Rural Development Government Departments Closing in 14 days TDR #58602665

Tender For Construction Of Ugup High Secondary School Building At Hanumantpur Chandrapur In The District Of Rayagada For The Year 2024 25.

Issued by Government Departments · Rayagada, Odisha
Tender Value
1.35 Crore
Estimated cost
Bid Submission
04 Dec 2026
14 days left
EMD
1.35 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Rayagada → Odisha
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Construction Of Ugup High Secondary School Building At Hanumantpur Chandrapur In The District Of Rayagada For The Year 2024 25.

BOQ

Name of Work:- Construction of UGUP High Secondary School Building at Hanumantpur Chandrapur in the district of Rayagada for the year 2024 25.
Sl. No. Item Description
1Earth work in excavation in hard or gravelly soil with initial lead and lift including dressing the sides & leveling the bed of the foundation to the required width & required depth including dewatering if necessary and stacking the excavated materials away from working area etc.complete and as per specification and direction of Engineer in charge.
2Supplying, filling in foundation and plinth with sand in layers well watered and rammed including cost, conveyance, royalty of all the materials required for the work labour with T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-Charge.
3Providing cement concrete (1:3:6) in foundation and plinth using 4cm size clean hard black granite metal of approved quality from approved quarry including hoisting, lowering and laying in layers not exceeding 15cm thick to the required level, ramming watering and curing etc.complete including cost, conveyance, royalty taxes of all the materials required for the work with all labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-Charge.
4Providing, lifting, hoisting and laying Reinforced cement concrete of M-20 grade as per approved designs and drawings having a minimum compressive strength (in work test) 250 Kg. / Square cm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 516 using 12 mm. to 20 mm. size black hard crushed broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned ( 20mm. size chips not to exceeds 25 % ) to be mixed in concrete mixture with Portland slag cement (PSC) including hoisting, lowering, laying and compaction concrete by using vibrators, watering and curing for 28 days, centering and shuttering then after dismantling and removing debris from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties and taxes of all materials and cost of all labours, sundries, T & P required of the work etc. complete in all respect as directed by the Engineer-in-Charge. But excluding cost and conveyance of M.S. rods or Tor steel and binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or tor steel tying the grills and placing in proper position. Coloumn Base & Footing
5In Column & Roof Beams
6Head Room
7Plinth beams / Tie Beam
8Lintels
9Chajja
10Staircase
11Roof Slab
12Head Room
13Top Copping
14Providing HYSD bar reinforcement for R.C.C. work including Straightening,Cutting, bending, binding and tying the grills and placing in proper position as per drawing and design including cost, conveyance and taxes of M.S rods and binding wire with all labour T&P and cess required for the work etc. complete in all respect in all floors (weight of binding wires will not be considered as measurement of M.S rods) as per specification and direction of the Engineer-in-Charge.
15Head Room
161st class Fly ash brick masonry in cement mortar (1:6) in Foundation & Plinth using clamp burnt bricks of 9\\" size having a crushing strength of not less than 75 kg./sq.cm including splays cutting, circular moulding, chamfering and cur belling, watering and curing etc. complete including cost, conveyance, royalty, taxes of all the materials required for the work with all labour, T&P etc. complete in all respect as per specification and direction of the Engineer-in-charge.
171st class Fly ash brick masonry in cement mortar (1:6) in super structure using clamp burnt bricks of 9\\" size having a crushing strength of not less than 75 kg./sq.cm including splays cutting, circular moulding, chamfering and cur belling, watering and curing etc. complete including cost, conveyance, royalty, taxes of all the materials required for the work with all labour, T&P etc. complete in all respect as per specification and direction of the Engineer-in-charge.
18Head Room
1912mm thick Cement plaster in C.M (1:6) to brick work finished smooth including watering curing and scaffolding with cost, conveyance, royalty, taxes of all the materials required for the work with all labour, T&P etc. complete in all respect as per specification and direction of the Engineer-in-charge.(Outside Surface) G.F
20Head Room
2116mm thick Cement plaster in C.M (1:6) to brick work finished smooth including watering curing and scaffolding with cost, conveyance, royalty, taxes of all the materials required for the work with all labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-Charge. (Inside Surface) G.F
22Head Room
236 mm thick C.P. (1:4) to RCC surfaces finished smooth including closed deep chiping and slury treatment , watering, curing cost, carriage & royalty of all materials, cost of all labour, etc complete as per the direction of E.I.C.
24Head Room
25Supplying, fitting and fixing Vitrified tile in floors of approved make confirmating to IS:13755 laid on 20 mm thick cement mortar (1:4) and filling joints with white cement of approved quality including cost of all materials, etc. required for the work all complete as per direction of E.I.C. Ground Floor
26Providing and fixing Vitrified tiles in dados, skirting and rises of steps on 12mm th cement plaster (1:3) (1cement:3sand) joined with neat cement slurry mixed with pigment to match the shade of tiles, rubbing, polishing including cost of tiles, conveyance, taxes & labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge.
27Supplying, fitting & fixing of Granite Tiles of minimum Above 0.40 sqm. (20mm thick) of approved make in floors laid on 20 mm thick cement mortar (1:4) and filling joints with slurry including cost of all materials, labour T&P etc. required for the work all complete incl. rubbing as per direction of the Engineer-in-chargeGround floor
28Priming 1 coat with wall primer water bond cement primer including all labour, materials etc. complete. Ground Floor
29Head Room in 12 CP
30Head Room in 16 CP & 6 mm CP
31Finishing surface of walls with Cement Based Wall Putty (Water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding, staging charges with cost of all materials taxes, labour T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge.(Ground Floor)
32Wall painting two coats with plastic emulsion paint of approved shade over a coat of priming on new work to give an even shade with approved shade with cost, conveyance, taxes of all the materials required for the work and labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. (Ground Floor)
33Head Room
34Wall painting two coats with Weather seal paint of approved shade over a coat of priming on new work to give an even shade with approved shade with cost, conveyance, taxes of all the materials required for the work and labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. (Ground Floor)
35Head Room
36Supplying, fitting and fixing of M.S doors and windows shutters of approved design in proper position making good to the damges of walls of R.C.C or other structural etc. including mending or cutting sizes or grooves in chaukhats with cost, conveyance, taxes of all materials required for the work, labour and T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. Door
37Head Room
38Supplying, fitting and fixing of M.S doors and windows shutters of approved design in proper position making good to the damges of walls of R.C.C or other structural etc. including mending or cutting sizes or grooves in chaukhats with cost, conveyance, taxes of all materials required for the work, labour and T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. Window
39Head Room
40Supplying fitting and fixing of Stain less steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with balustrade of size 32mm x 32mm x 2mm @ 0.90mtr c/c and stain less square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc. including cost of all materials, taxes, labour, T&P, cess, and hire charges of drilling machine, labour charges etc. complete in all respect as per specification and direction of the Engineer-in-charge.
41Factory made 30mm/32mm flush door shutter (nonsal hard wood framefixed with 4mm BWR ply on both side of frame) with all labour, iron fittings, and wooden hinged cleats etc fitted and fixed complete in all respect. (Ground Floor)
42Supplying, fitting and fixing of two track UPVC sliding window of approved make with 6mm thick glass of approved quality with frame, shutters and all fittings and fixtures etc complete including cost, conveyance, taxes, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. (Ground Floor)
43Priming one coat with any approved primmer (To Receive Enamel paint) including cost of primer & labour to give an even shade etc. complete.Ground Floor
44Head Room
45Providing and painting two coats over wood/steel surface with approved shade and quality to enamel paint over a coat of primer of approved quality in all floors and all heights including preparing the surface, watering and curing with cost, conveyance, royalties and taxes of all materials and cost of all labour, scaffolding, sundries and T&P. etc. required for the work etc. complete as directed by the Engineer in charge.
46Head Room
472.5cm thick grading concrete of proportion (1:2:2) on roof slab with 6mm thick hard black granite chips of approved quality from approved quarry including watering and curing etc.with cost, conveyance, royalty taxes of all the materials required for the work with all labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge.
48Head Room
49P.H WORKS30 User septic tankEarthwork in all kinds of soil in excavation of foundation trenches within 50m initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth etc all complete as per direction of the E.I.C.Initial lift upto 1.5 mtr4.36 m x 3.17 m x 1.50 m=20.731 cum
50From 1.5 mtr to 3.0 mtr depth 4.36 m x 3.17 m x 0.70 m=9.674 cum
51Supplying all materials, labour, T&P and filling in foundation and plinth with river sand well watered and rammed including conveyance of all materials to work site, payment of royalty, taxes etc all complete as per the direction of the E.I.C. 4.36 m x 3.17 m x 0.15 m=2.073 cum
52Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 40mm H.G metal including watering, curing and conveyance of all materials to site payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. 4.36 m x 3.17 m x 0.15 m=2.073 cum
53Supplying all materials, labour, T&P and providing plain cement concrete (1:1.5:3) with 12mm size H.G chips including watering, curing and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. 4.36 m x 3.17 m x 0.10 m=1.382 cum+ 3.12 m x 1.93 m x 0.038 m = 0.228 Cum
54Supplying all materials,labour, T&P and providing Brick work with K.B.Brick having crushing strength not less than 75 Kg/CM2 with dimensional tolerence of +/- 8% in C.M including watering, curring, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.In Foundation and Plinth in C:M (1:4) 2 x ( 4.06 + 1.93 ) m x 0.47 m x 1.10 m = 6.193 cum + 2 x ( 3.82 + 1.93 ) m x 0.35 m x 0.80 m = 3.220 cum
55In Foundation and Plinth in C:M (1:6) 1 x 0.40 m x 0.40 m x 0.60 m = 0.096 cum
56Supplying all materials, labour, T&P and providing cement plaster on brick/stone work including watering,curring and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.12 mm thick C.P in C:M (1:3)2 x ( 3.12 + 1.93 ) m x 1.90 m =19.19 sqm + 2 x ( 3.12 + 1.93 ) m x 1.90 m =19.19 sqm + 2 x ( 3.12 + 1.93 ) m x 1.90 m =19.19 sqm + 3.12 x 1.93 m = 6.021 sqm + 4 x 0.40 x 0.60 m = 0.96 sqm
57Supplying all materials, labour, T&P and providing cement punning on plastered surface including watering,curring and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. Same as above item 20mm C.P in 1:3
58Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for RCC work including false work and dismantling them after casting including conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the Engineer-in-charge.2 x (3.82 + 2.63 ) m x 0.125 m =1.612 sqm + 3.12 x 1.93 m = 6.021 sqm
59Supplying all materials, labour, T&P and providing M.S.reinforcements for RCC work including cutting, bending, binding, straightening and tying the grills and placing in position including cost of binding wire 18 to 20 gauge conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the Engineer-in-charge.
60Supplying all materials, labour, T&P and providing Reinforced cement concrete (1:1.5:3) with 12mm size H.G chips including watering, curing and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.3.82 m x 2.63 m x 0.125 m
61Supplying all materials, labour, T&P and making M.S. Step Iron in 8mm Dia M.S Steel bars and fixing into walls of Manhole/ Septic Tanks duly embeded in C.C(1:2:4) etc all complete as per P.H specification and direction of the E.I.C.
62Supplying all materials, labour, T&P and providing 50mm thick pre-cast R.C.C. baffle wall in R.C.C(1:1.5:3) including reinforcement cage using 12mm size HG chips fitted and fixed in position, finished smooth etc. complete including cutting grooves and mending good the damages etc all complete as per P.H specification and direction of the E.I.C.2.2 m x 0.45 m
63Supplying all materials, labour, T&P and providing 160mm dia P.V.C Tee inside the septic tank including cutting holes and duly embeded in P.C.C(1:1.5:3) using 12mm size HG chips fitted and fixed in position and mending good the damages etc all complete as per P.H specification and direction of the E.I.C.
64Supplying all materials, labour,T&P and providing 12mm thick cement flush pointing in C:M (1:3) to Brick Masonry works including watering curring and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the Engineer-in-charge.2 x ( 4.06 + 2.87 ) m x 1.10 m = 15.246 Sqm + 2 x ( 3.82 + 2.63 ) m x 0.80 m = 10.32 Sqm + 2 x ( 4.06 + 2.63 ) m x 0.125 m = 1.672 Sqm
65Supplying all materials, labour,T&P and filling Foundation and Plinth with excavated earth including watering, ramming etc all complete as per direction of the E.I.C.
66Supplying all materials, labour, T&P and constructing Manhole Chamber of the following sizes with cement concrete (1:3:6) using 40 mm size HG metal on bed, 1st class KB Brick work in CM (1:6) moulding and shaping the channel inside and benching with C:C (1:1.5:3) using 12 mm size H.G chips, 12 mm thick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, RCC cover slab in C.C(1:1.5:3) using 12 mm size H.G chips with RCC man hole cover, earth work excavation in all kinds of soil and refilling the cavity around the camber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as per approved specification and direction of E.I.C
67Supplying all materials labour T&P and cutting holes through brick/stone masonry works including making good the damages in cm (1:4) for taking H.C.I/PVC pipes and fittings etc. all complete as per PH specification and direction of EIC.250mm thick wall
68375mm thick wall
69Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damages as per direction of the E.I.C.
70Supplying all materials labour T&P and fitting & fixing UPVC SWR soil waste ventilating pipes and fittings of the following OD conforming to ISI No.13591/1992 to walls with nails bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method as per manufacturers specification testing e. w. in excavation in all kinds of soil and refilling of trenches as per direction of EIC 110mm dia UPVC SWR Pipe with rain water piping (.Ashirvad / Supreem / Oriplast / Hariplast)110mm dia UPVC SWR Pipe
71110mm dia U-PVC S. Trap
72110mm dia U-PVC P. Trap
73110mm U-PVC S/J with Door
74110mm U-PVC door bend
75110mm dia U-PVC Plain bend
76125mm dia CP Grating
77110mm U-PVC Plain Tee
78110mm U-PVC Cowl
7975mm dia U-PVC SWR Pipe
8075mm dia U-PVC Plain Tee
8175mm U-PVC Door Bend
8275mm U-PVC Plain Bend
83Supplying all materials labour T&P and constructing gully trap chamber of the following inside size with 8cm thick RCC precast cover slab in cc (1:1.5:3) using 12mm size hg chips foundation concre3te(1:3:6) using 40mm size hg metal on bed and around trap FLY ASH Brick work in cm (1:6) in F&P and inside 12mm thick cp (1:3) finished with a floating coat of neat cement including fixing 100mm size HCI gully trap and grating etc. all complete as per approved drawing specification and dir of EIC.Inside size 250mmx250mm gully trap
84Supplying all materials, labour T&P and construction of Inspection chamber of the following sizes with c.c.(1:3:6) using 40mm size hg metal on bed, FLY ASH Brick work in cm(1:6) moulding and shaping the channel inside and benching with c.c. (1:1.5:3) with punning to inside cement flush pointing (1:3) to outside RCC cover slab in cc (1:1.5:3) using 12mm size hg chips with RCC m. h. cover, e. w. in excavation in all kinds if soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to site payment of royalty taxes etc. all complete as per approved specification and direction of EIC.Inside size : 760 x 760 x 460mm Inspection Chamber
85Supplying all materials labour T&P and construction soak way pit of the following sizes with dry brick walling from bottom upto invert of inlet pipe and FLY ASH Brick work in cm(1:6) for the remaining height at top 12mm thick cp (1:4) inside and outside over masonry brick work gravel packing the rear of well staining RCC cover slab in c.c. (1:1.5:3) using 12mm size hg chips fitted with iron lifting handles including e.w. in open well excavation in all kinds if soil and refilling the cavity around the pit and painting the iron works, watering, curing, conveyance of all materials to work site payment royalty, taxes etc. complete as per approved drawing specification and direction of EIC. 1.0m dia x 2.00m deep soak way pit
86Supplying all labour materials T&P and laying of UPVC soil waste pipe of the fo0llowing internal diameter confirming to IS in trenches of the depth upto 1.2mtr including jointing with supply of approved rubber, lubricant by non heat application method on bending with 150mm thick cc (1:3:6) using hg metal of 25mm to 40mm and then making all-round encasing including earth work excavation in all kinds of soil, refilling the trenches watering, curing, conveyance of all materials to site payment of royalty, taxes etc. & testing all complete as per PH sp and dir of EIC.110mm dia with allround encasing
87Supplying all materials, labour, T&P and providing, laying soakway gallary with SW/PVC pipes, jointing lead loose packed allround with stone boulders 50mm to 150mm other than granite, covered at top with a layer of flat tiles 300mmx300mmx25mm including earthwork in excavation of trenches in all kinds of soil to an average depth of 1.5 mtr, covering of earth at the gallary top etc. all complete as per approved drawing and direction of the E.I.C.160 mm dia PVC gallary
88Providing and fixing Chlorinated polyvinyl Chloride (CPVC) Pipes conforming to I.S 15778 having the thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1.00 mtr spacing, this includes jointing of pipes and fittings with one step solvent cement and testing of joints etc all complete as per direction of the E.I.C. Suprem/Ashirbad20 mm dia C-PVC Pipe( Internal)
8925mm dia C-PVC Pipe (Internal)
9032 mm dia C-PVC Pipe(External)
9140mm dia C-PVC Pipe (external)
92Supplying all materials labour T&P and fixing water storage sintex tanks including and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting and placing the to the required position, including cost of tank conveyance and taxes of all materials to work site etc. all complete as per PH specification and direction of EIC. 2000 lit sintex tank (G Floor)
93Supplying all materials labour T&P and construction of masonry staging with providing 1st KB brick work in cm (1:6) of 0.40mtr height in staging and in circular protection wall to support to the tank 12mm thick cement plaster in cm (1:4) over brick work RCC beam of 2.61 x 0.25x0.30 using cc (1:1.5:3) using 12mm chips including centering and shuttering curing, conveyance of all materials to work site etc. all complete as per sp and dir of EIC.2000 ltr capacity tank G Floor
94Supplying of ISI mark 1.00 HP single phase vertical submersible pump set with discharge of 900-1000 ltr/hour and a head of 50-60 mtr of reputed make like KSB/Texmo & Equivalent including all cost, conveyance and taxes etc. all complete as per direction of E.I.C.
95Supplying all labour T&P and fitting and fixing of 1.00HP single phase verticaql submersible pump set with commissioning and testing etc. all complete as per direction of EIC.
96Supplying and fitting and fixing of ISI mark DOL starter of reputed make like BCH or equivalent for 1.00HP single phase submersible pump including all cost, conveayance and taxes etc. all complete as per direction of EIC.
97Supplying and fitting and fixing of three core flat cable (1.5mm2) of ISI make of reputed company like BCH/Finolex or equivalent and connecting the pump and starter including all cost, conveyance and taxes etc. all complete as per direction of EIC.
98Supplying and fitting and fixing jof plastic rope, MS well cover, MS clamp, stainless steel short piece, bend & socket including all cost, conveyance and taxes etc. all complete as per direction of EIC.
99Supplying and fitting and fixing of HDPE pipes and pipe fittings with making connection to pump set including all cost, conveyance and taxes etc.all complete as per direction of EIC.32 mm dia HDPE Pipe(Internal Pipe)
100BORE WELL (200MM X 150 MM DIA)Labour for drilling a perfectly bore holes as specified dia for a specified defth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit the site condition as per direction of engineer incharge including use of own rig with its accessories, tools and plants and consumables etc. for lowering of 200 mm dia PVC/G.I./M.S. pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (PVC/G.I./M.S) casing pipes if required to prevent collapse of over borden is to be provided by the contractor including lowering and withdrawing after completion of the tube well. 2 NOsa) Labour for Drilling i) 0.00 mtr to 91.00 mtr & above
101Lowering the following size of G.I./PVC housing pipe with or without slotted pipes as per necessity from ground level upto 30.00m depth and fitted and fixed up in perfectly vertical position including cutting and threading of pipes and slotted pipes and supplying and fixing all jointing materials, tools and plants complete and keeping the top of casing pipe threading including plugging tube well to prevent entry of foreign materials from above (G.I./PVC) supplied by the contractor (including cost of casing pipe. a) Lowering of 200 mm dia PVC casing pipei) From 0 mtr to 30.00m and above
102b) Cost of 150mm dia PVC casing pipe (80 Sch)i) From 0 mtr to 30.00m and above
103Cleaning and developing the tube well using their own compressor continuously worked till clean and adequate discharge as obtained from the tube well including supply of and use of all necessary equipments and labour as per the direction of engineer incharge.
104Supplying, all materials, labour, T&P and providing and fixing ISI marked Deep Well Hand Pump Standard HWDP conforming to IS-15500/04 Part-II complete with accessories alongwith 8 nos of connecting rod made of bright bar electro galvanized of 12mm dia of 3 mtr long with coupler and fitted with stand assembly including fitting and fixing and lowering of Hand Pump set at the Tube well with necessary length of riser pipes including carriage and conveyance of all materials and T&P etc all complete as direction of E.I.C.
105Supplying all materials, labour, T&P and constructing tubewell Platform as per UNICEF design with drain and specification with C.C (1:2:4)using 12 mm size C.B H.G chips embedding pedestal base concrete of 76x76x40cm size, outer and inner diaplatform 1.85m and 1.65 m respectively with 0.10m, height walling, footrest size1.0mx1.0m including earthwork in all kinds of soil, centering and shuttering, laying concrete, plastering and punning, watering and curing finished smooth including cost, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per approved specification and direction of the E.I.C.1.85 m dia tubewell platform
106Factory made FRP(alternately called GRP) door frame of size 75mmx100mm fabricated using E-glass Chopped Strand Mat (CSM) U.V stabilised Inopthalic Gelcoat and impregnated with Inopthalic resin. The finish of door frame will be plain colour white/ Ivory/ Beige/ Light grey/ Golden brown/Mahogany/ Teak wood/sand stone/Champagne/Pastel blue or any other colour using high quality pigments complete in all respect as per specification and direction of the E.I.C Door -6x ( 2.10 + 2.10 + 0.75 ) =29.70
107Factory made single leaf rigid FRP(alternately called GRP) sandwich composite door shutter of 32mm thick laminated with two GRP skins with wood grain finish fabricated using UV-stabilised Isopthalic Gelcoat and one layer of 450 gsm E-glass Chopped Strand Mat (CSM) impregnated with orthopthalic palyester resin. Wooden reinforcements made of seasoned sal wood block of cross section not less than 28mmx32mm and also necessary sal wood reinforcements for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, the sal wood reiforcements and the skins. The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre's standards and specifications and the door shutters tested in conformation to IS: 4020-1998. The finish of door shutter will be plain colour white/ Ivory/ Beige/Light grey/ Mahogany/Teak wood or any other colour using high quality pigments. Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter. Door -6 x 2.05 x 0.72 =8.856
108Supplying all materials labour T&P and fixing Ceramic tiles in floors. Treads and landing on 25mm thick bed of cement mortar (1:1) joined with neat cement slurry mixed with pigments to match the3 shades of the tiles including rub bins and dir of EIC. Ground Floor 2x7.01m x 2.74m= 38.41 sqm + 7 x 0.75m x 0.30m= 1.57 sqm (-) 1 X 0.58m X 0.44m= 0.255Sqm
109Supplying all materials labour T&P and fixing porcelain glazed tiles/Marble tiles /Kota /Kodappa tiles in walls / dados skirting on 12mm thick cp (1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles including rub bins and polishing complete as per direction of EIC. Ground Floor Wall = 2 x8.48m x 2.10m= 35.61 sqm + 5 x 5.0m x 2.10m= 52.50 sqm + 1 x 4.64m x 2.10m= 9.74sqm + 2 x 1.50m x 2.10m= 6.30 sqm + 1x 2.50m x 2.10m= 5.25
110Supplying all materials, labour, T&P and fixing water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:4:8) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrest etc all complete as per specification and direction of the E.I.C.
111Supplying all materials, labour T&P and fixing Wash Down Water Closet(Europeon type W.C. pan) with Integral S trap to the floor with wooden plug and C.P.screws including jointing the trap with soil pipe in C.M.(1:1) etc. all complete as per specification & direction of E.I.CE..W.C. with S trap plain(Neycer/ Parry ware/ Cerra) single unit
112Providing & Fixing wall Mounted Grab Bar 600 mm long including making good the damages, including cost of all materials completed as per specification and direction of the E.I.C.
113Supplying all materials labour T&P and fixing wash basins with hole for pillar taps with CI/MS brackets painted white including holes in walls and making good the damages etc .all compt. As per PH sp. And dir. Of EIC.550x400mm WHB-( Paryware/Nycer/ cerra )
114Supplying all materials, labour, T&P and fixing pedestrial for wash hand basin complete recessed at the back for the reception of pipes and fittings etc all complete as per specification and direction of the E.I.C.Porcelain Pedestal
115Supplying all materials labour T&P and fixing mirror of superior glass mounted on 6mm thick AC sheet or plywood sheet and fixed to wooden plugs with cp screws and washers compt. As per PH specification and direction of EIC.B.E Mirror
116Supplying all materials labour T&P and fixing standard size cp towel rail/ring compt. with cp brass brackets fixed to wooden plugs with cp screws as per PH specification and direction of EIC.CP Towel rail (20x600) heavy Stainless steel with Ambar make .
117CP Towel ring heavy Stainless steel with mousoumi make .
118Supplying all materials labour T&P and fixing standard size cp soap holder compt. With cp brass brackets fixed to wooden plugs with cp screws as per PH specification and direction of EIC Stainless steel with heavy good quality
119Supplying all materials, labour T&P and fitting and fixing Acraylic shelf including polishing all complete as per P.H. specification and direction of EIC. 450mmx125mm size Plate Acraylic Shelf with heavy good quality
120Supplying all materials labour T&P and fitting and fixing 10 ltr capacity low level flushing cistern with a pair of cast iron or m.s. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float, c.p. brass handle, unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia cp foush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting inlet pipe with supply main etc. all complete as per specification and direction of EIC. 10ltr Capacity Cistern ( Paryware/Nycer/ cerra )
121Supplying all materials, labour, T&P and fixing bowl pattern urinal(Hindware,Parryware,Cera) including connecting the urinal with waste pipeby means of white lead mixed with chopped hemp etc all complete as per specification and direction of the E.I.C.Half stall urinal
12215mm dia urinal Spreader
12332mm dia Dome wate
124Supplying all materials,labour, T&P and providing marble slab in urinal partition wall including cutting grooves in wall and making good the damages including watering curing etc as per specification and direction of the E.I.C 2 x 0.60m x 0.90m = 1.08 sqm
125Supplying all Materials labour T&P and fitting and fixing brass/CP Fittings ( Jaquar Make ) of the following nominal bore with supply of all jointing materials etc. complete as per PH Specification and Direction of EIC. 15mm dia cp bib cock S.B. Jaquar
12615mm dia cp bib cock L.B.
12715mm dia CP Two way bib Cock
12815mm dia CP pillar cock
12915mm dia cp angle stop cock
130Health Fuccet
13115mm dia CP flange
13215mm dia CP Extension piece
13325mm dia Brass Ball Valve
13432 mm dia Brass Ball Valve
135ELECTRICAL WORKS:Wiring ;- Recessed wiring to light point with 1.5 sq.mm FR PVC insulatedsingle core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5Amp, 250 V piano type modular switch ISI marked and ceiling rose ISI marked mounted on MS box having front Modular base & cover of suitable size , MS box with 1 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire Finolex/ L&T / Anchor / Havels /HPL/ V Guard ) -do- Group A
136-do- Group B
137-do- Group C
138Recessed wiring to Fan Point in... -do- Group B
139-do- Group C
140Recessed wiring to Exhaust Fan Point in do Group B
141S/F of Angle holder replacing Ceilling Rose
142S/F of fan hook 'S' type made of 16 mm MS rod for fixing in the Existing RCC Roof.
143Switch Boards ;- S/F of 5A. Modular Switch & 5A. Modular Socket outlet of ISI marked on existing board (1.25.1+1.25.4)
144S/F of extension board of 6 modular Metal box with modular base & cover in recess including providing and fixing of 2 nos of 3pin 5/6amp modular socket out let & 2 nos of 5/6 amp piano type modular switch, connection, painting etc as required.
145S/F of Power point with 4 modular metal box with modular base & cover in recess including providing and fixing of 6 pin 15/16 amp. piano type Modular switch & Socket, connection, painting etc as required
146S/F of 1 no of 5 pin 15/16 amp. Socket , 1 no of switch & 1 no of 15/16A top with modular mini MCB, in 6 modular box with cover with connection, painting etc as required for Inverter connection
147S/F of 18 SWG Modular metal box of following sizes (Nominal size) in recess with suitable size of Modular base & cover in front including cutting the wall and making good the same in case of recessed conduit as required. 2 Modular box with base & cover
1486 Modular box with base & cover
1498 Modular box with base & cover
15012 Modular box with base & cover
151Sub-Main:- Wiring for circuit / sub-main wiring along with earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS-694/1990 in 20mm dia non metalic heavy duty flexible conduit 1.6mm in recessed PVC conduit as required (Make of wire - Finolex/L&T/Anchor/Havels/V-guard) 2x1.5+1x1.5 (1.8.1)
1522x2.5+1x1.5 (1.8.2)
1532x4+1x1.5 (1.8.3)
1544x6+2x2.5(1:8:10)
155Inverter wiring (1x2.5smm) Copper wire (1.19.11A)
156Circuit Breakers & BDB:- S/F of 'B/C/D' series SP MCB of 5 - 32A amp rating (As per direction of engineer in charge) 240Volt for lighting and other loads in the existing MCB Distribution board ISI marked complete with connection, testing and commissioning etc. as required single pole (SP) (2.6.1)
157S/F of 'C' series 4 Pole MCB of 63A amp rating (As per direction of engineer in charge) 440Volt for lighting and other loads in the existing MCB Distribution board ISI marked complete with connection, testing and commissioning etc. as required without MCB box.
158S/F of 4 way (4+12) TPN MCB DB Single door (2.5.1)
159Earthing:- Earthing with G.I. Earth pipe 3 mtr Long 40mm dia ISI marked including accessories & providing masonary enclosure with cover plate having locking arrangement & watering pipe with charcoal & salt as required (3.2)Earthing with G.I. Earth pipe 3 mtr Long 40mm dia ISI marked including accessories & providing masonary enclosure with cover plate having locking arrangement & watering pipe with charcoal & salt as required (3.2)
160Supply & laying 6 SWG G.I. wire in recess for loop earthing as required (3.17)
161Fittings :- Providing & fixing plain 16/0.2mm twin twisted flexible, FR PVC insulated copper cable in polythene sleeve or conduit of suitable size on the floor/wall or side of the table/door etc as required.(1.31)
162S/F of 300mm double ball bearing with metal body Exhaust fan Copper Winding having air delivery >1600 m3/min (Make Usha-Aero Clean Plus DBB/ Polycab-Fresh on DBB/ Cropmton-Trans Air12\\" reversible/ Havells-Ventil Air DS(HS)/ Anchor-Anmol Delus R/ Orient-Power Flow DBB ) With all acessories and Connection etc as required as per direction of Engineer in Charge ,Replace Warrenty will be two Years .
163S/F of 18-25 wt. LED single strip tube. Light fittingwith all accessories & connection (make Havels/HPL/Crompton/Polycab/PAC)
164SITC of 1200mm sweep A.C Ceiling fan (1Star) Copper Winding with Aluminium Blades having air delivery > 225m3/min without fan regulator(Make:Usha-Striker One/Neo/Crompton- highspeed/Havells-Samrat ES/Anchor- Turbo Speed Star/Orient-Summer Breeze Pro/ Great White-ALDOUS/Pollycab-Vital HS) including wiring the down rod of Standred length(upto 30cm) with 1.5 mmsq PVC insulated single core multistrand Copper Conducter etc as required as per direction of Engineer in Charge ,Replace Warrenty will be two Years .
165Fixing /I.T.C. of stepped type Modular regulator (1.25a)
166S/F of 20mm dia down rod with all accessories (1.39+1.41)
167S/F of 60 wt. LED St. Light fitting with LED Electronic driver with all accessories & connection( Make- Crompton/Phillips/HPL/Polycab/Havells )
168S/F of 12w Watt LED Bulb
169S/F of portico lamp.
170Cables Provision of 40mm dia HDPE pipe for laying & protection of cable
171Provision of Armoured cable size 3 1/2 x 35sqmm (25)
172Laying of MV cable upto 25sqmm in ground (5.1.1)
173Laying of MV cable upto 25sqmm on surface (5.5.1)
174PanelsSupply & fixing of 100 A TPN Panel board 1. 100A MCCB (Make- Legrand/Seimens/L&T/C&S/) & 100A kitkat & bus bar2. 32 A TPN MCB (Make- Legrand/Seimens/L&T/C&S/)- 2nos 3. 32A DP MCB (Make- Legrand/Seimens/L&T/C&S/)- 5 nos 4. 100 A 4P Manual changeover (Make- Legrand/Seimens/L&T/C&S/)- 1nos5. Digital Volt meter & Ameter three phase 6. All accesories & Connection (Rating & Danger borad) Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58602665
AUTHORITY Government Departments
TENDER VALUE 1.35 Crore
LAST DATE 04-12-2026
Authority
Authority Name Rural Works Department
Work Description Tender for Construction Of Ugup High Secondary School Building At Hanumantpur Chandrapur In The District Of Rayagada For The Year 2024 25.
Basic Detail
Tender No NCB 17 RWC RGDA 2026 27
Bidding Type Tender
Location
City Rayagada
State Odisha
Key Dates
Publish Date 18 Nov 2026
Submission Date 04 Dec 2026
Open Date 05 Dec 2026
Finance
Tender Value 1.35 Crore
Tender Fee 10000
EMD 1.35 Lakhs
Exemption Available
Document List
a14d35c7-488d-47e3-865d-e3800ecc0ae2.html
BOQ_622164.xls
Tendernotice_1.pdf
Tendernotice_2.pdf
Tendernotice_3.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 18, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 04, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 14 days
Dec 05, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 15 days

Tender Documents

Download All (ZIP) ↓
html

a14d35c7-488d-47e3-865d-e3800ecc0ae2.html

xls

BOQ_622164.xls

pdf

Tendernotice_1.pdf

pdf

Tendernotice_2.pdf

pdf

Tendernotice_3.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender