Tender For Annual Plan-Kottayam Municipality( Tznl Zonal ) Ward 39 Project No 631/2027-Re Tarring Of Puthuvakkal - Kollam Parampu Road, Chempodi - Chempalathara Road And Interlocking Of Mani Parampu Road In Ward No 39 -General Civil Work-2026-27
Tender Overview
Project Description
Tender for Annual Plan-Kottayam Municipality( Tznl Zonal ) Ward 39 Project No 631/2027-Re Tarring Of Puthuvakkal - Kollam Parampu Road, Chempodi - Chempalathara Road And Interlocking Of Mani Parampu Road In Ward No 39 -General Civil Work-2026-27
BOQ
| Sl. No. | Item Description |
| 1 | ROAD TARRING |
| 2 | 75.5.5.B.2pb:Modified Penetration Macadam 75 mm thick using Bitumen S-65 - Packed Bitumen Rates Construction of penetration macadam over prepared base by providing a layer of compacted crushed coarse aggregate using chips spreader with alternate applications of bituminous binder and key aggregates and rolling with a three wheel 80-100 kN static roller to achieve the desired degree of compaction as per Technical Specification Clause 506. |
| 3 | 3.2:Preparation of Foundation for Embankment Scarifying Existing Bituminous Surface to a Depth of 150 mm by Mechanical Means Scarifying the existing bituminous road surface to a depth of 150 mm and disposal of scarified material with a lift upto 3 m and lead upto 1000 m as per Technical Specification Clause 301.4. |
| 4 | OD92393/2026-2027:Construction of embankment with approved material obtained from borrow pitsConstruction of embankment with Material obtained from borrow pits with a lift up to 1.5m,transporting to site, spreading, grading to required slope and compacting to meet requirement ofTables 300.1 and 300.2 with a lead up to 1000m as per Technical specification clause 301.5 |
| 5 | OD89503/2026-2027:Filling with quarry muckFilling up low laying and water logged etc., complete for improving the CBR value of subgradeareas with local material/quarry muck, spreading in layers, levelling the top at site andconsolidation by ramming |
| 6 | 4.9:Wet Mix Macadam Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400.11 & 400.12 and Technical Specification Clause 406. By Mechanical Means with 1 km lead |
| 7 | 75.5.1.1pb:Prime Coat - Low porosity - With Packed Bitumen Rates Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per Technical Specification Clause 502 |
| 8 | 75.5.2.3pb:Tack Coat - With Packed Bitumen Rates Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per Technical Specification Clause 503. |
| 9 | 75.5.2.1pb:Tack Coat - With Packed Bitumen Rates Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.20 to 0.25 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503. |
| 10 | 75.5.11.1.A.2pb:Mix Seal Surfacing - Manual Means - Type A - Bitumen S-65 - Packed Bitumen Rates Providing, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 11.2 mm to 0.9 mm (Type-A) or 13.2 mm to 0.9 mm (Type-B) aggregates using penetration grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 8-10 kN static roller and finishing to required level and grades as per Technical Specification Clause 509 By Manual Means Type A (II) Bitumen (S-65) |
| 11 | OD92486/2026-2027:Engaging labour |
| 12 | OD92485/2026-2027:Interlocking Concrete Block Pavement Providing and laying of Interlocking Concrete Block Pavements having thickness 80mm as per drawing and Technical Specification Clause 1504 |
| 13 | OD92487/2026-2027:Providing and laying factory made chamfered edge cement concrete paver blocks using Departmental materials |
| 14 | OD92488/2026-2027:Dry Rubble Masonry with hard stone, including through/ bond stone in foundation andsuper structure including packing to compactness to lines and levels, cost and conveyance of allmaterials labour charge etc. complete as per approved drawing and relevant technicalspecification |
| 15 | OD92570/2026-2027:Granular Sub-base with Well Graded Material (Table 400.1)<br>(A) By Mix in Place Method <br> Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401. (ii) For Grading II Material |
| 16 | 75.8.1.1.A:Providing Plain cement concrete for wearing coat CC 1:2:4 (1 cement: 2 fine aggregate:4 course aggregate) laid to required slope as required including compaction, finishingand tamping etc .complete. Max. size of course aggregate not exceeding 25mm , mixedin concrete mixer etc complete as per specification(i) Nominal mix (1:2:4) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender