Tender For Repair Maintenance Of Internal Wiring Light Fitting With Other Internal Electrification Items At Otm Accn New Cantt And Burdong Under Ge Gangtok
Tender Value
20 Lakhs
Estimated cost
Bid Submission
09 Dec 2026
17 days left
EMD
40000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
sikkim → Sikkim
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair Maintenance Of Internal Wiring Light Fitting With Other Internal Electrification Items At Otm Accn New Cantt And Burdong Under Ge Gangtok
BOQ
| Sl. No. | Item Description |
| 1 | Taking down carefully copper/ aluminium point wiring for light, fan, socket or power point complete with fittings such as switches, fan regulators, light fittings, tube light fittings, bracket light fittings and ceilling rose, holders and including making good the disturbed surface on walls, complete all as directed. |
| 2 | M&L for point wiring with PVC insulated unsheathed multi stranded copper conductor cable, 1100 volt, FRLSH grade of size 1.5 Sqmm drawn through and including surface PVC casing & caping (ISI Marked) with accessories including PVC sunken box and hylem sheet/PVC Box including 1.5 sqmm FRLSH copper conductor cable for earth continuty green in colour for one light point/fan point/Bell point controlled by one 5/6 Amps one way switch complete all as specified and as directed by Engr-in-charge. Note:-(i) All the disturbed surfaces of wall / ceiling shall be made good to match the existing wall / ceiling finishes and as directed by the Engineer-in-Charge. |
| 3 | All as per item No 2.00 here in above but One 3 pin 5 amps switch socket outlet point on independent board. |
| 4 | All as per item No 2.00 here in above but one socket outlet, three pin, 5/6 Amp on the same board with other switch. |
| 5 | All as per item No 2.00 here inabove but for one light point controlled by two 5/6 Amps two way switch |
| 6 | All as per item No 2.00 here in above but for one 15/16Amp switch socket out let, independent board with 2.5 sqmm copper cable FRLSH grade of PVC insulated, unsheathed, multi stranded and 2.5 sqmm copper cable FRLSH grade for earth continuity conductor. |
| 7 | M&L for point wiring with PVC insulated unsheathed multi stranded copper conductor cable, 1100 volts, FRLSH grade of size 1.5 Sqmm drawn through existing concealed conduit with existing sunken box and hylem sheet/modular box including 1.5 sqmm FRLSH copper conductor cable for earth continuty green in colour for one light point/fan point/Bell point controlled by one 5/6 Amps one way switch, complete all as specified and as directed by Engr-in-charge. Note:-(i) All the disturbed surfaces of wall / ceiling shall be made good to match the existing wall / ceiling finishes complete all as specified and as directed by Engr-in-charge. |
| 8 | All as per item No 7.00 here in above but for One 3 pin 5 amps switch socket outlet point on independent board. |
| 9 | All as per item No 7.00 here in above but for one 15/16Amp switch socket out let, independent board with 2.5 sqmm copper cable FRLSH grade of PVC insulated, unsheathed, multi stranded and 2.5 sqmm copper cable FRLSH grade for earth continuity conductor. |
| 10 | S&F switch paino, flush type, single pole, one way, 5/6 Amp complete all as specified and directed. |
| 11 | S&F switch paino, flush type, single pole, two way, 5/6 Amp, complete all as specified. |
| 12 | S&F bell push, flush type, 5/6 Amp, 230 Volts complete all as specified & directed |
| 13 | S&F socket outlet 2 in 1, 5 pin 5/6 Amp, 230 volts complete all as specified and as directed. |
| 14 | S&F Switch socket combination 2 in 1, 3 pin, 5 Amps, flush type, universal, 230 volt, multipurpose two/four hole type complete all as specified and directed. |
| 15 | S&F Switch socket combination 2 in 1, 3 pin, 5 and 16Amp, flush type, universal, 230 volt, multipurpose four hole type complete all as specified and directed. |
| 16 | S&F in repair 15 Amp Switch single pole, batten/Porclean base complete all as specified and directed. |
| 17 | S&F in repairs Modular switch 1 way 6 A, 1 module 230 Volts, 50Hz, ISI marked complete all as specified and as directed. |
| 18 | S&F in repairs Modular Socket, 6A-2/3 pin combined 2 module 230 Volts, 50Hz, ISI marked complete all as specified and as directed. |
| 19 | S&F in repairs Modular bell push 6 A, 1 module 230 Volts, 50Hz, ISI marked complete all as specified and as directed. |
| 20 | S&F in repairs Modular switch 1 way 16 A,1 module 230 Volts,50Hz, ISI marked complete all as specified and as directed. |
| 21 | S&F Modular Socket, 6A/16A-2/3 pin combined 2 module 230 Volts,50Hz, ISI marked all as specified and as directed. |
| 22 | S&F bell electric Ding Dong type, AC 230 volts fixed complete all as specified & directed |
| 23 | S&F ceiling rose, surface Bakelite 65 x 30mm, three terminals, complete all as specified & directed |
| 24 | S&F in repairs of Modular AC Box unbreakable heavy duty with ISI plug top with protected type 2 pin and earth plug and complete socket with one MCB SP 240 volt, 20 Amps completeall as specified & directed. |
| 25 | S&F in repairs of 2 feet mirror light 10/12 W 3000k LED tubelight fitting with lamp thermal condutive material PC Diffuser, efficiency >100 lm/ W, glare free, THD<10%,Potted electronic driver connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed. |
| 26 | S&F LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size all as specified and directed. |
| 27 | S&F in repairs of 4 feet 20 W LED tubelight fitting with lamp,Extruded aluminium, PC Diffuser, efficiency >125 lm/ W, glare free, THD<10%,Potted electronic driver connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed. |
| 28 | S&F in repairs aesthetically designed 2X2 LED flat panel for ceiling mounting which provides soft light and glare free illumination not less than 36 watt,efficiency >125 lm/ W, including and connecting up all as specified and as directed. |
| 29 | Supply and fix in replacement of 20 W Inverter LED tubelight fitting with backup time upto 4 hours, PC Diffuser, efficiency >125 lm/ W, glare free, THD<10%,Potted electronic driver connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed. |
| 30 | S&F in repairs round/square shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size as per site requirement complete all as specified and as directed. |
| 31 | S&F in repairs round/square shape 15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size as per site requirement complete all as specified and as directed. |
| 32 | S&F in repairs round shape 18 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size as per site requirement complete all as specified and as directed. |
| 33 | S&F in repairs of Factory made sheet metal enclosure for DBs double door (Fixed flush to the wall), SPN, 240 volt, 8 Way, IP-43, IK-09 protection with mod insulated rated bus bar and 2.5 Sq. mm copper PVC sheathed cable for earth continuity and suitable for having MCB’s complete all as specified and as directed. |
| 34 | S&F in repairs of Factory made sheet metal enclosure for DBs single door (Fixed flush to the wall), SPN, 240 volt, 4 Way, IP-43, IK-09 protection with Mod insulated rated bus bar and 2.5 Sq. mm copper PVC sheathed cable for earth continuity and suitable for having MCB’s complete all as specified and directed. |
| 35 | S&F in repairs of Factory made sheet metal enclosure for DBs double door (Fixed flush to the wall), TPN, 415 volt, 4 Way, IP-43, IK-09 protection with mod insulated rated bus bar and 4.0 Sq. mm copper PVC sheathed cable for earth continuity and suitable for having MCB’s complete all as specified and directed. . |
| 36 | S&F in repairs MCB 6 to 32Amp, 240 Volt, SP, breaking capacity 10 KA 'C' series, as complete all as specified and directed. |
| 37 | S&F in repairs of MCB 32 Amp, 240 Volt, SPN, breaking capacity 10 KA 'C' series complete all as specified and directed. |
| 38 | S&F in repairs of MCB 40Amp, 415 Volt, TPN, breaking capacity 10 KA 'C' series complete all as specified and directed. |
| 39 | Taking down un-serviceable sub main wiring of any type and any size and further disposal including making good the disturbed surface and matching the colour of wall with the existing colour of the wall with wash/paint/distemper whenever required (as per the existing condition) complete all as specified and directed. |
| 40 | S&F sub main wiring with two run of 4.0 Sq. mm PVC sheathed, copper conductor cable, 1100 Volt, FRLSH grade and one run of copper earth wire 4.0 Sq mm drawn through PVC casing and caping or rigid PVC conduit , complete all as specified. Note : Copper conductor 2 run and one run of copper earth wire along with PVC casing and caping or rigid PVC conduit shall be measured as one length. |
| 41 | S&F of sub main wiring with two run of 6.0 Sq. mm PVC sheathed, copper conductor cable, 1100 Volt, FRLSH grade and one run of copper earth wire 6.0 Sq mm drawn through PVC casing and caping or rigid PVC conduit, complete all as specified. Note : Copper conductor 2 run and one run of copper earth wire along with PVC casing and caping or PVC conduit shall be measured as one length. |
| 42 | S&F in repairs of LED Bldg security light 30W,>110 Lm/watt,IP-66 protection made up of pressure die cast aluminium housing with high power LED as lighting source and lens embeded cover toughned glass having top opening separate driver compartment with IP 66 protection with inbuilt surge protector and impact resistance of IK07 complete all as specified and directed by Engineer-in-charge. |
| 43 | S&F in repairs PVC rectangular block for mounting, switches, sockets, fan regurators etc with 3 mm thick plastic laminated sheet cover of size 100mmX100mm and 50 mm deep, Complete all as specified |
| 44 | S&F in repairs PVC rectangular block for mounting, switches, sockets, fan regurators etc with 3 mm thick plastic laminated sheet cover of size 175mmX100mm and 50 mm deep, Complete all as specified |
| 45 | S&F in repairs LED retrofit lamp B22 holder base with polycarbonate body and aluminium heat sink of 09 Watt complete all as specified and as directed. |
| 46 | S&F in repairs angle holder for LED bulb of any type complete all as specified and as directed. |
| 47 | S&F in repairs Bldg security light bracket fabricated from 32mm dia medium grade GI pipe bent to shape not exceeding 1.5mtr long alongwith 2 Nos clamps of size 32x6mm flat iron and including nuts, bolts, washers suitable for fixing on Buildings including 2 coats of synethic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 48 | Taking down the Exhaust fan/wall mounting fan heavy duty of 300/250/ 200 mm sweep by disconnecting from the ceiling rose, carrying out necessay repair such as repairs of capacitor/ bearings/ flexible copper cable of suitable size including overhauling by carrying out repair such as applying grease to metal parts, rewinding of burnt coil and repairs of suitable size cotter/split pin as required, reassembling and refixing in original position, fixing of louvers/wire mesh commissioning, testing complete all as specified and directed by Engr-in-Charge. Notes :- (a) Spares shall be replaced and measured and paid seperately under relevent items of schedule.(b) Rate deemed to be inclusive of new flexible copper wire between ceiling rose to fan connector no extra claim what so ever will be entertained by the department. |
| 49 | S&F in repair exhaust fan capacitor 4 mfd of approved make complete all as directed by Engineer-in-Charge. MAKE : Havells Cat Part No - QHPCWC5004X0 or equivalent in NICCO/Universal/sarada |
| 50 | M&L for spray painting with white synthetic enameled paint after preparation of old surface of the exhaust fan of any make/model/sweep, including filling cavities with filler after cleaning dust complete all as specified and as directed.Make : Berger/Asian/ Jenson & Nocholson |
| 51 | S&F in repairs of new ball bearing 6201 / 6202 / 6203 including metal filling, machining if required, complete all as specified. Make : SKF/NBC |
| 52 | Taking down the storage type water heater of any type & size, by disconnecting electric connection, carrying out necessary repair such as cleaning of inner water tank, removing scales,connecting flexible three core copper cable of size 2.5 sqmm and re - fixing in original position, grouting, testing and commissioning, complete all as directed. Notes : (i) spares replaced shall be measured and paid seperately under supply onlyunder relevant item of this schedule. |
| 53 | S&F in repairs indicating lamp for geyser, including dismantling the existing u/s element, complete all as specified. |
| 54 | S&F in repairs 3 pin plug top of 15 Amp, complete all as specified and directed by Engineer-in-Charge. |
| 55 | S&F in repairs heating element 2000 Watt capacity, 230 Volts, round / triangle base suitable for existing water heater of 50 litre capacity complete all as specified and as directed. |
| 56 | S&F in repairs heating element 1500 Watt capacity, 230 Volts, round / triangle base suitable for existing water heater of 25 litre capacity complete all as specified and as directed. |
| 57 | S&F in repairs 15mm dia PVC flexible connections (heavy duty) with two Nos brass nuts with washer at both ends of 450mm long, in repair, complete all as specified and as directed. |
| 58 | S&F in repairs GI pipe medium grade of 15mm dia with all fittings such as bends, elbow, tees, short pieces, connector , back-nuts, diminishing pieces, caps, plugs and unions, etc. complete all as specified and as directed. |
| 59 | S&F in repairs stop valves of 15mm size, cast copper alloy, screwed down, high pressure with crunch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed. |
| 60 | S&F in repairs of Thermostat of capacity 1500/2000Watt for geyser of any capacity complete all as specified and as directed. |
| 61 | S& F in repairs of geyser inner tank of 25 Ltr capacity complete all as specified and as directed. |
| 62 | S& F in repairs of geyser inner tank of 50 Ltr capacity complete all as specified and as directed. |
| 63 | M&L for earthing complete with galvanised steel earth plate electrode of size 600 x 600 x 6 mm thick, burried directly in ground (earth pit not less than 2.25 m below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanised wire of dia 4 mm as earthing lead by means of nuts, bolts and washers of galvanised iron and earth lead protected by galvanised iron pipe 15 mm bore (light grade) and connected to earth test point and including cement concrete pit in PCC (1:3:6) type C-1(using 20 mm graded aggregate) and pre-cast RCC cover slab of size 540 x 540 x 50 mm thick, reinforced with 8 mm dia TMT bars both ways and one handle for lifting made with 10 mm dia mild steel bar,funnel, wire mesh 20 mm bore galvanised (light grade) for watering, charcoal and salt in alternate layers including necessary execuation and eath works in any types of soil complete all as shown on Electrical plate No 3 of MES SSR-I including taking out the old earthing material complete all as specified and directed. |
| 64 | S&F in repairs PVC rigid, casing capping of width 20 mm and height 12 mm incl all accessories made out of high quality PVC impact resistance and non-conductive white or ivory double lock mechanism type fixed on wall incl necessary rawl plugs, screws and other associcated accessories complete all as specified and as directed. |
| 65 | S&F in repairs Rigid non-metallic PVC conduit 20 mm dia exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. complete all as specified and as directed. |
| 66 | S&F in repairs PVC insulated unsheathed multi stranded copper conductor cable (colour as specified at site), 1100 volt, FRLSH grade of size 1.5 Sqmm upto 1100 Volts, Conforms to IS 694 (Cable), IS 8130 (Conductor), IS 5831 (Insulation) complete all as specified and as directed. |
| 67 | S&F in repairs PVC insulated unsheathed multi stranded copper conductor cable (colour as specified at site), 1100 volt, FRLSH grade of size 2.5 Sqmm upto 1100 Volts, Conforms to IS 694 (Cable), IS 8130 (Conductor), IS 5831 (Insulation) complete all as specified and as directed. |
| 68 | S&F in repair switch paino, flush type, single pole, one way, 5/6 Amp, complete all as specified & directed |
| 69 | S&F in repair bell push, 5 Amp, 230Volt, complete all as specified & directed |
| 70 | S&F in repair bell electric Ding Dong type, AC 230 volts fixed complete all as specified & directed |
| 71 | S&F in repair switch socket combination 2 pin & 3 pin 5 Amp, 230 volt, multipurpose, two/four hole complete all as specified and as directed. |
| 72 | S&F in repair switch socket combination 3 pin 5/16Amp, 230 volt, multipurpose, 4 screws complete all as specified and as directed. |
| 73 | S&F in repair socket 2 pin & 5 pin 5 Amp, 230 volt, complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysDec 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender