Tender For Repair To Hardstanding, Foothpath, Fencing, View Cutter And Allied Works At Leimakhong Mil Stn.
Tender Value
39.95 Lakhs
Estimated cost
Bid Submission
10 Dec 2026
18 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kangpokpi → Manipur
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Hardstanding, Foothpath, Fencing, View Cutter And Allied Works At Leimakhong Mil Stn.
BOQ
| Sl. No. | Item Description |
| 1 | Schedule 'A' |
| 2 | Dismantling of wrought iron of mild steel work of any description not otherwise provided complete all as specified and as directed. |
| 3 | Dismantling of existing RCC/Steel/Wooden posts or struts (wood, steel or RCC) of any section concrete brick work, masonary etc. Including taking out embedded portion and making good disturb ground complete all specified and as directed. |
| 4 | Demolition of cement concrete un- reinforced of any description and in any position not otherwise specifically provided for including removing the debris out side the premises of MoD land of deposting at low laying area complete all as specified and directed |
| 5 | Demolition of RCC of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition).including removing the debris out side the premises of MoD land of deposting at low laying area complete all as specified and directed |
| 6 | Demolition of brick or stone/boulder masonry built in cement mortar complete all as specified and as directed. |
| 7 | Taking down cement plaster of any description from brick wall surfaces etc including racking out joints and hacking for key, scrubbing down with water etc complete all as specified and as directed. |
| 8 | M&L cement concrete type D-2, 1:4:8 (using 40mm graded aggregate) as in foundations, filling and mass concrete complete all as specified and directed. |
| 9 | M&L for providing cement concrete type B1 1:2:4 (using 20mm graded aggregate) as in copings complete all as specified and as directed. |
| 10 | M&L for brickwork with sub class 'B' bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed. |
| 11 | Rendering 15mm thick Cement plaster with (1:4)cement mortar to fair faces of brick wall and finished ,even & Smooth(without using extra cement) as directed using WPC @ 2% by wt of cement. (Using Dimapur sand) complete all as specified and as directed. |
| 12 | S&F 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed. |
| 13 | M&L for Reinforced cement concrete (nominal mix) Type B1 1:2:4 (using 20 mm graded aggregate) in Walls, foundation, basement walls, ballast walls and the like;any thickness; above top of footings; complete all as specified and directed |
| 14 | Use and waste of formwork to faces of walls, retaining walls, abutments, parapets and staircase railing and similar work including attached pillasters, buttresses, etc vertical or to better complete all as specified and directed |
| 15 | M&L for Reinforced cement concrete (nominal mix) Type B1 1:2:4 (using 20 mm graded aggregate) Columns, pillars, piers, posts and struts complete all as specified and as directed. |
| 16 | M&L for formwork to side of pillars, posts, struts, piers, columns and stanchions for square, rectangular fair finished surfaces complete all as specified and as directed. |
| 17 | M & L for reinforcement TMT bars 10mm dia and over cut to length, bent to shape reqd including cranking bending and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 18 | M&L for PCC 1:3:6 type C2 (using 40mm graded aggregate) 75mm thick as in sub basse complete all as specified and as directed. |
| 19 | Dismantling floor, hearth, granite, chequred tiles, interlocking tiles tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 20 | M & L for Machine pressed precast concrete interlocking paver block rubber moulded any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and directed by Engr-in-Charge |
| 21 | Supply and laying fine aggrigate(sand) for filling under floors ccomplete all as specified and as directed. |
| 22 | M&L for chequered cement concrete tiles 30cm x 30cm x 25mm thick set jointed with grey cement and pigments and pointed in neat cement slurry in floors including 15 mm thick sreed bed in CM 1:4 complete all as specified and as directed. |
| 23 | M&L for precast RCC 1:2:4 type B 1 as in cover slab for manhole cover etc with plane faces complete all as specified and directed by Engineer-in-Charge. |
| 24 | M&L for 100 mm thick plain cement concrete type B 2, 1:2:4 (using 40mm graded stone aggregate) as in flooring and finishing the cement concrete surface even and smooth without using extra cement complete all as specified and as directed. |
| 25 | M&L for Forming Contraction (Dummy) joints 65mm deep x 10mm wide,filled with sealing compound, bitumen mastic complete all as specified and as directed. |
| 26 | M&L fro Forming Construction joint 30mm deep x 10mm wide filled with sealing compound, bitumen mastic complete all as specified and as directed. |
| 27 | M&L fro Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe 410 -W(Gde E- 250) quality A complete all as specified and as directed. |
| 28 | M&L for providing and laying at or near ground level factory made kerb stone of nominal mix (1:1.5:3) cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and as directed. |
| 29 | M&L for Preparation of old surfaces of concrete any description over 10cm girth or width, not otherwise described apply one coat of synthetic enamel paint complete all as specified and as directed. |
| 30 | M&L for preparing of new steel surfaces and applying two coat of sythetic enamel paint over one coat of red oxide any description ,over 10cm in width or girth not otherwise described complete all as specified and as directed. |
| 31 | M&L for Preparation of newly plastered surfaces of walls and applying two coats of cement base paint complete all as specified and as directed.Note : Rates deemed to be inclusive of scaffolding upto height 12 Mtr at reqd places. No additional payment will be made on this account |
| 32 | Dismantling fencing wire mesh chain link fencing etc, any type complete all as specified and as directed. |
| 33 | Supply only Chain link MS galvanised fencing, any size or type complete all as specified and directed |
| 34 | M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like including 20mm thick screed bed in cement mortar (1:4), pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed. |
| 35 | S&F angle iron (Fe-310) as in posts, struts in fencing, gate including cutting top to shape required, drilling holes, notching for wire etc complete all as specified and as directed. |
| 36 | M & L for hardcore of broken stone or boulders n exc. 63mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and remmed to a true surface, complete all as specified and as directed. |
| 37 | M&L for plain cement concrete Type C2 1:3:6 (using 40mm graded aggregate) in foundations, filling and mass concrete complete all as specified and as directed. |
| 38 | M&L for Cement concrete in surface channels and drains type B2 1:2:4 (using 40 mm graded stone aggregate) complete all as specified and as directed. |
| 39 | S & F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S 1161-1979 grade St-240 complete all as specified and as directed. |
| 40 | M&L for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysDec 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender