Tender For Repair/Renovation Of Various Quarters By Way Of Cupboard, Tiles & Other Allied Works At Ahata Poonch House, Ahata Amar Singh, Sarwal Housing Colony, Janipur Housing Colony, Q. No 298 Jammu For 06 No Qrts.
Tender Value
4.80 Lakhs
Estimated cost
Bid Submission
26 Nov 2026
4 days left
EMD
9600
Bank guarantee accepted
Document Fee
600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jammu → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Renovation Of Various Quarters By Way Of Cupboard, Tiles & Other Allied Works At Ahata Poonch House, Ahata Amar Singh, Sarwal Housing Colony, Janipur Housing Colony, Q. No 298 Jammu For 06 No Qrts.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead. For thickness of tiles 10 mm to 25 mm |
| 2 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-in charge.1:3:6 or richer mix (i/c equivalent design mix). |
| 3 | Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead. |
| 4 | Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge. |
| 5 | 12mm Cement plaster of mix:1 : 6 ( 1 cement : 6 coarse sand) |
| 6 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 7 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. In colour such as White, Ivory, Grey, Fume Red Brown. |
| 8 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complet.Size of tile 600x600 mm. |
| 9 | Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc.15 mm dia. nominal bore.Light. |
| 10 | Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931 |
| 11 | Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 |
| 12 | Providing and fixing white vitreous china water closet squatting pan (Indian type) Orissa pattern W.C. pan of size 580x440 mm. |
| 13 | Providing and fixing white vitreous china pedestal type (European type/wash down type) water closet pan. |
| 14 | Providing and fixing P.V.C low level flushing cistern with manuallycontrolled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete:10 liter capacity -White. |
| 15 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required. 470x420mm bowl depth 178mm |
| 16 | Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings. Flat back wash basin of size 550x400 mm. |
| 17 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. |
| 18 | Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36 mm height of approved quality and colour, weighing not less than 300 gms |
| 19 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete.Flexible pipe 32 mm dia. |
| 20 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing. Rectangular shape 453x357 mm. |
| 21 | P/F of Stainless steel towel ring includinf fixtures. Complete. |
| 22 | P/F Wardrobe with wall panels in 18 mm plywood of century, greeenply or equivalent on slab sections(existing) and shutters with 18 mm plywood of century, greeenply or equivalent including hinges and 0.5 mm laminate on all front surface including 4\\" SS handles,wardrobe locks, magnetic catchers complete job.Complete job. |
| 23 | P/F Wardrobe frame with in 18 mm plywood of century, greeenply or equivalent with inner plain white laminate 0.50 mm, backing with 5 mm acp sheet/6mm plywood and shutters with 18 mm plywood including SS hinges and 0.5 mm laminate on all front surface and plain laminate on inner side including 4\\" SS handles,wardrobe locks, magnetic catchers complete job.Complete job. |
| 24 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. With ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws 35 mm. |
| 25 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : Second class deodar wood. 35 mm. |
| 26 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S pressed butt hinges bright finished of required size with necessary screws.Second class deodar wood 35 mm. |
| 27 | Renewing glass panes, with wooden fillets wherever necessary :Float glass panes of thickness 4.0 mm. |
| 28 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 29 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 1 mm. |
| 30 | Distempering with 1st quality Acrylic/oil bound washable distemper (ready-made) having VOC content less than 50 grams/litre of approved manufacturer and of required shade and colour complete as per manufacturers’ specifications, one or more coats on old work. |
| 31 | Engaging welder with welding set and consumables |
| 32 | Engagement of manpower. Labour Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysNov 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender