Coal and Mines Boards / Undertakings / PSU Closing in 7 days TDR #58603171

Tender For Sanitary Work Of Qtr.No. D-6 And C-130 At Harina Colony Under Barora Area

Issued by Boards / Undertakings / PSU · Dhanbad, Jharkhand
Tender Value
1.18 Lakhs
Estimated cost
Bid Submission
28 Nov 2026
7 days left
EMD
1500
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Dhanbad → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Sanitary Work Of Qtr.No. D-6 And C-130 At Harina Colony Under Barora Area

BOQ

Name of Work:- Sanitary work of Qtr.no. D-6 and C-130 at Harina Colony under Barora Area
Sl. No. Item Description
1Item Description/ Heading
2Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba allcomplete as per directions of Engineer-in-Charge
3Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid
4Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests
5Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require :White Vitreous China Flat back wash basin size 450x 300 mm with single 15mm C.P.brass pillar tap
6P/F P.V.C. low level flushing cistern IS : 7231, with all fittings and fixtures complete
7Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :470x420 mm bowl depth 178 mm
8Providing and fixing PTMT stop cock of approved quality and colour 20 mm nominal bore, 89 mm long, weighing not less than 88 gms
9Providing and fixing PTMT angle stop cock 15 mm nominal bore, weighing not less than 85 gms
10Providing and fixing PTMT bib cock of approved quality and colour 15 mm nominal bore, 122mm long, weighing not less than 99 gms
11P/F UPVC Pipe including all necessary fittings (20 mm dia)
12P/F UPVC Pipe including all necessary fittings (15 mm dia)
13Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only. Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily Double charge vitrified tile polished finish of size Size of Tile 600 x 600 mm
14Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
15Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
16Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm
17Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead:
18Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
19Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws :30 mm thick shutters Kiln seasoned and chemically treated hollock wood
20For shutters of doors, windows & ventilators including providing and fixing hinges/ pivotsand making provision for fixing of fittings wherever required including the cost of EPDMrubber / neoprene gasket required (Fittings shall be paid for separately)
21Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete.With 2nd class teak wood beading 62X19 mm
2212 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand)
23Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : 125 mm
24Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : 150x10 mm
25Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : 250x16 mm
26Total impact of GST for the purpose of CTC Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58603171
AUTHORITY Boards / Undertakings / PSU
TENDER VALUE 1.18 Lakhs
LAST DATE 28-11-2026
Authority
Authority Name Bharat Coking Coal Limited
Work Description Tender for Sanitary Work Of Qtr.No. D-6 And C-130 At Harina Colony Under Barora Area
Basic Detail
Tender No GM/AR-I/Civil/e-NIT/26-27/65 Dt 18.11.2026
Bidding Type Tender
Location
City Dhanbad
State Jharkhand
Key Dates
Publish Date 18 Nov 2026
Submission Date 28 Nov 2026
Open Date 30 Nov 2026
Finance
Tender Value 1.18 Lakhs
Tender Fee Ref. Documents
EMD 1500
Exemption Not Available
Document List
1b0aca52-5911-475f-a9e3-0cb5dce7376b.html
BOQ_382199.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 18, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 28, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 7 days
Nov 30, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 9 days

Tender Documents

Download All (ZIP) ↓
html

1b0aca52-5911-475f-a9e3-0cb5dce7376b.html

xls

BOQ_382199.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender