Public Administrative Department Local Bodies Closing in 3 days TDR #58603352

Tender For Urgent Repair Works For Operational Improvement Of Slaughter House, Industrial Area, Phase-L, Chandigarh (Ch To Solid Waste Management Revenue Head Minor Works)

Issued by Local Bodies · Chandigarh, Chandigarh
Tender Value
13.05 Lakhs
Estimated cost
Bid Submission
26 Nov 2026
3 days left
EMD
26100
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Chandigarh → Chandigarh
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Urgent Repair Works For Operational Improvement Of Slaughter House, Industrial Area, Phase-L, Chandigarh (Ch To Solid Waste Management Revenue Head Minor Works)

BOQ

Name of Work:- Urgent Repair Works for Operational Improvement of Slaughter House, Industrial Area, Phase-l, Chandigarh (Ch to SWM Revenue Head Minor Works)
Sl. No. Item Description
1Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : of Area 3 sqm and Below (DSR : 15.12.1)
2Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead.15.52
3Dismantling tile work in floors and wall laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm 15.23.1
4Chipping of existing cement concrete/RCC floor surface to an average depth of 50 mm (2 inches) by using electric chipping hammers, breakers and hand tools, including removal ofloose concrete, roughening of surfacee, cleaning with wire brushes and air/water jet,collection of dismantled material, loading, transportation and disposal of debris withinmunicipal limits, all leads and lifts, labour, tools & plants, safety provisions, complete asdirected by Engineer-in-Charge.
5Providing and fixing aluminium work for doors, windows, ventilators and partitions withextruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : Powder coated aluminium (minimum thickness of powder coating 50 micron) For fixed portion 21.1.1.2
6For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15 Powder coated aluminium (minimum thickness of powder coating 50 micron) (21.1.2.2)
7Providing and fixing aluminium composite panel in any colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel fixed in aluminium doors, windows shutters and partition frames with C.P brass / stqainless steel screws etc. complete as per architectural drawings and directions of Engineer-In-Charge.
8Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) (DSR :21.3.2)
9Providing and fixing using wire guage 22x12 in aluminium door, window, ventilator shutter and partitions etc. with beading. complete as per the architectural drawing and the direction of Engineer-In-Charge
10Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sq.m including pointing the joints with white cement and matching pigments etc., complete. (DSR :11.38)
11Providing and fixing 1st quality ceramic glazed wall tile confirming to IS: 15622 (thicness to be specified by the manufacture of approved make in all colours shade except burgundy, bottle green, black of any size as approved by Engineer-in-charge in skirting, riswrs of steps anddados over 12mm thick bed of cement mortar 1:3 (: 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including painting in white cement mixad with pigment of matching shade complete in all respect to the entire satisfaction of the Enginner-In-Charge.(DSR:8.31)
12Providing and placing in position Micro concrete (M40) work for flooring which shall be cement based prepacked single component, chloried free, non shrink, free flow self compacting, ready to use after mixing water in specified proportions obtained from specified manufacturer like SIKA, Ultratech or equivalent and as per direction of Engineer-in-charge
13Brick work with old dismantling brick in all Levels with Cement mortar 1:4 (1 cement : 4 coarse sand) as per site Eingneer-In-Charge (N.S)
14Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes complete in all respect to enitre satisfaction of EIC.(DSR 6.1.1)
15Providing and fixing 1.2 metre high GI barbed wire fencing with RCC angle concrete posts(100mm x 100mm at bottom and 75mm x 75mm at top), 1.8m long, placed at 3.0m c/c, founded in M15 grade cement concrete 0.60m below ground level, including excavation, concrete foundation, struts, GI staples, turn buckles, stretching, fixing, curing, tools & plants, labour and all incidental charges complete in all respect to the entire satisfaction of EngineerIn-Charge.(N.S)
16Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixturescomplete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid (DSR 17.2.1)
17Providing and fixing white vitreous china flat back or wall corner type lipped front large urinal basin of brand cera, hindware or equivalent with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings andbrackets, cutting and making good the walls and floors wherever required complete in all respect to the entire satisfaction of EIC
18Providing and fixing wash basin with C.I. brackets, 15 mm PTMT pillar cock, 32 mm PTMT waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. White Vitreous China Flat back wash basin size550x400 mm with single 15 mm PTMT pillar cock. (DSR 17.7.B)
19Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in -charge. (DSR 17.16A)
20Providing and fixing PTMT bib cock of approved quality and colour. 15mm nominal bore, 86 mm long, weighing not less than 88 gms (DSR : 18.54.1)
21Providing and fixing PTMT angle stop cock 15 mm nominal bore, weighing not less than 85 gms (DSR : 18.63)
22Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 40 mm dia (DSR 17.28.2.2)
23De-silting and cleaning of existing sewer lines using super suction machine and taking out of debris/silt etc. including safe disposal of silt with in municipal limit as directed by EIC. Including the cost of driver & allconsumbles like diesel, oil water etc. provision for diversionof lineitrequired with the help of sewerage pumps, power, backup fromGen setsfor running of pumps, night lighting etc. barricades, displayof sign boards, manpower, sewerman to cary out the entire operation alongwith the saftyequipment etc, including the cost of CCTV coverage of lines after desilting complete in all respects for sewer lines of following sizes :Lines of dia meter 300mm to 400mm (12\\" to 24\\")
24Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks,mounted on specially designed pipe shaft with brackets, side guides and arrangements forinside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of requiredthickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cover (DSR :10.6.1)
25Laying old cement concrete interlocking paver blocks of any design/ shape laid in required line, level, curvature, colour and pattern over and including 20mm thick compacted bed of cement sand mortar 1:4 including grouting the joints with cement mortar etc. all complete asper the direction of Engineer-in-charge.
26Providing and laying 60mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over 20mm thick cement sand mortar 1:4 including grouting the joints with cement mortar etc. all complete as per the direction of Engineer-in-charge.
27Providing and laying repair of patch with ready mix bitumenous material of avg. 20mm thickness to cover patch/pot holes, of Damaged road surface complete in the all respect including cost of ready mix bituminous cold material CRRI approved in the begs of 50 kg to the entire satisfaction of the Engineer-in-charge.
28Providing and fixing transparent flexible PVC strip curtain comprising 2 mm thick, 200 mm wide clear PVC strips with 50% overlap, including GI suspension rail, clamps, hangers, nuts,bolts, washers and all fixing accessories, complete with cutting, fitting, fixing and installation atall heights as directed by Engineer-in-Charge.
29Providing and laying precast RCC half round drain channels/pipes of 200 mm internal diameter, manufactured from M-30 grade concrete,in existing drains including cleaning of drain bed and side surfaces, alignment, cutting to required lengths, placing in true line andlevel,making watertight joints with cement mortar 1:3 admixed with approved waterproofing compound, curing, testing, loading, unloading, transportation, handling, labour, tools & plants and all incidental works complete as directed by the Engineer-in-Charge.
30Constructing brick masonry manhole in cement mortar 1:4 (1 cement : 4 coarse sand) with RCC top slab in 1:1.5:3 mix, foundation concrete 1:4:8 mix, inside plastering 12 mm thick in CM 1:3 finished with floating coat of neat cement and making channels in CC 1:2:4 finishedwith floating coat of neat cement complete as per standard design, inside size 90 cm x 80 cm and 45 cm deep including CI cover with frame (light duty) 455 x 610 mm internal dimensions,total weight not less than 38 kg, with common burnt clay FPS non-modular bricks of classdesignation 7.5. complete in all respect to entire satisfaction of EIC.
31Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality, LD2.5, complete in all respect to the entire satisfaction of EIC
32Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete
33Credit of old dismantled doors etc Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58603352
AUTHORITY Local Bodies
TENDER VALUE 13.05 Lakhs
LAST DATE 26-11-2026
Authority
Authority Name Municipal Corporation
Work Description Tender for Urgent Repair Works For Operational Improvement Of Slaughter House, Industrial Area, Phase-L, Chandigarh (Ch To Solid Waste Management Revenue Head Minor Works)
Basic Detail
Tender No MCC/R1/2026/175
Bidding Type Tender
Location
City Chandigarh
State Chandigarh
Key Dates
Publish Date 19 Nov 2026
Submission Date 26 Nov 2026
Open Date 26 Nov 2026
Finance
Tender Value 13.05 Lakhs
Tender Fee 1000
EMD 26100
Exemption Not Available
Document List
46e78b77-3660-4514-8da0-c62251f7bfe8.html
BOQ_119277.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 19, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 26, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 3 days
Nov 26, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 3 days

Tender Documents

Download All (ZIP) ↓
html

46e78b77-3660-4514-8da0-c62251f7bfe8.html

xls

BOQ_119277.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender