Tender For Provision Of 02 X Hay Stacking Store At Rts And Hempur Under Ge (East) Bareilly
Tender Value
42.93 Lakhs
Estimated cost
Bid Submission
09 Dec 2026
21 days left
EMD
85860
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Udam Singh Nagar → Uttarakhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of 02 X Hay Stacking Store At Rts And Hempur Under Ge (East) Bareilly
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: COMMANDER WORKS ENGINEER BAREILLY Name of Work: PROVISION OF 02 X HAY STACKING STORE AT RTS AND HEMPUR UNDER GE (EAST) BAREILLY Contract No : CWE / BLY / GE(E) /141 OF 2026-27 Bidder Name : SCHEDULE A(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | Excavating in trenches not exc 1.5m wide and not exc 1.5m in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes etc not exc 10 Sqm on plan and not exc 1.5m in depth and getting out is soft/ loose soil complete all as specified and directed. |
| 3 | Surface excavation not exc 30 cm deep and averaging 15 cm deep and getting out in soft/ loose soil complete all as specified and directed. |
| 4 | Removing excavated material exc. 250 m but n exc. 500 m and depositing where directed complete all as specified and directed. |
| 5 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. in soft/loose soil complete all as specified and directed. |
| 6 | M&L for PCC 1:4:8 type D2 (40mm graded stone aggregate) in foundation filling and mass concrete complete all as specified and directed. |
| 7 | M&L for PCC 1:5:10 type E2 (40mm graded stone aggregate) in foundation filling and mass concrete complete all as specified and directed. |
| 8 | Formwork for Rough finished surfaces of concrete, to sides of concrete foundations, footings, bases of columns, raft and raft beams,sides and soffits (if any) of foundation and plinth beams;and similar work; vertical or to batter complete all as specified and directed. |
| 9 | Formwork for Rough finished surfaces of concrete, to sides and soffits of floor or roof beams, beam haunchings,girders, bressummers,lintels, cantilevers, shelves including supports,overhangs,etc. also splays between floors and beams, etc. complete all as specified and directed. |
| 10 | Formwork for Rough finished surfaces of concrete, to sides of pillars,posts, struts, piers, columns and stanchions complete all as specified and directed. |
| 11 | M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 12 | All as per Item No 10 but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed. |
| 13 | M&L for reinforced cement concrete design mix M-30 (using 20 mm graded stone aggregates) in foundations, footing, plinth beams, bases for columns and mass concrete complete all as specified and directed. |
| 14 | M&L for reinforced cement concrete design mix M-30 (using 20 mm graded stone aggregates) in lintels over 1.5m clear span, Roof beams and cantilevers complete all as specified and directed. |
| 15 | M&L for reinforced cement concrete design mix M-30 (using 20 mm graded stone aggregates) in columns, pillars, posts & struts complete all as specified and directed. |
| 16 | M&L for brick work with subclass ‘B’ old size bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed. |
| 17 | M&L for rendering 10 mm thick in cement and sand mortar 1:6 on fair faces of brick work or cement concrete surfaces finishing the surface even and smooth without using extra cement complete all as specified and directed. |
| 18 | M&L for rendering 15mm thick in CM (1:4) mixed with water proofing coumpound @ 3% by the weight of cement on brick work or concrete surfaces finished even & fair complete all as specified and directed.Note:- Water proofing coumpound will be measured saperately. |
| 19 | Supply only Integral waterproofing compound complete all as specified and directed. |
| 20 | M&L for preparation of newly plastered surfaces of wall, pilasters, comices etc and applying two coat of water based exterior emulsion over and including a coat of primer over a coat of putty complete all as specified and directed. |
| 21 | M&L for hardcore of broken stones gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface including removal of existing loose soil complete all as specified and directed. |
| 22 | M&L for Moorum/ red bajri filling in floor or pavings, laid in thick, ayers n.exc 15cm thick, spread levelled and rammed including watering complete all as specified and directed |
| 23 | M&L for 100 mm thick PCC 1:4:8 type D2 (using 40 mm stone graded aggregate) as in sub base complete all as specified and directed. |
| 24 | M&L for PCC mix type (1:1½:3) using 20mm graded stone aggregate) as in flooring complete all specified incorporating an approval mentallic floor hardener 4% by weight of cement even and fair laid in panels finished with spike rolling to surface or making expended metal whilst the concrete is green (except metallic hardner) complete all as specified and directed. (Note: Metallic floor hardner will be measured & paid separataly) |
| 25 | Supply only metallic floor hardner complete all as specified and directed. |
| 26 | M&L for forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade 'A'. Thickness of concrete slab 100mm complete all as specified and directed. |
| 27 | S&F roof trusses (Framed), trussed, purlins, crane gantries, rails and fastening and heavy brackets framing(Beam, tee, angle, channel or flat section) including distance pieces, cleats, etc. Gde Fe 410-W (Gde-E-250) quality-A complete all as specified and directed. |
| 28 | M&L for mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted bolted or welded attachment complete all as specified and directed. |
| 29 | S&F pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws complete all as specified and directed. |
| 30 | S&F pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed. |
| 31 | M&L for preparation of new steel surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. Total in Figures 0.0 23 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 18, 2026
11:30 IST
Tender Published
Tender notice published.
TodayDec 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 21 daysDec 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 28 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender