Communications and Information Technology Government Departments Closing in 7 days TDR #58593477

Tender For Shifting & Erection Of 3 X 6.00 M Galvanized Ms Poles With All Supports And Including Foundation, H/V Gantry On Terrace Of G+1 Floors, Dnec Building, Rci, Balapur Under Phase-Ix.2, Hyderabad, Under Ph-Ix.2, In Hyderabad Ba.

Issued by Government Departments · Ranga Reddy, Telangana
Tender Value
3.52 Lakhs
Estimated cost
Bid Submission
26 Nov 2026
7 days left
EMD
7100
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Ranga Reddy → Telangana
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Shifting & Erection Of 3 X 6.00 M Galvanized Ms Poles With All Supports And Including Foundation, H/V Gantry On Terrace Of G+1 Floors, Dnec Building, Rci, Balapur Under Phase-Ix.2, Hyderabad, Under Ph-Ix.2, In Hyderabad Ba.

BOQ

Name of Work:- Shifting & erection of 3 x 6.00 M Galvanized MS poles with all supports and including foundation, H/V gantry on terrace of G+1 floors, DNEC building, RCI, Balapur under Phase-IX.2, Hyderabad, under Ph-IX.2, in Hyderabad BA.
Sl. No. Item Description
1Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc., up to floor five level, excluding the cost of centering, shuttering and finishing : 1:1½:3 (1 cement : 1½ coarse sand(zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources).
2Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer’s specification.
3Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
4Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III)derived from natural sources : 3 graded stone aggregate 20 mm nominal sizederived from natural sources).
5Centering and shuttering including strutting, propping etc. and removal of form for all heights:
6Foundations, footings, bases of columns, etc. for mass concrete
7Lintels, beams, plinth beams, girders, bressumers and cantilevers
8Columns, Pillars, Piers, Abutments, Posts and Struts
9Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo-Mechanically Treated bars of grade Fe-500 D or more.
10Smooth finishing of the exposed surface of R.C.C. work with 6 mm thick cement mortar 1:3 (1 Cement : 3 fine sand)
11Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 3.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand).
12Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry.ird course of half brick masonry.
13Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : 300x16 mm.
14Providing and fixing aluminium handles ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 125 mm.
15Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Twin rubber stopper.
16Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate.
1712 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand)
1815 mm cement plaster on the rough side of single or half brick wall of mix : 1:6 (1 cement: 6 fine sand).
19Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position all complete.
20Providing and fixing bolts including nuts and washers complete.
21Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm).
22Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work.
23Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed in position with M.S hold fast/ lugs/ SS dash fasteners of required dia
24and length complete as per direction of Engineer-In- Charge. (M.S hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/ window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. Frame size 50 x 100 mm
25Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge.
2630 mm thick. (Rate inclusive of all).
27Extra for galvanising (of thickness not less than 120 microns) on M.S angles , flats, gussets plates, bolts, nuts and other fastners.
28Providing and fixing anchor fastners (expansion fastners) of approved quality including drilling holes in RCC and fixing complete
29a) 16 mm dia and 100mm lenth
30b) 12 mm dia and 100mmm length
31Providing and supplying heavy duty injection adhesive for fixing threaded bolts in wet/dry conditions HILTI RE500 for dia upto 40mm of HILTI India Pvt. Ltd. The system to be made of two foils consisting of resin and hardener foil pack. The system can be used for fixing threaded bolts viz HAS-E-M8 to 39 rods. The cost inclusive of material, epoxy fasteners, drilling holes in concrete etc., complete as directed by Engineer-In Charge.16mm dia epoxy based anchor fasteners
32Drilling holes of 16mm dia in RCC slab/beam upto a depth 120 mm and embedding 12mm dia TMT bars of grade Fe 500D in the hole including grouting the hole with FOSROCK LOKFIX chemical or approved equivalent to anchor reinforcement excluding the cost of reinforcement as per direction of Engineer-in-Charge. ( the work shall be carried out as per manufactures specification through the Applicator approved by the manufacturer)
33Transportation of Galvanised MS 6.00 M poles including supported angles etc from BSNL T.E building premises within the city limits of upto 25km distance to work site. Rate includes lifting, loading, transportation and unloading at work site and as directed by Engineer-In Charge.
34Providing and fixing of alumninium ventilators of approximate size 5.00 M x 0.30 metre made of powder coated aluminium sections of size 50 mm x 40 mm x 2 mm. The ventilators shall be fixed with required screws, nails, nut/bolts etc to the existing opening in the bathrooms. The ventilators shall be made in panels wherein each panel shall be not more than 0.20 Sqm. In 1 (one) panel provision shall be made for fixing of exhaust fan and all the other panels shall be provided with louvers for fixing 4 mm thick pin head glass. Necessary clips arrangement in the louvers shall be made for fixing of the glass. Mosquito proof mesh shall be fixed to all the panels from outside with necessary aluminum sections (aluminum powder coated flat of approximate size 40 mm x 1 mm of required length for fixing the wire mesh). The rate includes cost of all materials, labour charges, transportation, scaffolding etc. All complete and as per directions of the Engineer - in -charge. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58593477
AUTHORITY Government Departments
TENDER VALUE 3.52 Lakhs
LAST DATE 26-11-2026
Authority
Authority Name Bharat Sanchar Nigam Limited
Work Description Tender for Shifting & Erection Of 3 X 6.00 M Galvanized Ms Poles With All Supports And Including Foundation, H/V Gantry On Terrace Of G+1 Floors, Dnec Building, Rci, Balapur Under Phase-Ix.2, Hyderabad, Under Ph-Ix.2, In Hyderabad Ba.
Basic Detail
Tender No NIT No. 84/NIT/CECTSCZ/HYD/2026
Bidding Type Tender
Location
City Ranga Reddy
State Telangana
Key Dates
Publish Date 18 Nov 2026
Submission Date 26 Nov 2026
Open Date 28 Nov 2026
Finance
Tender Value 3.52 Lakhs
Tender Fee 590
EMD 7100
Exemption Not Available
Document List
9656cefd-8434-4902-8df6-da8d491ca623.html
BOQ_347422.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 18, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 26, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 7 days
Nov 28, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 9 days

Tender Documents

Download All (ZIP) ↓
html

9656cefd-8434-4902-8df6-da8d491ca623.html

xls

BOQ_347422.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender