Defence Government Departments Closing in 7 days TDR #58602688

Tender For Improvement Of Wet Canteen At Bsf Campus Yelanhanka Under Stc Bsf Bangalore.

Issued by Government Departments · Bengaluru Urban, Karnataka
Tender Value
4.99 Lakhs
Estimated cost
Bid Submission
27 Nov 2026
7 days left
EMD
9996
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Bengaluru Urban → Karnataka
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Improvement Of Wet Canteen At Bsf Campus Yelanhanka Under Stc Bsf Bangalore.

BOQ

Name of Work:- Improvement of wet canteen at BSF Campus Yelanhanka Under STC BSF Bangalore.
Sl. No. Item Description
1Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift upto1.5 m. All kinds of soil.
2Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand(zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
3Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III)derived from natural sources : 3 graded stone aggregate 20 mm nominal sizederived from natural sources).
4Centering and shuttering including strutting, propping etc. and removal of form for : Suspended floors, roofs, landings, balconies and access platform
5Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.
6Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand)
7Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size,approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble Area of slab over 0.50 sqm
8Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Glazed Vitrified tiles Matt/Antiskid finish of size Size of Tile 600 x 600 mm
9Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main \\"T\\" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross \\"T\\" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main \\"T\\" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross \\"T\\" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main \\"T\\" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. 12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16 mm thick fire retardant PVC film on the face side and 12 micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit.
1012 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand)
11Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work.
12Providing and fixing precoated galvanised steel sheet roofing accessories of total coated thickness 0.50 mm ( Base metal of minimum 0.45 mm ) with Zinc coating 120 gram per sqm as per IS: 277, in 240 MPA steel grade , 5-7 micron epoxy primer on both side of the sheet and polyester top coat 15-18 micron using self drilling/self tapping scerws complete : Profile Ridges ( 500-600 mm)
13Providing and fixing 19mm thick openable shutters cupboard with required size as per condition of site using 19 mm thick plywood for supporting and facing. Exposed surface of cupboard to be laminated with 1 mm thick premium make and approved quality veener lamination or equivalent of approved shade and pattern fixed with fevicol etc and all inside surfaces to be laminated with off white veener lamination of 1 mm thick (premium quality). Each cupboard to be provided with fittings and fixtures like 4 Nos SS CABINET (concealed) hinges for shutters, 2 Nos 100mm SS handles all as per directions of the Engineer-in-charge. (All plywood members to be used shall be of BWP grade of premium make and approved quality.) Note: Front surface area i.e., width x height shall only be measured for payment purpose. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58602688
AUTHORITY Government Departments
TENDER VALUE 4.99 Lakhs
LAST DATE 27-11-2026
Authority
Authority Name Border Security Force
Work Description Tender for Improvement Of Wet Canteen At Bsf Campus Yelanhanka Under Stc Bsf Bangalore.
Basic Detail
Tender No 17/STC/PF/2026-27
Bidding Type Tender
Location
City Bengaluru Urban
State Karnataka
Key Dates
Publish Date 18 Nov 2026
Submission Date 27 Nov 2026
Open Date 30 Nov 2026
Finance
Tender Value 4.99 Lakhs
Tender Fee Ref. Documents
EMD 9996
Exemption Not Available
Document List
55eb6477-4789-45b2-934f-978a85ad04f6.html
BOQ_982432.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 18, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 27, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 7 days
Nov 30, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 10 days

Tender Documents

Download All (ZIP) ↓
html

55eb6477-4789-45b2-934f-978a85ad04f6.html

xls

BOQ_982432.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender