Public Administrative Department Government Departments Closing in 4 days TDR #58602429

Tender For Under District Barabanki, Major Repair Work Of Block Resource Centre In Fatehpur Block, Lot No 1

Issued by Government Departments · Ayodhya, Uttar Pradesh
Tender Value
10.31 Lakhs
Estimated cost
Bid Submission
24 Nov 2026
4 days left
EMD
20620
Bank guarantee accepted
Document Fee
766
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Ayodhya → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Under District Barabanki, Major Repair Work Of Block Resource Centre In Fatehpur Block, Lot No 1

BOQ

Name of Work:- Under District Barabanki, Major repair work of Block Resource Centre in Fatehpur block, Lot No 1
Sl. No. Item Description
1Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. DSR 15.56
2E/W in excavation by mechanical means (Hydraulic Excavatory)/manual means in foundation trenches or drain (Not exceeding 1.5m in width or 10 sqm on plan). I/c dressing of sides and ramming of bottoms, for all lift, i/c getting out the excavated soil and disposal of surpluse excavated soil as directed, within a lead of 50 m. DSR 2.8
3Providing and laying in position in C.C specified grade excluding the cost of centering, shuttering ,finishing and reinforcement ( 1:6:12)with cement , Fine sand and 40mm gauge B/ ballast i/c all as per pwd spacifications no 273
4Brick work with common bruint clay F.P.S. (Non Modular) Brick of class designation 7.5 in foundation and plinth in cement mortar 1:6 (1 Cement ; 6 coarse sand) DAR NO. 6.1.2)
5Brick work with common bruint clay F.P.S. (Non Modular) Brick of class designation 7.5 in supper structure above plinth up to floor v level in all shapes and sizes cement mortar 1:6 (1 Cement ; 6 coarse sand) DAR NO. 6.4.2
6Structural steel work riveted, bolted or welded in built up sections, truesses and framed work. i/c cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. DSR 10.2
7Providing and fixing 35 mm thick shutters panelled or panelled and glazed shutters for doors. Windows and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of engineer-in-charge. (Note Butt hinges and necessary screws shall be paid seprately) DSR 9.5.3.1
8Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with 4.0 mm thick glass panes. DSR 10.30.1
912mm thick cement plaster Mixe 1:4 cement C/Sand mix mortar DSR 13.4.1
10Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate. DSR 11.3.1
11Providing & applying white cement based putty of aveage thickness 1mm of approved brand and manufacturer ove the plastered wall surface to prepare the surface even and smooth complete SI No DSR 13.80
12Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. 13.48A.1 New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm. DSR 13.48A.1
13Painting with synthetic Enamel paint of approved brand and manufacture of required colour to give and even shade, Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture DSR 13.62.1
14Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to LS: 15622 of approved make in all colours and 11.41 shades, laid on of 20mm thik cement mortar 1:4 (1 cement :4 coarse sand ), jointing with grey cement slurry @3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. size of tile 600x600 mm. DSR Code 11.41.2
15Providing and laying flamed finish granite stone flooring in required design and pttterns, in linear as well as curvilinear protions of the bulidings. Fmaled finish granite stone slab Je Black, Cherry Red, Elite Brown, Cat Eye or requivalent. DSR No. 11-55.1
16Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete. (Floor Tiles) DSR 14.40
17Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (Wall Tiles) DSR 8.31
18Providing and fixing water closet squatting pan (Indian type W.C. pan of size 580×440mm with ingegral type foot rests ) with 100 mm sand cast Iron P or Strap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required Same as above but for Indian type W.C. pan DSR 17.1.1
19Providing and fixing wash basin with C.I. brackets,15 mm C.P. brass pillar taps, 32 mm C.P. brasswaste of standard pattern, including painting offittings and brackets, cutting and making good thewalls wherever require a) White Vitreous China Flatback wash basin size 550x 400 mm with single 15mm C.P. brass pillar tappillar tap. DSR 17.7.4
20Providing and fixing Stainless Steel A ISi 304 (18/8) kitchen sink as per IS: 13983 with C. brackets and stainless steel plug 40 mm, including painting of fillings and brackets, cutting and making good the walls wherever required Kitchen sink with drain board of size 51Ox1040x200mm DSR 17.10.1.1
21Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete. Flexible Pipe 32 mm dia DSR 17.28.2.1
22Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. DSR 17.31
23Providing & fixing 60x2cm. C.P. brass towelrail complete with C.P. brass brackets fixed to wooden cleats with C.P. brass screw. ESSCO AEC-1111 DSR 17.73.2
24Providing & fixing C.P. brass long body bib cockof approved quality conforming to IS standardsand weighing not less than 690 gms. DSR 18.51.1
2513 Providing and fixing Chlorinated Polyvinyl Chloride(CPVC) pipes, having thermal stability for hot & coldwater supply, including all CPVC plain & brassthreaded fittings, including fixing the pipe withclamps at 1.00 m spacing. This includes jointing ofpipes & fittings with one step CPVC solvent cementand testing of joints complete as per direction ofEngineer in Charge. 25 mm nominal outer dia Pipes DSR 18.7.3
2624 Providing and placing on terrace (at all floor levels) polyethylene water storage tank of approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for circular tank. DSR 18.48
27Point wiring in PVC conduit, with piano type switch :-Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class pvc conduit, with mdular type switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. DSR 1.10.3 (Ele 2022)
28Power plug wiring in PVC conduit (2 x 4 Sq.Mm.):Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class pvc conduit alongwith 1 No. 4 sq mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. DSR 1.12
29Circuit/ Sub main wiring in PVC conduit:-Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class pvc conduit as required.
302 X 1.5 sq. mm+ 1 X 1.5 sq. mm earth wire. DSR 1.14.1
312 X 2.5 sq. mm+ 1 X 2.5 sq. mm earth wire. DSR 1.14.2
32S/F power plug point piano type accessories:-Supplying and fixing metal box of 180 mm X 100 mm X 60 mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 A & 15/16 A socket outlet and 15/16 A piano type switch, connections, painting etc. as required. DSR 1.30
33Applying and fixing 20 amps, 240 volts, SPN, industrial type socket outlet, with 2 poles and earth metal enclosed plug top along with 20 amps. \\"C\\" curve, SP MCB in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet, and complete with connections, testing and commissioning etc. as required. DSR 2.18
34S/F modular type electronic fan regulator:-Supply and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. As required. DSR 1.25
35Supplying and fixing 5 amps. to 32 amps. rating, 240 volts 'C' series, miniature circuit breaker (MCB) suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. single pole DSR 21.2.10
36Installation, testing and commissioning of ceiling fan including wiring the down rod of standard length (upto 30 cm.) with 1.5 sq. mm. FRLS PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required. DSR 1.45
37Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0. Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374- 2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. DSR 19.1
38Supply of LED Tube Light with Metal heavy duty Box type batten Light fitting 1X22 watt suitable for upto 1X22 watt LED Polycarbonate tube light complete Including tube suitable for both surface & suspended complete in all respect. UPSOR Ch.14, 1413, CAT-AAA
39Supply of Murga Jal
40S/F Inaugration black granite (Polished) 20mm thick stone size 0.90x0.75m. including lettering, printing, border etc. will be painted of superior quality is required shade and colour including fixing excavation of foundation (1.40x0.50x0.40 m), P.C.C. 1:6:12 (1.40x0.50x0.10m), brick work 1:4 cement coarse sand foundation (1.40x0.345x 0.30m) ,upto (1.40x0.23x1.35 m),12mm thick plaster 1:4 cement coarse sand and finishing walls with water proffing white cement paint of approved make and quality such as super snowcem paint etc. all complete. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58602429
AUTHORITY Government Departments
TENDER VALUE 10.31 Lakhs
LAST DATE 24-11-2026
Authority
Authority Name Rural Engineering Department
Work Description Tender for Under District Barabanki, Major Repair Work Of Block Resource Centre In Fatehpur Block, Lot No 1
Basic Detail
Tender No 994/EE RED Barabanki/26-27 Dt 17/10/2026
Bidding Type Tender
Location
City Ayodhya
State Uttar Pradesh
Key Dates
Publish Date 19 Nov 2026
Submission Date 24 Nov 2026
Open Date 24 Nov 2026
Finance
Tender Value 10.31 Lakhs
Tender Fee 766
EMD 20620
Exemption Not Available
Document List
a2dcecb4-29a9-43f3-b111-d7ae4802ef9c.html
BOQ_2298213.xls
Tendernotice_1.pdf
Tendernotice_2.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 19, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 24, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 4 days
Nov 24, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 4 days

Tender Documents

Download All (ZIP) ↓
html

a2dcecb4-29a9-43f3-b111-d7ae4802ef9c.html

xls

BOQ_2298213.xls

pdf

Tendernotice_1.pdf

pdf

Tendernotice_2.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender