stadium)to Raxi Chhak via-Kacheri Vegitable Market from 0.000 Km to 1.368 KmProviding and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes. |
| 12 | Filling Pot-holes and Patch Repairs with Bituminous concrete, 40mm.Removal of all failed material, trimming of completed excavation to provide firm vertical faces, cleaning of surface, painting of tack coat on the sides and base of excavation as per clause 503, back filling the pot holes with hot bituminous material as per clause 504, compacting, trimming and finishing the surface to form a smooth continuous surface, all as per clause 3004.2 |
| 13 | CIVIL WORK - Package-2 (R5) Name of Road: STMC for Budhikhamari to Badjod Tungadhua Road NH-5 From 0/000Km to 12/00Km.Restoration of rain cuts with soil, moorum, gravel or a mixture of these, clearing the loose soil, benching for 300 mm width, laying fresh material in layers not exceeding 250 mm and compacting with plate compactor or power rammers to restore the original alignment, levels and slopes as per MORT&H specification cluse no 3002 and as per direction of the Engineer-in-charge |
| 14 | Removal of rank vegetation/weeds and undesirable vegetation from shoulders,embankment slopes up to ROW(bothsides) complete in all respects including breaking of clods,rough dressing and disposal of waste material and vegetation at a place outside ROW as per direction of Engineer-In-Charge and as per maintenance standards Clause no 3.1.(Frequency of cleaning will be one time in a quarter)a) Shoulders including side slopes of embankment upto toe line both sides of the carriageway.(Frequency of cleaning will be four times in a year, however limited to only areas prone to growth of rank/undesirable vegetation and weeds) |
| 15 | Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of class-B Type IV retro reflective sheeting fixed cover 2 mm thick aluminium sheeting vide clause 801.3, 3mm/4mm thick aluminium composite material sheet depending on the size of the sign fixed over back support frame of min 25 x 25 x 3 mm Angle mounted on a mild steel circular pipe 65 NB, 3.2 mm thickness firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. The sign shall be maintained as per section 12 of IRC 67.90 cm equilateral triangle |
| 16 | 90 cm circular |
| 17 | Filling Pot-holes and Patch Repairs with Bituminous concrete, 40mm.Removal of all failed material, trimming of completed excavation to provide firm vertical faces, cleaning of surface, painting of tack coat on the sides and base of excavation as per clause 503, back filling the pot holes with hot bituminous material as per clause 504, compacting, trimming and finishing the surface to form a smooth continuous surface, all as per clause 3004.2 |
| 18 | CIVIL WORK - Package-2 (R6) Name of Road: STMC for Sri Ram Chandra Pathagar (Jubilee Library) to Rangamatia Chhab on Baripada-Chitrada Road Via Tulasichoura Gosala Chhab NH-18 & University from 0.000 Km to 6.549 KmProviding and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of class-B Type IV retro reflective sheeting fixed cover 2 mm thick aluminium sheeting vide clause 801.3, 3mm/4mm thick aluminium composite material sheet depending on the size of the sign fixed over back support frame of min 25 x 25 x 3 mm Angle mounted on a mild steel circular pipe 65 NB, 3.2 mm thickness firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. The sign shall be maintained as per section 12 of IRC 67.90 cm equilateral triangle |
| 19 | 90 cm circular |
| 20 | Filling Pot-holes and Patch Repairs with Bituminous concrete, 40mm.Removal of all failed material, trimming of completed excavation to provide firm vertical faces, cleaning of surface, painting of tack coat on the sides and base of excavation as per clause 503, back filling the pot holes with hot bituminous material as per clause 504, compacting, trimming and finishing the surface to form a smooth continuous surface, all as per clause 3004.2 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 19, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysNov 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender