Tender For Augmentation And Replacement Of Water Supply System At Stc Bsf Baikunthpur, (Sh :- Providing Of Submersible Pump & Service Connection).
Tender Overview
Project Description
Tender for Augmentation And Replacement Of Water Supply System At Stc Bsf Baikunthpur, (Sh :- Providing Of Submersible Pump & Service Connection).
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 20-Nov-2026 | cancellation of tender | Financial Bid | 25-Nov-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Providing & Installation of 20 HP 415 V, 3- phase Monoblock pump set suitable for 18-50 mtr head and 2337-413 LPM discharge, with 100 mm x 80 mm suction/ delivery Texmo/Crompton/Kirlosker/L&T/ KSB & compatible to KSB make & model No ULTRA+ 2050). |
| 2 | Providing & Installation of star-delta starter suitable upto 30 HP (Relay max range 14-23 Amp) submersible pump make C&S/HPL/Simense/L&T/ & compatible to L&T make & model No fully automatic S/D starter Cat ref - MN 25 FASD |
| 3 | Providing & Installation of DOL starter suitable upto 5 HP (Relay max range 6-10 Amp) submersible pump make C&S/HPL/Simense/L&T/ & compatible to L&T make & model No f MU-G10 DOL starter Cat ref - MU-G10 DOL |
| 4 | Providing & Installation of 5 HP 400 V, 3- phase Submersible pump set suitable for 150 mm deep tube well capable of discharge 60,000 ltr/hr clear water with a total head 48 mtr [Average Head rang 14-72 mtr ] etc. complete as required make Texmo/Crompton/Kirlosker/L&T/ KSB & compatible to KSB make & model No CORA 18C + UMAI 100, 3.7/22 |
| 5 | Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, makingconnections, Ics=100% Icu and Operational Voltage 690V etc. as required. A) 100 Amp, 16 KA, TP MCCB |
| 6 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required. i) 63 mm dia (OD-63 mm & ID-51 mm nominal) |
| 7 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering. i) Upto 35 sq. mm |
| 8 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering. ii) Above 35 sq. mm and upto 95 sq. mm |
| 9 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required. i) Upto 35 sq. mm |
| 10 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required. ii) Above 35 sq. mm and upto 95 sq. mm |
| 11 | Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. i) Upto 35 sq. mm |
| 12 | Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. ii) Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp) |
| 13 | Providing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade (as per IS 7098 (part-I) 1988 with upto date amendments) alluminium conductor armoured power cable of following size as required. (Make Havells/ KEI/ Polycab) i) 3.5 X 35 Sqmm |
| 14 | Providing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade (as per IS 7098 (part-I) 1988 with upto date amendments) alluminium conductor armoured power cable of following size as required. (Make Havells/ KEI/ Polycab) ii) 3.5 X 50 Sqmm |
| 15 | SITC of 600 mm X 500 mm x 450 mm sizes water protected outdoor (Water proof) hut type double door joint/ termination box both side opening with hinged door, locking arrangement made out of 2 mm thick CRCA sheet with required hardware duly painted with powder coated. Panel having separate detachable gland plate, angle iron base frame made out of 50mm x 50mm x 5mm angle iron (minimum height 60cm from ground level), earth bar/stud, led pilot light for phase indicator (R,Y,B) on top, 415V, 200 amp rated , 4 strip aluminum bus bar duly PVC sleeved, connection inter–connection with aluminium cable i/c welding, painting & grouting the legs in existing ground with 1:3:6 cement concrete foundation etc. (Panel should be as per design & drawing approved by Engg in charge) |
| 16 | Dismantling of existing LT overhead line including 4 Nos conductors (3 phase + Neutral) , Insulators, Cross - arms and accessories, with lowering, loading, transportation, unloading and staking of dismantled store at US store of STC ,complete as directed by Engineer-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedCorrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 2 daysBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender