Housing Urban and Rular Development Government Departments Closing in 8 days TDR #58601625

Tender For Upgradation Of Existing Infrastructure (Construction Of Additional Works In Miran Sahib Training School).

Issued by Government Departments · satwari, Jammu And Kashmir
Tender Value
2.57 Lakhs
Estimated cost
Bid Submission
27 Nov 2026
8 days left
EMD
5140
Bank guarantee accepted
Document Fee
600
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
satwari → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Upgradation Of Existing Infrastructure (Construction Of Additional Works In Miran Sahib Training School).

BOQ

Name of Work:- Upgradation of Existing Infrastructure (Construction of additional works in Miran sahib Training School).
Sl. No. Item Description
1Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
2Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded
3Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws.Second class deodar wood 30 mm
4Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge Second class deodar wood
5Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work
6Repairs to plaster of thickness 12mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 meters lead With cement mortar 1:4 (1 cement : 4 fine sand)
7Finishing walls with Acrylic smooth exterior paint of required shade: Old work (two or more coats applied @ 1.67 liters/10sqm on existing cement paint surface) Old work (one or more coats applied @ 0.90 liters/ 10sqm)
8Distempering with 1st quality Acrylic/oil bound washable distemper (ready-made) having VOC content less than 50 grams/litre of approved manufacturer and of required shade and colour complete as per manufacturers’ specifications, one or more coats on old work
9Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. 15 mm nominal outer dia
10Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. 20mm nominal outer dia pipes.
11Labour engaged for various minor works Emergent nature required at site Labourer
12Labour engaged for various minor works Emergent nature required at site Plumber
13Labour engaged for various minor works Emergent nature required at site Carpenter
14Labour engaged for various minor works Emergent nature required at site Welder
15Hiring Charges of Welding Set including Welding rod Complete.
16Providing and fixing PTMT grating of approved quality and colour. Circular type . 100 mm nominal dia.
17Providing and fixing P.V.C low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete: 10 liter capacity -White
18Providing and fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0mm thick glass panes
19Supplying and fixing of ceiling fan 1200 mm Sweep of approved brands complete
20Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. (i) Single socketed pipes 110 mm diametre
21Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 150 x 10 mm
22Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.100 mm
23Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet.100 mm diameter
24Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid.
25Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931
26Providing and fixing 15 mm nominal bore C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms
27Providing and fixing fly proof wire gauze to windows, clerestory windows and doors with M.S Flat 15x3 mm and nuts and bolts complete. Galvanized M.S wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides
28Providing and fixing electric points complete in all respects as per necessity at site including laying of PVC conduit pipes, junction box, module,MCB and laying of electric wires of a approved make and thickness and fixing of switches, installation and testing complete job.
29Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete: Flexible pipe 32 mm dia
30Providing and fixing uplasticized PVC connection pipe with brass unions 45 cm length 15 mm nominal bore
31Proviiding and fixing Gyser 25 L including all fittings and fixtures complete Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58601625
AUTHORITY Government Departments
TENDER VALUE 2.57 Lakhs
LAST DATE 27-11-2026
Authority
Authority Name Public Works Department
Work Description Tender for Upgradation Of Existing Infrastructure (Construction Of Additional Works In Miran Sahib Training School).
Basic Detail
Tender No Short e-NIT No. 101 of 2026-27 Dated 18-11-2026
Bidding Type Tender
Location
City satwari
State Jammu And Kashmir
Key Dates
Publish Date 18 Nov 2026
Submission Date 27 Nov 2026
Open Date 28 Nov 2026
Finance
Tender Value 2.57 Lakhs
Tender Fee 600
EMD 5140
Exemption Not Available
Document List
1cbc96cd-d92f-4dad-80da-f3eb5c33564c.html
BOQ_1125813.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 18, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 27, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 8 days
Nov 28, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 9 days

Tender Documents

Download All (ZIP) ↓
html

1cbc96cd-d92f-4dad-80da-f3eb5c33564c.html

xls

BOQ_1125813.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender