Rural Development Government Departments Closing in 12 days TDR #58602664

Tender For Construction Of New Secondary High School At Serango Under Gumma Block In The District Of Gajapati For The Year 2025-2026.

Issued by Government Departments · Gajapati, Odisha
Tender Value
1.20 Crore
Estimated cost
Bid Submission
04 Dec 2026
12 days left
EMD
1.20 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Gajapati → Odisha
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Construction Of New Secondary High School At Serango Under Gumma Block In The District Of Gajapati For The Year 2025-2026.

BOQ

Name of Work:- Construction of New Secondary High School at Serango under Gumma block in the district of Gajapati for the year 2025-2026.
Sl. No. Item Description
1Diluting and injecting chemical emulsion (to be supplied free of cost at site of work) for PRE CONSTRUCTIONAL Anti-termite treatment and creating a continuous chemical barrier under and all-round the column pits, wall trenches, basement excavation, top perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surroundings of pipes and conduits etc. complete as per specifications (plinth area of the building at ground floor only shall be measured for payment) including cost of all materials, labour, T&P etc complete in all respect and as per direction of the Engineer-in-charge.
2Earth work in excavation of foundation trenches in hard soil including dressing of sides and levelling the bed up to the required depth and depositing the excavated materials away from the work site within 50m initial lead & 1.5m initial lifts with sundries & T&P required for the work complete including cost of all labour,labour cess,T&P,sundries etc. as directed by the Engineer in charge.
3Supplying and filling in foundation and plinth with good quality river sand including watering, ramming with cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P required for the work etc. complete as per specification & direction of Engineer-in-charge
4Providing and laying plain cement concrete of proportion (1:3:6) in foundation and floors using 4 cm. size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality and from approved quarry including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm. thick in each layer including cost, conveyance, royalties, taxes of all materials and cost of all labours,labour cess, T&P etc complete as per the direction of the Engineer-in-charge.
5Plain cement concrete (1:2:4) using 12mm size black hard crusher broken granite chips of approved quality from approved quarry including hoisting, lowering and laying concrete in layers, watering, curing etc. complete including cost, conveyance, royalties and taxes of all materials with labour,labour cess and T&P etc. required for the work complete as per the direction of the Engineer-in-charge.
6Fly Ash brick masonry in cement mortar (1:6) in foundation & plinth using Fly Ash bricks of 25 x 12 x 8 cm size having a crushing strength of not less than 75 kg./sqcm with dimensional tolerance ± 2% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing after immersing the bricks in water at least for six hours before use including cost, conveyance, and royalties of all materials with all labour,labour cess and T & P required for the work complete in all respect as per direction of Engineer-in-Charge
7Fly Ash brick masonry in cement mortar (1:6) in super structure using Fly Ash bricks of 25 x 12 x 8 cm size having a crushing strength of not less than 75 kg./sqcm with dimensional tolerance ± 2% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing after immersing the bricks in water at least for six hours before use including cost, conveyance, royalties and taxes of all materials with all labour,labour cess and T & P required for the work complete in all respect as per direction of Engineer-in-Charge. Ground Floor
8Head Room
9Fly Ash brick masonry in cement mortar (1:4) in super structure using Fly Ash bricks of 25 x 12 x 8 cm size having a crushing strength of not less than 75 kg./sqcm with dimensional tolerance ± 2% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing after immersing the bricks in water at least for six hours before use including cost, conveyance, royalties and taxes of all materials with all labour,labour cess and T & P required for the work complete in all respect as per direction of Engineer-in-Charge. Ground Floor
10Providing, lifting, hoisting and laying Reinforced cement concrete of M-20 grade as per approved designs and drawings having a minimum compressive strength (in work test) 250 Kg. / Square cm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 516 using 12 mm. to 20 mm. size black hard crushed broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned ( 20mm. size chips not to exceeds 25 % ) to be mixed in concrete mixture with Portland slag cement (PSC) including hoisting, lowering, laying and compaction concrete by using vibrators, watering and curing for 28 days, centering and shuttering then after dismantling and removing debris from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties and taxes of all materials and cost of all labours, sundries, T & P required of the work etc. complete in all respect as directed by the Engineer-in-Charge. But excluding cost and conveyance of M.S. rods or Tor steel and binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or tor steel tying the grills and placing in proper position. GROUND FLOORFooting
11Column
12Plinth Beam
13Lintel
14Floor Beam
15Chajja
16Staircase
17Floor Slab
18Head RoomColumn
19Floor Beam
20Floor Slab
2125mm thick CC 1:2:2 with 6mm size CB chips for grading concret over roof slab etc. complete. Head Room
22Supplying Cutting, straightening coiled or bent up M.S. Rod or tor steel of primary steel producers such as SAIL / TATA / RINL / JINDAL STEEL / SHYAM STEEL (grade Fe-500D) etc. including bending, binding, welding and jointing if necessary and tying the grills and placing in position as required for R.C.C. Work and for providing fan hooks as required, hoisting, lowering, laying including cost, conveyances of M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors with labour cess etc. (payment will be made on standard weight of B.I.S. for M.S. Rods or tor steel only) etc. complete as per specification & direction of Engineer-in-charge. Ground Floor
23Head Room
24Providing 12 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge. Ground Floor
25Head Room
26Providing 16 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge. Ground Floor
27Head Room
28Providing 6 mm thick cement plaster with cement mortar of mix (1:4) with screened and washed sharp sand for mortar and finished smooth to R.C.C. work after closed deep chipping & slurry treatment including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge. Ground Floor
29Head Room
30Priming 1 coat with wall primer water bound cement primer including all labour, materials etc. complete. Ground Floor
31Head Room (OUTER)
32INNER
33Wall painting 2 coats with plastic emulsion paint of approved shade on new work to give an even shade including cost of paint etc complete. Ground Floor
34Head Room
35Wall Painting two coats with approved Distemper including all labour, materials etc. complete. Ground Floor
36Head Room
37Wall painting two coat with any approved weather coat paint including cost of all materials, labour and T&P require for the work etc. complete as directed by the E.I.C. Ground Floor
38Head Room
39Supplying, fitting and fixing vetrified tiles of premium grade having thickness 8mm to 10mm confirming to IS 15622-2006 (Group-B) of size 600mm x 600mm Color / Printed series (Homogenous) of approved make (JOHNSON /OASIS / SOMANY/ KAJARIA or equivalent ) in floors on 20mm thick bed of C.M. (1:4) (1cement:4course sand) and filling the joint with white cement mixed with pigment to match the shades of the tile including cost of all materials, taxes, labour, labour cess, T&P etc. required for the work complete in all respect as directed by the Engineer in charge.Ground Floor
40Fixing Vitrified tiles in dados skirting and risers of steps on 12mm thick CP (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including cost, carriage, cost of all labour etc. complete. Ground Floor
41Supplying, fitting & fixing of Chequered tiles in floors of approved make laid on 20 mm thick cement mortar (1:4) (1 cement : 4 course sand) and filling joints with slurry including cost of all materials, labour T&P etc required for the work all complete as per direction of the Engineer-in-charge. Ground Floor
42Supplying, fiting and fixing of 32mm thick flush door shutter with approved quality of 30mm thick BWR block board pasted with 1mm thick sunmica on both side of approved design and quality including cost of all door fitting and fixture etc. complete
43Providing and fixing of WPC Door frames with Rebate cuts and finished cross section size 75mm X 45MM OR 90mm X 50mm, including cost of all materials cost of all labour,conveyance,taxes,loading,unloading,scaffolding,staging,watering and curing, t& p ,etc complete as per the direction of engineer-in-charge .
44Supplying , fitting and fixing of two track UPVC sliding window of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures.
45Finishing plastered surfaces of walls with cement based wall putty (Water based) of approved make and finishing the surface smooth and even by sand papering to receive painting in walls, at all heights with staging wherever necessary with cost, conveyance, of all materials, cost of all labour,labourcess, all T&P etc. required for the work complete in all respect as per the direction of the Engineer-in-charge. Ground Floor
46Supplying Fitting, fixing up fully glazed aluminium framed window (sliding type) made up aluminium section 9778 as window frame, section 4095, 4096 and 9777, 3994 as shutter frame with 5mm black glass as panel fitted with rubber beading including locking arrangement including all fitting including cost of all materials, all taxes, labour, T&P excluding cost of glass etc. complete as per direction of the Engineer-in-charge. A) Cost of Al. Frame
47B) Cost of 5mm thick Black Glass including wastages
48Supplying, fitting & fixing in all floors of M.S. grills, grill gates, M.S. gates, garage door, collapsible gates with top and bottom rails, steel windows, critical frames for windows, stair case and parapet railing made out of M.S Square bar/ flat including stair case hand railing with 40mm. dia G.I.pipe etc. including painting two coats over a coat of redoxide primer as per approved drawing and design with cost of all materials & labour, taxes, labour cess, T&P, sundries etc. complete in all respect as per specification & direction of the Engineer-in-Charge. Ground floor
49Head Room
50Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance of all materials, cost of all labour,labour cess, T&P etc. required for the work complete in all respect as per direction of the Engineer-in-charge. Ground Floor
51Priming one coat with any approved primmer (To Receive Enamel paint) including cost of primmer & labour to give an even shade excluding cost of primer. Ground Floor
52Head Room
53Painting two coats with approved enamel paints of approved colour, shade over a coat of primer including sand papering, polishing the surface, cost, conveyances of all materials and cost of all labour etc, complete as per specification & direction of E.I.C. Ground Floor
54Head Room
55Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 5000 m as per Technical Specification Clause 301.5 and as per the direction of EIC.
56ELECTRICAL WORK:-Recessed wiring to light point with 1.5 sq.mm FR PVC insulatedsingle core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5Amp, 250 V piano type modular switch ISI marked and ceiling rose ISI marked mounted on MS box having front Modular base & cover of suitable size , MS box with 1 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire Finolex/ L&T / Anchor / Havels /HPL/ Kei/V Guard/Gloster ) -do- Group A
57-do- Group B
58-do- Group C
59Recessed wiring to Fan Point in... Group A (1.1.1) -do- Group B
60-do- Group C
61Recessed wiring to Call Bell Point in... -do- Group C
62Recessed wiring to Exhaust Fan Point in do Group C
63S/F of Angle holder replacing Ceilling Rose (1.29-1.28)
64S/F of fan hook 'S' type made of 16 mm MS rod for fixing in the Existing RCC Roof.
65S/F of 5A. Modular Switch & 5A. Modular Socket outlet of ISI marked on existing board (1.25.1+1.25.4)
66S/F of Extension board of 6 modular Metal box with modular base & cover in recess including providing and fixing of 2 nos of 3pin 5/6amp modular socket out let & 2 nos of 5/6 amp piano type modular switch, connection, painting etc as required.
67S/F of Power point with 4 modular metal box with modular base & cover in recess including providing and fixing of 6 pin 15/16 amp. piano type Modular switch & Socket, connection, painting etc as required
68S/F of Computer board consisting of 3 nos of 5amp modular plug and modular switch & 1 no of Mini MCB complete with wiring on 12 modular M.S. box with modular cover.
69S/F of 1 no of 5 pin 15/16 amp. Socket , 1 no of switch & 1 no of 15/16A top with modular mini MCB, in 6 modular box with cover with connection, painting etc as required for Inverter connection
70S/F of 18 SWG Modular metal box of following sizes (Nominal size) in recess with suitable size of Modular base & cover in front including cutting the wall and making good the same in case of recessed conduit as required. 2 Modular box with base & cover
714 Modular box with base & cover
728 Modular box with base & cover
7312 Modular box with base & cover
74Wiring for circuit / sub-main wiring along with earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS-694/1990 in 20mm dia non metalic heavy duty flexible conduit 1.6mm in recessed PVC conduit as required (Make of wire - Finolex/L&T/Anchor/Havels/V-guard/Kei/Gloster) 2x1.5+1x1.5 (1.8.1)
752x2.5+1x1.5 (1.8.2)
762x4+1x1.5 (1.8.3)
772x6+1x2.5 (1.8.4)
784x6+2x2.5(1:8:10)
79Inverter wiring (1x2.5smm) Copper wire (1.19.11A)
80S/F of 'B/C/D' series SP MCB of 5 - 32A amp rating (As per direction of engineer in charge) 240Volt for lighting and other loads in the existing MCB Distribution board ISI marked complete with connection, testing and commissioning etc. as required single pole (SP) (2.6.1)
81S/F of 'B/C/D' series DP MCB of 5 - 32A amp rating (As per direction of engineer in charge) 240Volt for lighting and other loads in the existing Distribution board ISI marked complete with connection, testing and commissioning etc. as required (2.6.2a)
82S/F of \\"C\\" Series 4 pole MCB of 63 A amp rating (As per direction of engineer in charge) 440 volt for lighting and other loads in the existing MCB Distribution board ISI marked complete with connection,Testing and commissioning etc as required without MCB box
83Supply, installation testing & Commissioning of M.C.B.D.B of followig coopacity on existing surface/Wall mounting & complete with inter connections earthing etc as required as per direction of Engineer incharge (Make-Seimens/HPL/L&T/Havels.) S/F of MCB 8 way Double door (2.3.6)
84S/F of 4 way (4+12) TPN MCB DB Single door (2.5.1)
85S/L of 25mm x 6mm G.I. earth strip in ground(3:10)
86Item No.4. EARTHING-Provision of maintenance free Chemical Earthing with 250 micron non corrosive copper bonded rod (CPRI Certified) of 2.4 mtr length and minimum 17.2 mm dia with provision of 25kg x 2=50kg back filling ground resistance improvement compound with ROHS certified including supply and installation of heavy duty envionmental friendly poly plastic earth pit chamber with cover as per I.E Rules .The earthing should be minimum 1.5 mtr. away from the building and the two earthings must be 10 feet apart from each other as per I.E Rules .
87Providing & fixing plain 16/0.2mm twin twisted flexible, FR PVC insulated copper cable in polythene sleeve or conduit of suitable size on the floor/wall or side of the table/door etc as required.(1.31)
88S/F of 300 Exhaust fan with all accessoriesand connections (Make Usha-Aero Clean Plus DBB/ Polycab-Fresh on DBB/ Cropmton-Trans Air12\\" reversible/ Havells-Ventil Air DS(HS)/ Anchor-Anmol Delus R/ Orient-Power Flow DBB)
89S/F of Call bell/Buzzer(Ding dong type) ISI marked suitable for DC/AC single phase 230 volts complete as required. (1.30)
90S/F of 18-25 wt. LED single strip tube. Light fittingwith all accessories & connection (make Havels/HPL/Crompton/Polycab/PAC/Orient/Panasonic)
91S/F of 1200mm A.C. Ceiling fan (1Star) with all accessories and connections with out fan regulator (Make:Usha-Striker One/Neo/Crompton- HS/Havells-Samrat ES/Anchor- Turbo Speed Star/Orient-Summer Breeze Pro/ Great White-ALDOUS/Pollycab-Vital HS)
92Fixing /I.T.C. of stepped type Modular regulator (1.25a)
93S/F of 20mm dia down rod with all accessories (1.39+1.41)
94S/F of 60 wt. LED St. Light fitting with LED Electronic driver with all accessories & connection( Make- Crompton/Phillips/HPL/Polycab/Havells Orient/Panasonic) )
95S/F of 9w Watt LED Bulb
96Provision of Armoured cable size 3 1/2 x 25sqmm (24)
97Laying of MV cable upto 25sqmm in ground (5.1.1)
98Laying of MV cable upto 25sqmm on surface (5.5.1)
99Supply & fixing of 100 A TPN Panel board 1. 100A MCCB (Make- Legrand/Seimens/L&T/C&S/) & 100A kitkat & bus bar2. 32 A TPN MCB (Make- Legrand/Seimens/L&T/C&S/)- 2nos 3. 32A DP MCB (Make- Legrand/Seimens/L&T/C&S/)- 5 nos 4. 100 A 4P Manual changeover (Make- Legrand/Seimens/L&T/C&S/)- 1nos5. Digital Volt meter & Ameter three phase 6. All accesories & Connection (Rating & Danger borad)
1002000VA/24V Invertor machine,Make-Heavy duty V-Turbo UPS-23509 (microtek)/PRIME 2250(V-GUARD)/EVO S 2300(LUMINOUS) and 180Ah tall tubular BatteryMake-Luminous /microtek/v-guard and 16A Delux plug Top with Luminous single Trolley for Inveryor Battery,2nos
101P.H WORK15 User septic tank 2Nos ST Earthwork in all kinds of soil in excavation of foundation trenches within 50m initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth etc all complete as per direction of the E.I.C.Initial lift upto 1.5 mtr, a.3.54 m x 2.54 m x 1.50 m =13.487 cum x2 Nos
102From 1.5 mtr to 3.0 mtr depth,3.54 m x 2.54 m x 0.70 m =6.294 cum x 2Nos
103Supplying all materials, labour, T&P and filling in foundation and plinth with river sand well watered and rammed including conveyance of all materials to work site, payment of royalty, taxes etc all complete as per the direction of the E.I.C.3.54 m x 2.54 m x 0.15 m =1.348 cum x 2 Nos
104Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 40mm H.G metal including watering, curing and conveyance of all materials to site payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.3.54 m x 2.54 m x 0.15 m =1.348 cum x 2Nos
105Supplying all materials, labour, T&P and providing plain cement concrete (1:1.5:3) with 12mm size H.G chips including watering, curing and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.(3.54 m x 2.54 m x 0.10 m =0.899 cum +2.54 m x 1.54 m x 0.038 m= 0.148 Cum) x 2 Nos
106Supplying all materials,labour, T&P and providing Brick work with K.B.Brick having crushing strength not less than 75 Kg/CM2 with dimensional tolerence of +/- 8% in C.M including watering, curring, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.In Foundation and Plinth in C:M (1:4) a.(2 x ( 3.24 + 1.54 ) m x 0.35 m x 1.00 m= 3.346 cum +2 x ( 3.00 + 1.54 ) m x 0.23 m x 1.00 m = 2.088 cum) x 2 Nos
107In Foundation and Plinth in C:M (1:6)1 x 0.40 m x 0.40 m x 0.60 m = 0.096 cum x 2 Nos
108Supplying all materials, labour, T&P and providing cement plaster on brick/stone work including watering,curring and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. 12 mm thick C.P in C:M (1:4),(2 x ( 2.54 + 1.54 ) m x 2.00 m =16.32sqm+2.54 x 1.54 m = 3.911 s +4 x 0.40 x 0.60 m = 0.96 sqm) x 2 nos
109Supplying all materials, labour, T&P and providing cement punning on plastered surface including watering,curring and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.(2 x ( 2.54 + 1.54 ) m x 2.00 m =16.32sqm+2.54 x 1.54 m = 3.911)x 2 nos
110Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for RCC work including false work and dismantling them after casting including conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.(2 x (3.00 + 2.00 ) m x 0.125 m =1.25 sqm+2.54 x 1.54 m = 3.911 sqm) x 2 nos
111Supplying all materials, labour, T&P and providing M.S.reinforcements for RCC work including cutting, bending, binding, straightening and tying the grills and placing in position including cost of binding wire 18 to 20 gauge conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. x 2 Nos
112Supplying all materials, labour, T&P and providing Reinforced cement concrete (1:1.5:3) with 12mm size H.G chips including watering, curing and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.3.00 m x 2.00 m x 0.125 m=0.75 cum x 2 Nos
113Supplying all materials, labour, T&P and making M.S. Step Iron in 8mm Dia M.S Steel bars and fixing into walls of Manhole/ Septic Tanks duly embeded in C.C(1:2:4) etc all complete as per P.H specification and direction of the E.I.C. 2 nos
114Supplying all materials, labour, T&P and providing 50mm thick pre-cast R.C.C. baffle wall in R.C.C(1:1.5:3) including reinforcement cage using 12mm size HG chips fitted and fixed in position, finished smooth etc. complete including cutting grooves and mending good the damages etc all complete as per P.H specification and direction of the E.I.C.1.75 m x 0.45 m x 2 Nos
115Supplying all materials, labour, T&P and providing 160mm dia P.V.C Tee inside the septic tank including cutting holes and duly embeded in P.C.C(1:1.5:3) using 12mm size HG chips fitted and fixed in position and mending good the damages etc all complete as per P.H specification and direction of the E.I.C. x 2 nos
116Supplying all materials, labour,T&P and providing 12mm thick cement flush pointing in C:M (1:3) to Brick Masonry works including watering curring and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.(2 x ( 3.24 + 2.24 ) m x 1.00 m = 10.96Sqm+2 x ( 3.00 + 2.00 ) m x 1.00 m = 10.00 Sqm+2 x ( 3.24 + 2.00 ) m x 0.12 m = 1.257 Sqm) x 2 nos
117Supplying all materials, labour,T&P and filling Foundation and Plinth with excavated earth including watering, ramming etc all complete as per direction of the E.I.C. 2 Nos
118Supplying all materials labour T&P and cutting holes through brick/stone masonry works including making good the damages in cm (1:4) for taking H.C.I/PVC pipes and fittings etc. all complete as per PH specification and direction of EIC.250mm thick wall
119375mm thick wall
120Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damages as per direction of the E.I.C.
121Supplying all materials labour T&P and fitting & fixing UPVC SWR soil waste ventilating pipes and fittings of the following OD conforming to ISI No.13591/1992 to walls with nails bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method as per manufacturers specification testing e. w. in excavation in all kinds of soil and refilling of trenches as per direction of EIC 110mm dia UPVC SWR Pipe with rain water piping (.Ashirvad / Supreem / Oriplast / Hariplast)110mm dia UPVC SWR Pipe
122110mm dia U-PVC S. Trap
123110mm dia U-PVC P. Trap
124110mm U-PVC S/J with Door
125110mm U-PVC door bend
126110mm dia U-PVC Plain bend
127125mm dia CP Grating
128110mm U-PVC Plain Tee
129110mm U-PVC Cowl
13075mm dia U-PVC SWR Pipe
13175mm dia U-PVC Plain Tee
13275mm U-PVC Door Bend
13375mm U-PVC Plain Bend
134Supplying all materials labour T&P and constructing gully trap chamber of the following inside size with 8cm thick RCC precast cover slab in cc (1:1.5:3) using 12mm size hg chips foundation concre3te(1:3:6) using 40mm size hg metal on bed and around trap FLY ASH Brick work in cm (1:6) in F&P and inside 12mm thick cp (1:3) finished with a floating coat of neat cement including fixing 100mm size HCI gully trap and grating etc. all complete as per approved drawing specification and dir of EIC.Inside size 250mmx250mm gully trap
135Supplying all materials, labour T&P and construction of Inspection chamber of the following sizes with c.c.(1:3:6) using 40mm size hg metal on bed, FLY ASH Brick work in cm(1:6) moulding and shaping the channel inside and benching with c.c. (1:1.5:3) with punning to inside cement flush pointing (1:3) to outside RCC cover slab in cc (1:1.5:3) using 12mm size hg chips with RCC m. h. cover, e. w. in excavation in all kinds if soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to site payment of royalty taxes etc. all complete as per approved specification and direction of EIC.Inside size : 760 x 760 x 460mm Inspection Chamber
136Supplying all materials labour T&P and construction soak way pit of the following sizes with dry brick walling from bottom upto invert of inlet pipe and FLY ASH Brick work in cm(1:6) for the remaining height at top 12mm thick cp (1:4) inside and outside over masonry brick work gravel packing the rear of well staining RCC cover slab in c.c. (1:1.5:3) using 12mm size hg chips fitted with iron lifting handles including e.w. in open well excavation in all kinds if soil and refilling the cavity around the pit and painting the iron works, watering, curing, conveyance of all materials to work site payment royalty, taxes etc. complete as per approved drawing specification and direction of EIC. 0.9m dia x 2.00m deep soak way pit
137Supplying all labour materials T&P and laying of UPVC soil waste pipe of the fo0llowing internal diameter confirming to IS in trenches of the depth upto 1.2mtr including jointing with supply of approved rubber, lubricant by non heat application method on bending with 150mm thick cc (1:3:6) using hg metal of 25mm to 40mm and then making all-round encasing including earth work excavation in all kinds of soil, refilling the trenches watering, curing, conveyance of all materials to site payment of royalty, taxes etc. & testing all complete as per PH sp and dir of EIC.110mm dia with allround encasing
138Supplying all materials, labour, T&P and providing, laying soakway gallary with SW/PVC pipes, jointing lead loose packed allround with stone boulders 50mm to 150mm other than granite, covered at top with a layer of flat tiles 300mmx300mmx25mm including earthwork in excavation of trenches in all kinds of soil to an average depth of 1.5 mtr, covering of earth at the gallary top etc. all complete as per approved drawing and direction of the E.I.C.160 mm dia PVC gallary
139Providing and fixing Chlorinated polyvinyl Chloride (CPVC) Pipes conforming to I.S 15778 having the thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1.00 mtr spacing, this includes jointing of pipes and fittings with one step solvent cement and testing of joints etc all complete as per direction of the E.I.C. Suprem/Ashirbad20 mm dia C-PVC Pipe( Internal)
14025mm dia C-PVC Pipe (Internal)
14132 mm dia C-PVC Pipe(External)
14240mm dia C-PVC Pipe (external)
143Supplying all materials labour T&P and fixing water storage sintex tanks including and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting and placing the to the required position, including cost of tank conveyance and taxes of all materials to work site etc. all complete as per PH specification and direction of EIC. 2000 lit sintex tank (G Floor)
144Supplying all materials labour T&P and construction of masonry staging with providing 1st KB brick work in cm (1:6) of 0.40mtr height in staging and in circular protection wall to support to the tank 12mm thick cement plaster in cm (1:4) over brick work RCC beam of 2.61 x 0.25x0.30 using cc (1:1.5:3) using 12mm chips including centering and shuttering curing, conveyance of all materials to work site etc. all complete as per sp and dir of EIC.2000 ltr capacity tank G Floor
145Supplying of ISI mark 1.00 HP single phase vertical submersible pump set with discharge of 900-1000 ltr/hour and a head of 50-60 mtr of reputed make like KSB/Texmo & Equivalent including all cost, conveyance and taxes etc. all complete as per direction of E.I.C.
146Supplying all labour T&P and fitting and fixing of 1.00HP single phase verticaql submersible pump set with commissioning and testing etc. all complete as per direction of EIC.
147Supplying and fitting and fixing of ISI mark DOL starter of reputed make like BCH or equivalent for 1.00HP single phase submersible pump including all cost, conveayance and taxes etc. all complete as per direction of EIC.
148Supplying and fitting and fixing of three core flat cable (1.5mm2) of ISI make of reputed company like BCH/Finolex or equivalent and connecting the pump and starter including all cost, conveyance and taxes etc. all complete as per direction of EIC.
149Supplying and fitting and fixing jof plastic rope, MS well cover, MS clamp, stainless steel short piece, bend & socket including all cost, conveyance and taxes etc. all complete as per direction of EIC.
150Supplying and fitting and fixing of HDPE pipes and pipe fittings with making connection to pump set including all cost, conveyance and taxes etc.all complete as per direction of EIC.32 mm dia HDPE Pipe(Internal Pipe)
151Sinking of T.W (125mm x 100mm dia)Labour for drilling a perfectly bore holes as specified dia for a specified defth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit the site condition as per direction of engineer incharge including use of own rig with its accessories, tools and plants and consumables etc. for lowering of 125mm dia PVC/G.I./M.S. pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (PVC/G.I./M.S) casing pipes if required to prevent collapse of over borden is to be provided by the contractor including lowering and withdrawing after completion of the tube well. a) Labour for Drilling i) 0.00 mtr to 91.00 mtr & above
152Lowering the following size of G.I./PVC housing pipe with or without slotted pipes as per necessity from ground level upto 30.00m depth and fitted and fixed up in perfectly vertical position including cutting and threading of pipes and slotted pipes and supplying and fixing all jointing materials, tools and plants complete and keeping the top of casing pipe threading including plugging tube well to prevent entry of foreign materials from above (G.I./PVC) supplied by the contractor (including cost of casing pipe.a) Lowering of 125mm dia PVC casing pipei) From 0 mtr to 30.00m and above
153b) Cost of 125mm dia PVC casing pipe (80 Sch)i) From 0 mtr to 30.00m and above
154Cleaning and developing the tube well using their own compressor continuously worked till clean and adequate discharge as obtained from the tube well including supply of and use of all necessary equipments and labour as per the direction of engineer incharge.
155Factory made FRP(alternately called GRP) door frame of size 75mmx100mm fabricated using E-glass Chopped Strand Mat (CSM) U.V stabilised Inopthalic Gelcoat and impregnated with Inopthalic resin. The finish of door frame will be plain colour white/ Ivory/ Beige/ Light grey/ Golden brown/Mahogany/ Teak wood/sand stone/Champagne/Pastel blue or any other colour using high quality pigments complete in all respect as per specification and direction of the E.I.C Door -6x ( 2.10 + 2.10 + 0.75 ) =29.70
156Factory made single leaf rigid FRP(alternately called GRP) sandwich composite door shutter of 32mm thick laminated with two GRP skins with wood grain finish fabricated using UV-stabilised Isopthalic Gelcoat and one layer of 450 gsm E-glass Chopped Strand Mat (CSM) impregnated with orthopthalic palyester resin. Wooden reinforcements made of seasoned sal wood block of cross section not less than 28mmx32mm and also necessary sal wood reinforcements for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, the sal wood reiforcements and the skins. The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre's standards and specifications and the door shutters tested in conformation to IS: 4020-1998. The finish of door shutter will be plain colour white/ Ivory/ Beige/Light grey/ Mahogany/Teak wood or any other colour using high quality pigments. Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter. Door -6 x 2.05 x 0.72 =8.856
157Supplying all materials labour T&P and fixing Ceramic tiles in floors. Treads and landing on 25mm thick bed of cement mortar (1:1) joined with neat cement slurry mixed with pigments to match the3 shades of the tiles including rub bins and dir of EIC. Ground Floor 2x7.01m x 2.74m= 38.41 sqm + 7 x 0.75m x 0.30m= 1.57 sqm (-) 1 X 0.58m X 0.44m= 0.255Sqm
158Supplying all materials labour T&P and fixing porcelain glazed tiles/Marble tiles /Kota /Kodappa tiles in walls / dados skirting on 12mm thick cp (1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles including rub bins and polishing complete as per direction of EIC. Ground Floor Wall = 2 x8.48m x 2.10m= 35.61 sqm + 5 x 5.0m x 2.10m= 52.50 sqm + 1 x 4.64m x 2.10m= 9.74sqm + 2 x 1.50m x 2.10m= 6.30 sqm + 1x 2.50m x 2.10m= 5.25
159Supplying all materials, labour, T&P and fixing water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:4:8) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrest etc all complete as per specification and direction of the E.I.C.
160Supplying all materials, labour T&P and fixing Wash Down Water Closet(Europeon type W.C. pan) with Integral S trap to the floor with wooden plug and C.P.screws including jointing the trap with soil pipe in C.M.(1:1) etc. all complete as per specification & direction of E.I.CE..W.C. with S trap plain(Neycer/ Parry ware/ Cerra) single unit
161Providing & Fixing wall Mounted Grab Bar 600 mm long including making good the damages, including cost of all materials completed as per specification and direction of the E.I.C.
162Supplying all materials labour T&P and fixing wash basins with hole for pillar taps with CI/MS brackets painted white including holes in walls and making good the damages etc .all compt. As per PH sp. And dir. Of EIC.550x400mm WHB ( Paryware/Nycer/ cerra )
163Supplying all materials, labour, T&P and fixing pedestrial for wash hand basin complete recessed at the back for the reception of pipes and fittings etc all complete as per specification and direction of the E.I.C.Porcelain Pedestal
164Supplying all materials labour T&P and fixing mirror of superior glass mounted on 6mm thick AC sheet or plywood sheet and fixed to wooden plugs with cp screws and washers compt. As per PH specification and direction of EIC.B.E Mirror
165Supplying all materials labour T&P and fixing standard size cp towel rail/ring compt. with cp brass brackets fixed to wooden plugs with cp screws as per PH specification and direction of EIC.CP Towel rail (20x600) heavy Stainless steel with Ambar make .
166CP Towel ring heavy Stainless steel with mousoumi make .
167Supplying all materials labour T&P and fixing standard size cp soap holder compt. With cp brass brackets fixed to wooden plugs with cp screws as per PH specification and direction of EIC Stainless steel with heavy good quality
168Supplying all materials, labour T&P and fitting and fixing Acraylic shelf including polishing all complete as per P.H. specification and direction of EIC. 450mmx125mm size Plate Acraylic Shelf with heavy good quality
169Supplying all materials labour T&P and fitting and fixing 10 ltr capacity low level flushing cistern with a pair of cast iron or m.s. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float, c.p. brass handle, unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia cp foush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting inlet pipe with supply main etc. all complete as per specification and direction of EIC. 10ltr Capacity Cistern ( Paryware/Nycer/ cerra )
170Supplying all materials, labour, T&P and fixing bowl pattern urinal(Hindware,Parryware,Cera) including connecting the urinal with waste pipeby means of white lead mixed with chopped hemp etc all complete as per specification and direction of the E.I.C.Half stall urinal
17115mm dia urinal Spreader
17232mm dia Dome wate
173Supplying all materials,labour, T&P and providing marble slab in urinal partition wall including cutting grooves in wall and making good the damages including watering curing etc as per specification and direction of the E.I.C 2 x 0.60m x 0.90m = 1.08 sqm
174Supplying all Materials labour T&P and fitting and fixing brass/CP Fittings ( Jaquar Make ) of the following nominal bore with supply of all jointing materials etc. complete as per PH Specification and Direction of EIC. 15mm dia cp bib cock S.B. Jaquar
17515mm dia cp bib cock L.B.
17615mm dia CP Two way bib Cock
17715mm dia CP pillar cock
17815mm dia cp angle stop cock
179Health Fuccet
18015mm dia CP flange
18115mm dia CP Extension piece
18225mm dia Brass Ball Valve
18332 mm dia Brass Ball Valve Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58602664
AUTHORITY Government Departments
TENDER VALUE 1.20 Crore
LAST DATE 04-12-2026
Authority
Authority Name Rural Works Department
Work Description Tender for Construction Of New Secondary High School At Serango Under Gumma Block In The District Of Gajapati For The Year 2025-2026.
Basic Detail
Tender No NCB-17/RWCRGDA/2026-27
Bidding Type Tender
Location
City Gajapati
State Odisha
Key Dates
Publish Date 18 Nov 2026
Submission Date 04 Dec 2026
Open Date 05 Dec 2026
Finance
Tender Value 1.20 Crore
Tender Fee 10000
EMD 1.20 Lakhs
Exemption Available
Document List
5bb3bc3b-6c26-485a-9c54-d8b31857f770.html
BOQ_622121.xls
Tendernotice_1.pdf
Tendernotice_2.pdf
Tendernotice_3.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 18, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 04, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 12 days
Dec 05, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 13 days

Tender Documents

Download All (ZIP) ↓
html

5bb3bc3b-6c26-485a-9c54-d8b31857f770.html

xls

BOQ_622121.xls

pdf

Tendernotice_1.pdf

pdf

Tendernotice_2.pdf

pdf

Tendernotice_3.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender