Tender For Renovation Of House No. 1260, 1333, 1353, 1374 (Occupied House) And 36, 1438, 1184 (Vacant House), (Type-Xii Jd) In Sector-23, Chandigarh (Total 07 Nos. House) (Ibm No. W4/2026/26576).
Tender Value
8.29 Lakhs
Estimated cost
Bid Submission
01 Dec 2026
10 days left
EMD
16595
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chandigarh → Chandigarh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation Of House No. 1260, 1333, 1353, 1374 (Occupied House) And 36, 1438, 1184 (Vacant House), (Type-Xii Jd) In Sector-23, Chandigarh (Total 07 Nos. House) (Ibm No. W4/2026/26576).
BOQ
| Sl. No. | Item Description |
| 1 | Excavating trenches by mechinical / manual means of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, for all depth, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : DSR 2.10 |
| 2 | All kinds of soil |
| 3 | Pipes, cables etc, not exceeding 80 mm dia. DSR 2.10.1.1 |
| 4 | Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia. DSR 2.10.1.2 |
| 5 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :DSR 6.4 |
| 6 | Cement mortar 1:4 (1 cement : 4 coarse sand).DSR 6.4.1 |
| 7 | 12 mm cement plaster of mix :DSR 13.4 |
| 8 | 1:4 (1 cement: 6 Coarse sand).DSR 13.4.1 |
| 9 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : DSR 17.3 |
| 10 | W.C. pan with ISI marked white solid plastic seat and lid. DSR 17.3.1 |
| 11 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: DSR 17.7 |
| 12 | White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps DSR 17.7.3 |
| 13 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS : 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : DSR 17.10 |
| 14 | Kitchen sink without drain board: DSR 17.10.2 |
| 15 | 610x460 mm bowl depth 200 mm DSR 17.10.2.2 |
| 16 | Providing and fixing 8 mm dia C.P./ S.S. Jet with flexible tube upto1 Mtr long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by EIC DSR 17.16.A |
| 17 | Providing &fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. DSR 17.28 |
| 18 | Flexible pipe: DSR 17.28.2 |
| 19 | 32 mm dia: DSR 17.28.12.1 |
| 20 | 40 mm dia: DSR 17.28.2.2 |
| 21 | Providing and fixing soil, waste and vent pipes : DSR 17.35 |
| 22 | 100 mm dia. DSE 17.35.1 |
| 23 | Centrifugally cast (spun) iron socket &spigot (S&S) pipe as per IS: 3989. DSR 17.35.1.2 |
| 24 | 75mm diameter : DSR 17.35.2 |
| 25 | Centrifugally cast (spun) iron socketed pipeas per IS: 3989 DSR 17.35.2.2 |
| 26 | Providing and fixing collar : DSR 17.57 |
| 27 | 100 mm DSR 17.57.1 |
| 28 | Sand cast iron S&S as per IS - 3989: DSR 17.57.1.2 |
| 29 | 75 mm. DSR 17.57.2 |
| 30 | Sand cast iron S&S as per IS - 3989: DSR 17.57.2.2 |
| 31 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : DSR 17.60 |
| 32 | 100 mm inlet and 75 mm outlet : DSR 17.60.2 |
| 33 | Sand cast iron S&S as per IS - 3989: DSR 17.60.2.1 |
| 34 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.Internal work - Exposed on wall DSR 18.10 |
| 35 | 15 mm dia nominal bore DSR 18.10.1 |
| 36 | 20 mm dia nominal bore DSR 18.10.2 |
| 37 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work DSR 18.12 |
| 38 | 20 mm dia nominal bore DSR 18.12.2 |
| 39 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :DSR 18.17 |
| 40 | 20 mm nominal bore DSR 18.17.1A |
| 41 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :DSR 18.18 |
| 42 | 20 mm nominal bore DSR 18.18.2 |
| 43 | Providing & fixing uplasticised PVC connection pipe with brass unions : DSR 18.21 |
| 44 | 30cm length: DSR 18.21.1.1 |
| 45 | 15 mm nominal bore DSR 18.21.1.2 |
| 46 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) DSR 18.46 |
| 47 | 15 mm nominal bore DSR 18.46.1 |
| 48 | 20 mm nominal bore DSR 18.46.2 |
| 49 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank DSR 18.48 |
| 50 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : DSR 18.49 |
| 51 | 15 mm nominal bore DSR 18.49.1 |
| 52 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. DSR 18.51 |
| 53 | 15 mm nominal bore DSR DSR 18.51.1 |
| 54 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. DSR 18.52 |
| 55 | 15 mm nominal bore. DSR 18.52.1 |
| 56 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931: DSR 18.53 |
| 57 | 15mm nominal bore. DSR 18.53.1 |
| 58 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge.DSR 18.53A |
| 59 | Cutting holes up to 30x30 cm in walls including making good the same:l DSR 18.76.1 |
| 60 | With common burnt clay F.P.S. (non modular) bricks: DSR 18.76.1 |
| 61 | Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof. DSR 18.77 |
| 62 | Making chases up to 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc. DSR 18.78 |
| 63 | Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: |
| 64 | 100 x 100 mm size P-type DSR 19.4.1 |
| 65 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 DSR 19.4.1.1 |
| 66 | Construction of Curb consisting of cement concrete 1:2:4 including cost of C.P. hinged grating and cost of sand bajri etc. |
| 67 | Providing drip seal joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter : |
| 68 | 100 mm |
| 69 | 75 mm |
| 70 | Providing and fixing of C.P. Steel Grating Heavy (With hole without hole) 100 mm dia, of approved make |
| 71 | Providing and fixing of C.P. brass Cup ( Heavy Duty ) of approved make |
| 72 | Providing and fixing of CP Brass/SS Towel Ring with screws etc. to the satsifaction of EIC of approved make Jal Model No. 36524 Warna or equialent Model of CERA /Kerovit/ ESSCO |
| 73 | Providing and fixing of CP Brass/SS Towel Rail 600mm of with screws etc. to the satsifaction of EIC of approved make Jal Model No. 36520 Warna or equialent Model of CERA /Kerovit/ ESSCO |
| 74 | Providing and fixing of CP Brass/SS/ABS Soap Tray made of Plastic including glass bowl of approved make Jal Model No. 36540 or equialent Model of CERA /Kerovit/ ESSCO |
| 75 | Providing and fixing of 22\\"x16\\" (550x400) mm beveled edge mirror complete with 5 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete |
| 76 | Providing and fixing of CP Brass/SS/ABS overhead shower with swiveling Joint , 125mm dia (min) with C.P Brass/ S.S Shower Arm and flange to the satsifaction of EIC of approved make ESSCO Model No. 536A & 542A or equialent Model of CERA /Kerovit/ Jal |
| 77 | Conversion for OWC to EWC with 4\\" C.I. bend, 4\\" PVC collar 1 No 4\\" PVC pipe upto 1'-6\\" long including dismantling of OWC pan and floor and repair of flooring to its original complete in all respect.Stool |
| 78 | Providing and fixing Tank Nipple complete in all respect |
| 79 | 20 mm dia |
| 80 | Supplying and fixing in position pre-cast RCC/SFRC Cover with frame of quality MD-10 and size 450mm |
| 81 | Providing, fixing and testing of gun metal peet valve for Public Health Works complete in all respect to satisfaction of EIC |
| 82 | 15mm i/d |
| 83 | Dismantling of Old material, not reuseable, including GI / HCI Pipe & Specials, Faucets, Ceramic Fixtures, PVC tanks & allied items and disposal of malba including that of chase from site to a approved dumping site complete. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysDec 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender