Tender For Procurement Of Residual Hostel Furniture & Non-Medical Furniture For Redevelopment Of Scb Mch Cuttack, Phase-I
Tender Overview
Project Description
Tender for Procurement Of Residual Hostel Furniture & Non-Medical Furniture For Redevelopment Of Scb Mch Cuttack, Phase-I , Estimate For Residual Hostel Furniture , Tea Poy/Centre Table Overall Dimensions (W × D × H): 1200Mm × 600Mm × 450 Mm. Table Top: 18Mm Thick Bwp Plywood (Is 303 Bwp Grade 15 Yrs Warranty) With Hot Pressed 1Mm Decorative Laminate On Top And 0.7Mm White Laminate Underneath. Both Laminates Shall Be Factory Pressed And Bonded, And Conform To Is 2046. The Table Should Be Adequately Reinforced From The Underside Using Suitable Structural Members To Avoid Sagging. Pvc Edge Banding: Matching 2 Mm Thick Pvc Edge Banding On Exposed Tabletop Edges With Hot Pasted Edge Banding Machine. Corners Radiused, No Visible Glue Line. Leg: Sturdy, Stable Support Structure Made Of Seasoned Hardwood Or Teakwood 60Mm X 60Mm With Side Frame Of 70 Mm X 25 Mm. Polypropylene Buffers Fitted At Bottom Under Each Leg For Making The Floor Scratch Resistant. All Exposed Wood Surface Of The Table Will Be Pu Polish. Surface Quality: Smooth, Scratch-Resistant, Moisture-Resistant And Easy-To-Clean Finish, With No Sharp Edges Or Visible Manufacturing Defects. Workmanship: The Table Shall Be Rigid, Level, Stable And Free From Wobbling, Delamination And Loose Joints. Plywood : Archidply/ Century Ply/Green Ply. Laminates: Archidlam/ Century / Greenlam/ Merino Approval: Physical Samples Of Plywood, Laminate, Color And Finished Wood To Be Approved Before Production. , Study Table Overall Dimensions (W × D × H): 1200Mm × 600Mm × 750 Mm. Table Top: 38Mm Thick Table Top With18mm Thick Bwp Plywood (Is 303 Bwp Grade,15 Yrs Warranty). Modesty Panel On The Back Side With Size Of 1200 Mm X 600 Mm With 18Mm Thick Bwp Plywood. Desk Grommet On Top. The Table Should Be Adequately Reinforced From The Underside Using Suitable Structural Members To Avoid Sagging. Sides: Sturdy, Stable Support Structure Made Of 18Mm Thick Bwp Plywood. Polypropylene Buffers Fitted At Bottom Under Each Leg For Making The Floor Scratch Resistant. The Fitting Will Be Kd Fittings Format Like Minifix And Barrelnut. Laminates: Hot Pressed 1Mm Decorative Laminate On Top And Outer Surfaces And 0.7Mm White Laminate On Other Surfaces. Both Laminates Shall Be Factory Pressed And Bonded, And Conform To Is 2046. Pvc Edge Banding: Matching 2 Mm Thick Pvc Edge Banding On Exposed Tabletop Edges And All Other Surface Of Plywood Shall Have 0.8Mm Pvc Edge Banding. Edge Banding With Hot Pasted Edge Banding Machine. Corners Radiused, No Visible Glue Line. Surface Quality: Smooth, Scratch-Resistant, Moisture-Resistant And Easy-To-Clean Finish, With No Sharp Edges Or Visible Manufacturing Defects. Workmanship: The Table Shall Be Rigid, Level, Stable And Free From Wobbling, Delamination And Loose Joints. Plywood: Archidply/ Century Ply/Green Ply. Laminates: Archidlam/ Century / Greenlam/ Merino Approval: Physical Samples Of Plywood, Laminate, Color And Finished Wood To Be Approved Before Production. , 3 Seated Steel Chairs Size: 1800Mm(L)X 650Mm(D)X 950Mm(H), Seating Height 450Mm, Load Capacity- 150 Kg Per Seat. Require Compliance With Is 17632:2022 And Applicable Strength And Stability Tests. Seat Size: 500Mm Width X 450Mm Depth, Back Size: 500Mm Width X 500 Mm Height Main Frame: Rectangular Mild Steel (M.S.) Electric Resistance Welded (Erw) Tubes Of Nominal Size 80 × 40 Mm, Minimum Wall Thickness 2.0 Mm. Durable Powder-Coated Finish. Seat And Backrest Shell: Fabricated From Crca Steel Sheet Of Minimum Thickness 1.5 Mm, With Perforations And Formed Edges As Per The Approved Design. Powder Coated Finish. Side Bars: Solid Steel Sections Of The Approved Cross-Sectional Dimensions, With A Chrome-Plated Finish. Fluting, End Finishing And Compatible Plastic Inserts Shall Be Provided As Per The Approved Design. Assembly And Fasteners: The Seat Shells Shall Be Securely Fixed To The Brackets And Crossbeam Using M8 Bolts Or Equivalent Corrosion-Resistant Fasteners. The Number, Size And Arrangement Of Fasteners Shall Be As Per The Approved Manufacturers Assembly Drawing And Shall Ensure Adequate Rigidity And Stability Under Intended Service Conditions. Floor Protectors: Durable, Non-Marking Polypropylene Or Equivalent Buffers Shall Be Fitted To All Floor-Contact Points To Prevent Scratching And Damage To The Flooring. Workmanship And Finish: All Components Shall Be Free From Sharp Edges, Burrs, Cracks, Defective Welds And Visible Surface Defects. The Completed Chair Shall Be Stable, Rigid, Corrosion-Resistant And Suitable For Continuous Use. Approval And Testing: The Supplier Shall Submit Dimensional Drawings, Material Specifications And Finish Details For Approval. The Assembled Chair Shall Meet The Applicable Requirements For Structural Stability, Strength And Durability. The Product Should Be Corrosion Free. Gross Weight : 30 Kg Approx. , 4 Lined Steel Cushion Chair Supply & Installation Of 4 Leg Chair Supply And Installation Of Item Size Seat Assembly: The Seat Assembly Should Be Made Up Of 1.2 ±0.Lcm. Thick Hot-Pressed Plywood , Upholstered With Fabric Upholstery Covers And Moulded Polyurethane Foam. Seat Size: 47 .0 Cm. (W) X 48.0 Cm. (.D) Back Assembly: The Back Assembly. Should Be Made Of Powder Coated (Oft 40-60 Microns) Tubular Frame Of O 2.54 ±0.03Cm. X 0.2 ±0.016Cm.Thk. Ms Erw Tube Designed With Contoured Lumbar Support For Extra Comfort. The Back Should Be Upholstered Using Double Layer Spacer Mesh Fabric With High Tenacity Yarn. Back Size : 46.5 Cm. (W) X 60.5Cm. (H) High Resilience (Hr) Polyurethane Foam: The Hr Polyurethane Foam Should Be Moulded With Density =45+/-2 Kg/M3 And Hardness Load 16 ± 2 Kgf For 25% Compression. Armrests: The One-Piece Armrests Should Be Injection Moulded From Black Co-Polymer Polypropylene. Tubular Frame: The Powder Coated (Oft 40-60.Microns) Tubular Frame Should Be Cantilever Type & Made Of (62.54 ±0.03Cm. X 0.2 ±0.016Cm Thick M.S.E.R.W. Tube. The Chair Seat Should Be Provided In 2 Colours (Red & Blue) Approved Make: Godrej/ Geeken/ Featherlite/ Herman Miller/ Steelcase , Computer Table 3X2 Overall Dimensions (W × D × H): 900 × 600 × 750 Mm. One Drawer With Open Storage For Cpu, 1 Small Drawer And Key Board Tray With Telescopic Channel. Table Top: 38Mm Thick Table Top With18mm Thick Bwp Plywood (Is 303 Bwp Grade,15 Yrs Warranty). Modesty Panel On The Back Side With Size Of 900 Mm X 400 Mm With 18Mm Thick Bwp Plywood. Desk Grommet On Top. 2 No. Drawer And 1 Cpu Storage Unit With Ventilation. Locking Arrangements For Drawer. The Table Should Be Adequately Reinforced From The Underside Using Suitable Structural Members To Avoid Sagging. Telescopic Channel & Handles: Rust Free. Full Extension, Ball-Bearing Heavy Duty Telescopic Drawer Channel, 450 Mm Nominal Length, Zinc-Plated/Powder-Coated, Minimum Load Rating 35 Kg, Fabricated From Cold-Rolled Steel With A Minimum Sheet Thickness Of 1.2 Mm, 50,000 Open/Close Cycles Per ManufacturerS Test Report. Chromium Plated Durable Handles, Size And Sample Approval From Employer. Sides: Sturdy, Stable Support Structure Made Of 18Mm Thick Bwp Plywood. Polypropylene Buffers Fitted At Bottom Under Each Leg For Making The Floor Scratch Resistant. The Fitting Will Be Kd Fittings Format Like Minifix And Barrelnut. Laminates: Hot Pressed 1Mm Decorative Laminate On Top And Outer Surfaces And 0.7Mm White Laminate On Other Surfaces. Both Laminates Shall Be Factory Pressed And Bonded, And Conform To Is 2046. Pvc Edge Banding: Matching 2 Mm Thick Pvc Edge Banding On Exposed Tabletop Edges And All Other Surface Of Plywood Shall Have 0.8Mm Pvc Edge Banding. Edge Banding With Hot Pasted Edge Banding Machine. Corners Radiused, No Visible Glue Line. Surface Quality: Smooth, Scratch-Resistant, Moisture-Resistant And Easy-To-Clean Finish, With No Sharp Edges Or Visible Manufacturing Defects. Workmanship: The Table Shall Be Rigid, Level, Stable And Free From Wobbling, Delamination And Loose Joints. Plywood: Archidply/ Century Ply/Green Ply. Laminates: Archidlam/ Century / Greenlam/ Merino Hardware: Hettich/ Yale / Doorset/ Hafele/ Ebco. Approval: Physical Samples Of Plywood, Laminate, Color And Finished Wood To Be Approved Before Production. , Locker Cabinet 20 Locker In Each Steel Locker With Locks (20 Locker Set (5 Column & 4 Row) Will Be 1 Unit) Overall Dimensions: 1875 Mm (W) × 470 Mm (D) × 1950 Mm (H) Each Stack Including Levelers, As Per Approved Manufacturer Drawings. Each Locke Size: 450Mm Height 375Mm Width X 470Mm Depth. Corrosion Free. Construction: Aesthetically Appealing, Completely Knock-Down Modular Construction. Screw-Type Adjustable Levelers With A Nominal Height Of 50 Mm And An Adjustment Range Of 15 Mm, As Per Manufacturers Design. Material And Body: Fabricated From Cold-Rolled Close-Annealed (Crca) Steel Sheet Of Minimum 0.5 Mm Nominal Thickness, With Suitable Formed Edges And Stiffeners. Top And Bottom Stiffeners Shall Be Fabricated From 1.2 Mm Nominal-Thickness Crca Steel Sheet. The Manufacturer Shall Ensure Adequate Rigidity And Stability Of The Assembled Locker Under Normal Intended Use. Doors: Fabricated From 0.6 Mm Nominal-Thickness Crca Steel Sheet, Suitably Formed And Stiffened To Prevent Undue Bending During Normal Operation. Soft-Closing Hinges Shall Be Provided. Door Dimensions And Formed Depth Shall Conform To The Approved Manufacturers Drawing. Shelves: Fabricated From 0.5 Mm Nominal-Thickness Crca Steel Sheet, With Suitably Formed Bends For Rigidity. Load Capacity Of 20 Kg. Locking System: Conventional Lock And Key Arrangements. 2 No. Keys. Surface Finish: All Steel Components Shall Undergo Suitable Surface Preparation And Pretreatment Before Application Of Epoxy-Polyester Powder Coating. The Coating Shall Have A Minimum Dry-Film Thickness Of 50 Microns, With Uniform Coverage And No Visible Defects. Workmanship: All Edges Shall Be Properly Deburred And Finished. The Locker Shall Be Free From Sharp Edges, Defective Welds, Loose Joints, Coating Defects And Misaligned Doors. Doors Shall Open And Close Smoothly, And The Assembled Unit Shall Be Stable And Level. , Table Overall Dimensions (W × D × H): 1200 × 600 × 750 Mm. Table Top: 38Mm Thick Table Top With18mm Thick Bwp Plywood (Is 303 Bwp Grade,15 Yrs Warranty). Modesty Panel On The Back Side With Size Of 1200 Mm X 600 Mm With 18Mm Thick Bwp Plywood. Desk Grommet On Top. The Table Should Be Adequately Reinforced From The Underside Using Suitable Structural Members To Avoid Sagging. Sides: Sturdy, Stable Support Structure Made Of 18Mm Thick Bwp Plywood. Polypropylene Buffers Fitted At Bottom Under Each Leg For Making The Floor Scratch Resistant. The Fitting Will Be Kd Fittings Format Like Minifix And Barrelnut. 1 No. Drawer For Storage. Telescopic Channel & Handles: Rust Free. Full Extension, Ball-Bearing Heavy Duty Telescopic Drawer Channel, 450 Mm Nominal Length, Zinc-Plated/Powder-Coated, Minimum Load Rating 35 Kg, Fabricated From Cold-Rolled Steel With A Minimum Sheet Thickness Of 1.2 Mm, 50,000 Open/Close Cycles Per ManufacturerS Test Report. Chromium Plated Durable Handles, Size And Sample Approval From Employer. Laminates: Hot Pressed 1Mm Decorative Laminate On Top And Outer Surfaces And 0.7Mm White Laminate On Other Surfaces. Both Laminates Shall Be Factory Pressed And Bonded, And Conform To Is 2046. Pvc Edge Banding: Matching 2 Mm Thick Pvc Edge Banding On Exposed Tabletop Edges And All Other Surface Of Plywood Shall Have 0.8Mm Pvc Edge Banding. Edge Banding With Hot Pasted Edge Banding Machine. Corners Radiused, No Visible Glue Line. Surface Quality: Smooth, Scratch-Resistant, Moisture-Resistant And Easy-To-Clean Finish, With No Sharp Edges Or Visible Manufacturing Defects. Workmanship: The Table Shall Be Rigid, Level, Stable And Free From Wobbling, Delamination And Loose Joints. Plywood: Archidply/ Century Ply/Green Ply. Laminates: Archidlam/ Century / Greenlam/ Merino Hardware: Hettich/ Yale / Doorset/ Hafele/ Ebco. Approval: Physical Samples Of Plywood, Laminate, Color And Finished Wood To Be Approved Before Production. , Security Room/ Supervisor Room Etc. , Bed Supply & Installation Of Single Bed With Storage Bed Size: 2050Mm Length, 955Mm Width And 430Mm Height, Side Thickness 20Mm. Headboard: 955Mm Width & 940 Mm Height, Thickness 38Mm Foot-Board: 955Mm Width & 470 Mm Height, Thickness 38Mm Storage: Single Horizontal Partition, Top Open Box Storage Length= 1990Mm (995 X 2), Box Storage Depth= 320 Mm, 3 Hinges And 2 Handles. Bed Rest And Floor Rest Will Have 18Mm Ply With Laminates In Both Sides And Every Part Of The Bed. The Lower Base And Upper Base Of The Bed Will Have 12 Mm Thick Bwp Plywood With Laminate On Top Surface. 18 Mm Thick Bwp Plywood With 15 Years Warranty With All External Visible Surface Factory Pasted Laminate With 1.5Mm Thick And Inside Surface 0.70 Mm Thick White Laminate Factory Pasted. 2Mm Pvc Edge Banding On Headboard And Footboard With Corner Rounding In The Exposed Edges With Through Feed Edge Banding Machine With Help Of Hot Melt Glue Above 200 Degree Celsius. 0.8Mm Edge Banding On All Other Surface Of Plywood With Edge Corner Rounding Through Feed Edge Banding Machine With Help Of Hot Melt Glue Above 200 Degree Celsius. Mosquito Net Stand ¾M.S Pipe Of 2Mm Thickness. Plywood: Archidply/ Century Ply/Green Ply. Laminates: Archidlam/ Century / Greenlam/ Merino Hardware: Hettich/ Yale / Doorset/ Hafele/ Ebco. Fixing Shall Be Made With Bed Jointers Of Heavy-Duty Bis Marked To Make The Bed Modular. There Shall Be Polypropylene Buffers Fitted For Making The Floor Scratch Resistant. The Fittings Will Be Kd Fittings Format Like Minifix And Barrelnut. The Side Joint With Headboard And Foot Board Must Have 75Mm L Corner. , Mattress (The Dimension Of Mattress Should Be In Line With The Bed Size As Mentioned Above) Number Of Layers-Two Layers, Thickness Of Core Layer} - 50Mm, Thickness Of Core Layer2 - 50Mm, Material Of Core Layer: Pu Foam, Material Of Core Layer2: Pu Foam, Quilting : Both Side Quilting (Double Sided), Thickness Of Quilting:8Mm, Fabric Composition: Polyester, Construction: Woven, Fabric Mass :80G/M2, Core Layer I Density : 32 Kg/M3, Core Layer 2 Density : 32 Kg/M3 . Compression Set For Pu Foam : 10%,Durability Test For Complete Mattress: Loss Of Height Not More Than 13Mm. Resistance To Ageing For Pu Foam As Per Is 7888 Latest: Shall Meet The Requirement Of Is 7933 Latest. Durability Test For Pu Foam As Per Is 7888 Latest: Shall Meet The Requirement Of Is 7933 Latest. Durability Test For Complete Mattress: Loss Of Height Not More Than 13Mm As Per Astm 1566. Test Report To Be Furnished. Approved Makes: Sleepwell/ Duro Flex/Kurl-On/ Godrej/ Flo Mattress , Pillow Conforming To Standards: Dgqa providing Specn No. S/1706/Synthetic Pillow/ Tc-6 Length: 700Mm, Width: 400Mm, Height Of Pillow At Centre 170Mm Body Fabric: Cloth Plain Weave Polyester Cotton (67:33) White Ends Per Cm: 40, Picks Per Cm: 30 Body Fabric Mass (G/Sqm): 110 Filling Material: Hollow Siliconized Polyester Fibre Of 7 Denier Mass Of Filling Material (G): 625 Total Mass Of Synthetic Pillow (G): 715 Reinforcing/ Piping: Shroud Laid Cotton Line Of 2 Mm Dia Availability Of Test Report From Designated Ahsp,Nabl/ Ilac Accredited Or Central Government Lab To Prove Conformity Of Products To The Specification , Table Supply & Installation Of Table Length= 1200 Mm, Width= 600 Mm, Height= 750 Mm One Drawer And One Storage With Adjustable, Modesty Panel On The Back Side With Size Of 1200 Mm X 375Mm And A Foot Rest In The Bottom Size 820Mm X 100 Mm. Drawer Facia 420Mm X 150Mm With 450Mm Telescopic Channel & Storage Facia: 420Mm X 460Mm Magnetic Close Auto Hinges Chrome Coated And Locking Arrangements, Hole With Grommet For Cable Management. Top Of The Table Will Be 38 Mm Thick, Side Of The Table Will Be 25 Mm Thick And Drawer Bottom Will Be 6Mm Thick. All The Other Parts Of The Table Will Be Made From 18 Mm Ply. 18 Mm Thick Bwp Plywood With 15 Years Warranty With All External Visible Surface Factory Pasted Laminate With 1.5Mm Thick And Inside Surface 0.70 Mm Thick White Laminate Factory Pasted. 2Mm Pvc Edge Banding On Top Surface With Corner Rounding In The Exposed Edges With Through Feed Edge Banding Machine With Help Of Hot Melt Glue Above 200 Degree Celsius. 0.8Mm Edge Banding On All Other Surface Of Plywood With Edge Corner Rounding Through Feed Edge Banding Machine With Help Of Hot Melt Glue Above 200 Degree Celsius. Chromium Plated Durable Handles, Size And Sample Approval From Employer. Telescopic Channel & Handles: Rust Free. Full Extension, Ball-Bearing Heavy Duty Telescopic Drawer Channel, 450 Mm Nominal Length, Zinc-Plated/Powder-Coated, Minimum Load Rating 35 Kg, Fabricated From Cold-Rolled Steel With A Minimum Sheet Thickness Of 1.2 Mm, 50,000 Open/Close Cycles Per ManufacturerS Test Report. Chromium Plated Durable Handles, Size And Sample Approval From Employer. Plywood: Archidply/ Century Ply/Green Ply. Laminates: Archidlam/ Century / Greenlam/ Merino Hardware: Hettich/ Yale / Doorset/ Hafele/ Ebco. There Shall Be Polypropylene Buffers Fitted For Making The Floor Scratch Resistant. The Fittings Will Be Kd Fittings Format Like Minifix And Barrelnut. , Chair Supply & Installation Of 4 Leg Chair Supply And Installation Of Item Size Seat Assembly: The Seat Assembly Should Be Made Up Of 1.2 ±0.Lcm. Thick Hot-Pressed Plywood , Upholstered With Fabric Upholstery Covers And Moulded Polyurethane Foam. Seat Size: 47 .0 Cm. (W) X 48.0 Cm. (.D) Back Assembly: The Back Assembly. Should Be Made Of Powder Coated (Dft 40-60 Microns) Tubular Frame Of O 2.54 ±0.03Cm. X 0.2 ±0.016Cm.Thk. Ms Erw Tube Designed With Contoured Lumbar Support For Extra Comfort. The Back Should Be Upholstered Using Double Layer Spacer Mesh Fabric With High Tenacity Yarn. Back Size : 46.5 Cm. (W) X 60.5Cm. (H) High Resilience (Hr) Polyurethane Foam: The Hr Polyurethane Foam Should Be Moulded With Density =45+/-2 Kg/M3 And Hardness Load 16 ± 2 Kgf For 25% Compression. Armrests: The One-Piece Armrests Should Be Injection Moulded From Black Co-Polymer Polypropylene. Tubular Frame: The Powder Coated (Dft 40-60.Microns) Tubular Frame Should Be Cantilever Type & Made Of (O2.54 ±0.03Cm. X 0.2 ±0.016Cm Thick M.S.E.R.W. Tube. The Chair Seat Should Be Provided In 2 Colours (Red & Blue) Approved Make: Godrej/ Geeken/ Featherlite/ Herman Miller/ Steelcase , Storage Cabinet Overall Dimensions (W × D × H): 900Mm × 450Mm × 1200 Mm. There Will Be Three Shelves With Two Handles And Soft Close Auto Hinges. Cabinet: Sturdy, Stable Support Structure Made Of 18Mm Thick Bwp Plywood (Is 303 Bwp Grade,15 Yrs Warranty) With 3 Shelves As Per Design. Polypropylene Buffers Fitted At Bottom Under For Making The Floor Scratch Resistant. The Fitting Will Be Kd Fittings Format Like Minifix And Barrelnut. Laminates: Hot Pressed 1Mm Decorative Laminate On Top And Outer Surfaces And 0.7Mm White Laminate On Other Surfaces. Both Laminates Shall Be Factory Pressed And Bonded, And Conform To Is 2046. Pvc Edge Banding: Matching 2 Mm Thick Pvc Edge Banding On Exposed Edges And All Other Surface Of Plywood Shall Have 0.8Mm Pvc Edge Banding. Edge Banding With Hot Pasted Edge Banding Machine. Corners Radiused, No Visible Glue Line. Surface Quality: Smooth, Scratch-Resistant, Moisture-Resistant And Easy-To-Clean Finish, With No Sharp Edges Or Visible Manufacturing Defects. Handles: Rust Free. Chromium Plated Durable Handles, Size And Sample Approval From Employer. Workmanship: The Cabinet Shall Be Rigid, Level, Stable And Free From Wobbling, Delamination And Loose Joints. Plywood: Archidply/ Century Ply/Green Ply. Laminates: Archidlam/ Century / Greenlam/ Merino Hardware: Hettich/ Yale / Doorset/ Hafele/ Ebco. Approval: Physical Samples Of Plywood, Laminate, Color And Finished Wood To Be Approved Before Production. , Non-Medical Furniture , Square Stool Overall Dimensions: 411 Mm (L) × 411 Mm (W) × 522 Mm (H). Top: The Top Shall Be Fabricated From Ss 304 Stainless-Steel Sheet Of 1.2Mm Thickness, With A Uniform Buffed Matte Finish. Corrosion Free Stool. Frame: The Supporting Frame Shall Be Fabricated From Mild-Steel Square Hollow Sections Of 25 × 25 Mm Size And 2 Mm Wall Thickness. All Joints Shall Be Securely Welded, Finished Smooth And Free From Sharp Edges, Burrs And Visible Welding Defects. Surface Finish: All Mild-Steel Components Shall Undergo Suitable Surface Pretreatment And Shall Be Finished With Thermosetting Epoxy-Polyester Powder Coating In The Approved Ral White Colour. Floor Protection: Neoprene Shoes Shall Be Provided At The Base To Protect The Floor. Plastic And Rubber Components: All Exposed Plastic And Rubber Components Shall Be Grey In Colour. Load Capacity: Safe Working Load Of 135 Kg, Supported By Manufacturer Documentation Or A Suitable Test Report Demonstrating Structural Stability And Load-Bearing Performance. , Sofa 2 Seater Overall Dimensions: 1400 Mm (W) × 900 Mm (D) × 850 Mm (H), With A Seat Height Of 450 Mm Measured From The Top Of The Uncompressed Seat Cushion. Seat & Back Cushion: Cushion Shall Consist Of Pu Foam Of Density 28 ± 2 Kg/M³, With An Additional Top Layer Of Supersoft Pu Foam Of Density 32 ± 2 Kg/M³. The Seat Cushion Shall Be Upholstered With Good-Quality, Durable Upholstery Fabric, Uniformly Stretched And Properly Secured, Ensuring A Wrinkle-Free Finish. Fabric: The Sofa Shall Be Upholstered With Premium-Quality, Durable, Colourfast And Abrasion-Resistant Fabric Suitable For Regular Institutional/Commercial Use. The Fabric Shall Have Uniform Texture, Colour And Finish, Free From Stains, Tears, Defects Or Other Visible Imperfections. The Fabric Shall Be Securely Stitched And Fixed To The Sofa Frame, With Neatly Finished Seams And Edges. The Colour And Pattern Of The Fabric Shall Be Subject To Approval Of The Employer Before Execution. Under Structure: The Main Structural Frame Of The Sofa Shall Be Made Of Seasoned Solid Hardwood Of Suitable Cross-Sections, Free From Major Knots, Cracks, Warping And Other Structural Defects, Ensuring Adequate Strength, Rigidity And Durability. 18Mm Thick Bwp Plywood Shall Be Used If Required. All Wooden Components Shall Be Properly Joined And Securely Assembled To Ensure Structural Stability. The Seat Support Shall Comprise A Rigid, Adequately Reinforced Plywood Base Securely Fixed To The Solid Wooden Frame. High-Resilience Pu Foam Cushioning Shall Be Provided Over The Base To Ensure Adequate Seating Comfort, Strength And Durability. The Construction Shall Be Free From Sagging, Abnormal Noise Or Deformation During Normal Use. Legs: Wooden Leg Assembly. Color Will Be Approved By The Employer Before Production. , Sofa 3 Seater Overall Dimensions: 2000 Mm (W) × 900 Mm (D) × 850 Mm (H), With A Seat Height Of 450 Mm Measured From The Top Of The Uncompressed Seat Cushion. Seat & Back Cushion: Cushion Shall Consist Of Pu Foam Of Density 28 ± 2 Kg/M³, With An Additional Top Layer Of Supersoft Pu Foam Of Density 32 ± 2 Kg/M³. The Seat Cushion Shall Be Upholstered With Good-Quality, Durable Upholstery Fabric, Uniformly Stretched And Properly Secured, Ensuring A Wrinkle-Free Finish. Fabric: The Sofa Shall Be Upholstered With Premium-Quality, Durable, Colourfast And Abrasion-Resistant Fabric Suitable For Regular Institutional/Commercial Use. The Fabric Shall Have Uniform Texture, Colour And Finish, Free From Stains, Tears, Defects Or Other Visible Imperfections. The Fabric Shall Be Securely Stitched And Fixed To The Sofa Frame, With Neatly Finished Seams And Edges. The Colour And Pattern Of The Fabric Shall Be Subject To Approval Of The Employer Before Execution. Under Structure: The Main Structural Frame Of The Sofa Shall Be Made Of Seasoned Solid Hardwood Of Suitable Cross-Sections, Free From Major Knots, Cracks, Warping And Other Structural Defects, Ensuring Adequate Strength, Rigidity And Durability. 18Mm Thick Bwp Plywood Shall Be Used If Required. All Wooden Components Shall Be Properly Joined And Securely Assembled To Ensure Structural Stability. The Seat Support Shall Comprise A Rigid, Adequately Reinforced Plywood Base Securely Fixed To The Solid Wooden Frame. High-Resilience Pu Foam Cushioning Shall Be Provided Over The Base To Ensure Adequate Seating Comfort, Strength And Durability. The Construction Shall Be Free From Sagging, Abnormal Noise Or Deformation During Normal Use. Legs: Wooden Leg Assembly. Color Will Be Approved By The Employer Before Production. , Sofa 1 Seater Overall Dimensions: 900 Mm (W) × 900 Mm (D) × 850 Mm (H), With A Seat Height Of 450 Mm Measured From The Top Of The Uncompressed Seat Cushion. Seat & Back Cushion: Cushion Shall Consist Of Pu Foam Of Density 28 ± 2 Kg/M³, With An Additional Top Layer Of Supersoft Pu Foam Of Density 32 ± 2 Kg/M³. The Seat Cushion Shall Be Upholstered With Good-Quality, Durable Upholstery Fabric, Uniformly Stretched And Properly Secured, Ensuring A Wrinkle-Free Finish. Fabric: The Sofa Shall Be Upholstered With Premium-Quality, Durable, Colourfast And Abrasion-Resistant Fabric Suitable For Regular Institutional/Commercial Use. The Fabric Shall Have Uniform Texture, Colour And Finish, Free From Stains, Tears, Defects Or Other Visible Imperfections. The Fabric Shall Be Securely Stitched And Fixed To The Sofa Frame, With Neatly Finished Seams And Edges. The Colour And Pattern Of The Fabric Shall Be Subject To Approval Of The Employer Before Execution. Under Structure: The Main Structural Frame Of The Sofa Shall Be Made Of Seasoned Solid Hardwood Of Suitable Cross-Sections, Free From Major Knots, Cracks, Warping And Other Structural Defects, Ensuring Adequate Strength, Rigidity And Durability. 18Mm Thick Bwp Plywood Shall Be Used If Required. All Wooden Components Shall Be Properly Joined And Securely Assembled To Ensure Structural Stability. The Seat Support Shall Comprise A Rigid, Adequately Reinforced Plywood Base Securely Fixed To The Solid Wooden Frame. High-Resilience Pu Foam Cushioning Shall Be Provided Over The Base To Ensure Adequate Seating Comfort, Strength And Durability. The Construction Shall Be Free From Sagging, Abnormal Noise Or Deformation During Normal Use. Legs: Wooden Leg Assembly. Color Will Be Approved By The Employer Before Production. , Executive Chair Seat Size: 470 Mm (W) × 500 Mm (D). Back Size: 450 Mm (W) × 650 Mm (H). High-Back Ergonomic Revolving Executive Chair With Cushioned Seat Upholstered In High-Quality, Durable Fabric/Leatherette And Breathable Mesh Backrest. Seat Shall Be Provided With High-Resilience (Hr) Polyurethane Foam Of Minimum Density 45 ± 2 Kg/M³ And Hardness 16 ± 2 Kgf At 25% Compression, Tested In Accordance With Is 7888 With Nylon Base. The Back Shall Consist Of An Injection-Moulded Glass-Filled Nylon Frame Upholstered With Micro-Mesh Fabric Made Of High-Tenacity Yarn. The Chair Shall Have Adjustable Lumbar Support,Neckrest, Height-Adjustable Armrests, Pneumatic Seat-Height Adjustment, Synchro-Tilt Mechanism With Tilt-Tension Adjustment And Multiple Locking Positions With Anti-Shock Feature. The Chair Shall Be Fitted With A Heavy-Duty Five-Star Pedestal Made Of Reinforced Glass-Filled Nylon Or Die-Cast Aluminium Alloy, With Five Twin-Wheel Castors Suitable For The Intended Flooring. The Chair Shall Have A Minimum User-Weight Capacity Of 120 Kg And Comply With Applicable Office-Chair Strength, Stability And Durability Standards. Approved Make: Godrej/ Geeken/ Featherlite/ Herman Miller/ Steelcase , Cabin Table With Storage Size: 1500 (W) X750 (D) X750 (H) Overall Dimensions (W × D × H): 1500 × 750 × 750 Mm. Table Top: 38Mm Thick Table Top With18mm Thick Bwp Plywood (Is 303 Bwp Grade,15 Yrs Warranty). Modesty Panel On The Back Side With Size Of 1500 Mm X 600 Mm With 18Mm Thick Bwp Plywood. Desk Grommet On Top. The Table Should Be Adequately Reinforced From The Underside Using Suitable Structural Members To Avoid Sagging. Sides: Sturdy, Stable Support Structure Made Of 18Mm Thick Bwp Plywood. Polypropylene Buffers Fitted At Bottom Under Each Leg For Making The Floor Scratch Resistant. The Fitting Will Be Kd Fittings Format Like Minifix And Barrelnut. Drawer For Storage With Telescopic Channel On One Side Only. Telescopic Channel & Handles: Rust Free. Full Extension, Ball-Bearing Heavy Duty Telescopic Drawer Channel, 450 Mm Nominal Length, Zinc-Plated/Powder-Coated, Minimum Load Rating 35 Kg, Fabricated From Cold-Rolled Steel With A Minimum Sheet Thickness Of 1.2 Mm, 50,000 Open/Close Cycles Per ManufacturerS Test Report. Chromium Plated Durable Handles, Size And Sample Approval From Employer. Laminates: Hot Pressed 1Mm Decorative Laminate On Top And Outer Surfaces And 0.7Mm White Laminate On Other Surfaces. Both Laminates Shall Be Factory Pressed And Bonded, And Conform To Is 2046. Pvc Edge Banding: Matching 2 Mm Thick Pvc Edge Banding On Exposed Tabletop Edges And All Other Surface Of Plywood Shall Have 0.8Mm Pvc Edge Banding. Edge Banding With Hot Pasted Edge Banding Machine. Corners Radiused, No Visible Glue Line. Surface Quality: Smooth, Scratch-Resistant, Moisture-Resistant And Easy-To-Clean Finish, With No Sharp Edges Or Visible Manufacturing Defects. Workmanship: The Table Shall Be Rigid, Level, Stable And Free From Wobbling, Delamination And Loose Joints. Plywood: Archidply/ Century Ply/Green Ply. Laminates: Archidlam/ Century / Greenlam/ Merino Hardware: Hettich/ Yale / Doorset/ Hafele/ Ebco. Approval: Physical Samples Of Plywood, Laminate, Color And Finished Wood To Be Approved Before Production. , 3 Seater Visitors Chair Size: 1800Mm(L)X 650Mm(D)X 950Mm(H), Seating Height 450Mm, Load Capacity- 150 Kg Per Seat. Seat Size: 500Mm Width X 450Mm Depth, Back Size: 500Mm Width X 500 Mm Height Main Frame: Rectangular Mild Steel (M.S.) Electric Resistance Welded (Erw) Tubes Of Nominal Size 80 × 40 Mm, Minimum Wall Thickness 2.0 Mm. Durable Powder-Coated Finish. Seat And Backrest Shell: Fabricated From Cold-Rolled Mild Steel Sheet Of Minimum Thickness 1.5 Mm, With Perforations And Formed Edges As Per The Approved Design. Powder Coated Finish. Side Bars: Solid Steel Sections Of The Approved Cross-Sectional Dimensions, With A Chrome-Plated Finish. Fluting, End Finishing And Compatible Plastic Inserts Shall Be Provided As Per The Approved Design. Assembly And Fasteners: The Seat Shells Shall Be Securely Fixed To The Brackets And Crossbeam Using M8 Bolts Or Equivalent Corrosion-Resistant Fasteners. The Number, Size And Arrangement Of Fasteners Shall Be As Per The Approved Manufacturers Assembly Drawing And Shall Ensure Adequate Rigidity And Stability Under Intended Service Conditions. Floor Protectors: Durable, Non-Marking Polypropylene Or Equivalent Buffers Shall Be Fitted To All Floor-Contact Points To Prevent Scratching And Damage To The Flooring. Workmanship And Finish: All Components Shall Be Free From Sharp Edges, Burrs, Cracks, Defective Welds And Visible Surface Defects. The Completed Chair Shall Be Stable, Rigid, Corrosion-Resistant And Suitable For Continuous Use In Hospital And Public Waiting Areas. Approval And Testing: The Supplier Shall Submit Dimensional Drawings, Material Specifications And Finish Details For Approval. The Assembled Chair Shall Meet The Applicable Requirements For Structural Stability, Strength And Durability. Gross Weight : 30 Kg Approx. , Cafeteria Chair 1. Seat/Back (Chair): The Seat And Back Are Made Up Of Injection Moulded High Impact Strength Polypropylene, Polymer Compound With Indoor Grade Uv Resistance. Seat Size : 52.5Cm. (W) X 53.2Cm.(D) Back Size : 51.6Cm.(W) X40.5 Cm.(H) 2. S.S Understructure Option For Café Chair : The Tubular Welded Frame Is Made From Dia 2.22 + 0.03 Cm X 0.12+0.0128 Cm And 3.5 + 0.03 Cm X 1.5 +0.03 Cm X 0.12 + 0.0128 Cm Stainless Steel 304 Grade Tube. The Tubes Are Buff Polished To Give Shiny Finish. 3. Shoe: The Shoes Are Made Of High Impact Strength Polypropylene Polymer Compound With Indoor Grade Uv Resistance And Pressed Fitted With Tubular Frame. There Shall Be Polypropylene Buffers Fitted For Making The Floor Scratch Resistant. Material And Color Approval Shall Be Taken Prior To Production. Overall Dimensions Of Chair Seat Height - 45.0 Cm. Height - 84.5Cm. Width & Depth Of Chair As Measured From Base, Width 62.3Cm, Depth 55.8 Cm. Approved Make: Godrej/ Geeken/ Featherlite/ Herman Miller/ Steelcase , Seminar Chair With Arm And Without Desklet Dimension: 600Mm To 700Mm (W) X 900Mm (H)X 600Mm To 700Mm(D), Seat Height: 450Mm. Back: 450Mm Width X 450Mm Height Seat Size: 470Mm Width X 500Mm Depth Ergonomic Fixed Seminar Chair With Cushioned Seat Upholstered In High-Quality, Durable Fabric/Leatherette And Breathable Mesh Backrest. Seat Shall Be Provided With High-Resilience (Hr) Polyurethane Foam Of Minimum Density 45 ± 2 Kg/M³ And Hardness 16 ± 2 Kgf At 25% Compression, Tested In Accordance With Is 7888 With Nylon Base. The Back Shall Consist Of An Injection-Moulded Glass-Filled Nylon Frame Upholstered With Micro-Mesh Fabric Made Of High-Tenacity Yarn. The Chair Shall Be Fitted With A Heavy-Duty Four-Star Pedestal Made Of Reinforced Glass-Filled Nylon Or Die-Cast Aluminium Alloy, With Four Twin-Wheel Castors Suitable For The Intended Flooring. The Chair Shall Have A Minimum User-Weight Capacity Of 120 Kg And Comply With Applicable Office-Chair Strength, Stability And Durability Standards. Approved Make: Godrej/ Geeken/ Featherlite/ Herman Miller/ Steelcase , Office Chair Dimension: 760Mm (W)X 1280Mm (H)X 760Mm (D), Seat Height: 450Mm Ergonomic Revolving Chair With Cushioned Seat Upholstered In High-Quality, Durable Fabric/Leatherette And Breathable Mesh Backrest. Seat Shall Be Provided With High-Resilience (Hr) Polyurethane Foam Of Minimum Density 45 ± 2 Kg/M³ And Hardness 16 ± 2 Kgf At 25% Compression, Tested In Accordance With Is 7888 With Nylon Base. The Back Shall Consist Of An Injection-Moulded Glass-Filled Nylon Frame Upholstered With Micro-Mesh Fabric Made Of High-Tenacity Yarn. The Chair Shall Have Adjustable Lumbar Support, Height-Adjustable Armrests, Pneumatic Seat-Height Adjustment, Synchro-Tilt Mechanism With Tilt-Tension Adjustment And Multiple Locking Positions With Anti-Shock Feature. The Chair Shall Be Fitted With A Heavy-Duty Five-Star Pedestal Made Of Reinforced Glass-Filled Nylon Or Die-Cast Aluminium Alloy, With Five Twin-Wheel Castors Suitable For The Intended Flooring. The Chair Shall Have A Minimum User-Weight Capacity Of 120 Kg And Comply With Applicable Office-Chair Strength, Stability And Durability Standards. Approved Make: Godrej/ Geeken/ Featherlite/ Herman Miller/ Steelcase , Cabinet Drawer ( 4 Drawer Cabinet) Dimensions: 1350 Mm (H) × 450 Mm (W) × 600 Mm (D). Material: All Components Shall Be Made Of Crca Steel With Rigid Knock-Down Construction. Sheet Thickness: All 0.7 Mm Thickness Sheet. Locking System: Centralised Locking With Shooting Bolts And Lever Lock. Drawer Handle: Full-Length Recessed Metal Handle For Easy Operation. Label Holder: Snap-On Plastic Label Holder On Each Drawer Front. Drawer Slides: Precision Ball-Bearing Slides With A Maximum Drawer Load Capacity Of 40 Kg And Durability Of 75,000 Cycles Under The Specified Test Conditions. Safety: Anti-Tipping Mechanism To Prevent Opening Of Multiple Drawers Simultaneously And Anti-Rebound Mechanism. Rigidity: Triangular Steel Plates Shall Be Riveted At The Bottom Corners. Finish: Epoxy Powder Coating. , Centre Table (600Mm X450mm X380mm) Overall Dimensions (W × D × H): 600 × 450 × 380 Mm. Table Top: 18Mm Thick Bwp Plywood (Is 303 Bwp Grade 15 Yrs Warranty) With Hot Pressed 1Mm Decorative Laminate On Top And 0.7Mm White Laminate Underneath. Both Laminates Shall Be Factory Pressed And Bonded, And Conform To Is 2046. Pvc Edge Banding: Matching 2 Mm Thick Pvc Edge Banding On Exposed Tabletop Edges With Hot Pasted Edge Banding Machine. Corners Radiused, No Visible Glue Line. Leg: Sturdy, Stable Support Structure Made Of Seasoned Hardwood Or Teakwood 60Mm X 60Mm With Side Frame Of 70 Mm X 25 Mm. Polypropylene Buffers Fitted At Bottom Under Each Leg For Making The Floor Scratch Resistant. All Exposed Wood Surface Of The Table Will Be Pu Polish. Surface Quality: Smooth, Scratch-Resistant, Moisture-Resistant And Easy-To-Clean Finish, With No Sharp Edges Or Visible Manufacturing Defects. Workmanship: The Table Shall Be Rigid, Level, Stable And Free From Wobbling, Delamination And Loose Joints. Plywood : Archidply/ Century Ply/Green Ply. Laminates: Archidlam/ Century / Greenlam/ Merino Approval: Physical Samples Of Plywood, Laminate, Color And Finished Wood To Be Approved Before Production. , Rectangular Office Table Overall Dimensions (W × D × H): 1500 × 750 × 750 Mm. Overall Dimensions (W × D × H): 1500 × 750 × 750 Mm. Table Top: 38Mm Thick Table Top With18mm Thick Bwp Plywood (Is 303 Bwp Grade,15 Yrs Warranty). Modesty Panel On The Back Side With Size Of 1500 Mm X 600 Mm With 18Mm Thick Bwp Plywood. Desk Grommet On Top. The Table Should Be Adequately Reinforced From The Underside Using Suitable Structural Members To Avoid Sagging. Sides: Sturdy, Stable Support Structure Made Of 18Mm Thick Bwp Plywood. Polypropylene Buffers Fitted At Bottom Under Each Leg For Making The Floor Scratch Resistant. The Fitting Will Be Kd Fittings Format Like Minifix And Barrelnut. Drawer For Storage With Telescopic Channel On One Side Only. Telescopic Channel & Handles: Rust Free. Full Extension, Ball-Bearing Heavy Duty Telescopic Drawer Channel, 450 Mm Nominal Length, Zinc-Plated/Powder-Coated, Minimum Load Rating 35 Kg, Fabricated From Cold-Rolled Steel With A Minimum Sheet Thickness Of 1.2 Mm, 50,000 Open/Close Cycles Per ManufacturerS Test Report. Chromium Plated Durable Handles, Size And Sample Approval From Employer. Laminates: Hot Pressed 1Mm Decorative Laminate On Top And Outer Surfaces And 0.7Mm White Laminate On Other Surfaces. Both Laminates Shall Be Factory Pressed And Bonded, And Conform To Is 2046. Pvc Edge Banding: Matching 2 Mm Thick Pvc Edge Banding On Exposed Tabletop Edges And All Other Surface Of Plywood Shall Have 0.8Mm Pvc Edge Banding. Edge Banding With Hot Pasted Edge Banding Machine. Corners Radiused, No Visible Glue Line. Surface Quality: Smooth, Scratch-Resistant, Moisture-Resistant And Easy-To-Clean Finish, With No Sharp Edges Or Visible Manufacturing Defects. Workmanship: The Table Shall Be Rigid, Level, Stable And Free From Wobbling, Delamination And Loose Joints. Plywood: Archidply/ Century Ply/Green Ply. Laminates: Archidlam/ Century / Greenlam/ Merino Hardware: Hettich/ Yale / Doorset/ Hafele/ Ebco. Approval: Physical Samples Of Plywood, Laminate, Color And Finished Wood To Be Approved Before Production. , Side Table Overall Dimensions (W × D × H): 1000 × 600 × 750 Mm. Table Top: 38Mm Thick Table Top With18mm Thick Bwp Plywood (Is 303 Bwp Grade,15 Yrs Warranty). Modesty Panel On The Back Side With Size Of 1000 Mm X 600 Mm With 18Mm Thick Bwp Plywood. Desk Grommet On Top. The Table Should Be Adequately Reinforced From The Underside Using Suitable Structural Members To Avoid Sagging. Sides: Sturdy, Stable Support Structure Made Of 18Mm Thick Bwp Plywood. Polypropylene Buffers Fitted At Bottom Under Each Leg For Making The Floor Scratch Resistant. The Fitting Will Be Kd Fittings Format Like Minifix And Barrelnut. 1 No. Drawer For Storage With Telescopic Channel. Telescopic Channel & Handles: Rust Free. Full Extension, Ball-Bearing Heavy Duty Telescopic Drawer Channel, 450 Mm Nominal Length, Zinc-Plated/Powder-Coated, Minimum Load Rating 35 Kg, Fabricated From Cold-Rolled Steel With A Minimum Sheet Thickness Of 1.2 Mm, 50,000 Open/Close Cycles Per ManufacturerS Test Report. Chromium Plated Durable Handles, Size And Sample Approval From Employer. Laminates: Hot Pressed 1Mm Decorative Laminate On Top And Outer Surfaces And 0.7Mm White Laminate On Other Surfaces. Both Laminates Shall Be Factory Pressed And Bonded, And Conform To Is 2046. Pvc Edge Banding: Matching 2 Mm Thick Pvc Edge Banding On Exposed Tabletop Edges And All Other Surface Of Plywood Shall Have 0.8Mm Pvc Edge Banding. Edge Banding With Hot Pasted Edge Banding Machine. Corners Radiused, No Visible Glue Line. Surface Quality: Smooth, Scratch-Resistant, Moisture-Resistant And Easy-To-Clean Finish, With No Sharp Edges Or Visible Manufacturing Defects. Workmanship: The Table Shall Be Rigid, Level, Stable And Free From Wobbling, Delamination And Loose Joints. Plywood: Archidply/ Century Ply/Green Ply. Laminates: Archidlam/ Century / Greenlam/ Merino Hardware: Hettich/ Yale / Doorset/ Hafele/ Ebco. Approval: Physical Samples Of Plywood, Laminate, Color And Finishing To Be Approved Before Production. , Locker (375 Mm (W) × 470 Mm (D) × 1950 Mm (H) Each Stack) Steel Locker With Locks Overall Dimensions: 375 Mm (W) × 470 Mm (D) × 1950 Mm (H) Each Stack Including Levelers, As Per Approved Manufacturer Drawings. 2 Door. Combined Stack Shall Be Considered As A Unit. Construction: Aesthetically Appealing, Completely Knock-Down Modular Construction. Screw-Type Adjustable Levelers With A Nominal Height Of 50 Mm And An Adjustment Range Of 15 Mm, As Per Manufacturers Design. Material And Body: Fabricated From Cold-Rolled Close-Annealed (Crca) Steel Sheet Of Minimum 0.5 Mm Nominal Thickness, With Suitable Formed Edges And Stiffeners. Top And Bottom Stiffeners Shall Be Fabricated From 1.2 Mm Nominal-Thickness Crca Steel Sheet. The Manufacturer Shall Ensure Adequate Rigidity And Stability Of The Assembled Locker Under Normal Intended Use. Doors: Fabricated From 0.6 Mm Nominal-Thickness Crca Steel Sheet, Suitably Formed And Stiffened To Prevent Undue Bending During Normal Operation. Soft-Closing Hinges Shall Be Provided. Door Dimensions And Formed Depth Shall Conform To The Approved Manufacturers Drawing. Shelves: Fabricated From 0.5 Mm Nominal-Thickness Crca Steel Sheet, With Suitably Formed Bends For Rigidity. Load Capacity Of 20 Kg. Locking System: Conventional Lock And Key Arrangements. 2 No. Keys. Surface Finish: All Steel Components Shall Undergo Suitable Surface Preparation And Pretreatment Before Application Of Epoxy-Polyester Powder Coating. The Coating Shall Have A Minimum Dry-Film Thickness Of 50 Microns, With Uniform Coverage And No Visible Defects. Workmanship: All Edges Shall Be Properly Deburred And Finished. The Locker Shall Be Free From Sharp Edges, Defective Welds, Loose Joints, Coating Defects And Misaligned Doors. Doors Shall Open And Close Smoothly, And The Assembled Unit Shall Be Stable And Level. , Recliner Chair Overall Dimensions: 900 Mm (W) × 900 Mm (D) × 1050 Mm (H) Seat Height: 450 Mm - 480 Mm, Seat Depth: 520 Mm - 550 Mm Frame Construction: Kiln-Dried Solid Hardwood Combined With Bwp Plywood. Reinforced Corner Blocks For Enhanced Structural Integrity. Reclining Mechanism: Heavy-Gauge Alloy Steel Chassis With Rust-Resistant Powder Coating. Manual (Latch/Pull-Tab) Button Configurations. The Foot Resting Flap Shall Come Out From Below To Expand The Body To Give Comfort. Cushioning & Comfort: Seat: High-Resilience (Hr) Polyurethane Foam (Density: 40 Kg/M³) Wrapped In Polyester Fiber Batting. Crafted With Premium Nappe Air Leather. Suspension: Pocket Spring Coils Combined With High-Tensile Sinuous S-Springs To Prevent Sagging. Backrest & Armrests: High-Density Blown Virgin Microfiber For A Plush, Body-Contouring Feel. , Duty Room Beds Overall Dimension - 2050Mm L X 955Mm D X 600 H Material:Headboard Panels Are Made Of 18 Mm Thick Bwp Plywood.All The Exposed Edges Are Edge Banded With 2 Mm Thick Pvc Edge Banding. Bed Leg Frame Structure Consist Of Metal Frames Made Of M.S. 50 X 25 Mm Box Section In 1.2 Thickness Internal Pipes Made Of 19 X 19 Mm Box Section In 0.9 Mm Thickness. Headboard Pipes Are Made Of 25 X 25 Mm Box Section In 0.9 Mm Thickness. Mattress Part Shall Have Made With 18 Mm Thick Bwp Plywood In Two Parts Supported By Structural Section. All Metal Parts Shall Be Powder Coated Matte White Finish. Mosquito Stand: Structure Consist Of Metal Frame Made Of M.S. 19 Mm Square Pipe In 0.9 Mm Thickness. , Mattress (The Dimension Of Mattress Should Be In Line With The Bed Size As Mentioned Above) Number Of Layers-Two Layers, Thickness Of Core Layer} - 50Mm, Thickness Of Core Layer2 - 50Mm, Material Of Core Layer: Pu Foam, Material Of Core Layer2: Pu Foam, Quilting : Both Side Quilting (Double Sided), Thickness Of Quilting:8Mm, Fabric Composition: Polyester, Construction: Woven, Fabric Mass :80G/M2, Core Layer I Density : 32 Kg/M3, Core Layer 2 Density :32Kg/M3 . Compression Set For Pu Foam : 10%,Durability Test For Complete Mattress: Loss Of Height Not More Than 13Mm. Resistance To Ageing For Pu Foam As Per Is 7888 Latest: Shall Meet The Requirement Of Is 7933 Latest. Durability Test For Pu Foam As Per Is 7888 Latest: Shall Meet The Requirement Of Is 7933 Latest. Durability Test For Complete Mattress: Loss Of Height Not More Than 13Mm As Per Astm 1566. Test Report To Be Furnished. Approved Makes: Sleepwell/ Duro Flex/Kurl-On/ Godrej/ Flo Mattress , Pillow Conforming To Standards: Dgqa providing Specn No. S/1706/Synthetic Pillow/ Tc-6 Length: 700Mm, Width: 400Mm, Height Of Pillow At Centre 170Mm Body Fabric: Cloth Plain Weave Polyester Cotton (67:33) White Ends Per Cm: 40, Picks Per Cm: 30 Body Fabric Mass (G/Sqm): 110 Filling Material: Hollow Siliconized Polyester Fibre Of 7 Denier Mass Of Filling Material (G): 625 Total Mass Of Synthetic Pillow (G): 715 Reinforcing/ Piping: Shroud Laid Cotton Line Of 2 Mm Dia Availability Of Test Report From Designated Ahsp,Nabl/ Ilac Accredited Or Central Government Lab To Prove Conformity Of Products To The Specification , Work Table With Drawer Overall Dimensions (W × D × H): 1200 × 750 × 750 Mm. Table Top: 38Mm Thick Table Top With18mm Thick Bwp Plywood (Is 303 Bwp Grade,15 Yrs Warranty). Modesty Panel On The Back Side With Size Of 1200 Mm X 600 Mm With 18Mm Thick Bwp Plywood. Desk Grommet On Top. The Table Should Be Adequately Reinforced From The Underside Using Suitable Structural Members To Avoid Sagging. Sides: Sturdy, Stable Support Structure Made Of 18Mm Thick Bwp Plywood. Polypropylene Buffers Fitted At Bottom Under Each Leg For Making The Floor Scratch Resistant. The Fitting Will Be Kd Fittings Format Like Minifix And Barrelnut. Drawer For Storage With Telescopic Channel. Telescopic Channel & Handles: Rust Free. Full Extension, Ball-Bearing Heavy Duty Telescopic Drawer Channel, 450 Mm Nominal Length, Zinc-Plated/Powder-Coated, Minimum Load Rating 35 Kg, Fabricated From Cold-Rolled Steel With A Minimum Sheet Thickness Of 1.2 Mm, 50,000 Open/Close Cycles Per ManufacturerS Test Report. Chromium Plated Durable Handles, Size And Sample Approval From Employer. Laminates: Hot Pressed 1Mm Decorative Laminate On Top And Outer Surfaces And 0.7Mm White Laminate On Other Surfaces. Both Laminates Shall Be Factory Pressed And Bonded, And Conform To Is 2046. Pvc Edge Banding: Matching 2 Mm Thick Pvc Edge Banding On Exposed Tabletop Edges And All Other Surface Of Plywood Shall Have 0.8Mm Pvc Edge Banding. Edge Banding With Hot Pasted Edge Banding Machine. Corners Radiused, No Visible Glue Line. Surface Quality: Smooth, Scratch-Resistant, Moisture-Resistant And Easy-To-Clean Finish, With No Sharp Edges Or Visible Manufacturing Defects. Workmanship: The Table Shall Be Rigid, Level, Stable And Free From Wobbling, Delamination And Loose Joints. Plywood: Archidply/ Century Ply/Green Ply. Laminates: Archidlam/ Century / Greenlam/ Merino Hardware: Hettich/ Yale / Doorset/ Hafele/ Ebco. Approval: Physical Samples Of Plywood, Laminate, Color And Finished Wood To Be Approved Before Production. , Large Tables (Conference) 1100 (L) X2200 (W) X750 (H) Mm Table Top: The Core Shall Be Of Minimum Thickness 38 Mm (Finished Thickness Not Less Than 38 Mm, Including Surface Laminate). The Core Shall Be Of E1 Formaldehyde Class, Free From Voids, Delamination And Moisture Damage. The Top Shall Be Finished With [High-Pressure Laminate (Hpl), Minimum 1.0 Mm / Melamine-Faced Board / Natural Veneer With Pu Lacquer] On The Upper Surface, And A Balancing Laminate 0.7Mm On The Underside. The Surface Shall Be Scratch, Abrasion And Heat Resistant, Non-Reflective, Matt Or Low Gloss. Minimum 2 Desk Grommets With Covers Shall Be Provided On The Tabletop For Cable Routing. Minimum 3 Electrical Power Sockets With Switches Shall Be Provided, Suitably Integrated Into The Desk. Provision Shall Be Made For Voice/Telephone And Data Connectivity Points, As Required. All Fittings Shall Be Neatly Installed, Safe And Suitable For Office Use. Structure: Use Stiffening Rails, Torsion Box Or An Under-Frame, To Control Top Deflection. The Under-Frame And Legs Shall Be Of Mild Steel Tubes, Steel Tube Legs And Rails- 1.6Mm Wall Thickness, Sheet-Steel Panel Legs 1.2Mm Wall Thickness, Top Mounting Plates And Brackets 2Mm Wall Thickness. All Metal Parts Shall Be Painted With Epoxy-Polyester Powder Coating, Oven-Cured. Clearance: Minimum Knee Clearance Of 620 Mm. Polypropylene Buffers Fitted At Bottom Under Each Leg For Making The Floor Scratch Resistant. The Fitting Will Be Kd Fittings Format Like Minifix And Barrelnut. Pvc Edge Banding: Matching 2 Mm Thick Pvc Edge Banding On Exposed Tabletop Edges And All Other Surface Of Plywood Shall Have 0.8Mm Pvc Edge Banding. Edge Banding With Hot Pasted Edge Banding Machine. Corners Radiused, No Visible Glue Line. Workmanship: The Table Shall Be Rigid, Level, Stable And Free From Wobbling, Delamination And Loose Joints. Plywood: Archidply/ Century Ply/Green Ply. Laminates: Archidlam/ Century / Greenlam/ Merino Hardware: Hettich/ Yale / Doorset/ Hafele/ Ebco. Approval: Physical Samples Of Plywood, Design, Laminate, Color And Finished Wood To Be Approved Before Production. , Large Tables -1500 (L) X2100 (W) X750 (H) Mm Table Top: The Core Shall Be Of Minimum Thickness 38 Mm (Finished Thickness Not Less Than 38 Mm, Including Surface Laminate). The Core Shall Be Of E1 Formaldehyde Class, Free From Voids, Delamination And Moisture Damage. The Top Shall Be Finished With [High-Pressure Laminate (Hpl), Minimum 1.0 Mm / Melamine-Faced Board / Natural Veneer With Pu Lacquer] On The Upper Surface, And A Balancing Laminate 0.7Mm On The Underside. The Surface Shall Be Scratch, Abrasion And Heat Resistant, Non-Reflective, Matt Or Low Gloss. Minimum 2 Desk Grommets With Covers Shall Be Provided On The Tabletop For Cable Routing. Minimum 3 Electrical Power Sockets With Switches Shall Be Provided, Suitably Integrated Into The Desk. Provision Shall Be Made For Voice/Telephone And Data Connectivity Points, As Required. All Fittings Shall Be Neatly Installed, Safe And Suitable For Office Use. Structure: Use Stiffening Rails, Torsion Box Or An Under-Frame, To Control Top Deflection. The Under-Frame And Legs Shall Be Of Mild Steel Tubes, Steel Tube Legs And Rails- 1.6Mm Wall Thickness, Sheet-Steel Panel Legs 1.2Mm Wall Thickness, Top Mounting Plates And Brackets 2Mm Wall Thickness. All Metal Parts Shall Be Painted With Epoxy-Polyester Powder Coating, Oven-Cured. Clearance: Minimum Knee Clearance Of 620 Mm. Polypropylene Buffers Fitted At Bottom Under Each Leg For Making The Floor Scratch Resistant. The Fitting Will Be Kd Fittings Format Like Minifix And Barrelnut. Pvc Edge Banding: Matching 2 Mm Thick Pvc Edge Banding On Exposed Tabletop Edges And All Other Surface Of Plywood Shall Have 0.8Mm Pvc Edge Banding. Edge Banding With Hot Pasted Edge Banding Machine. Corners Radiused, No Visible Glue Line. Workmanship: The Table Shall Be Rigid, Level, Stable And Free From Wobbling, Delamination And Loose Joints. Plywood: Archidply/ Century Ply/Green Ply. Laminates: Archidlam/ Century / Greenlam/ Merino Hardware: Hettich/ Yale / Doorset/ Hafele/ Ebco. Approval: Physical Samples Of Plywood, Design, Laminate, Color And Finished Wood To Be Approved Before Production. , Large Tables (Conference) 3300 (L) X1100 (W) X750 (H) Mm Table Top: The Core Shall Be Of Minimum Thickness 38 Mm (Finished Thickness Not Less Than 38 Mm, Including Surface Laminate). The Core Shall Be Of E1 Formaldehyde Class, Free From Voids, Delamination And Moisture Damage. The Top Shall Be Finished With [High-Pressure Laminate (Hpl), Minimum 1.0 Mm / Melamine-Faced Board / Natural Veneer With Pu Lacquer] On The Upper Surface, And A Balancing Laminate 0.7Mm On The Underside. The Surface Shall Be Scratch, Abrasion And Heat Resistant, Non-Reflective, Matt Or Low Gloss. Minimum 2 Desk Grommets With Covers Shall Be Provided On The Tabletop For Cable Routing. Minimum 3 Electrical Power Sockets With Switches Shall Be Provided, Suitably Integrated Into The Desk. Provision Shall Be Made For Voice/Telephone And Data Connectivity Points, As Required. All Fittings Shall Be Neatly Installed, Safe And Suitable For Office Use. Structure: Use Stiffening Rails, Torsion Box Or An Under-Frame, To Control Top Deflection. The Under-Frame And Legs Shall Be Of Mild Steel Tubes, Steel Tube Legs And Rails- 1.6Mm Wall Thickness, Sheet-Steel Panel Legs 1.2Mm Wall Thickness, Top Mounting Plates And Brackets 2Mm Wall Thickness. All Metal Parts Shall Be Painted With Epoxy-Polyester Powder Coating, Oven-Cured. Clearance: Minimum Knee Clearance Of 620 Mm. Polypropylene Buffers Fitted At Bottom Under Each Leg For Making The Floor Scratch Resistant. The Fitting Will Be Kd Fittings Format Like Minifix And Barrelnut. Pvc Edge Banding: Matching 2 Mm Thick Pvc Edge Banding On Exposed Tabletop Edges And All Other Surface Of Plywood Shall Have 0.8Mm Pvc Edge Banding. Edge Banding With Hot Pasted Edge Banding Machine. Corners Radiused, No Visible Glue Line. Workmanship: The Table Shall Be Rigid, Level, Stable And Free From Wobbling, Delamination And Loose Joints. Plywood: Archidply/ Century Ply/Green Ply. Laminates: Archidlam/ Century / Greenlam/ Merino Hardware: Hettich/ Yale / Doorset/ Hafele/ Ebco. Approval: Physical Samples Of Plywood, Design, Laminate, Color And Finished Wood To Be Approved Before Production. , Bulk Storage Overall Dimensions 900Mm(W)X450mm(D)X1800 Mm(H) . Cabinet: Freestanding Sheet-Steel Storage Cabinets With Lockable Doors (Shutters) And Adjustable Shelves. Material: High Yield Strength Cold-Rolled Low-Carbon Steel With All Sheet Components Shall Be Cold-Rolled Close-Annealed (Crca) Steel. Sheet Thickness: Major Panels: 0.7 Mm, False Side Panel: 0.9 Mm., Bottom Shelf: 0.8 Mm, Door (Shutter) Panels 0.8Mm, Vertical Shutter Handle Sections: 1.2 Mm. Door: The Cabinet Shall Have Two Hinged Doors. Doors Shall Close Flush, With An Even Gap Not Exceeding 3 Mm Along All Edges. Minimum 4 No. Hinges Per Door, Concealed Or Heavy-Duty Pin-Type Steel Hinges. Additional One Door Shall Be Provided In Case The Width Is More Than 1M. Internal Configuration: Adjustable Shelves In Addition To The Fixed Bottom Shelf, Subject To Confirmation Of The Approved Product Configuration. Shelf Positions Shall Be Adjustable On A Vertical Pitch Of 25 Mm, With Positive-Locking Shelf Supports That Cannot Be Dislodged By Normal Use Or Accidental Upward Movement. Shelf Load Capacity: Maximum Uniformly Distributed Load Of 80 Kg Per Shelf, Subject To Manufacturers Test Certification. Locking: 10-Lever Cam Lock With Lock-Lever Mechanism For Secure Locking Of The Shutters.Key Operated. 2 No. Keys Set. Levelers: Screw-Type Levelers With Hexagonal Plastic Bases, Providing A Minimum Additional Unit Height Of 8 Mm And Up To 5 Mm Further Height Adjustment. Finish: Epoxy-Polyester Powder Coating With A Dry-Film Thickness Of 50 ± 10 Microns. Colour: To Be Approved By Employer. Approved Make: Godrej/ Geeken/ Featherlite/ Herman Miller/ Steelcase , Cabinet Overall Dimensions 900Mm(W)X 450Mm(D) X 1800 Mm(H) Cabinet: Freestanding Sheet-Steel Storage Cabinets With Lockable Doors (Shutters) And Adjustable Shelves. Material: High Yield Strength Cold-Rolled Low-Carbon Steel With All Sheet Components Shall Be Cold-Rolled Close-Annealed (Crca) Steel. Sheet Thickness: Major Panels: 0.7 Mm, False Side Panel: 0.9 Mm., Bottom Shelf: 0.8 Mm, Door (Shutter) Panels 0.8Mm, Vertical Shutter Handle Sections: 1.2 Mm. Door: The Cabinet Shall Have Two Hinged Doors. Doors Shall Close Flush, With An Even Gap Not Exceeding 3 Mm Along All Edges. Minimum 4 No. Hinges Per Door, Concealed Or Heavy-Duty Pin-Type Steel Hinges. Additional One Door Shall Be Provided In Case The Width Is More Than 1M. Internal Configuration: Adjustable Shelves In Addition To The Fixed Bottom Shelf, Subject To Confirmation Of The Approved Product Configuration. Shelf Positions Shall Be Adjustable On A Vertical Pitch Of 25 Mm, With Positive-Locking Shelf Supports That Cannot Be Dislodged By Normal Use Or Accidental Upward Movement. Shelf Load Capacity: Maximum Uniformly Distributed Load Of 80 Kg Per Shelf, Subject To Manufacturers Test Certification. Locking: 10-Lever Cam Lock With Lock-Lever Mechanism For Secure Locking Of The Shutters.Key Operated. 2 No. Keys Set. Levelers: Screw-Type Levelers With Hexagonal Plastic Bases, Providing A Minimum Additional Unit Height Of 8 Mm And Up To 5 Mm Further Height Adjustment. Finish: Epoxy-Polyester Powder Coating With A Dry-Film Thickness Of 50 ± 10 Microns. Colour: To Be Approved By Employer. Approved Make: Godrej/ Geeken/ Featherlite/ Herman Miller/ Steelcase , Cabinet Overall Dimensions 800Mm(W)X 600Mm(D) X 750 Mm(H) Cabinet: Freestanding Sheet-Steel Storage Cabinets With Lockable Doors (Shutters) And Adjustable Shelves. Material: High Yield Strength Cold-Rolled Low-Carbon Steel With All Sheet Components Shall Be Cold-Rolled Close-Annealed (Crca) Steel. Sheet Thickness: Major Panels: 0.7 Mm, False Side Panel: 0.9 Mm., Bottom Shelf: 0.8 Mm, Door (Shutter) Panels 0.8Mm, Vertical Shutter Handle Sections: 1.2 Mm. Door: The Cabinet Shall Have Two Hinged Doors. Doors Shall Close Flush, With An Even Gap Not Exceeding 3 Mm Along All Edges. Minimum 4 No. Hinges Per Door, Concealed Or Heavy-Duty Pin-Type Steel Hinges. Additional One Door Shall Be Provided In Case The Width Is More Than 1M. Internal Configuration: Adjustable Shelves In Addition To The Fixed Bottom Shelf, Subject To Confirmation Of The Approved Product Configuration. Shelf Positions Shall Be Adjustable On A Vertical Pitch Of 25 Mm, With Positive-Locking Shelf Supports That Cannot Be Dislodged By Normal Use Or Accidental Upward Movement. Shelf Load Capacity: Maximum Uniformly Distributed Load Of 80 Kg Per Shelf, Subject To Manufacturers Test Certification. Locking: 10-Lever Cam Lock With Lock-Lever Mechanism For Secure Locking Of The Shutters.Key Operated. 2 No. Keys Set. Levelers: Screw-Type Levelers With Hexagonal Plastic Bases, Providing A Minimum Additional Unit Height Of 8 Mm And Up To 5 Mm Further Height Adjustment. Finish: Epoxy-Polyester Powder Coating With A Dry-Film Thickness Of 50 ± 10 Microns. Colour: To Be Approved By Employer. Approved Make: Godrej/ Geeken/ Featherlite/ Herman Miller/ Steelcase , Cabinet Overall Dimensions 1200Mm(W)X 600Mm(D) X 1800 Mm(H) Cabinet: Freestanding Sheet-Steel Storage Cabinets With Lockable Doors (Shutters) And Adjustable Shelves. Material: High Yield Strength Cold-Rolled Low-Carbon Steel With All Sheet Components Shall Be Cold-Rolled Close-Annealed (Crca) Steel. Sheet Thickness: Major Panels: 0.7 Mm, False Side Panel: 0.9 Mm., Bottom Shelf: 0.8 Mm, Door (Shutter) Panels 0.8Mm, Vertical Shutter Handle Sections: 1.2 Mm. Door: The Cabinet Shall Have Two Hinged Doors. Doors Shall Close Flush, With An Even Gap Not Exceeding 3 Mm Along All Edges. Minimum 4 No. Hinges Per Door, Concealed Or Heavy-Duty Pin-Type Steel Hinges. Additional One Door Shall Be Provided In Case The Width Is More Than 1M. Internal Configuration: Adjustable Shelves In Addition To The Fixed Bottom Shelf, Subject To Confirmation Of The Approved Product Configuration. Shelf Positions Shall Be Adjustable On A Vertical Pitch Of 25 Mm, With Positive-Locking Shelf Supports That Cannot Be Dislodged By Normal Use Or Accidental Upward Movement. Shelf Load Capacity: Maximum Uniformly Distributed Load Of 80 Kg Per Shelf, Subject To Manufacturers Test Certification. Locking: 10-Lever Cam Lock With Lock-Lever Mechanism For Secure Locking Of The Shutters.Key Operated. 2 No. Keys Set. Levelers: Screw-Type Levelers With Hexagonal Plastic Bases, Providing A Minimum Additional Unit Height Of 8 Mm And Up To 5 Mm Further Height Adjustment. Finish: Epoxy-Polyester Powder Coating With A Dry-Film Thickness Of 50 ± 10 Microns. Colour: To Be Approved By Employer. Approved Make: Godrej/ Geeken/ Featherlite/ Herman Miller/ Steelcase , Cabinet Overall Dimensions 900Mm(W)X 600Mm(D) X 1800 Mm(H) Cabinet: Freestanding Sheet-Steel Storage Cabinets With Lockable Doors (Shutters) And Adjustable Shelves. Material: High Yield Strength Cold-Rolled Low-Carbon Steel With All Sheet Components Shall Be Cold-Rolled Close-Annealed (Crca) Steel. Sheet Thickness: Major Panels: 0.7 Mm, False Side Panel: 0.9 Mm., Bottom Shelf: 0.8 Mm, Door (Shutter) Panels 0.8Mm, Vertical Shutter Handle Sections: 1.2 Mm. Door: The Cabinet Shall Have Two Hinged Doors. Doors Shall Close Flush, With An Even Gap Not Exceeding 3 Mm Along All Edges. Minimum 4 No. Hinges Per Door, Concealed Or Heavy-Duty Pin-Type Steel Hinges. Additional One Door Shall Be Provided In Case The Width Is More Than 1M. Internal Configuration: Adjustable Shelves In Addition To The Fixed Bottom Shelf, Subject To Confirmation Of The Approved Product Configuration. Shelf Positions Shall Be Adjustable On A Vertical Pitch Of 25 Mm, With Positive-Locking Shelf Supports That Cannot Be Dislodged By Normal Use Or Accidental Upward Movement. Shelf Load Capacity: Maximum Uniformly Distributed Load Of 80 Kg Per Shelf, Subject To Manufacturers Test Certification. Locking: 10-Lever Cam Lock With Lock-Lever Mechanism For Secure Locking Of The Shutters.Key Operated. 2 No. Keys Set. Levelers: Screw-Type Levelers With Hexagonal Plastic Bases, Providing A Minimum Additional Unit Height Of 8 Mm And Up To 5 Mm Further Height Adjustment. Finish: Epoxy-Polyester Powder Coating With A Dry-Film Thickness Of 50 ± 10 Microns. Colour: To Be Approved By Employer. Approved Make: Godrej/ Geeken/ Featherlite/ Herman Miller/ Steelcase , Cabinet Overall Dimensions 600Mm(W)X 600Mm(D) X 1800 Mm(H) Cabinet: Freestanding Sheet-Steel Storage Cabinets With Lockable Doors (Shutters) And Adjustable Shelves. Material: High Yield Strength Cold-Rolled Low-Carbon Steel With All Sheet Components Shall Be Cold-Rolled Close-Annealed (Crca) Steel. Sheet Thickness: Major Panels: 0.7 Mm, False Side Panel: 0.9 Mm., Bottom Shelf: 0.8 Mm, Door (Shutter) Panels 0.8Mm, Vertical Shutter Handle Sections: 1.2 Mm. Door: The Cabinet Shall Have Two Hinged Doors. Doors Shall Close Flush, With An Even Gap Not Exceeding 3 Mm Along All Edges. Minimum 4 No. Hinges Per Door, Concealed Or Heavy-Duty Pin-Type Steel Hinges. Additional One Door Shall Be Provided In Case The Width Is More Than 1M. Internal Configuration: Adjustable Shelves In Addition To The Fixed Bottom Shelf, Subject To Confirmation Of The Approved Product Configuration. Shelf Positions Shall Be Adjustable On A Vertical Pitch Of 25 Mm, With Positive-Locking Shelf Supports That Cannot Be Dislodged By Normal Use Or Accidental Upward Movement. Shelf Load Capacity: Maximum Uniformly Distributed Load Of 80 Kg Per Shelf, Subject To Manufacturers Test Certification. Locking: 10-Lever Cam Lock With Lock-Lever Mechanism For Secure Locking Of The Shutters.Key Operated. 2 No. Keys Set. Levelers: Screw-Type Levelers With Hexagonal Plastic Bases, Providing A Minimum Additional Unit Height Of 8 Mm And Up To 5 Mm Further Height Adjustment. Finish: Epoxy-Polyester Powder Coating With A Dry-Film Thickness Of 50 ± 10 Microns. Colour: To Be Approved By Employer. Approved Make: Godrej/ Geeken/ Featherlite/ Herman Miller/ Steelcase , Locker Room Bench 2100X450x560 Locker Room Bench With Wooden Slatted Top Type: Heavy-Duty Locker Room Bench With A Slatted Wooden Seat And Rigid Metal Frame. Overall Dimensions: Approximately 2100 Mm (L) × 560 Mm (W) × 450 Mm (H). Seat Top: Made Of Seasoned, Kiln-Dried Hardwood Timber Slats, Securely Fixed To The Supporting Frame. Slats Shall Have Smooth, Rounded Edges, A Uniform Finish And Adequate Spacing For Ventilation And Drainage. Timber Shall Be Free From Cracks, Warping, Decay And Defects. Wooden Slats: Sanded Smooth And Finished With Clear Protective Wood Coating Or Suitable Water-Resistant Varnish. Frame: Heavy-Duty Ms Square Hollow-Section Steel Frame, Fabricated With Welded Joints And Adequate Cross-Bracing To Ensure Rigidity, Stability And Resistance To Wobbling Under Normal Use. Steel Sections: Minimum 40 × 40 × 2.0 Mm Ms Square Hollow Sections For Legs And Main Structural Members, With Suitable Intermediate Supports. Metal Frame: Pretreated For Corrosion Resistance And Finished With Epoxy-Polyester Powder Coating, Minimum 50 Microns Dry-Film Thickness. Assembly And Fixing: Timber Slats Shall Be Securely Fastened To The Metal Frame Using Corrosion-Resistant Screws Or Bolts. All Exposed Fasteners Shall Be Properly Finished, With No Sharp Edges Or Projections. Stability And Safety: The Bench Shall Have A Stable, Non-Rocking Structure, Suitable Cross-Members And Protective Floor-Contact Caps. All Corners And Edges Shall Be Smooth And Safe For Users. Load Capacity: Minimum Uniformly Distributed Load Capacity Of 250 Kg. Workmanship: The Bench Shall Be Free From Burrs, Sharp Edges, Welding Defects, Loose Joints And Uneven Finishing. , Large Tables (Conference) 4000 (L) X1100 (W) X750 (H) Mm Table Top: The Core Shall Be Of Minimum Thickness 38 Mm (Finished Thickness Not Less Than 38 Mm, Including Surface Laminate). The Core Shall Be Of E1 Formaldehyde Class, Free From Voids, Delamination And Moisture Damage. The Top Shall Be Finished With [High-Pressure Laminate (Hpl), Minimum 1.0 Mm / Melamine-Faced Board / Natural Veneer With Pu Lacquer] On The Upper Surface, And A Balancing Laminate 0.7Mm On The Underside. The Surface Shall Be Scratch, Abrasion And Heat Resistant, Non-Reflective, Matt Or Low Gloss. Minimum 2 Desk Grommets With Covers Shall Be Provided On The Tabletop For Cable Routing. Minimum 3 Electrical Power Sockets With Switches Shall Be Provided, Suitably Integrated Into The Desk. Provision Shall Be Made For Voice/Telephone And Data Connectivity Points, As Required. All Fittings Shall Be Neatly Installed, Safe And Suitable For Office Use. Structure: Use Stiffening Rails, Torsion Box Or An Under-Frame, To Control Top Deflection. The Under-Frame And Legs Shall Be Of Mild Steel Tubes, Steel Tube Legs And Rails- 1.6Mm Wall Thickness, Sheet-Steel Panel Legs 1.2Mm Wall Thickness, Top Mounting Plates And Brackets 2Mm Wall Thickness. All Metal Parts Shall Be Painted With Epoxy-Polyester Powder Coating, Oven-Cured. Clearance: Minimum Knee Clearance Of 620 Mm. Polypropylene Buffers Fitted At Bottom Under Each Leg For Making The Floor Scratch Resistant. The Fitting Will Be Kd Fittings Format Like Minifix And Barrelnut. Pvc Edge Banding: Matching 2 Mm Thick Pvc Edge Banding On Exposed Tabletop Edges And All Other Surface Of Plywood Shall Have 0.8Mm Pvc Edge Banding. Edge Banding With Hot Pasted Edge Banding Machine. Corners Radiused, No Visible Glue Line. Workmanship: The Table Shall Be Rigid, Level, Stable And Free From Wobbling, Delamination And Loose Joints. Plywood: Archidply/ Century Ply/Green Ply. Laminates: Archidlam/ Century / Greenlam/ Merino Hardware: Hettich/ Yale / Doorset/ Hafele/ Ebco. Approval: Physical Samples Of Plywood, Design, Laminate, Color And Finished Wood To Be Approved Before Production. , Large Tables -1500 (L) X750 (W)X750 (H) Table Top: The Core Shall Be Of Minimum Thickness 38 Mm (Finished Thickness Not Less Than 38 Mm, Including Surface Laminate). The Core Shall Be Of E1 Formaldehyde Class, Free From Voids, Delamination And Moisture Damage. The Top Shall Be Finished With [High-Pressure Laminate (Hpl), Minimum 1.0 Mm / Melamine-Faced Board / Natural Veneer With Pu Lacquer] On The Upper Surface, And A Balancing Laminate 0.7Mm On The Underside. The Surface Shall Be Scratch, Abrasion And Heat Resistant, Non-Reflective, Matt Or Low Gloss. Minimum 2 Desk Grommets With Covers Shall Be Provided On The Tabletop For Cable Routing. Minimum 3 Electrical Power Sockets With Switches Shall Be Provided, Suitably Integrated Into The Desk. Provision Shall Be Made For Voice/Telephone And Data Connectivity Points, As Required. All Fittings Shall Be Neatly Installed, Safe And Suitable For Office Use. Structure: Use Stiffening Rails, Torsion Box Or An Under-Frame, To Control Top Deflection. The Under-Frame And Legs Shall Be Of Mild Steel Tubes, Steel Tube Legs And Rails- 1.6Mm Wall Thickness, Sheet-Steel Panel Legs 1.2Mm Wall Thickness, Top Mounting Plates And Brackets 2Mm Wall Thickness. All Metal Parts Shall Be Painted With Epoxy-Polyester Powder Coating, Oven-Cured. Clearance: Minimum Knee Clearance Of 620 Mm. Polypropylene Buffers Fitted At Bottom Under Each Leg For Making The Floor Scratch Resistant. The Fitting Will Be Kd Fittings Format Like Minifix And Barrelnut. Pvc Edge Banding: Matching 2 Mm Thick Pvc Edge Banding On Exposed Tabletop Edges And All Other Surface Of Plywood Shall Have 0.8Mm Pvc Edge Banding. Edge Banding With Hot Pasted Edge Banding Machine. Corners Radiused, No Visible Glue Line. Workmanship: The Table Shall Be Rigid, Level, Stable And Free From Wobbling, Delamination And Loose Joints. Plywood: Archidply/ Century Ply/Green Ply. Laminates: Archidlam/ Century / Greenlam/ Merino Hardware: Hettich/ Yale / Doorset/ Hafele/ Ebco. Approval: Physical Samples Of Plywood, Design, Laminate, Color And Finished Wood To Be Approved Before Production. , Large Tables (Conference)-1200 (L) X1200 (W) X750 (H) Table Top: The Core Shall Be Of Minimum Thickness 38 Mm (Finished Thickness Not Less Than 38 Mm, Including Surface Laminate). The Core Shall Be Of E1 Formaldehyde Class, Free From Voids, Delamination And Moisture Damage. The Top Shall Be Finished With [High-Pressure Laminate (Hpl), Minimum 1.0 Mm / Melamine-Faced Board / Natural Veneer With Pu Lacquer] On The Upper Surface, And A Balancing Laminate 0.7Mm On The Underside. The Surface Shall Be Scratch, Abrasion And Heat Resistant, Non-Reflective, Matt Or Low Gloss. Minimum 2 Desk Grommets With Covers Shall Be Provided On The Tabletop For Cable Routing. Minimum 3 Electrical Power Sockets With Switches Shall Be Provided, Suitably Integrated Into The Desk. Provision Shall Be Made For Voice/Telephone And Data Connectivity Points, As Required. All Fittings Shall Be Neatly Installed, Safe And Suitable For Office Use. Structure: Use Stiffening Rails, Torsion Box Or An Under-Frame, To Control Top Deflection. The Under-Frame And Legs Shall Be Of Mild Steel Tubes, Steel Tube Legs And Rails- 1.6Mm Wall Thickness, Sheet-Steel Panel Legs 1.2Mm Wall Thickness, Top Mounting Plates And Brackets 2Mm Wall Thickness. All Metal Parts Shall Be Painted With Epoxy-Polyester Powder Coating, Oven-Cured. Clearance: Minimum Knee Clearance Of 620 Mm. Polypropylene Buffers Fitted At Bottom Under Each Leg For Making The Floor Scratch Resistant. The Fitting Will Be Kd Fittings Format Like Minifix And Barrelnut. Pvc Edge Banding: Matching 2 Mm Thick Pvc Edge Banding On Exposed Tabletop Edges And All Other Surface Of Plywood Shall Have 0.8Mm Pvc Edge Banding. Edge Banding With Hot Pasted Edge Banding Machine. Corners Radiused, No Visible Glue Line. Workmanship: The Table Shall Be Rigid, Level, Stable And Free From Wobbling, Delamination And Loose Joints. Plywood: Archidply/ Century Ply/Green Ply. Laminates: Archidlam/ Century / Greenlam/ Merino Hardware: Hettich/ Yale / Doorset/ Hafele/ Ebco. Approval: Physical Samples Of Plywood, Design, Laminate, Color And Finished Wood To Be Approved Before Production.
BOQ
| Sl. No. | Item Description |
| 1 | Estimate for Residual Hostel Furniture |
| 2 | Tea poy/Centre tableOverall Dimensions (W × D × H): 1200mm × 600mm × 450 mm.Table Top: 18mm thick BWP plywood (IS 303 BWP Grade 15 Yrs Warranty) with hot pressed 1mm decorative laminate on top and 0.7mm white laminate underneath. Both laminates shall be factory pressed and bonded, and conform to IS 2046. The table should be adequately reinforced from the underside using suitable structural members to avoid sagging. PVC Edge Banding: Matching 2 mm thick PVC edge banding on exposed tabletop edges with hot pasted Edge Banding Machine. Corners radiused, no visible glue line.Leg: Sturdy, stable support structure made of seasoned hardwood or teakwood 60mm x 60mm with side frame of 70 mm X 25 mm. Polypropylene buffers fitted at bottom under each leg for making the floor scratch resistant. All exposed wood surface of the table will be PU polish. Surface Quality: Smooth, scratch-resistant, moisture-resistant and easy-to-clean finish, with no sharp edges or visible manufacturing defects.Workmanship: The table shall be rigid, level, stable and free from wobbling, delamination and loose joints.Plywood : ARCHIDPLY/ CENTURY PLY/GREEN Ply. Laminates: Archidlam/ Century / Greenlam/ MerinoApproval: Physical samples of plywood, laminate, color and finished wood to be approved before production. |
| 3 | Study TableOverall Dimensions (W × D × H): 1200mm × 600mm × 750 mm.Table Top: 38mm thick table top with18mm thick BWP plywood (IS 303 BWP Grade,15 Yrs Warranty). Modesty panel on the back side with size of 1200 mm x 600 mm with 18mm thick BWP Plywood. Desk grommet on top. The table should be adequately reinforced from the underside using suitable structural members to avoid sagging. Sides: Sturdy, stable support structure made of 18mm thick BWP Plywood. Polypropylene buffers fitted at bottom under each leg for making the floor scratch resistant. The fitting will be KD fittings format like Minifix and barrelnut.Laminates: Hot pressed 1mm decorative laminate on top and outer surfaces and 0.7mm white laminate on other surfaces. Both laminates shall be factory pressed and bonded, and conform to IS 2046. PVC Edge Banding: Matching 2 mm thick PVC edge banding on exposed tabletop edges and all other surface of plywood shall have 0.8mm PVC edge banding. Edge banding with hot pasted Edge Banding Machine. Corners radiused, no visible glue line.Surface Quality: Smooth, scratch-resistant, moisture-resistant and easy-to-clean finish, with no sharp edges or visible manufacturing defects.Workmanship: The table shall be rigid, level, stable and free from wobbling, delamination and loose joints.Plywood: ARCHIDPLY/ CENTURY PLY/GREEN Ply. Laminates: Archidlam/ Century / Greenlam/ MerinoApproval: Physical samples of plywood, laminate, color and finished wood to be approved before production. |
| 4 | 3 Seated Steel chairsSize: 1800mm(L)X 650mm(D)X 950mm(H), Seating Height 450mm, Load Capacity- 150 Kg per seat. Require compliance with IS 17632:2022 and applicable strength and stability tests.Seat Size: 500mm width x 450mm Depth, Back Size: 500mm Width x 500 mm HeightMain Frame: Rectangular Mild Steel (M.S.) Electric Resistance Welded (ERW) tubes of nominal size 80 × 40 mm, minimum wall thickness 2.0 mm. Durable powder-coated finish.Seat and Backrest Shell: Fabricated from CRCA Steel sheet of minimum thickness 1.5 mm, with perforations and formed edges as per the approved design. Powder coated finish.Side Bars: Solid steel sections of the approved cross-sectional dimensions, with a chrome-plated finish. Fluting, end finishing and compatible plastic inserts shall be provided as per the approved design.Assembly and Fasteners: The seat shells shall be securely fixed to the brackets and crossbeam using M8 bolts or equivalent corrosion-resistant fasteners. The number, size and arrangement of fasteners shall be as per the approved manufacturer's assembly drawing and shall ensure adequate rigidity and stability under intended service conditions.Floor Protectors: Durable, non-marking polypropylene or equivalent buffers shall be fitted to all floor-contact points to prevent scratching and damage to the flooring.Workmanship and Finish: All components shall be free from sharp edges, burrs, cracks, defective welds and visible surface defects. The completed chair shall be stable, rigid, corrosion-resistant and suitable for continuous use.Approval and Testing: The supplier shall submit dimensional drawings, material specifications and finish details for approval. The assembled chair shall meet the applicable requirements for structural stability, strength and durability. The product should be corrosion free.Gross Weight : 30 Kg approx. |
| 5 | 4 Lined Steel cushion ChairSupply & Installation of 4 Leg CHAIRSupply and installation of item size SEAT ASSEMBLY: The seat assembly should be made up of 1.2 ±0.lcm. thick hot-pressed plywood , upholstered with fabric upholstery covers and moulded Polyurethane foam. SEAT SIZE: 47 .0 cm. (W) x 48.0 cm. (.D)BACK ASSEMBLY: The back assembly. should be made of powder coated (OFT 40-60 microns) tubular frame of O 2.54 ±0.03cm. x 0.2 ±0.016cm.thk. MS ERW tube designed with contoured lumbar support for extra comfort. The back should be upholstered using double layer spacer mesh fabric with high tenacity yarn.BACK SIZE : 46.5 cm. (W) x 60.5cm. (H)HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam should be moulded with density =45+/-2 kg/m3 and hardness load 16 ± 2 kgf for 25% compression.ARMRESTS: The one-piece armrests should be injection moulded from black Co-polymer Polypropylene.TUBULAR FRAME: The powder coated (OFT 40-60.microns) tubular frame should be cantilever type & made of (62.54 ±0.03cm. x 0.2 ±0.016cm thick M.S.E.R.W. Tube.The Chair seat should be provided in 2 Colours (Red & Blue)Approved Make: Godrej/ Geeken/ Featherlite/ Herman Miller/ Steelcase |
| 6 | Computer Table 3'x2'Overall Dimensions (W × D × H): 900 × 600 × 750 mm.One drawer with open storage for CPU, 1 small drawer and Key board tray with Telescopic channel. Table Top: 38mm thick table top with18mm thick BWP plywood (IS 303 BWP Grade,15 Yrs Warranty). Modesty panel on the back side with size of 900 mm x 400 mm with 18mm thick BWP Plywood. Desk grommet on top. 2 No. drawer and 1 CPU storage unit with ventilation. Locking arrangements for drawer. The table should be adequately reinforced from the underside using suitable structural members to avoid sagging. Telescopic Channel & Handles: Rust Free. Full extension, Ball-bearing Heavy Duty telescopic drawer channel, 450 mm nominal length, zinc-plated/powder-coated, minimum load rating 35 kg, fabricated from cold-rolled steel with a minimum sheet thickness of 1.2 mm, 50,000 open/close cycles per manufacturer’s test report. Chromium plated durable handles, size and sample approval from Employer. Sides: Sturdy, stable support structure made of 18mm thick BWP Plywood. Polypropylene buffers fitted at bottom under each leg for making the floor scratch resistant. The fitting will be KD fittings format like Minifix and barrelnut.Laminates: Hot pressed 1mm decorative laminate on top and outer surfaces and 0.7mm white laminate on other surfaces. Both laminates shall be factory pressed and bonded, and conform to IS 2046. PVC Edge Banding: Matching 2 mm thick PVC edge banding on exposed tabletop edges and all other surface of plywood shall have 0.8mm PVC edge banding. Edge banding with hot pasted Edge Banding Machine. Corners radiused, no visible glue line.Surface Quality: Smooth, scratch-resistant, moisture-resistant and easy-to-clean finish, with no sharp edges or visible manufacturing defects.Workmanship: The table shall be rigid, level, stable and free from wobbling, delamination and loose joints.Plywood: ARCHIDPLY/ CENTURY PLY/GREEN PLY. Laminates: Archidlam/ Century / Greenlam/ MerinoHardware: Hettich/ Yale / Doorset/ Hafele/ ebco. Approval: Physical samples of plywood, laminate, color and finished wood to be approved before production. |
| 7 | Locker Cabinet 20 Locker in Each Steel Locker with Locks (20 Locker set (5 Column & 4 Row) will be 1 Unit)Overall Dimensions: 1875 mm (W) × 470 mm (D) × 1950 mm (H) each stack including levelers, as per approved manufacturer drawings. Each Locke Size: 450mm Height 375mm Width x 470mm Depth. Corrosion Free.Construction: Aesthetically appealing, completely knock-down modular construction. Screw-type adjustable levelers with a nominal height of 50 mm and an adjustment range of 15 mm, as per manufacturer's design.Material and Body: Fabricated from cold-rolled close-annealed (CRCA) steel sheet of minimum 0.5 mm nominal thickness, with suitable formed edges and stiffeners. Top and bottom stiffeners shall be fabricated from 1.2 mm nominal-thickness CRCA steel sheet. The manufacturer shall ensure adequate rigidity and stability of the assembled locker under normal intended use.Doors: Fabricated from 0.6 mm nominal-thickness CRCA steel sheet, suitably formed and stiffened to prevent undue bending during normal operation. Soft-closing hinges shall be provided. Door dimensions and formed depth shall conform to the approved manufacturer's drawing.Shelves: Fabricated from 0.5 mm nominal-thickness CRCA steel sheet, with suitably formed bends for rigidity. Load capacity of 20 kg. Locking System: Conventional lock and key arrangements. 2 No. Keys.Surface Finish: All steel components shall undergo suitable surface preparation and pretreatment before application of epoxy-polyester powder coating. The coating shall have a minimum dry-film thickness of 50 microns, with uniform coverage and no visible defects.Workmanship: All edges shall be properly deburred and finished. The locker shall be free from sharp edges, defective welds, loose joints, coating defects and misaligned doors. Doors shall open and close smoothly, and the assembled unit shall be stable and level. |
| 8 | TableOverall Dimensions (W × D × H): 1200 × 600 × 750 mm.Table Top: 38mm thick table top with18mm thick BWP plywood (IS 303 BWP Grade,15 Yrs Warranty). Modesty panel on the back side with size of 1200 mm x 600 mm with 18mm thick BWP Plywood. Desk grommet on top. The table should be adequately reinforced from the underside using suitable structural members to avoid sagging. Sides: Sturdy, stable support structure made of 18mm thick BWP Plywood. Polypropylene buffers fitted at bottom under each leg for making the floor scratch resistant. The fitting will be KD fittings format like Minifix and barrelnut. 1 No. Drawer for storage. Telescopic Channel & Handles: Rust Free. Full extension, Ball-bearing Heavy Duty telescopic drawer channel, 450 mm nominal length, zinc-plated/powder-coated, minimum load rating 35 kg, fabricated from cold-rolled steel with a minimum sheet thickness of 1.2 mm, 50,000 open/close cycles per manufacturer’s test report. Chromium plated durable handles, size and sample approval from Employer. Laminates: Hot pressed 1mm decorative laminate on top and outer surfaces and 0.7mm white laminate on other surfaces. Both laminates shall be factory pressed and bonded, and conform to IS 2046. PVC Edge Banding: Matching 2 mm thick PVC edge banding on exposed tabletop edges and all other surface of plywood shall have 0.8mm PVC edge banding. Edge banding with hot pasted Edge Banding Machine. Corners radiused, no visible glue line.Surface Quality: Smooth, scratch-resistant, moisture-resistant and easy-to-clean finish, with no sharp edges or visible manufacturing defects.Workmanship: The table shall be rigid, level, stable and free from wobbling, delamination and loose joints.Plywood: ARCHIDPLY/ CENTURY PLY/GREEN Ply. Laminates: Archidlam/ Century / Greenlam/ MerinoHardware: Hettich/ Yale / Doorset/ Hafele/ ebco. Approval: Physical samples of plywood, laminate, color and finished wood to be approved before production. |
| 9 | Security Room/ Supervisor Room etc. |
| 10 | BedSupply & Installation of Single Bed with StorageBed Size: 2050mm Length, 955mm Width and 430mm height, Side Thickness 20mm.Headboard: 955mm width & 940 mm Height, thickness 38mmFoot-board: 955mm width & 470 mm Height, thickness 38mmStorage: Single Horizontal partition, Top open box storage length= 1990mm (995 x 2), Box storage depth= 320 mm, 3 Hinges and 2 handles. Bed rest and floor rest will have 18mm ply with laminates in both sides and every part of the bed. The lower base and upper base of the bed will have 12 mm thick BWP plywood with laminate on top surface.18 mm thick BWP plywood with 15 years warranty with all external visible surface factory pasted laminate with 1.5mm thick and inside surface 0.70 mm thick white laminate factory pasted. 2mm PVC edge banding on headboard and footboard with corner rounding in the exposed edges with through feed edge banding machine with help of hot melt glue above 200 degree Celsius. 0.8mm edge banding on all other surface of Plywood with edge corner rounding through feed edge banding machine with help of hot melt glue above 200 degree Celsius.Mosquito net stand ¾”M.S pipe of 2mm thickness. Plywood: ARCHIDPLY/ CENTURY PLY/GREEN Ply. Laminates: Archidlam/ Century / Greenlam/ MerinoHardware: Hettich/ Yale / Doorset/ Hafele/ ebco. Fixing shall be made with bed jointers of heavy-duty BIS marked to make the bed modular. There shall be Polypropylene buffers fitted for making the floor scratch resistant. The fittings will be KD Fittings format like minifix and barrelnut. The side joint with headboard and foot board must have 75mm L Corner. |
| 11 | Mattress(The dimension of Mattress should be in line with the bed size as mentioned above)Number of Layers-Two Layers, Thickness of Core Layer} - 50mm, Thickness of Core Layer2 - 50mm, Material of Core Layer: PU Foam, Material of Core Layer2: PU Foam, Quilting : Both side Quilting (Double Sided), Thickness of Quilting:8mm, Fabric Composition:Polyester, Construction: Woven, Fabric Mass :80g/m2, Core Layer I Density : 32 kg/m3, Core Layer 2 Density : 32 Kg/m3 .Compression Set for PU Foam : 10%,Durability test for Complete mattress: Loss of height not more than 13mm.Resistance to Ageing for PU Foam as per IS 7888 latest: Shall meet the requirement of IS 7933 Latest. Durability Test for PU Foam as per IS 7888 latest: Shall meet the requirement of IS 7933 Latest. Durability Test for Complete Mattress: Loss of height not more than 13mm as per ASTM 1566. Test report to be furnished.Approved Makes: Sleepwell/ Duro flex/Kurl-On/ Godrej/ Flo Mattress |
| 12 | PillowConforming to Standards: DGQA Prov Specn No. S/1706/Synthetic Pillow/ TC-6Length: 700mm, Width: 400mm, Height of Pillow At Centre 170mmBody Fabric: Cloth plain weave Polyester cotton (67:33) whiteEnds per cm: 40, Picks per cm: 30Body fabric mass (g/sqm): 110Filling Material: Hollow siliconized polyester fibre of 7 DenierMass of filling material (g): 625Total mass of synthetic pillow (g): 715Reinforcing/ Piping: Shroud laid cotton line of 2 mm diaAvailability of Test Report from designated AHSP,NABL/ ILAC accredited or Central Government Lab to prove conformity of products to the specification |
| 13 | TableSupply & Installation of TableLength= 1200 mm, Width= 600 mm, Height= 750 mmOne Drawer and one Storage with adjustable, Modesty panel on the back side with size of 1200 mm x 375mm and a Foot Rest in the Bottom size 820mm x 100 mm.Drawer Facia 420mm x 150mm with 450mm Telescopic channel & Storage Facia: 420mm x 460mmMagnetic close auto hinges chrome coated and locking arrangements, Hole with Grommet for cable management. Top of the Table will be 38 mm thick, Side of the Table will be 25 mm thick and Drawer Bottom will be 6mm thick. All the other parts of the table will be made from 18 mm PLY.18 mm thick BWP plywood with 15 years warranty with all external visible surface factory pasted laminate with 1.5mm thick and inside surface 0.70 mm thick white laminate factory pasted. 2mm PVC edge banding on top surface with corner rounding in the exposed edges with through feed edge banding machine with help of hot melt glue above 200 degree Celsius. 0.8mm edge banding on all other surface of Plywood with edge corner rounding through feed edge banding machine with help of hot melt glue above 200 degree Celsius. Chromium plated durable handles, size and sample approval from Employer.Telescopic Channel & Handles: Rust Free. Full extension, Ball-bearing Heavy Duty telescopic drawer channel, 450 mm nominal length, zinc-plated/powder-coated, minimum load rating 35 kg, fabricated from cold-rolled steel with a minimum sheet thickness of 1.2 mm, 50,000 open/close cycles per manufacturer’s test report. Chromium plated durable handles, size and sample approval from Employer. Plywood: ARCHIDPLY/ CENTURY PLY/GREEN Ply. Laminates: Archidlam/ Century / Greenlam/ MerinoHardware: Hettich/ Yale / Doorset/ Hafele/ ebco. There shall be Polypropylene buffers fitted for making the floor scratch resistant. The fittings will be KD Fittings format like minifix and barrelnut. |
| 14 | ChairSupply & Installation of 4 Leg CHAIRSupply and installation of item size SEAT ASSEMBLY: The seat assembly should be made up of 1.2 ±0.lcm. thick hot-pressed plywood , upholstered with fabric upholstery covers and moulded Polyurethane foam. SEAT SIZE: 47 .0 cm. (W) x 48.0 cm. (.D)BACK ASSEMBLY: The back assembly. should be made of powder coated (DFT 40-60 microns) tubular frame of O 2.54 ±0.03cm. x 0.2 ±0.016cm.thk. MS ERW tube designed with contoured lumbar support for extra comfort. The back should be upholstered using double layer spacer mesh fabric with high tenacity yarn.BACK SIZE : 46.5 cm. (W) x 60.5cm. (H)HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam should be moulded with density =45+/-2 kg/m3 and hardness load 16 ± 2 kgf for 25% compression.ARMRESTS: The one-piece armrests should be injection moulded from black Co-polymer Polypropylene.TUBULAR FRAME: The powder coated (DFT 40-60.microns) tubular frame should be cantilever type & made of (O2.54 ±0.03cm. x 0.2 ±0.016cm thick M.S.E.R.W. Tube.The Chair seat should be provided in 2 Colours (Red & Blue)Approved Make: Godrej/ Geeken/ Featherlite/ Herman Miller/ Steelcase |
| 15 | Storage CabinetOverall Dimensions (W × D × H): 900mm × 450mm × 1200 mm.There will be three Shelves with two handles and soft close auto hinges. Cabinet: Sturdy, stable support structure made of 18mm thick BWP plywood (IS 303 BWP Grade,15 Yrs Warranty) with 3 Shelves as per design. Polypropylene buffers fitted at bottom under for making the floor scratch resistant. The fitting will be KD fittings format like Minifix and barrelnut.Laminates: Hot pressed 1mm decorative laminate on top and outer surfaces and 0.7mm white laminate on other surfaces. Both laminates shall be factory pressed and bonded, and conform to IS 2046. PVC Edge Banding: Matching 2 mm thick PVC edge banding on exposed edges and all other surface of plywood shall have 0.8mm PVC edge banding. Edge banding with hot pasted Edge Banding Machine. Corners radiused, no visible glue line.Surface Quality: Smooth, scratch-resistant, moisture-resistant and easy-to-clean finish, with no sharp edges or visible manufacturing defects.Handles: Rust Free. Chromium plated durable handles, size and sample approval from Employer. Workmanship: The cabinet shall be rigid, level, stable and free from wobbling, delamination and loose joints.Plywood: ARCHIDPLY/ CENTURY PLY/GREEN Ply. Laminates: Archidlam/ Century / Greenlam/ MerinoHardware: Hettich/ Yale / Doorset/ Hafele/ ebco. Approval: Physical samples of plywood, laminate, color and finished wood to be approved before production. |
| 16 | Non-Medical Furniture |
| 17 | Square StoolOverall Dimensions: 411 mm (L) × 411 mm (W) × 522 mm (H).Top: The top shall be fabricated from SS 304 stainless-steel sheet of 1.2mm thickness, with a uniform buffed matte finish. Corrosion free stool.Frame: The supporting frame shall be fabricated from mild-steel square hollow sections of 25 × 25 mm size and 2 mm wall thickness. All joints shall be securely welded, finished smooth and free from sharp edges, burrs and visible welding defects.Surface Finish: All mild-steel components shall undergo suitable surface pretreatment and shall be finished with thermosetting epoxy-polyester powder coating in the approved RAL White colour.Floor Protection: Neoprene shoes shall be provided at the base to protect the floor.Plastic and Rubber Components: All exposed plastic and rubber components shall be Grey in colour.Load Capacity: Safe working load of 135 kg, supported by manufacturer documentation or a suitable test report demonstrating structural stability and load-bearing performance. |
| 18 | Sofa 2 SeaterOverall Dimensions: 1400 mm (W) × 900 mm (D) × 850 mm (H), with a seat height of 450 mm measured from the top of the uncompressed seat cushion.Seat & Back Cushion: Cushion shall consist of PU foam of density 28 ± 2 kg/m³, with an additional top layer of supersoft PU foam of density 32 ± 2 kg/m³. The seat cushion shall be upholstered with good-quality, durable upholstery fabric, uniformly stretched and properly secured, ensuring a wrinkle-free finish.Fabric: The sofa shall be upholstered with premium-quality, durable, colourfast and abrasion-resistant fabric suitable for regular institutional/commercial use. The fabric shall have uniform texture, colour and finish, free from stains, tears, defects or other visible imperfections. The fabric shall be securely stitched and fixed to the sofa frame, with neatly finished seams and edges. The colour and pattern of the fabric shall be subject to approval of the Employer before execution.Under structure: The main structural frame of the sofa shall be made of seasoned solid hardwood of suitable cross-sections, free from major knots, cracks, warping and other structural defects, ensuring adequate strength, rigidity and durability. 18mm thick BWP Plywood shall be used if required. All wooden components shall be properly joined and securely assembled to ensure structural stability.The seat support shall comprise a rigid, adequately reinforced plywood base securely fixed to the solid wooden frame. High-resilience PU foam cushioning shall be provided over the base to ensure adequate seating comfort, strength and durability. The construction shall be free from sagging, abnormal noise or deformation during normal use.Legs: wooden leg assembly.Color will be approved by the Employer before production. |
| 19 | Sofa 3 SeaterOverall Dimensions: 2000 mm (W) × 900 mm (D) × 850 mm (H), with a seat height of 450 mm measured from the top of the uncompressed seat cushion.Seat & Back Cushion: Cushion shall consist of PU foam of density 28 ± 2 kg/m³, with an additional top layer of supersoft PU foam of density 32 ± 2 kg/m³. The seat cushion shall be upholstered with good-quality, durable upholstery fabric, uniformly stretched and properly secured, ensuring a wrinkle-free finish.Fabric: The sofa shall be upholstered with premium-quality, durable, colourfast and abrasion-resistant fabric suitable for regular institutional/commercial use. The fabric shall have uniform texture, colour and finish, free from stains, tears, defects or other visible imperfections. The fabric shall be securely stitched and fixed to the sofa frame, with neatly finished seams and edges. The colour and pattern of the fabric shall be subject to approval of the Employer before execution.Under structure: The main structural frame of the sofa shall be made of seasoned solid hardwood of suitable cross-sections, free from major knots, cracks, warping and other structural defects, ensuring adequate strength, rigidity and durability. 18mm thick BWP Plywood shall be used if required. All wooden components shall be properly joined and securely assembled to ensure structural stability.The seat support shall comprise a rigid, adequately reinforced plywood base securely fixed to the solid wooden frame. High-resilience PU foam cushioning shall be provided over the base to ensure adequate seating comfort, strength and durability. The construction shall be free from sagging, abnormal noise or deformation during normal use.Legs: wooden leg assembly.Color will be approved by the Employer before production. |
| 20 | Sofa 1 seaterOverall Dimensions: 900 mm (W) × 900 mm (D) × 850 mm (H), with a seat height of 450 mm measured from the top of the uncompressed seat cushion. Seat & Back Cushion: Cushion shall consist of PU foam of density 28 ± 2 kg/m³, with an additional top layer of supersoft PU foam of density 32 ± 2 kg/m³. The seat cushion shall be upholstered with good-quality, durable upholstery fabric, uniformly stretched and properly secured, ensuring a wrinkle-free finish.Fabric: The sofa shall be upholstered with premium-quality, durable, colourfast and abrasion-resistant fabric suitable for regular institutional/commercial use. The fabric shall have uniform texture, colour and finish, free from stains, tears, defects or other visible imperfections. The fabric shall be securely stitched and fixed to the sofa frame, with neatly finished seams and edges. The colour and pattern of the fabric shall be subject to approval of the Employer before execution.Under structure: The main structural frame of the sofa shall be made of seasoned solid hardwood of suitable cross-sections, free from major knots, cracks, warping and other structural defects, ensuring adequate strength, rigidity and durability. 18mm thick BWP Plywood shall be used if required. All wooden components shall be properly joined and securely assembled to ensure structural stability.The seat support shall comprise a rigid, adequately reinforced plywood base securely fixed to the solid wooden frame. High-resilience PU foam cushioning shall be provided over the base to ensure adequate seating comfort, strength and durability. The construction shall be free from sagging, abnormal noise or deformation during normal use.Legs: wooden leg assembly.Color will be approved by the Employer before production. |
| 21 | Executive ChairSEAT SIZE: 470 mm (W) × 500 mm (D). BACK SIZE: 450 mm (W) × 650 mm (H).High-back ergonomic revolving executive chair with cushioned seat upholstered in high-quality, durable fabric/leatherette and breathable mesh backrest. Seat shall be provided with high-resilience (HR) polyurethane foam of minimum density 45 ± 2 kg/m³ and hardness 16 ± 2 kgf at 25% compression, tested in accordance with IS 7888 with nylon base. The back shall consist of an injection-moulded glass-filled nylon frame upholstered with micro-mesh fabric made of high-tenacity yarn. The chair shall have adjustable lumbar support,neckrest, height-adjustable armrests, pneumatic seat-height adjustment, synchro-tilt mechanism with tilt-tension adjustment and multiple locking positions with anti-shock feature. The chair shall be fitted with a heavy-duty five-star pedestal made of reinforced glass-filled nylon or die-cast aluminium alloy, with five twin-wheel castors suitable for the intended flooring. The chair shall have a minimum user-weight capacity of 120 kg and comply with applicable office-chair strength, stability and durability standards.Approved Make: Godrej/ Geeken/ Featherlite/ Herman Miller/ Steelcase |
| 22 | Cabin Table with StorageSize: 1500 (W) x750 (D) x750 (H)Overall Dimensions (W × D × H): 1500 × 750 × 750 mm.Table Top: 38mm thick table top with18mm thick BWP plywood (IS 303 BWP Grade,15 Yrs Warranty). Modesty panel on the back side with size of 1500 mm x 600 mm with 18mm thick BWP Plywood. Desk grommet on top. The table should be adequately reinforced from the underside using suitable structural members to avoid sagging. Sides: Sturdy, stable support structure made of 18mm thick BWP Plywood. Polypropylene buffers fitted at bottom under each leg for making the floor scratch resistant. The fitting will be KD fittings format like Minifix and barrelnut. Drawer for storage with telescopic channel on one side only. Telescopic Channel & Handles: Rust Free. Full extension, Ball-bearing Heavy Duty telescopic drawer channel, 450 mm nominal length, zinc-plated/powder-coated, minimum load rating 35 kg, fabricated from cold-rolled steel with a minimum sheet thickness of 1.2 mm, 50,000 open/close cycles per manufacturer’s test report. Chromium plated durable handles, size and sample approval from Employer. Laminates: Hot pressed 1mm decorative laminate on top and outer surfaces and 0.7mm white laminate on other surfaces. Both laminates shall be factory pressed and bonded, and conform to IS 2046. PVC Edge Banding: Matching 2 mm thick PVC edge banding on exposed tabletop edges and all other surface of plywood shall have 0.8mm PVC edge banding. Edge banding with hot pasted Edge Banding Machine. Corners radiused, no visible glue line.Surface Quality: Smooth, scratch-resistant, moisture-resistant and easy-to-clean finish, with no sharp edges or visible manufacturing defects.Workmanship: The table shall be rigid, level, stable and free from wobbling, delamination and loose joints.Plywood: ARCHIDPLY/ CENTURY PLY/GREEN Ply. Laminates: Archidlam/ Century / Greenlam/ MerinoHardware: Hettich/ Yale / Doorset/ Hafele/ ebco. Approval: Physical samples of plywood, laminate, color and finished wood to be approved before production. |
| 23 | 3 Seater Visitors chairSize: 1800mm(L)X 650mm(D)X 950mm(H), Seating Height 450mm, Load Capacity- 150 Kg per seat.Seat Size: 500mm width x 450mm Depth, Back Size: 500mm Width x 500 mm HeightMain Frame: Rectangular Mild Steel (M.S.) Electric Resistance Welded (ERW) tubes of nominal size 80 × 40 mm, minimum wall thickness 2.0 mm. Durable powder-coated finish.Seat and Backrest Shell: Fabricated from cold-rolled Mild Steel sheet of minimum thickness 1.5 mm, with perforations and formed edges as per the approved design. Powder coated finish.Side Bars: Solid steel sections of the approved cross-sectional dimensions, with a chrome-plated finish. Fluting, end finishing and compatible plastic inserts shall be provided as per the approved design.Assembly and Fasteners: The seat shells shall be securely fixed to the brackets and crossbeam using M8 bolts or equivalent corrosion-resistant fasteners. The number, size and arrangement of fasteners shall be as per the approved manufacturer's assembly drawing and shall ensure adequate rigidity and stability under intended service conditions.Floor Protectors: Durable, non-marking polypropylene or equivalent buffers shall be fitted to all floor-contact points to prevent scratching and damage to the flooring.Workmanship and Finish: All components shall be free from sharp edges, burrs, cracks, defective welds and visible surface defects. The completed chair shall be stable, rigid, corrosion-resistant and suitable for continuous use in hospital and public waiting areas.Approval and Testing: The supplier shall submit dimensional drawings, material specifications and finish details for approval. The assembled chair shall meet the applicable requirements for structural stability, strength and durability.Gross Weight : 30 Kg approx. |
| 24 | Cafeteria Chair1. SEAT/BACK (CHAIR): The Seat and back are made up of injection moulded high impact strength polypropylene, Polymer compound with indoor grade UV resistance. SEAT SIZE : 52.5cm. (W) x 53.2cm.(D)BACK SIZE : 51.6cm.(W) x40.5 cm.(H)2. S.S UNDERSTRUCTURE OPTION FOR CAFÉ CHAIR : The tubular welded frame is made from Dia 2.22 + 0.03 cm x 0.12+0.0128 cm and 3.5 + 0.03 cm X 1.5 +0.03 cm x 0.12 + 0.0128 cm stainless steel 304 grade tube. The tubes are buff polished to give shiny finish.3. SHOE: The shoes are made of high impact strength polypropylene polymer compound with indoor grade UV resistance and pressed fitted with tubular frame. There shall be Polypropylene buffers fitted for making the floor scratch resistant.Material and Color approval shall be taken prior to production.Overall Dimensions of ChairSeat Height - 45.0 cm.Height - 84.5cm.Width & Depth of Chair as measured from base, width 62.3cm, Depth 55.8 cm.Approved Make: Godrej/ Geeken/ Featherlite/ Herman Miller/ Steelcase |
| 25 | Seminar Chair with Arm and without DeskletDimension: 600mm to 700mm (W) x 900mm (H)x 600mm to 700mm(D), Seat Height: 450mm. Back: 450mm Width x 450mm HeightSeat Size: 470mm Width x 500mm DepthErgonomic fixed seminar chair with cushioned seat upholstered in high-quality, durable fabric/leatherette and breathable mesh backrest. Seat shall be provided with high-resilience (HR) polyurethane foam of minimum density 45 ± 2 kg/m³ and hardness 16 ± 2 kgf at 25% compression, tested in accordance with IS 7888 with nylon base. The back shall consist of an injection-moulded glass-filled nylon frame upholstered with micro-mesh fabric made of high-tenacity yarn. The chair shall be fitted with a heavy-duty four-star pedestal made of reinforced glass-filled nylon or die-cast aluminium alloy, with four twin-wheel castors suitable for the intended flooring. The chair shall have a minimum user-weight capacity of 120 kg and comply with applicable office-chair strength, stability and durability standards.Approved Make: Godrej/ Geeken/ Featherlite/ Herman Miller/ Steelcase |
| 26 | Office ChairDimension: 760mm (W)x 1280mm (H)x 760mm (D), Seat Height: 450mmErgonomic revolving chair with cushioned seat upholstered in high-quality, durable fabric/leatherette and breathable mesh backrest. Seat shall be provided with high-resilience (HR) polyurethane foam of minimum density 45 ± 2 kg/m³ and hardness 16 ± 2 kgf at 25% compression, tested in accordance with IS 7888 with nylon base. The back shall consist of an injection-moulded glass-filled nylon frame upholstered with micro-mesh fabric made of high-tenacity yarn. The chair shall have adjustable lumbar support, height-adjustable armrests, pneumatic seat-height adjustment, synchro-tilt mechanism with tilt-tension adjustment and multiple locking positions with anti-shock feature. The chair shall be fitted with a heavy-duty five-star pedestal made of reinforced glass-filled nylon or die-cast aluminium alloy, with five twin-wheel castors suitable for the intended flooring. The chair shall have a minimum user-weight capacity of 120 kg and comply with applicable office-chair strength, stability and durability standards.Approved Make: Godrej/ Geeken/ Featherlite/ Herman Miller/ Steelcase |
| 27 | Cabinet Drawer ( 4 Drawer Cabinet)Dimensions: 1350 mm (H) × 450 mm (W) × 600 mm (D).Material: All components shall be made of CRCA steel with rigid knock-down construction. Sheet Thickness: All 0.7 mm thickness sheet. Locking System: Centralised locking with shooting bolts and Lever lock.Drawer Handle: Full-length recessed metal handle for easy operation.Label Holder: Snap-on plastic label holder on each drawer front.Drawer Slides: Precision ball-bearing slides with a maximum drawer load capacity of 40 kg and durability of 75,000 cycles under the specified test conditions.Safety: Anti-tipping mechanism to prevent opening of multiple drawers simultaneously and anti-rebound mechanism.Rigidity: Triangular steel plates shall be riveted at the bottom corners.Finish: Epoxy powder coating. |
| 28 | Centre Table (600mm x450mm x380mm)Overall Dimensions (W × D × H): 600 × 450 × 380 mm.Table Top: 18mm thick BWP plywood (IS 303 BWP Grade 15 Yrs Warranty) with hot pressed 1mm decorative laminate on top and 0.7mm white laminate underneath. Both laminates shall be factory pressed and bonded, and conform to IS 2046.PVC Edge Banding: Matching 2 mm thick PVC edge banding on exposed tabletop edges with hot pasted Edge Banding Machine. Corners radiused, no visible glue line.Leg: Sturdy, stable support structure made of seasoned hardwood or teakwood 60mm x 60mm with side frame of 70 mm X 25 mm. Polypropylene buffers fitted at bottom under each leg for making the floor scratch resistant. All exposed wood surface of the table will be PU polish. Surface Quality: Smooth, scratch-resistant, moisture-resistant and easy-to-clean finish, with no sharp edges or visible manufacturing defects.Workmanship: The table shall be rigid, level, stable and free from wobbling, delamination and loose joints.Plywood : ARCHIDPLY/ CENTURY PLY/GREEN Ply. Laminates: Archidlam/ Century / Greenlam/ MerinoApproval: Physical samples of plywood, laminate, color and finished wood to be approved before production. |
| 29 | Rectangular Office Table Overall Dimensions (W × D × H): 1500 × 750 × 750 mm.Overall Dimensions (W × D × H): 1500 × 750 × 750 mm.Table Top: 38mm thick table top with18mm thick BWP plywood (IS 303 BWP Grade,15 Yrs Warranty). Modesty panel on the back side with size of 1500 mm x 600 mm with 18mm thick BWP Plywood. Desk grommet on top. The table should be adequately reinforced from the underside using suitable structural members to avoid sagging. Sides: Sturdy, stable support structure made of 18mm thick BWP Plywood. Polypropylene buffers fitted at bottom under each leg for making the floor scratch resistant. The fitting will be KD fittings format like Minifix and barrelnut. Drawer for storage with telescopic channel on one side only. Telescopic Channel & Handles: Rust Free. Full extension, Ball-bearing Heavy Duty telescopic drawer channel, 450 mm nominal length, zinc-plated/powder-coated, minimum load rating 35 kg, fabricated from cold-rolled steel with a minimum sheet thickness of 1.2 mm, 50,000 open/close cycles per manufacturer’s test report. Chromium plated durable handles, size and sample approval from Employer. Laminates: Hot pressed 1mm decorative laminate on top and outer surfaces and 0.7mm white laminate on other surfaces. Both laminates shall be factory pressed and bonded, and conform to IS 2046. PVC Edge Banding: Matching 2 mm thick PVC edge banding on exposed tabletop edges and all other surface of plywood shall have 0.8mm PVC edge banding. Edge banding with hot pasted Edge Banding Machine. Corners radiused, no visible glue line.Surface Quality: Smooth, scratch-resistant, moisture-resistant and easy-to-clean finish, with no sharp edges or visible manufacturing defects.Workmanship: The table shall be rigid, level, stable and free from wobbling, delamination and loose joints.Plywood: ARCHIDPLY/ CENTURY PLY/GREEN Ply. Laminates: Archidlam/ Century / Greenlam/ MerinoHardware: Hettich/ Yale / Doorset/ Hafele/ ebco. Approval: Physical samples of plywood, laminate, color and finished wood to be approved before production. |
| 30 | Side TableOverall Dimensions (W × D × H): 1000 × 600 × 750 mm.Table Top: 38mm thick table top with18mm thick BWP plywood (IS 303 BWP Grade,15 Yrs Warranty). Modesty panel on the back side with size of 1000 mm x 600 mm with 18mm thick BWP Plywood. Desk grommet on top. The table should be adequately reinforced from the underside using suitable structural members to avoid sagging. Sides: Sturdy, stable support structure made of 18mm thick BWP Plywood. Polypropylene buffers fitted at bottom under each leg for making the floor scratch resistant. The fitting will be KD fittings format like Minifix and barrelnut. 1 No. Drawer for storage with telescopic channel.Telescopic Channel & Handles: Rust Free. Full extension, Ball-bearing Heavy Duty telescopic drawer channel, 450 mm nominal length, zinc-plated/powder-coated, minimum load rating 35 kg, fabricated from cold-rolled steel with a minimum sheet thickness of 1.2 mm, 50,000 open/close cycles per manufacturer’s test report. Chromium plated durable handles, size and sample approval from Employer. Laminates: Hot pressed 1mm decorative laminate on top and outer surfaces and 0.7mm white laminate on other surfaces. Both laminates shall be factory pressed and bonded, and conform to IS 2046. PVC Edge Banding: Matching 2 mm thick PVC edge banding on exposed tabletop edges and all other surface of plywood shall have 0.8mm PVC edge banding. Edge banding with hot pasted Edge Banding Machine. Corners radiused, no visible glue line.Surface Quality: Smooth, scratch-resistant, moisture-resistant and easy-to-clean finish, with no sharp edges or visible manufacturing defects.Workmanship: The table shall be rigid, level, stable and free from wobbling, delamination and loose joints.Plywood: ARCHIDPLY/ CENTURY PLY/GREEN Ply. Laminates: Archidlam/ Century / Greenlam/ MerinoHardware: Hettich/ Yale / Doorset/ Hafele/ ebco. Approval: Physical samples of plywood, laminate, color and finishing to be approved before production. |
| 31 | Locker (375 mm (W) × 470 mm (D) × 1950 mm (H) each stack)Steel Locker with LocksOverall Dimensions: 375 mm (W) × 470 mm (D) × 1950 mm (H) each stack including levelers, as per approved manufacturer drawings. 2 Door. Combined Stack shall be considered as a unit.Construction: Aesthetically appealing, completely knock-down modular construction. Screw-type adjustable levelers with a nominal height of 50 mm and an adjustment range of 15 mm, as per manufacturer's design.Material and Body: Fabricated from cold-rolled close-annealed (CRCA) steel sheet of minimum 0.5 mm nominal thickness, with suitable formed edges and stiffeners. Top and bottom stiffeners shall be fabricated from 1.2 mm nominal-thickness CRCA steel sheet. The manufacturer shall ensure adequate rigidity and stability of the assembled locker under normal intended use.Doors: Fabricated from 0.6 mm nominal-thickness CRCA steel sheet, suitably formed and stiffened to prevent undue bending during normal operation. Soft-closing hinges shall be provided. Door dimensions and formed depth shall conform to the approved manufacturer's drawing.Shelves: Fabricated from 0.5 mm nominal-thickness CRCA steel sheet, with suitably formed bends for rigidity. Load capacity of 20 kg. Locking System: Conventional lock and key arrangements. 2 No. Keys.Surface Finish: All steel components shall undergo suitable surface preparation and pretreatment before application of epoxy-polyester powder coating. The coating shall have a minimum dry-film thickness of 50 microns, with uniform coverage and no visible defects.Workmanship: All edges shall be properly deburred and finished. The locker shall be free from sharp edges, defective welds, loose joints, coating defects and misaligned doors. Doors shall open and close smoothly, and the assembled unit shall be stable and level. |
| 32 | Recliner ChairOverall Dimensions: 900 mm (W) × 900 mm (D) × 1050 mm (H)Seat Height: 450 mm – 480 mm, Seat Depth: 520 mm – 550 mmFrame Construction: Kiln-dried solid hardwood combined with BWP plywood. Reinforced corner blocks for enhanced structural integrity.Reclining Mechanism: Heavy-gauge alloy steel chassis with rust-resistant powder coating. Manual (latch/pull-tab) button configurations. The foot resting flap shall come out from below to expand the body to give comfort. Cushioning & Comfort: Seat: High-resilience (HR) polyurethane foam (density: 40 kg/m³) wrapped in polyester fiber batting. Crafted with premium nappe air leather.Suspension: Pocket spring coils combined with high-tensile sinuous S-springs to prevent sagging.Backrest & Armrests: High-density blown virgin microfiber for a plush, body-contouring feel. |
| 33 | Duty Room BedsOverall Dimension - 2050mm L x 955mm D x 600 HMaterial:Headboard panels are made of 18 mm thick BWP Plywood.All the exposed edges are edge banded with 2 mm thick PVC edge banding. Bed leg frame structure consist of metal frames made of M.S. 50 x 25 mm box section in 1.2 thickness Internal Pipes made of 19 x 19 mm box section in 0.9 mm thickness. Headboard pipes are made of 25 x 25 mm box section in 0.9 mm thickness. Mattress part shall have made with 18 mm thick BWP Plywood in two parts supported by structural section. All metal parts shall be powder coated Matte White Finish. Mosquito Stand: Structure consist of metal frame made of M.S. 19 mm Square Pipe in 0.9 mm Thickness. |
| 34 | Mattress(The dimension of Mattress should be in line with the bed size as mentioned above)Number of Layers-Two Layers, Thickness of Core Layer} - 50mm, Thickness of Core Layer2 - 50mm, Material of Core Layer: PU Foam, Material of Core Layer2: PU Foam, Quilting : Both side Quilting (Double Sided), Thickness of Quilting:8mm, Fabric Composition:Polyester, Construction: Woven, Fabric Mass :80g/m2, Core Layer I Density : 32 kg/m3, Core Layer 2 Density :32Kg/m3 .Compression Set for PU Foam : 10%,Durability test for Complete mattress: Loss of height not more than 13mm.Resistance to Ageing for PU Foam as per IS 7888 latest: Shall meet the requirement of IS 7933 Latest. Durability Test for PU Foam as per IS 7888 latest: Shall meet the requirement of IS 7933 Latest. Durability Test for Complete Mattress: Loss of height not more than 13mm as per ASTM 1566. Test report to be furnished. Approved Makes: Sleepwell/ Duro flex/Kurl-On/ Godrej/ Flo Mattress |
| 35 | PillowConforming to Standards: DGQA Prov Specn No. S/1706/Synthetic Pillow/ TC-6Length: 700mm, Width: 400mm, Height of Pillow At Centre 170mmBody Fabric: Cloth plain weave Polyester cotton (67:33) whiteEnds per cm: 40, Picks per cm: 30Body fabric mass (g/sqm): 110Filling Material: Hollow siliconized polyester fibre of 7 DenierMass of filling material (g): 625Total mass of synthetic pillow (g): 715Reinforcing/ Piping: Shroud laid cotton line of 2 mm diaAvailability of Test Report from designated AHSP,NABL/ ILAC accredited or Central Government Lab to prove conformity of products to the specification |
| 36 | Work Table with drawerOverall Dimensions (W × D × H): 1200 × 750 × 750 mm.Table Top: 38mm thick table top with18mm thick BWP plywood (IS 303 BWP Grade,15 Yrs Warranty). Modesty panel on the back side with size of 1200 mm x 600 mm with 18mm thick BWP Plywood. Desk grommet on top. The table should be adequately reinforced from the underside using suitable structural members to avoid sagging. Sides: Sturdy, stable support structure made of 18mm thick BWP Plywood. Polypropylene buffers fitted at bottom under each leg for making the floor scratch resistant. The fitting will be KD fittings format like Minifix and barrelnut. Drawer for storage with telescopic channel. Telescopic Channel & Handles: Rust Free. Full extension, Ball-bearing Heavy Duty telescopic drawer channel, 450 mm nominal length, zinc-plated/powder-coated, minimum load rating 35 kg, fabricated from cold-rolled steel with a minimum sheet thickness of 1.2 mm, 50,000 open/close cycles per manufacturer’s test report. Chromium plated durable handles, size and sample approval from Employer. Laminates: Hot pressed 1mm decorative laminate on top and outer surfaces and 0.7mm white laminate on other surfaces. Both laminates shall be factory pressed and bonded, and conform to IS 2046. PVC Edge Banding: Matching 2 mm thick PVC edge banding on exposed tabletop edges and all other surface of plywood shall have 0.8mm PVC edge banding. Edge banding with hot pasted Edge Banding Machine. Corners radiused, no visible glue line.Surface Quality: Smooth, scratch-resistant, moisture-resistant and easy-to-clean finish, with no sharp edges or visible manufacturing defects.Workmanship: The table shall be rigid, level, stable and free from wobbling, delamination and loose joints.Plywood: ARCHIDPLY/ CENTURY PLY/GREEN Ply. Laminates: Archidlam/ Century / Greenlam/ MerinoHardware: Hettich/ Yale / Doorset/ Hafele/ ebco. Approval: Physical samples of plywood, laminate, color and finished wood to be approved before production. |
| 37 | Large Tables (Conference) 1100 (L) x2200 (W) x750 (H) mmTable Top: The core shall be of minimum thickness 38 mm (finished thickness not less than 38 mm, including surface laminate). The core shall be of E1 formaldehyde class, free from voids, delamination and moisture damage. The top shall be finished with [high-pressure laminate (HPL), minimum 1.0 mm / melamine-faced board / natural veneer with PU lacquer] on the upper surface, and a balancing laminate 0.7mm on the underside. The surface shall be scratch, abrasion and heat resistant, non-reflective, matt or low gloss. Minimum 2 desk grommets with covers shall be provided on the tabletop for cable routing. Minimum 3 electrical power sockets with switches shall be provided, suitably integrated into the desk. Provision shall be made for voice/telephone and data connectivity points, as required. All fittings shall be neatly installed, safe and suitable for office use.Structure: Use stiffening rails, torsion box or an under-frame, to control top deflection. The under-frame and legs shall be of mild steel tubes, Steel tube legs and rails- 1.6mm wall thickness, Sheet-steel panel legs 1.2mm wall thickness, Top mounting plates and brackets 2mm wall thickness. All metal parts shall be painted with epoxy-polyester powder coating, oven-cured.Clearance: Minimum knee clearance of 620 mm.Polypropylene buffers fitted at bottom under each leg for making the floor scratch resistant. The fitting will be KD fittings format like Minifix and barrelnut.PVC Edge Banding: Matching 2 mm thick PVC edge banding on exposed tabletop edges and all other surface of plywood shall have 0.8mm PVC edge banding. Edge banding with hot pasted Edge Banding Machine. Corners radiused, no visible glue line.Workmanship: The table shall be rigid, level, stable and free from wobbling, delamination and loose joints.Plywood: ARCHIDPLY/ CENTURY PLY/GREEN Ply. Laminates: Archidlam/ Century / Greenlam/ MerinoHardware: Hettich/ Yale / Doorset/ Hafele/ ebco. Approval: Physical samples of plywood, Design, laminate, color and finished wood to be approved before production. |
| 38 | Large Tables -1500 (L) x2100 (W) x750 (H) mmTable Top: The core shall be of minimum thickness 38 mm (finished thickness not less than 38 mm, including surface laminate). The core shall be of E1 formaldehyde class, free from voids, delamination and moisture damage. The top shall be finished with [high-pressure laminate (HPL), minimum 1.0 mm / melamine-faced board / natural veneer with PU lacquer] on the upper surface, and a balancing laminate 0.7mm on the underside. The surface shall be scratch, abrasion and heat resistant, non-reflective, matt or low gloss. Minimum 2 desk grommets with covers shall be provided on the tabletop for cable routing. Minimum 3 electrical power sockets with switches shall be provided, suitably integrated into the desk. Provision shall be made for voice/telephone and data connectivity points, as required. All fittings shall be neatly installed, safe and suitable for office use.Structure: Use stiffening rails, torsion box or an under-frame, to control top deflection. The under-frame and legs shall be of mild steel tubes, Steel tube legs and rails- 1.6mm wall thickness, Sheet-steel panel legs 1.2mm wall thickness, Top mounting plates and brackets 2mm wall thickness. All metal parts shall be painted with epoxy-polyester powder coating, oven-cured.Clearance: Minimum knee clearance of 620 mm.Polypropylene buffers fitted at bottom under each leg for making the floor scratch resistant. The fitting will be KD fittings format like Minifix and barrelnut.PVC Edge Banding: Matching 2 mm thick PVC edge banding on exposed tabletop edges and all other surface of plywood shall have 0.8mm PVC edge banding. Edge banding with hot pasted Edge Banding Machine. Corners radiused, no visible glue line.Workmanship: The table shall be rigid, level, stable and free from wobbling, delamination and loose joints.Plywood: ARCHIDPLY/ CENTURY PLY/GREEN Ply. Laminates: Archidlam/ Century / Greenlam/ MerinoHardware: Hettich/ Yale / Doorset/ Hafele/ ebco. Approval: Physical samples of plywood, Design, laminate, color and finished wood to be approved before production. |
| 39 | Large Tables (Conference) 3300 (L) x1100 (W) x750 (H) mmTable Top: The core shall be of minimum thickness 38 mm (finished thickness not less than 38 mm, including surface laminate). The core shall be of E1 formaldehyde class, free from voids, delamination and moisture damage. The top shall be finished with [high-pressure laminate (HPL), minimum 1.0 mm / melamine-faced board / natural veneer with PU lacquer] on the upper surface, and a balancing laminate 0.7mm on the underside. The surface shall be scratch, abrasion and heat resistant, non-reflective, matt or low gloss. Minimum 2 desk grommets with covers shall be provided on the tabletop for cable routing. Minimum 3 electrical power sockets with switches shall be provided, suitably integrated into the desk. Provision shall be made for voice/telephone and data connectivity points, as required. All fittings shall be neatly installed, safe and suitable for office use.Structure: Use stiffening rails, torsion box or an under-frame, to control top deflection. The under-frame and legs shall be of mild steel tubes, Steel tube legs and rails- 1.6mm wall thickness, Sheet-steel panel legs 1.2mm wall thickness, Top mounting plates and brackets 2mm wall thickness. All metal parts shall be painted with epoxy-polyester powder coating, oven-cured.Clearance: Minimum knee clearance of 620 mm.Polypropylene buffers fitted at bottom under each leg for making the floor scratch resistant. The fitting will be KD fittings format like Minifix and barrelnut.PVC Edge Banding: Matching 2 mm thick PVC edge banding on exposed tabletop edges and all other surface of plywood shall have 0.8mm PVC edge banding. Edge banding with hot pasted Edge Banding Machine. Corners radiused, no visible glue line.Workmanship: The table shall be rigid, level, stable and free from wobbling, delamination and loose joints.Plywood: ARCHIDPLY/ CENTURY PLY/GREEN Ply. Laminates: Archidlam/ Century / Greenlam/ MerinoHardware: Hettich/ Yale / Doorset/ Hafele/ ebco. Approval: Physical samples of plywood, Design, laminate, color and finished wood to be approved before production. |
| 40 | Bulk storage Overall Dimensions 900mm(W)x450mm(D)x1800 mm(H) .Cabinet:Freestanding sheet-steel storage cabinets with lockable doors (shutters) and adjustable shelves.Material: High Yield Strength Cold-Rolled Low-Carbon Steel with All sheet components shall be cold-rolled close-annealed (CRCA) steel. Sheet Thickness: Major panels: 0.7 mm, False side panel: 0.9 mm., Bottom shelf: 0.8 mm, Door (shutter) panels 0.8mm, Vertical shutter handle sections: 1.2 mm.Door: The cabinet shall have two hinged doors. Doors shall close flush, with an even gap not exceeding 3 mm along all edges. Minimum 4 No. hinges per Door, Concealed or heavy-duty pin-type steel hinges. Additional one door shall be provided in case the width is more than 1m.Internal Configuration: Adjustable shelves in addition to the fixed bottom shelf, subject to confirmation of the approved product configuration. Shelf positions shall be adjustable on a vertical pitch of 25 mm, with positive-locking shelf supports that cannot be dislodged by normal use or accidental upward movement.Shelf Load Capacity: Maximum uniformly distributed load of 80 kg per shelf, subject to manufacturer's test certification.Locking: 10-lever cam lock with lock-lever mechanism for secure locking of the shutters.Key Operated. 2 No. Keys set.Levelers: Screw-type levelers with hexagonal plastic bases, providing a minimum additional unit height of 8 mm and up to 5 mm further height adjustment.Finish: Epoxy-polyester powder coating with a dry-film thickness of 50 ± 10 microns.Colour: to be approved by Employer.Approved Make: Godrej/ Geeken/ Featherlite/ Herman Miller/ Steelcase |
| 41 | Cabinet Overall Dimensions 900mm(W)x 450mm(D) x 1800 mm(H)Cabinet:Freestanding sheet-steel storage cabinets with lockable doors (shutters) and adjustable shelves.Material: High Yield Strength Cold-Rolled Low-Carbon Steel with All sheet components shall be cold-rolled close-annealed (CRCA) steel. Sheet Thickness: Major panels: 0.7 mm, False side panel: 0.9 mm., Bottom shelf: 0.8 mm, Door (shutter) panels 0.8mm, Vertical shutter handle sections: 1.2 mm.Door: The cabinet shall have two hinged doors. Doors shall close flush, with an even gap not exceeding 3 mm along all edges. Minimum 4 No. hinges per Door, Concealed or heavy-duty pin-type steel hinges. Additional one door shall be provided in case the width is more than 1m. Internal Configuration: Adjustable shelves in addition to the fixed bottom shelf, subject to confirmation of the approved product configuration. Shelf positions shall be adjustable on a vertical pitch of 25 mm, with positive-locking shelf supports that cannot be dislodged by normal use or accidental upward movement.Shelf Load Capacity: Maximum uniformly distributed load of 80 kg per shelf, subject to manufacturer's test certification.Locking: 10-lever cam lock with lock-lever mechanism for secure locking of the shutters.Key Operated. 2 No. Keys set.Levelers: Screw-type levelers with hexagonal plastic bases, providing a minimum additional unit height of 8 mm and up to 5 mm further height adjustment.Finish: Epoxy-polyester powder coating with a dry-film thickness of 50 ± 10 microns.Colour: to be approved by Employer.Approved Make: Godrej/ Geeken/ Featherlite/ Herman Miller/ Steelcase |
| 42 | CabinetOverall Dimensions 800mm(W)x 600mm(D) x 750 mm(H)Cabinet:Freestanding sheet-steel storage cabinets with lockable doors (shutters) and adjustable shelves.Material: High Yield Strength Cold-Rolled Low-Carbon Steel with All sheet components shall be cold-rolled close-annealed (CRCA) steel. Sheet Thickness: Major panels: 0.7 mm, False side panel: 0.9 mm., Bottom shelf: 0.8 mm, Door (shutter) panels 0.8mm, Vertical shutter handle sections: 1.2 mm.Door: The cabinet shall have two hinged doors. Doors shall close flush, with an even gap not exceeding 3 mm along all edges. Minimum 4 No. hinges per Door, Concealed or heavy-duty pin-type steel hinges. Additional one door shall be provided in case the width is more than 1m. Internal Configuration: Adjustable shelves in addition to the fixed bottom shelf, subject to confirmation of the approved product configuration. Shelf positions shall be adjustable on a vertical pitch of 25 mm, with positive-locking shelf supports that cannot be dislodged by normal use or accidental upward movement.Shelf Load Capacity: Maximum uniformly distributed load of 80 kg per shelf, subject to manufacturer's test certification.Locking: 10-lever cam lock with lock-lever mechanism for secure locking of the shutters.Key Operated. 2 No. Keys set.Levelers: Screw-type levelers with hexagonal plastic bases, providing a minimum additional unit height of 8 mm and up to 5 mm further height adjustment.Finish: Epoxy-polyester powder coating with a dry-film thickness of 50 ± 10 microns.Colour: to be approved by Employer.Approved Make: Godrej/ Geeken/ Featherlite/ Herman Miller/ Steelcase |
| 43 | CabinetOverall Dimensions 1200mm(W)x 600mm(D) x 1800 mm(H)Cabinet:Freestanding sheet-steel storage cabinets with lockable doors (shutters) and adjustable shelves.Material: High Yield Strength Cold-Rolled Low-Carbon Steel with All sheet components shall be cold-rolled close-annealed (CRCA) steel. Sheet Thickness: Major panels: 0.7 mm, False side panel: 0.9 mm., Bottom shelf: 0.8 mm, Door (shutter) panels 0.8mm, Vertical shutter handle sections: 1.2 mm.Door: The cabinet shall have two hinged doors. Doors shall close flush, with an even gap not exceeding 3 mm along all edges. Minimum 4 No. hinges per Door, Concealed or heavy-duty pin-type steel hinges. Additional one door shall be provided in case the width is more than 1m. Internal Configuration: Adjustable shelves in addition to the fixed bottom shelf, subject to confirmation of the approved product configuration. Shelf positions shall be adjustable on a vertical pitch of 25 mm, with positive-locking shelf supports that cannot be dislodged by normal use or accidental upward movement.Shelf Load Capacity: Maximum uniformly distributed load of 80 kg per shelf, subject to manufacturer's test certification.Locking: 10-lever cam lock with lock-lever mechanism for secure locking of the shutters.Key Operated. 2 No. Keys set.Levelers: Screw-type levelers with hexagonal plastic bases, providing a minimum additional unit height of 8 mm and up to 5 mm further height adjustment.Finish: Epoxy-polyester powder coating with a dry-film thickness of 50 ± 10 microns.Colour: to be approved by Employer.Approved Make: Godrej/ Geeken/ Featherlite/ Herman Miller/ Steelcase |
| 44 | CabinetOverall Dimensions 900mm(W)x 600mm(D) x 1800 mm(H)Cabinet:Freestanding sheet-steel storage cabinets with lockable doors (shutters) and adjustable shelves.Material: High Yield Strength Cold-Rolled Low-Carbon Steel with All sheet components shall be cold-rolled close-annealed (CRCA) steel. Sheet Thickness: Major panels: 0.7 mm, False side panel: 0.9 mm., Bottom shelf: 0.8 mm, Door (shutter) panels 0.8mm, Vertical shutter handle sections: 1.2 mm.Door: The cabinet shall have two hinged doors. Doors shall close flush, with an even gap not exceeding 3 mm along all edges. Minimum 4 No. hinges per Door, Concealed or heavy-duty pin-type steel hinges. Additional one door shall be provided in case the width is more than 1m. Internal Configuration: Adjustable shelves in addition to the fixed bottom shelf, subject to confirmation of the approved product configuration. Shelf positions shall be adjustable on a vertical pitch of 25 mm, with positive-locking shelf supports that cannot be dislodged by normal use or accidental upward movement.Shelf Load Capacity: Maximum uniformly distributed load of 80 kg per shelf, subject to manufacturer's test certification.Locking: 10-lever cam lock with lock-lever mechanism for secure locking of the shutters.Key Operated. 2 No. Keys set.Levelers: Screw-type levelers with hexagonal plastic bases, providing a minimum additional unit height of 8 mm and up to 5 mm further height adjustment.Finish: Epoxy-polyester powder coating with a dry-film thickness of 50 ± 10 microns.Colour: to be approved by Employer.Approved Make: Godrej/ Geeken/ Featherlite/ Herman Miller/ Steelcase |
| 45 | CabinetOverall Dimensions 600mm(W)x 600mm(D) x 1800 mm(H)Cabinet:Freestanding sheet-steel storage cabinets with lockable doors (shutters) and adjustable shelves.Material: High Yield Strength Cold-Rolled Low-Carbon Steel with All sheet components shall be cold-rolled close-annealed (CRCA) steel. Sheet Thickness: Major panels: 0.7 mm, False side panel: 0.9 mm., Bottom shelf: 0.8 mm, Door (shutter) panels 0.8mm, Vertical shutter handle sections: 1.2 mm.Door: The cabinet shall have two hinged doors. Doors shall close flush, with an even gap not exceeding 3 mm along all edges. Minimum 4 No. hinges per Door, Concealed or heavy-duty pin-type steel hinges. Additional one door shall be provided in case the width is more than 1m. Internal Configuration: Adjustable shelves in addition to the fixed bottom shelf, subject to confirmation of the approved product configuration. Shelf positions shall be adjustable on a vertical pitch of 25 mm, with positive-locking shelf supports that cannot be dislodged by normal use or accidental upward movement.Shelf Load Capacity: Maximum uniformly distributed load of 80 kg per shelf, subject to manufacturer's test certification.Locking: 10-lever cam lock with lock-lever mechanism for secure locking of the shutters.Key Operated. 2 No. Keys set.Levelers: Screw-type levelers with hexagonal plastic bases, providing a minimum additional unit height of 8 mm and up to 5 mm further height adjustment.Finish: Epoxy-polyester powder coating with a dry-film thickness of 50 ± 10 microns.Colour: to be approved by Employer.Approved Make: Godrej/ Geeken/ Featherlite/ Herman Miller/ Steelcase |
| 46 | Locker Room Bench 2100x450x560Locker Room Bench with Wooden Slatted TopType: Heavy-duty locker room bench with a slatted wooden seat and rigid metal frame. Overall Dimensions: Approximately 2100 mm (L) × 560 mm (W) × 450 mm (H). Seat Top: Made of seasoned, kiln-dried hardwood timber slats, securely fixed to the supporting frame. Slats shall have smooth, rounded edges, a uniform finish and adequate spacing for ventilation and drainage. Timber shall be free from cracks, warping, decay and defects. Wooden slats: Sanded smooth and finished with clear protective wood coating or suitable water-resistant varnish.Frame: Heavy-duty MS square hollow-section steel frame, fabricated with welded joints and adequate cross-bracing to ensure rigidity, stability and resistance to wobbling under normal use.Steel Sections: Minimum 40 × 40 × 2.0 mm MS square hollow sections for legs and main structural members, with suitable intermediate supports.Metal frame: Pretreated for corrosion resistance and finished with epoxy-polyester powder coating, minimum 50 microns dry-film thickness.Assembly and Fixing: Timber slats shall be securely fastened to the metal frame using corrosion-resistant screws or bolts. All exposed fasteners shall be properly finished, with no sharp edges or projections.Stability and Safety: The bench shall have a stable, non-rocking structure, suitable cross-members and protective floor-contact caps. All corners and edges shall be smooth and safe for users.Load Capacity: Minimum uniformly distributed load capacity of 250 kg.Workmanship: The bench shall be free from burrs, sharp edges, welding defects, loose joints and uneven finishing. |
| 47 | Large Tables (conference) 4000 (L) x1100 (W) x750 (H) mmTable Top: The core shall be of minimum thickness 38 mm (finished thickness not less than 38 mm, including surface laminate). The core shall be of E1 formaldehyde class, free from voids, delamination and moisture damage. The top shall be finished with [high-pressure laminate (HPL), minimum 1.0 mm / melamine-faced board / natural veneer with PU lacquer] on the upper surface, and a balancing laminate 0.7mm on the underside. The surface shall be scratch, abrasion and heat resistant, non-reflective, matt or low gloss. Minimum 2 desk grommets with covers shall be provided on the tabletop for cable routing. Minimum 3 electrical power sockets with switches shall be provided, suitably integrated into the desk. Provision shall be made for voice/telephone and data connectivity points, as required. All fittings shall be neatly installed, safe and suitable for office use.Structure: Use stiffening rails, torsion box or an under-frame, to control top deflection. The under-frame and legs shall be of mild steel tubes, Steel tube legs and rails- 1.6mm wall thickness, Sheet-steel panel legs 1.2mm wall thickness, Top mounting plates and brackets 2mm wall thickness. All metal parts shall be painted with epoxy-polyester powder coating, oven-cured.Clearance: Minimum knee clearance of 620 mm.Polypropylene buffers fitted at bottom under each leg for making the floor scratch resistant. The fitting will be KD fittings format like Minifix and barrelnut.PVC Edge Banding: Matching 2 mm thick PVC edge banding on exposed tabletop edges and all other surface of plywood shall have 0.8mm PVC edge banding. Edge banding with hot pasted Edge Banding Machine. Corners radiused, no visible glue line.Workmanship: The table shall be rigid, level, stable and free from wobbling, delamination and loose joints.Plywood: ARCHIDPLY/ CENTURY PLY/GREEN Ply. Laminates: Archidlam/ Century / Greenlam/ MerinoHardware: Hettich/ Yale / Doorset/ Hafele/ ebco. Approval: Physical samples of plywood, Design, laminate, color and finished wood to be approved before production. |
| 48 | Large Tables -1500 (L) x750 (W)x750 (H)Table Top: The core shall be of minimum thickness 38 mm (finished thickness not less than 38 mm, including surface laminate). The core shall be of E1 formaldehyde class, free from voids, delamination and moisture damage. The top shall be finished with [high-pressure laminate (HPL), minimum 1.0 mm / melamine-faced board / natural veneer with PU lacquer] on the upper surface, and a balancing laminate 0.7mm on the underside. The surface shall be scratch, abrasion and heat resistant, non-reflective, matt or low gloss. Minimum 2 desk grommets with covers shall be provided on the tabletop for cable routing. Minimum 3 electrical power sockets with switches shall be provided, suitably integrated into the desk. Provision shall be made for voice/telephone and data connectivity points, as required. All fittings shall be neatly installed, safe and suitable for office use.Structure: Use stiffening rails, torsion box or an under-frame, to control top deflection. The under-frame and legs shall be of mild steel tubes, Steel tube legs and rails- 1.6mm wall thickness, Sheet-steel panel legs 1.2mm wall thickness, Top mounting plates and brackets 2mm wall thickness. All metal parts shall be painted with epoxy-polyester powder coating, oven-cured.Clearance: Minimum knee clearance of 620 mm.Polypropylene buffers fitted at bottom under each leg for making the floor scratch resistant. The fitting will be KD fittings format like Minifix and barrelnut.PVC Edge Banding: Matching 2 mm thick PVC edge banding on exposed tabletop edges and all other surface of plywood shall have 0.8mm PVC edge banding. Edge banding with hot pasted Edge Banding Machine. Corners radiused, no visible glue line.Workmanship: The table shall be rigid, level, stable and free from wobbling, delamination and loose joints.Plywood: ARCHIDPLY/ CENTURY PLY/GREEN Ply. Laminates: Archidlam/ Century / Greenlam/ MerinoHardware: Hettich/ Yale / Doorset/ Hafele/ ebco. Approval: Physical samples of plywood, Design, laminate, color and finished wood to be approved before production. |
| 49 | Large Tables (conference)-1200 (L) x1200 (W) x750 (H)Table Top: The core shall be of minimum thickness 38 mm (finished thickness not less than 38 mm, including surface laminate). The core shall be of E1 formaldehyde class, free from voids, delamination and moisture damage. The top shall be finished with [high-pressure laminate (HPL), minimum 1.0 mm / melamine-faced board / natural veneer with PU lacquer] on the upper surface, and a balancing laminate 0.7mm on the underside. The surface shall be scratch, abrasion and heat resistant, non-reflective, matt or low gloss. Minimum 2 desk grommets with covers shall be provided on the tabletop for cable routing. Minimum 3 electrical power sockets with switches shall be provided, suitably integrated into the desk. Provision shall be made for voice/telephone and data connectivity points, as required. All fittings shall be neatly installed, safe and suitable for office use.Structure: Use stiffening rails, torsion box or an under-frame, to control top deflection. The under-frame and legs shall be of mild steel tubes, Steel tube legs and rails- 1.6mm wall thickness, Sheet-steel panel legs 1.2mm wall thickness, Top mounting plates and brackets 2mm wall thickness. All metal parts shall be painted with epoxy-polyester powder coating, oven-cured.Clearance: Minimum knee clearance of 620 mm.Polypropylene buffers fitted at bottom under each leg for making the floor scratch resistant. The fitting will be KD fittings format like Minifix and barrelnut.PVC Edge Banding: Matching 2 mm thick PVC edge banding on exposed tabletop edges and all other surface of plywood shall have 0.8mm PVC edge banding. Edge banding with hot pasted Edge Banding Machine. Corners radiused, no visible glue line.Workmanship: The table shall be rigid, level, stable and free from wobbling, delamination and loose joints.Plywood: ARCHIDPLY/ CENTURY PLY/GREEN Ply. Laminates: Archidlam/ Century / Greenlam/ MerinoHardware: Hettich/ Yale / Doorset/ Hafele/ ebco. Approval: Physical samples of plywood, Design, laminate, color and finished wood to be approved before production. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
TodayBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender