Health and Family Welfare Government Departments Closing in 11 days TDR #58603351

Tender For Renovation Of H.No. 767A (Type-11) Sector-7, Chandigarh. ( Ibm Scheme No. W4/2026/26413)

Issued by Government Departments · Chandigarh, Chandigarh
Tender Value
98627
Estimated cost
Bid Submission
02 Dec 2026
11 days left
EMD
1973
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Chandigarh → Chandigarh
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Renovation Of H.No. 767A (Type-11) Sector-7, Chandigarh. ( Ibm Scheme No. W4/2026/26413)

BOQ

Name of Work:- Renovation of H.No. 767A (Type-11) Sector-7, Chandigarh. ( IBM Scheme No. W4/2026/26413)
Sl. No. Item Description
1Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m :DSR 2.10
2Pipes, cables etc, not exceeding 80 mm dia DSR 2.10.1.1
3Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : DSR 6.4
4Cement mortar 1:4 (1 cement : 4 coarse sand) DSR 6.4.1
5Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I.brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required:
6W.C. pan with ISI marked white solid plastic seat and lid. DSR 17.3.1
7Providing and fixing of C.P. brass Jet with brass nossel steel flange & PVC flexible pipe complete in all respect DSR 17.16A
8Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings :
9Flat back wash basin of size 550x400 mm DSR 17.25.2
10Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings as DSR 17.28
1132 mm dia DSR 17.28.2.1
12Providing and fixing soil, waste and vent pipes :DSR 17.35.1
1375mm diameter : DSR 17.35.2
14Centrifugally cast (spun) iron socket &spigot (S&S) pipe as per IS: 3989 DSR 17.35.2.2
15Providing and fixing Heel Rest Sanitary bend sanitary bend DSR 17.40
16100mm diameter :DSR 17.40.1
17Sand cast iron S&S as per IS - 3989 DSR 17.40.1.2
18Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : DSR 17.60
19100 mm inlet and 75 mm outlet DSR 17.60.2
20Sand cast iron S&S as per IS - 3989 DSR 17.60.2.1
21Providing and fixing G.I. pipes complete with G.I. fittings and clamps,i/c cutting and making good the walls etc. : DSR 18.10
2215 mm dia. nominal bore : DSR 18.10.1
2320 mm dia. nominal bore : DSR 18.10.2
24Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :DSR 18.17
2520 mm nominal bore DSR 18.17.1A
26Providing and fixing uplasticised PVC connection pipe with brass unions : DSR 18.21
2745 cm length : DSR 18.21.2
2815mm nominal bore DSR 18.21.2.1
29Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : DSR 18.46
3020 mm nominal bore : DSR 18.46.2
31Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. DSR 18.48
32Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 DSR 18.49
3315 mm nominal bore. DSR 18.49.1
34Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. DSR 18.51
3515 mm nominal bore. DSR 18.51.1
36Providing and fixing C.P. brass Stop Cock ( concealed ) of standard design and of approved quality conforming to IS: 8931 ) DSR 18.52
3715 mm nominal bore : DSR 18.52.1
38Providing and fixing CP Brass Extension Nipple ( Size 15 mm x 50 mm ) of approved make and quality as per direction of EIC DSR 18.53A
39Providing and fixing C.P. brass angle valve for basin mixer and geyser points ... DSR 18.53
4015 mm nominal bore. DSR 18.53.1
41Providing and fixing PTMT Ball Cock of approved quality, color and make complete with Epoxy Coated aluminium rod with LP/HPHD Plastic Ball
4220 mm Nominal Bore DSR 18.62.2
43Cutting holes up to 30x30 cm in walls including making good the same: DSR 18.76
44With common burnt clay F.P.S. (non modular) bricks : DSR 18.76.1
45Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof. : DSR 18.77
46Providing and fixing of C.P. Steel Grating Heavy (With hole without hole) 100 mm dia, of approved make
47Providing and fixing of CP Brass/SS Towel Ring with screws etc. to the satsifaction of EIC of approved make Jal Model No. 36524 Warna or equialent Model of CERA /Kerovit/ ESSCO
48Providing and fixing of CP Brass/SS Towel Rail 600mm of with screws etc. to the satsifaction of EIC of approved make Jal Model No. 36520 Warna or equialent Model of CERA /Kerovit/ ESSCO
49Providing and fixing of CP Brass/SS/ABS overhead shower with swiveling Joint , 125mm dia (min) with C.P Brass/ S.S Shower Arm and flange to the satsifaction of EIC of approved make ESSCO Model No. 536A & 542A or equialent Model of CERA /Kerovit/ Jal
50Providing and fixing of CP Brass/SS/ABS Soap Tray made of Plastic including glass bowl of approved make Jal Model No. 36540 or equialent Model of CERA /Kerovit/ ESSCO
51Providing and fixing of CP Pillar Cock of approved make
52Providing and fixing of CP Waste for Basin of approved make
53Providing and fixing of C.P. brass Cup ( Heavy Duty ) of approved make
54Providing and fixing HCI Cover with frame for GT & IC of approved make
55Prov. & fixing of looking mirror of size 450x600mm made with 5mm thick (minimum) superior quality glass including cost of hard board, PVC beading and C.P. Screw etc. to satisfaction of EIC of approved make
56Providing and fixing Stainless Steel A ISI 304 (18/8) Kitchen Sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required of Size 27\\" x 21\\" x 8\\" of approved make
57Providing & fixing Drip seal joint complete all respect.
5875mm Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58603351
AUTHORITY Government Departments
TENDER VALUE 98627
LAST DATE 02-12-2026
Authority
Authority Name Public Health Department.
Work Description Tender for Renovation Of H.No. 767A (Type-11) Sector-7, Chandigarh. ( Ibm Scheme No. W4/2026/26413)
Basic Detail
Tender No PH3/2026/551
Bidding Type Tender
Location
City Chandigarh
State Chandigarh
Key Dates
Publish Date 18 Nov 2026
Submission Date 02 Dec 2026
Open Date 02 Dec 2026
Finance
Tender Value 98627
Tender Fee Ref. Documents
EMD 1973
Exemption Not Available
Document List
03f2c8d9-3081-45b8-8e87-d6ee693374db.html
BOQ_119356.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 18, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 02, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 11 days
Dec 02, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 11 days

Tender Documents

Download All (ZIP) ↓
html

03f2c8d9-3081-45b8-8e87-d6ee693374db.html

xls

BOQ_119356.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender