Health and Family Welfare Government Departments Closing in 10 days TDR #58603343

Tender For Renovation Of House No.91, 269, 1250 & 1345 (Occupied House) And 46, 58, 67, 73 ,78, 96, 1191, 1221, 1257 & 1442 (Vacant House) Type-Xii Jd, Sector-23, Chandigarh (Total 14 Nos. Houses) (Ibm No. W4/2026/26646)

Issued by Government Departments · Chandigarh, Chandigarh
Tender Value
16.48 Lakhs
Estimated cost
Bid Submission
01 Dec 2026
10 days left
EMD
32977
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Chandigarh → Chandigarh
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Renovation Of House No.91, 269, 1250 & 1345 (Occupied House) And 46, 58, 67, 73 ,78, 96, 1191, 1221, 1257 & 1442 (Vacant House) Type-Xii Jd, Sector-23, Chandigarh (Total 14 Nos. Houses) (Ibm No. W4/2026/26646)

BOQ

Name of Work:- Renovation of House No.91, 269, 1250 & 1345 (Occupied House) and 46, 58, 67, 73 ,78, 96, 1191, 1221, 1257 & 1442 (vacant House) Type-XII JD, Sector-23, Chandigarh (Total 14 Nos. Houses) (IBM no. W4/2026/26646)
Sl. No. Item Description
1Excavating trenches by mechinical / manual means of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, for all depth, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : DSR 2.10
2All kinds of soil
3Pipes, cables etc, not exceeding 80 mm dia. DSR 2.10.1.1
4Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia. DSR 2.10.1.2
5Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :DSR 6.4
6Cement mortar 1:4 (1 cement : 4 coarse sand).DSR 6.4.1
712 mm cement plaster of mix :DSR 13.4
81:4 (1 cement: 4 Coarse sand).DSR 13.4.1
9Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : DSR 17.3
10W.C. pan with ISI marked white solid plastic seat and lid. DSR 17.3.1
11Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: DSR 17.7
12White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps DSR 17.7.3
13Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS : 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : DSR 17.10
14Kitchen sink without drain board: DSR 17.10.2
15610x460 mm bowl depth 200 mm DSR 17.10.2.2
16Providing and fixing 8 mm dia C.P./ S.S. Jet with flexible tube upto1 Mtr long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by EIC DSR 17.16.A
17Providing &fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. DSR 17.28
18Flexible pipe: DSR 17.28.2
1932 mm dia: DSR 17.28.12.1
2040 mm dia: DSR 17.28.2.2
21Providing and fixing soil, waste and vent pipes : DSR 17.35
22100 mm dia. DSE 17.35.1
23Centrifugally cast (spun) iron socket &spigot (S&S) pipe as per IS: 3989. DSR 17.35.1.2
2475mm diameter : DSR 17.35.2
25Centrifugally cast (spun) iron socketed pipeas per IS: 3989 DSR 17.35.2.2
26Providing and fixing collar : DSR 17.57
27100 mm DSR 17.57.1
28Sand cast iron S&S as per IS - 3989: DSR 17.57.1.2
2975 mm. DSR 17.57.2
30Sand cast iron S&S as per IS - 3989: DSR 17.57.2.2
31Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : DSR 17.60
32100 mm inlet and 75 mm outlet : DSR 17.60.2
33Sand cast iron S&S as per IS - 3989: DSR 17.60.2.1
34Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.Internal work - Exposed on wall DSR 18.10
3515 mm dia nominal bore DSR 18.10.1
3620 mm dia nominal bore DSR 18.10.2
37Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work DSR 18.12
3820 mm dia nominal bore DSR 18.12.2
39Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :DSR 18.18
4020 mm nominal bore DSR 18.18.2
41Providing & fixing uplasticised PVC connection pipe with brass unions : DSR 18.21
4230cm length: DSR 18.21.1
4315 mm nominal bore DSR 18.21.1.1
44Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) DSR 18.46
4515 mm nominal bore DSR 18.46.1
4620 mm nominal bore DSR 18.46.2
47Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank DSR 18.48
48Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : DSR 18.49
4915 mm nominal bore DSR 18.49.1
50Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. DSR 18.51
5115 mm nominal bore DSR DSR 18.51.1
52Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. DSR 18.52
5315 mm nominal bore. DSR 18.52.1
54Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931: DSR 18.53
5515mm nominal bore. DSR 18.53.1
56Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge.DSR 18.53A
57Cutting holes up to 30x30 cm in walls including making good the same:l DSR 18.76.1
58With common burnt clay F.P.S. (non modular) bricks: DSR 18.76.1
59Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof. DSR 18.77
60Making chases up to 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc. DSR 18.78
61Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:
62100 x 100 mm size P-type DSR 19.4.1
63With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 DSR 19.4.1.1
64Construction of Curb consisting of cement concrete 1:2:4 including cost of C.P. hinged grating and cost of sand bajri etc.
65Providing drip seal joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter :
66100 mm
6775 mm
68Providing and fixing of C.P. Steel Grating Heavy (With hole without hole) 100 mm dia, of approved make
69Providing and fixing of C.P. brass Cup ( Heavy Duty ) of approved make
70Providing and fixing of CP Brass/SS Towel Ring with screws etc. to the satsifaction of EIC of approved make Jal Model No. 36524 Warna or equialent Model of CERA /Kerovit/ ESSCO
71Providing and fixing of CP Brass/SS Towel Rail 600mm of with screws etc. to the satsifaction of EIC of approved make Jal Model No. 36520 Warna or equialent Model of CERA /Kerovit/ ESSCO
72Providing and fixing of CP Brass/SS/ABS Soap Tray made of Plastic including glass bowl of approved make Jal Model No. 36540 or equialent Model of CERA /Kerovit/ ESSCO
73Providing and fixing of 22\\"x16\\" (550x400) mm beveled edge mirror complete with 5 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete
74Providing and fixing of CP Brass/SS/ABS overhead shower with swiveling Joint , 125mm dia (min) with C.P Brass/ S.S Shower Arm and flange to the satsifaction of EIC of approved make ESSCO Model No. 536A & 542A or equialent Model of CERA /Kerovit/ Jal
75Conversion for OWC to EWC with 4\\" C.I. bend, 4\\" PVC collar 1 No 4\\" PVC pipe upto 1'-6\\" long including dismantling of OWC pan and floor and repair of flooring to its original complete in all respect.Stool
76Providing and fixing Tank Nipple complete in all respect
7720 mm dia
78Supplying and fixing in position pre-cast RCC/SFRC Cover with frame of quality MD-10 and size 450mm
79Providing, fixing and testing of gun metal peet valve for Public Health Works complete in all respect to satisfaction of EIC
8015mm i/d
81Dismantling of Old material, not reuseable, including GI / HCI Pipe & Specials, Faucets, Ceramic Fixtures, PVC tanks & allied items and disposal of malba including that of chase from site to a approved dumping site complete. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58603343
AUTHORITY Government Departments
TENDER VALUE 16.48 Lakhs
LAST DATE 01-12-2026
Authority
Authority Name Public Health Department.
Work Description Tender for Renovation Of House No.91, 269, 1250 & 1345 (Occupied House) And 46, 58, 67, 73 ,78, 96, 1191, 1221, 1257 & 1442 (Vacant House) Type-Xii Jd, Sector-23, Chandigarh (Total 14 Nos. Houses) (Ibm No. W4/2026/26646)
Basic Detail
Tender No PH3/2026/549
Bidding Type Tender
Location
City Chandigarh
State Chandigarh
Key Dates
Publish Date 18 Nov 2026
Submission Date 01 Dec 2026
Open Date 01 Dec 2026
Finance
Tender Value 16.48 Lakhs
Tender Fee Ref. Documents
EMD 32977
Exemption Not Available
Document List
9e0edd63-23d4-4e86-8e55-3650a8af2be2.html
BOQ_119352.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 18, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 01, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 10 days
Dec 01, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 10 days

Tender Documents

Download All (ZIP) ↓
html

9e0edd63-23d4-4e86-8e55-3650a8af2be2.html

xls

BOQ_119352.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender