Tender For Road Safety Work On Sujansarai Gursahaiganj Road Mdr 95 C Via Chhibramau Talgram Mawaiya.
Tender Value
8.70 Lakhs
Estimated cost
Bid Submission
25 Nov 2026
6 days left
EMD
87000
Bank guarantee accepted
Document Fee
857
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kannauj → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Road Safety Work On Sujansarai Gursahaiganj Road Mdr 95 C Via Chhibramau Talgram Mawaiya.
BOQ
| Sl. No. | Item Description |
| 1 | Providing and aplying Tack coat with VG-10 using Bitumen pressure distributor at the rate of 0.30 kg per sqm on the prepared bituminous surface cleaned with mechanical broom. |
| 2 | Providing and laying dense graded bituminous macadam with higher capacity batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects. |
| 3 | Providing and laying bituminious concrete with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 % of mix and filler, transporting the hot mix to work site,laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORT&H Specifications Clause 507 complete in all respects. |
| 4 | Providing and laying of hot appiled thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC: 35-2015. The finished surface to be level, uniform and free from streaks and holes (MORTH-803,8.13) |
| 5 | Thermoplastic Transverse Bar (Repeated)P/L hot appiled thermoplastic compound 5 mm thick, 300 wide and 600 mm gape including reflectorising glass @ 500 gms per sqm area, thickness of 5 mm is exclusive of surface applied glass beads as per IRC: 35 the finished surface to be level, uniform and free from streak and holes (Transverse Bar/Repeated Bar) Edge line/centre line/Zebra Crossing/Rumble stripe |
| 6 | (STOP Sign) :-Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC 67- 2012 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting type IV 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of property designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. The Retro reflective sheeting shall be tested for 3 year outdoor weathering test in indian conditions as per IRC 67:2012 & proof of the same in form of government report shall be uploaded while quoting tender. |
| 7 | (Single chevron) :-Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC 67- 2012 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting type IV 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of property designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. The Retro reflective sheeting shall be tested for 3 year outdoor weathering test in indian conditions as per IRC 67:2012 & proof of the same in form of government report shall be uploaded while quoting tender. |
| 8 | Object Hazard :-Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC 67- 2012 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting type IV 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of property designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. The Retro reflective sheeting shall be tested for 3 year outdoor weathering test in indian conditions as per IRC 67:2012 & proof of the same in form of government report shall be uploaded while quoting tender. |
| 9 | Sign Board (90cm equilateral tringle with definition plate)Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC 67- 2012 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting type IV 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of property designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. The Retro reflective sheeting shall be tested for 3 year outdoor weathering test in indian conditions as per IRC 67:2012 & proof of the same in form of government report shall be uploaded while quoting tender. |
| 10 | TRAFFIC SIGNS - MAXIMUM SPEED LIMITProviding and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 mad of high intensity grade sheeting vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly dsignd foundation with M-15 grade cment conc. 45 cm x 45 cm x 60 cm, 60 cm below ground lvel as per approved drawing |
| 11 | Supply & fixing of Pavement Maker (Cat Eye) Type X-ASTMD-4956-04 Avery Denniol/3-M (USA made) consisting of ASA plastic housing fitted with tightly adherent plolting compound. The housing shall contain prismatic two glass covered prismatic reflective face to reflect incident light I/C all Tax. As per SI No. 11 |
| 12 | Supply and instalation of delinators (road way indicators, hazard markers, object marker) 80-100 cm. high above ground level, painted black and white in 15 cm. wide strips. fitted with 80x100 mm rectangular or 75 mm dia circular reflectorised panel at the top buried or pressed into the ground and conforming to IRC:79 and the drawing. SI. No.2 (For Culverts) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysNov 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender