Tender For Repairs To The Existing Damaged Ac Roof Sheet With Galvalume Sheet Of Work Shop In Hvf Training School At Hvf, Avadi
Tender Value
48.76 Lakhs
Estimated cost
Bid Submission
03 Dec 2026
12 days left
EMD
98000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Thiruvallur → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs To The Existing Damaged Ac Roof Sheet With Galvalume Sheet Of Work Shop In Hvf Training School At Hvf, Avadi
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of Asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings, claddings, ridges, hips, valleys and flashings AC valley gutters etc., including loosening rusted bolts, cutting wherever required and staking at Ground without damaging sheets. The contractor is responsible for safe removal of AC sheets by loosening, cutting, welding of existing corroded bolts, screws etc., |
| 2 | S & F of Pre-painted(SMP) galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm (TCT) thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall fixed with self drilling / self tapping anti corrosive screws with EPDM seal complete all as per manufacturers specifications and instructions and as approved and as directed including all necessary scaffolding and safety aspects complete as required at site. |
| 3 | S & F of Pre-painted(SMP) galvalume aluminium zinc coating GI based plain steel sheet 0.50mm (TCT) thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall fixed with self drilling / self tapping anti corrosive screws with EPDM seal complete all as per manufacturers specifications and instructions and as approved and as directed including all necessary scaffolding and safety aspects complete as required at site. |
| 4 | Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets. |
| 5 | S & F of 6mm thick galvanised mild steel in valley gutter (Mass of Zinc Coating shall be as per IS 4759-1996 Table 1 minimum value shall be 610 gram per square metre). The galvanised steel sheet shall be jointed with welding and shall be grinded to have a levelled surface. The stiffeners of 150 mm width shall be provided below every joint and the same shall also be welded on all sides to get a single joint without any holes/leakages. The gutter shall be welded and placed as per the site condition. the rates include provision of the galvanised steel spouts in the valley gutters by making circular holes in the valley gutter and full circular welding of the spouts to discharge the rainwater to the PVC down take pipes of dia 160 mm of suitable sizes of galvanised steel spouts to be made and fixed complete all as per specifications and instructions and as directed and completed all as per specifications and instructions . The GI Gutters should have cross sectional joints only and water should be stored in the newly laid gutter for 72Hours for leakage test. The contractor should ensure all safety precaution required for the work shall be strictly followed including all necessary scaffolding and safety aspects complete as required at site. |
| 6 | Taking down eaves gutters and rainwater pipes (any size or pattern or any material), including all fittings, heads, shoes, bends, swan-necks, etc., fitted in MS straps/bands by loosening bolt, welding, grinding wherever required without damaging MS band/strap for re-use including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) including all necessary scaffolding and safety aspects complete as required at site including handing over of rain water pipes to CE Stores. |
| 7 | S & F of PVC pipe of 160 mm dia to walls / roof / steel structure or (10Kg/cm2) in trenches including all fittings like clamps, bend, Tee, 'Y', elbow etc., with or without access door as directed including necessary PU sealant, bolts, nuts, washers and welding wherever required (measured overall as fixed along the centre line over fittings) and as approved and directed including all necessary scaffolding and safety aspects complete as required at site. The rate includes provision of wall/floor opening/cutting and making good after laying the pipe line wherever required. |
| 8 | Supply of articulating hydraulic boom lift truck mounted type which can reach up to the height of 15 to 25 metres including necessary diesel for operating the articulated boom lift per day including a operator who will operate the articulated boom lift. The boom lift shall be used only for ensuring safety aspects at site like tying of net, tying of life line etc., boom lift timings shall be counted from start of the work in the day at site to completion of the work on that day |
| 9 | Supply and fixing of steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240. |
| 10 | M & L for painting of steel Surfaces of any description over 10cm in width or girth with two coats of synthetic enamel paint over a coat of red oxide ,zinc chrome primer including preparing old surfaces. |
| 11 | Less Credit for Dismantled ASBESTOS SHEETS, Bands, Barge board etc., the contractor is responsible for safe dismantling of AC sheets with out damaging them Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysDec 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender