Tender For Development Of The Road From Davangeri-Satenahalli State Highway No. 233 Road Km 89.80 To 91.32 In Hirekerur Taluk Of Haveri District. (From Shankara Rao Circle To Sarvajna Circle Within Hirekerur Town Limits) (Job No Crif-Knt-2025-26-235)
Tender Overview
Project Description
Tender for Development Of The Road From Davangeri-Satenahalli State Highway No. 233 Road Km 89.80 To 91.32 In Hirekerur Taluk Of Haveri District. (From Shankara Rao Circle To Sarvajna Circle Within Hirekerur Town Limits) (Job No Crif-Knt-2025-26-235)
BOQ
| Sl. No. | Item Description |
| 1 | Providing and applying tack coat with VG 10 grade bitumen using bitumen pressure distributor at the rate of 0.30 kg per sqm on the cement concrete surface cleaned with mechanical broom & dusting by air compressor and spraying including cost of all materials, labour, usage charges of all machinery, loading & unloading etc., complete, with all lead and lifts and all labour, hire charges of all machineries and transpotation charges of all machineries and inclusive of all incidential charges etc., complete. as per specifications & and as per the directions of Engineer-in-charge |
| 2 | Providing and applying tack coat with VG 10 grade bitumen using bitumen pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous surface cleaned with mechanical broom & dusting by air compressor and spraying including cost of all materials, labour, usage charges of all machinery, loading & unloading etc., complete, with all lead and lifts and all labour, hire charges of all machineries and transpotation charges of all machineries and inclusive of all incidential charges etc., complete. as per specifications & and as per the directions of Engineer-in-charge |
| 3 | Providing and laying dense graded bituminous macadam with higher capacity batch type HMP using crushed aggregates as per table 500-7 of specified grading premixed with bituminous binder VG-30 paving bitumen as per clause 504.3.1 complying with IS-73-2013 of specified grading, premixed with bituminous binder at 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects including cost of all materials all labour, usage charges of all machinery all lead, lifts, loading, unloading stacking transporting etc., complete, primer/ tack coat- 50-75 mm compacted thickness. with all lead and lifts and all labour, hire charges of all machineries and transpotation charges of all machineries and inclusive of all incidential charges etc., complete. as per specifications & and as per the directions of Engineer-in-charge |
| 4 | Providing and laying bituminous concrete with higher capacity batch type hot mix plant using crushed aggregates as per table 500-7 of specified grading premixed with bituminous binder VG-30 paving bitumen as per clause 504.3.1 complying with IS-73-2013 of specified grading, premixed with bituminous binder @ 5.4 per cent of mix and filler @2% by weight of agregate, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects including cost of all materials all labour, usage charges of all machinery all lead, lifts, loading, unloading stacking transporting etc., complete,cost of primer/ tack coat - 30-40 mm compacted thickness. Grading - II.with all lead and lifts and all labour, hire charges of all machineries and transpotation charges of all machineries and inclusive of all incidential charges etc., complete. as per specifications & and as per the directions of Engineer-in-charge |
| 5 | Direction and Place Identification Signs upto 0.9 sqm Size Board. Providing and erecting direction and place identification retro-reflectorised sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick or Aluminum composite material sheet with overall thickness of 4mm with area not exceeding 0.9 sqm fixed over back support frame of min 35 x 35 x 3mm Angle mounted on a mild steel circular pipe 65 NB 3.20 mm thick, 3.60mtrs hight, firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 x 45 x 60 cm, 60 cm below ground level as per approved drawing, including curing, cost of all materials all labour, lead, lifts, loading, unloading transporting etc., complete.with all lead and lifts and all labour, hire charges of all machineries and transpotation charges of all machineries and inclusive of all incidential charges etc., complete. as per specifications & and as per the directions of Engineer-in-charge |
| 6 | Retro-Reflectorised Traffic Signs.Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of Class-B Type IV retro reflective sheeting fixed over 2 mm thick aluminium sheeting vide clause 801.3, 4mm thick Aluminium composite material sheet including lettering depending on the size of the sign fixed over back support frame of min 25 x 25 x 3mm Angle mounted on a mild steel circular pipe 65 NB 3.60mtrs high (min effective height 1.90 mtrs), 3.2 mm thickness firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. The sign shall be maintained as per section 12 of IRC 67, as per clauses including curing, cost of all materials all labour, lead, lifts, loading, unloading transporting etc., complete.with all lead and lifts and all labour, hire charges of all machineries and transpotation charges of all machineries and inclusive of all incidential charges etc., complete. as per specifications & and as per the directions of Engineer-in-charge |
| 7 | Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface. Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads at 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes, including, barricading, traffic diversion as per IRC-35, cleaning the surface of dirt, dust and other foriegn matter, demarcation at site, traffuc control,cost of all materials all labour, lead, lifts, loading, unloading transporting etc., complete.with all lead and lifts and all labour, hire charges of all machineries and transpotation charges of all machineries and inclusive of all incidential charges etc., complete. as per specifications & and as per the directions of Engineer-in-charge |
| 8 | Supplying and Fixing of Molded Shank Raised PavementMarkers / Cat's Eye made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total internal flection of the light entering the lens face and shall support a load of 16000 kg tested in accordance to ASTM D 4280 Type H and complying to Specifications ofCategory A of MORTH Circular No RW/NH/33023/10-97DO III Dt 11.06. 1997. The height, width and length shall not exceed 50 mm, 100 mm and 102 +/- 2 mm and with minimum reflective area of 13 cm2 on each side and the slope to the base shall be 35 +/- 5 degree. The strength of detachment of the integrated cylindrical shanks, (of diameter not less than 19 +/- 2 mm and height not less than 30+/- 2 mm) from the body is to be a minimum value of 500 Kg. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer's recommendation and complete as directed by the engineer.The contractor shall submit a two year warranty for satisfactory field performance including stipulated retro-reflectance of the reflecting panel, to the Engineer.with all lead and lifts and all labour, hire charges of all machineries and transpotation charges of all machineries and inclusive of all incidential charges etc., complete. as per specifications & and as per the directions of Engineer-in-charge |
| 9 | Network Survey Vehicle (NSV) attached with SUV Data collection of Longitudinal profiling (International roughness Index). Transverse profiling (Rut depth) Pavement texture in terms of Mean proffile depth, Road Geometry data, (Cross slope, gradient, curvature), GPS Coordinates (X, Y, Z) viz longitudinal, latitude & altitude, Video Imaging for Road side furnitures / Road assets and Video imaging for pavement surface Distress and reports.Note: (i) Average distance has been considered 300km for mobilisation at working site and same for demobilisation.(ii) Speed of vehicle 40km/hr, has been considered. (iii) The survey speed shall be within 30 to 80 kmph.including cost of all materials all labour, lead, lifts, loading, unloading transporting etc., complete.with all lead and lifts and all labour, hire charges of all machineries and transpotation charges of all machineries and inclusive of all incidential charges etc., complete. as per specifications & and as per the directions of Engineer-in-charge |
| 10 | Providing and erecting Project Display Board of size 1.80 verticalx1.60M Horizontal made of Cold Rolled Coil Sheet 16 Guage (1.6mm thickness) sheeting sthrenghtened by welding to MS angle of size 35x35x5mm iron framework on all sides, extra cross vertical angle fixed using nuts and bolts, base of the board shall be cleaned, applying red oxide and black paint by sprayer on both sides of the board and all MS iron frameworks, background of the facing side of the board painted in traffic yellow, project information written in English/Kannada/Hindi, painting letters and numerals in black, fixed on a mild steel angle iron post 75 mm x 75 mm x 6 mm, 2 Nos. firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level and the board 2.8M from ground level as per approved drawing including cost of all materials all labour, lead, lifts, loading, unloading transporting etc., complete. with all lead and lifts and all labour, hire charges of all machineries and transpotation charges of all machineries and inclusive of all incidential charges etc., complete. as per specifications & and as per the directions of Engineer-in-charge Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 29 daysBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 30 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender