Defence Statutory Bodies & Commissions/Committees Closing in 16 days TDR #58602965

Tender For Repair / Maintenance To Pump Sets, Lt Panel Boards, Starters At Ao Ph, Mithun Ph, R1, R2, R3, R4, R9, R12/13, R28 Pump House Area Including Glow Sign Boards, Gate Lights And Connected Items Under Ge (Nw) Navy Nagar, Colaba, Mumbai

Issued by Statutory Bodies & Commissions/Committees · Mumbai, Maharashtra
Tender Value
49 Lakhs
Estimated cost
Bid Submission
08 Dec 2026
16 days left
EMD
98000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Mumbai → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Repair / Maintenance To Pump Sets, Lt Panel Boards, Starters At Ao Ph, Mithun Ph, R1, R2, R3, R4, R9, R12/13, R28 Pump House Area Including Glow Sign Boards, Gate Lights And Connected Items Under Ge (Nw) Navy Nagar, Colaba, Mumbai

BOQ

Name of Work:- REPAIR / MAINTENANCE TO PUMP SETS, LT PANEL BOARDS, STARTERS AT AO PH, MITHUN PH, R1, R2, R3, R4, R9, R12/13, R28 PUMP HOUSE AREA INCLUDING GLOW SIGN BOARDS, GATE LIGHTS AND CONNECTED ITEMS UNDER GE (NW) NAVY NAGAR, COLABA, MUMBAI
Sl. No. Item Description
1M& L for Disconnecting pump from motor of any Make, model and remove Bearing using bearing puller gear and fix new all two bearings at DE/NDE mathcing with existing bearing model and number for pump including necessary greasing, check for proper shaft alignments, vibration pads, such that no vibratiobn produce during opertion of following capacity Motors.
2Bearings suitable for Pump coupled with 200 HP motor
3Bearings suitable for Pump coupled with 150 HP motor
4Bearings suitable for Pump coupled with 120 HP motor
5Bearings suitable for Pump coupled with 75 HP motor
6Bearings suitable for Pump coupled with 60 HP motor
7Bearings suitable for Pump coupled with 40/50 HP motor
8Bearings suitable for Pump coupled with 30 HP motor
9Bearings suitable for Pump coupled with 20/25 HP motor
10Bearings suitable for Pump coupled with 15 HP motor
11Bearings suitable for Pump coupled with 10/7.5 HP motor
12M& L for Disconnecting motor from pump of any Make, model and remove Bearing using bearing puller gear and fix new all two bearings at DE/NDE mathcing with existing bearing model and number for motor including necessary greasing, check for proper shaft alignments, vibration pads, such that no vibratiobn produce during opertion of following capacity Motors.
13Bearings suitable for motor coupled with 200 HP pump
14Bearings suitable for motor coupled with 150 HP pump
15Bearings suitable for motor coupled with 120 HP pump
16Bearings suitable for motor coupled with 75 HP pump
17Bearings suitable for motor coupled with 60 HP pump
18Bearings suitable for motor coupled with 40/50 HP pump
19Bearings suitable for motor coupled with 30 HP pump
20Bearings suitable for motor coupled with 20/25 HP pump
21Bearings suitable for motor coupled with 15 HP pump
22Bearings suitable for motor coupled with 10/7.5 HP pump
23M&L for Disconnecting motor power cables of various sizes from electrical motor of different capacities and decoupling from the pump sets, removing and taking down carefully and transporting to authorised workshop, Dismantaling stator and rotor carefully and rewinding stator assembly with supper enamelled copper winding wire of suitable gauge matching to existing gauge and cleaning of slots, core with carbon tetra chloride solution and apply two coats of insulation varnish and keep stator assembly in heating chamber to improve insulation strength, reassemble motor completey and transporation to site, coupling pump to motor and check for proper shaft alignments such that no vibratiobn produce during opertioncoupling to pump with exact allinment, connect power cables to motor and testing of following capacity motor.
24200 HP
25150 HP
26120 HP
2775 HP
2860 HP
2940/45 HP
3015/20 HP
315/7.5 HP
32Supply and fixing in repairs MS ERW pipe heavy grade, ISI marked for suction and deliver for pump including necessary fittings, flanges, welding, and providing necessary PCC support, pipe may lay in trenches or fixed on wall, make a arrangement to frame the pipe in shape as requred on site by cutting and welding in peases painting with one coat of red oxide primer & two coat of synthetic enamel paint all as specfied and directed by Engineer-in-charge of following sizes :-
33300 mm dia
34200 mm dia
35250 mm dia
36150 mm dia
37100 mm dia
3880 mm dia
39M& L for Disconnecting centrifugal pump from motor, suction and delivery pipe line of any Make, model and taking down packing for removing and insertion of new shaft sleeves or remove Bearings using bearing puller gear and fix new shaft sleeves including necessary greasing of all parts, coupling pump to motor and check for proper shaft alignments such that no vibratiobn produce during opertion of following capacity pumps complete all as specfied and directed by Engineer-in-charge.
40Shaft sleeves coupled with 200 HP pump/motor
41Shaft sleeves coupled with 150 HP pump/motor
42Shaft sleeves coupled with 75 HP pump/motor
43Shaft sleeves coupled with 60 HP pump/motor
44Shaft sleeves coupled with 40/45 HP pump/motor
45Shaft sleeves coupled with 20 HP pump/motor
46Shaft sleeves coupled with 15 HP pump/motor
47Supplying and laying or passing through pipe, 1100 volts grade heavy duty carpet grade cable with XLPE insulated aluminium stranded conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheather 300 Sq mm nominal cross sectional area 3½ core, laid in trenches and pipes, clamp on wall and pole, making good distrubed surface as existing surface complete all as specified and as directed by the Engineer-in-Charge.
48Supply and fixing in repair HDPE Pipe of size 150 mm bore, PN 10 including jointing with collars/bends complete all as specified and directed.
49Supply and fixing in repair HDPE Pipe of size 50 mm bore, PN 10 including jointing with collars/bends complete all as specified and directed.
50Supply and fixing in repair only AC-3 type contactor with control voltage of 415V, AC, 50Hz with integrated auxillary or Add on block contacts with 1 or 2 No and NC including connection of control wiring to contactor and testing of starter after repairing .
51Contactor 225–250 A motor current, use a 250 A AC-3 contactor, provided the manufacturer's AC-3 rating at 415 V is ≥ the motor's full-load current suitable for 200HP
52Contactor 170–185 A motor current, use a 185 A AC-3 contactor, provided the manufacturer's AC-3 rating at 415 V is ≥ the motor's full-load current suitable for 150HP
53Contactor 135–150 A motor current, use a 150 A AC-3 contactor, provided the manufacturer's AC-3 rating at 415 V is ≥ the motor's full-load current suitable for 120HP
54Contactor 85–95 A motor current, use a 95 A AC-3 contactor, provided the manufacturer's AC-3 rating at 415 V is ≥ the motor's full-load current suitable for 75HP
55Contactor 45–50 A motor current, use a 50 A AC-3 contactor, provided the manufacturer's AC-3 rating at 415 V is ≥ the motor's full-load current suitable for 40HP
56Contactor 28–32 A motor current, use a 32 A AC-3 contactor, provided the manufacturer's AC-3 rating at 415 V is ≥ the motor's full-load current suitable for 25HP
57Contactor 22–25 A motor current, use a 25 A AC-3 contactor, provided the manufacturer's AC-3 rating at 415 V is ≥ the motor's full-load current suitable for 20HP
58Contactor 17–20 A motor current, use a 20 A AC-3 contactor, provided the manufacturer's AC-3 rating at 415 V is ≥ the motor's full-load current suitable for 15HP
59Supply and fixing in repair thermal over load relay with adjustable setting with integrated auxillary or Add on block contacts with 1 or 2 NO and NC including connection of control wiring to OLR and testing of starter after repairing .
60OLR of capacity I Min of 135 to I max 225 A with CT Make: L&T/Havells/C&S/Legrand or equivalent of approved make.
61OLR of capacity I Min of 90 to I max 150A Make: L&T/Havells/C&S/Legrand or equivalent of approved make.
62OLR of capacity I Min of 60 to I max 100A Make: L&T/Havells/C&S/Legrand or equivalent of approved make.
63OLR of capacity I Min of 42 to I max 70A Make: L&T/Havells/C&S/Legrand or equivalent of approved make.
64OLR of capacity I Min of 28 to I max 46.5A Make: L&T/Havells/C&S/Legrand
65Supply, installation, testing and commissioning of LT Panel board indoor type in repair wit IP54 Protection panel manufacturer made out of of 2mm CRCA sheet cubical totally enclosed with frame made out of 50mm x 50mm x 6mm angle iron door front and back openable with locking arrangement indoor type vermin and weather proof floor mounting type, suitable for 3 phase 4 wire, 50 HZ, 415 Volt AC supply with 600A of high conductvityelectrolytic copper bus bar (4 Nos) All MCCB shall be connected with suitable size of copper strip from main bus & with terminate point, with adequately supported with high-quality SMC/DMC insulators. Suitable shrouding/barriers to prevent accidental contact. Earth busbar throughout the panel. and complete wiring of panel board with suitable size PVC insulated multistranded copper conductor including lugs/thimbles etc with suitable cable alley for provn of cable entries at bottom with cable glands including the following :-(a) MCCB 4 pole, 415V, AC, 400 Amps 50 KA - 02 No (incoming) (Main+DG) thermo magnetic adjustable release type,ICS=ICU=100% (b) MCCB 3 pole, 415V, AC, 100 Amps 36 KA - 05 Nos (4 Nos for starter 40 HP + 01 Standby) thermo magnetic adjustable release type, ICS=ICU=100% Make: L&T/ABB/Siemens/legrand/IndoAsian/Havells/ HPL/ Schneider/ Standard(c) Automatic star/Delta starters with all accessories mounting suitable for 40 HP-04 Nos. (d) On load Change over Switch 400A, 415V, AC, 50Hz, 3 terminal - 01 No(e) Single phase preventor for for each motor(f) Overload protection for each motor(g) Phase failure protection and Phase sequence protection.
66(h) Short-circuit protection through MCCBs.(j) Emergency stop provision(k) Motor ON/OFF/TRIP indication.(l) Individual motor run-hour indication(m) Auto/Manual operation facility.(n) Interlocking provision between pumps, (o) Provision for remote/SCADA start-stop and status feedbackNote:- Size of the planel (LxBxH) shall be match with existing panel installed at installation
67Supply, installation, testing and commissioning of LT Panel board indoor type in repair wit IP54 Protection panel manufacturer made out of of 2mm CRCA sheet cubical totally enclosed with frame made out of 50mm x 50mm x 6mm angle iron door front and back openable with locking arrangement indoor type vermin and weather proof floor mounting type, suitable for 3 phase 4 wire, 50 HZ, 415 Volt AC supply with 800A of high conductvityelectrolytic copper bus bar (4 Nos) All MCCB shall be connected with suitable size of copper strip from main bus & with terminate point, with adequately supported with high-quality SMC/DMC insulators. Suitable shrouding/barriers to prevent accidental contact. Earth busbar throughout the panel. and complete wiring of panel board with suitable size PVC insulated multistranded copper conductor including lugs/thimbles etc with suitable cable alley for provn of cable entries at bottom with cable glands including the following :-(a) MCCB 4 pole, 415V, AC, 630 Amps 50 KA - 01 No (incoming) thermo magnetic adjustable release type,ICS=ICU=100% (b) MCCB 3 pole, 415V, AC, 400 Amps 36 KA - 03 Nos (3 Nos for starter 150 HP ) thermo magnetic adjustable release type, ICS=ICU=100% Make: L&T/ABB/Siemens/legrand/IndoAsian/Havells/ HPL/ Schneider/ Standard/C&S(c) Automatic star/Delta starters with all accessories mounting suitable for 150 HP-03 Nos. (d) Single phase preventor for for each motor(e) Overload protection for each motor(f) Phase failure protection and Phase sequence protection.
68(g) Short-circuit protection through MCCBs.(h) Emergency stop provision(j) Motor ON/OFF/TRIP indication.(k) Individual motor run-hour indication(l) Auto/Manual operation facility.(m) Interlocking provision between pumps, Note:- Size of the planel (LxBxH) shall be match with existing panel installed at installation Please Enable Macros to View BoQ information
69(g) Short-circuit protection through MCCBs.(h) Emergency stop provision(j) Motor ON/OFF/TRIP indication.(k) Individual motor run-hour indication(l) Auto/Manual operation facility.(m) Interlocking provision between pumps, Note:- Size of the planel (LxBxH) shall be match with existing panel installed at installation Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58602965
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 49 Lakhs
LAST DATE 08-12-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Repair / Maintenance To Pump Sets, Lt Panel Boards, Starters At Ao Ph, Mithun Ph, R1, R2, R3, R4, R9, R12/13, R28 Pump House Area Including Glow Sign Boards, Gate Lights And Connected Items Under Ge (Nw) Navy Nagar, Colaba, Mumbai
Basic Detail
Tender No 8732/E8
Bidding Type Tender
Location
City Mumbai
State Maharashtra
Key Dates
Publish Date 18 Nov 2026
Submission Date 08 Dec 2026
Open Date 10 Dec 2026
Finance
Tender Value 49 Lakhs
Tender Fee 500
EMD 98000
Exemption Not Available
Document List
7cb81431-46fb-4490-990e-e8f565b46fe6.html
BOQ_896901.xls
TENDERDOCUMENT.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 18, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 08, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 16 days
Dec 10, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 18 days

Tender Documents

Download All (ZIP) ↓
html

7cb81431-46fb-4490-990e-e8f565b46fe6.html

xls

BOQ_896901.xls

pdf

TENDERDOCUMENT.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender