Tender For Yearly Maintenance Of Khumulwng Water Treatment Plant (0.30 Mgd Capacity) Sh: Fitting, Fixing Of Electrical Accessories And Mechanical Equipments And Other Allied Works During The 2026-27.
Tender Value
9.58 Lakhs
Estimated cost
Bid Submission
26 Nov 2026
6 days left
EMD
19164
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
tripura → Tripura
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Yearly Maintenance Of Khumulwng Water Treatment Plant (0.30 Mgd Capacity) Sh: Fitting, Fixing Of Electrical Accessories And Mechanical Equipments And Other Allied Works During The 2026-27.
BOQ
| Sl. No. | Item Description |
| 1 | Providing and fitting fixing steel sheet enclosed switch fuse unit (suitable for DIN fuses), triple pole with Neutral Link (TPN), 415/500 Volt, L & T / Havells / BCH make etc. complete as per specification and direction of the Engineer-in-charge. |
| 2 | i) 100 amps |
| 3 | ii) 200 amps |
| 4 | Providing and fitting fixing of Fully Automatic Star Delta type Motor starter ( 3 ph. 50 Hz, 415V, in Steel Sheet Enclosures with Contractors and Timer etc. complete suitable for submersible Pump L & T, BCH, ABB make as per specification and direction of the Engineer-in-charge. |
| 5 | i) 75 HP/ 55 kw Relay range within 45-75 + 10% |
| 6 | ii) 100 HP/ 75 kw Relay range within 45-75 + 10% |
| 7 | Providing and fitting fixing with PVC insulated single core multistrand Copper cable conforming to IS : 694 for inter connection with all electrical equipments of the pannel board as per specification and direction of the Engineer-in-charge. |
| 8 | i) 16.0 sqmm |
| 9 | Providing and fitting fixing with PVC insulated 3 core flat Copper cable conforming to relevant IS code for submerssible motor with all necessary equipments and fittings as required as per specification and direction of the Engineer-in-charge. |
| 10 | i) 10.0 sqmm |
| 11 | Providing and fitting fixing of moving iron type, Range 0-500 V, 96 mm x 96 mm size AC Volt meter ( L & T / AE make) with selector switch as a electrical instrument of the pannel board as per specification and direction of the Engineer-in-charge. |
| 12 | Providing and fitting fixing of moving iron type, Range 0-100/0-200 amps, 96 mm x 96 mm size AC Amps meter direct reading type (L & T/ AE make) with selector switch and CT coil as a electrical instrument of the pannel board as per specification and direction of the Engineer-in-charge. |
| 13 | Providing and fitting fixing of Moulded Case Circuit Breaker (MCCB) of different Thermal release range , 415 + V, 50Hz (L & T, BCH, ABB make) as per specification and direction of the Engineer-in-charge. |
| 14 | i) 80-100 Amps |
| 15 | Providing earthing with perforated 40 mm dia G.I. pipe (Medium class) (12 mm dia perforation), laying of 4 mm dia GI wire from earth electrode to panel, including excavating hole of 600 mm dia and refilling with Salt and Charcoal / coke in alternate layers of 300 mm , as per standard specification and direction of the Engineer-in-charge. |
| 16 | i) For 3-phase connection with 4.00 mtr. Long G.I. pipe |
| 17 | Providing and fitting fixing 3 phase indicating lamp fiited with panel board with three different colour lamps with batten holder complete as per specification and direction of the Engineer-in-charge. |
| 18 | Providing and fitting fixing heavy duty box type (Resin filled) power factor correction capacitor L & T make etc. complete as per specification and direction of the Engineer-in-charge. |
| 19 | i) 5-15 kVAr 440 V |
| 20 | Providing and fitting fixing single phase preventer + selectable under voltage + selectable over voltage with delay selectable off delay 15 sec and on delay 5 sec and phase asymmetry 10 % of L&T /BCH/HAVELLS/SIEMEN etc. make complete as per direction of the Engineer-in-charge. |
| 21 | Providing and fixing C.I. non-return valve of approved quality as per of CPWD specification and direction of the Engineer - in - charge. |
| 22 | i) 100 mm nominal bore |
| 23 | Providing and fixing C.I. sluice valves ( with cap ) complete with bolts, nuts, rubber insertions etc. ( the tail pieces if required will be paid separately ) as per CPWD specification and direction of the Engineer - in - charge. |
| 24 | i) 200 mm dia./PN-1.6 |
| 25 | ii) 150 mm dia./ PN - 1.6 |
| 26 | iii) 100 mm dia / PN - 1.6 |
| 27 | Providing & fabrication of column pipe including fitting fixing of G.I. flange by cutting the GI pipe ( conforming to IS : 1239 medium class ) into 3.05 mtr. long and welding the same with GI flange as per specification and direction of the Engineer-in-charge ( G.I. pipe will be provided by the agency at his own cost & risk). |
| 28 | i) For 100 mm dia G.I. pipe with 10 mm thick GI flange |
| 29 | Providing and fixing G.I. equal Tee with the pipe line including testing of joints complete as per CPWD specification and direction of the Engineer - in - charge. |
| 30 | i) 80 x 80 x 80 mm dia |
| 31 | ii) 150 x 150 x 150 mm dia |
| 32 | Providing and fixing G.I. Unequal Tee with the pipe line including testing of joints complete as per CPWD specification and direction of the Engineer - in - charge. |
| 33 | i) 100 x 100 x 80 mm dia |
| 34 | Providing and fixing G.I. Reducer with the pipe line including testing of joints complete as per CPWD specification and direction of the Engineer - in - charge. |
| 35 | i ) 100 x 80 mm dia |
| 36 | ii) 150 x 100 mm dia |
| 37 | Providing & fitting fixing of G.I. flange ( 10 mm wall thickness ) by welding with G.I. / MS pipe and placing position as per specification and the direction of the Engineer-in-charge. |
| 38 | i) 150 mm dia |
| 39 | ii) 100 mm dia |
| 40 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. all complete. |
| 41 | i ) Fixed to steel windows by welding. |
| 42 | Steel work welded in built up section/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using steel etc. complete as required:- |
| 43 | i)In grating, frames, guard bar, railing, brackets, gates and similar works, all complete. |
| 44 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade [Payment shall be made after submission of Test Certificate issued by the Manufacturer]: |
| 45 | i) Two or more coats on new work |
| 46 | Reparing of non-functional air blower of 300m3 / hr. capacity by dismantling, replacement of damaged parts, oiling, greasing & reassembling, realiegnment of mtc pulley, motor pulley etc. to make the blower functional as per direction of the Engineer-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysNov 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender