Defence Statutory Bodies & Commissions/Committees Closing in 28 days TDR #58593303

Tender For special Repair To Bldg No P-16 Office Complex Of 299 Fd Regt At Dipatoli Pocket Of Ranchi Mil Stn Under Ge Dipatoli

Issued by Statutory Bodies & Commissions/Committees · Ranchi, Jharkhand
Tender Value
76.57 Lakhs
Estimated cost
Bid Submission
16 Dec 2026
28 days left
EMD
1.40 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Ranchi → Jharkhand
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for special Repair To Bldg No P-16 Office Complex Of 299 Fd Regt At Dipatoli Pocket Of Ranchi Mil Stn Under Ge Dipatoli

BOQ

Name of Work:- SPL REPAIR TO BLDG NO P-16 OFFICE COMPLEX OF 299 FD REGT AT DIPATOLI POCKET OF RANCHI MIL STN UNDER GE DIPATOLI
Sl. No. Item Description
1Taking down cement or lime plaster any description on brick or stone walls etc including recking out joints hacking for key scrubbing down with waters complete all as specified and directed.
2M&L for rendering 15mm thick in cement mortar 1:6 on faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.
3M&L for rendering 15mm thick in cement mortar 1:4 on fair faces of brick masonry or concrete surfaces of walls, chajja, fins facia etc upto 2 storie height mixed with water proofing compound (ISI marked) @ 2% by weight of cement or as per manufacturer’s instructions, finished even & smooth without using extra cement complete all as specified and directed. Note 1: - Supply only water proofing compound shall be measured and paid for separately. 2. Cost of scafolding for rendering is incuded in this item. 2: Rendering will be done in two layer. 1st layer will be 10-12 mm thick and 2nd layer will be 3-5 mm thick.
4M&L rendering 5mm thick 1:3 CM on fair face of concrete surface on ceiling finished even and smooth without using extra cement complete all as specified and directed.
5Supply only liquid water proofing compound complete all as specified and directed.
6M&L for preparation of new plaster surfaces of wall and applying two coats of distemper oil emultion over a coat of primer with roller complete all as specified as directed.
7M&L for providing and applyng minimum 1 mm thick wall care putty over prepared surface to achive the surface even and smooth for painting complete all as specified as directed.
8M&L for preparation of newly plastered of surface and three coat of white wash on ceiling surface incl complete all as specified as directed.
9M&L for old preparation of surface and two coat of white wash on old ceiling surface incl complete all as specified as directed.
10M&L washing, rubbing down and stopping of old decorated distempered and painted surfaces of walls including cornices etc and applying two coat of oil bound distemper white or tinted with roller complete all as specified as directed.
11M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified as directed.
12M&L for complete removal of existing treatment and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over a coat of putty over old surfaces complete all as specified as directed.
13M&L for Preparation of old decoreted surfaces of wall and applying two coat of cement base paint complete all as specified as directed.
14Demolition of cement concrete (unreinforced) in ground floor and pavings n exc 15cm thickness (below or above ground level) complete all as specified as directed.
15M&L for 75mm thick PCC type C-2, (1:3:6) using 40mm graded stone aggregate in hard standing , plinth protection etc finished the surface even & smooth without using extra cement complete all as specified as directed.
16M&L for coloured chequered cement concrete tiles glossy type 200x200x25 mm/ 300 mmx300mmx20 to 25 mm thick set, jointed and pointed in neat cement slurry in floors with grey cement and pigment over and including 20 mm thick cement screed bed in CM (1:6) complete all as specified and directed.
17M&L for PCC 1:2:4 type B1 (Using 20 mm graded aggr) as in coping and similar works incl necessary from work complete all as specified and directed.
18M&L for PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) in surface chanel and drain complete all as specified and directed.
19Demolition of brickwork built in cement mortar or cement lime mortar complete all as specified and directed.
20M&L for brick work with fly ash brick old size bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:4 complete all as specified and directed.
21Taking up or down steel tubing and connections 15mm bore complete all as specified and directed.
22S&F for steel water tubing `medium grade’ galvanized 15 mm bore with all fittings and fixed complete to walls and ceiling concealed and joints fixed with adhesive complete all as specified and directed.
23Taking up or down steel tubing and connections 20mm bore complete all as specified and directed.
24S&F for steel water tubing `medium grade’ galvanized 20 mm bore with all fittings and fixed complete to walls and ceiling concealed and joints fixed with adhesive complete all as specified and directed.
25Dismantling water tanks exc 500 Ltr but n exc 1000 Ltr and removing to store complete all as specified and directed.
26S&F rotantional moulded polythylene water storage tanks 1000 ltr capacity (cylindrical vertical with closed top ) hoisted and fixed in position complete all as specified and directed.
27S&F in repairs 20mm bore ball valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball screwed for iron pipe & fixed. (Minimum weight15mm-142gms/ 20mm-210gms/ 25mm-455gms/ 40mm-690gms) complete all as specified and directed.
28S&F in repair 20 mm dia gun - metal globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.
29S&F in repaire Premium one piece ceramic western floor mounted one piece water closet western commode with soft closed seat cover for Lavatory in built flushing cistern, toilet including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe etc incl P or S trap complete all as specified and directed.
30S& Fin repair Vitreous china premium/ 1st quality wash down water closet EWC white/ ivory/ off white (closed pattern incl all necessary accessories like rag bolts/ gel gasket etc. (excluding flushing cistern & flush pipe) complete all as specified and directed.
31S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.
32S&F in repairs 10 Litre capacity PVC low level flushing cistern with ball valve and handle/push button 32mm dia PVC flush pipe including taking down unserviceable cistern complete all as specified and directed.
33S&F in repair vitreous china wash basin white flat back size 550x400mm excluding taps ,including waste cupling,waste pipe, complete all as specified and directed.
34S&F in repairs for 15 mm bore pillar taps CP fancy type screwed down high pressure with long shanks and fly nuts screwed for iron pipe Hot or Cold with long screwed and fixed complete all specified and directed.
35S&F in repair Two way Angle valve 15 mm bore complete all as specified and directed
36S&F in repair brass chromium plated angle stop cock, of 15 mm bore complete all as specified and directed.
37S&Fin repair CP long body bib taps fancy type CP alloy with crutch or butterfly handle screwed for iron pipe or for brass ferrule, of fixed 15mm dia complete all as specified and directed.
38S&F in repairs Grating doom 100 mm dia with waste hole complete all as specified and directed.
39S&F in repair mirror of selected quality glass 450x600mm, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed.
40S&F in repairs push button soap dispensers complete all as specified and directed.
41S & F Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed.
42S & F in repair for towel ring of PTMT fixed with and including chromium plated brass screws (min weight 90gms) complete all as specified and directed.
43S & F for waste pipe for WHB / urinal, 32/40 mm dia complete all as specified and directed.
44S&F in repair 15mm bore stop valve (concealed type), cast copper alloy fancy type chromium plated screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed of size complete all as specified and directed.
45S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.
46S&F in repairs PVC connections 450mm long, 15 mm size with brass chromium plated nuts at ends complete fixed in repair complete all as specified and directed.
47S& F in repair Soap dish, any type, fixed toplugs with chromium plated brass screws complete all as specified and directed.
48S&F for PVC (SWR) gully trap 125/110 mm,setting and jointing with solventcement complete all as specified and directed.
49M&L for 75mm dia PVC (SWR) floor trap, plane with grating including jointing with solvent cement complete all as specified and directed.
50Taking down eaves gutters and rainwater pipes PVC/CI (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed.
51S&F for 110mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.
52S&F for 110mm PVC (SWR) bends any radius complete all as specified and directed.
53S&F for PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.
54S&F for 75mm PVC (SWR) bends anyradius complete all as specified and directed.
55Dismantling/ Demolition/ striping out of existing roof treatment (terfelt and roof plaster etc) including PCC padding of any discription and any thikness including backing and removal the debris complite all as specified and directed.
56M&L for 40 mm thick PCC roof padding 1:2:4 type B-0, 12.5 mm graded stone aggregate in floors, finished smooth complete as specified and directed.
57M&L for 10 mm thick screed bed or bedding layer of mortar in CM 1:3, using Liquid Water Proofing Compound as per manufacturer's instruction, laid in roof finisshed even and smoooth without using extra cement (WPC shall be paid separately) complete as specified and directed.
58M&L for water proofing treatment to flat roofs and edges (vertical or tapered) etc. in following sequence:- (i) Properly cleaning and drying the surface(ii) Applying a coat of bitumen primer @ 0.25 Kg/Sqm (iii) Applying a coat of hot air blown grade bitumen 85/25 @ 1.2 Kg/Sqm (iv) Laying 3mm thick APP modified water proofing membrane with 100mm overlaps, sealed and bonded to the surface by 'torchon' method as per manufacturer's instructions complete all as specified and directed.
59M&L for applying of bituminous aluminium paint over water proofing membrane @0.15 ltr/sqm as per manufacturer instructuions complete all as specified and directed.
60M&L for PCC in roof kerbs of mud stops, rounded or chamfered on edges and base of Over head tank type B1 (1:2:4) using 20 mm graded aggregate complete all as specified and directed.
61M&L for demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as specified and directed.
62M&L for machine cut kota stone slab flooring 20-25mm thick over 20mm thick (1:6) cement screed bad laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.
63All as per item No 62 above but as in riser of steps, skirting, dado and pillar laid over 15mm tick cement plaster in CM 1:4 complete all as specified and directed..
64S&F for 20 mm Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, win dow-cills, cooking plat forms and like 20 mm cement mortar (1:4) including point ing in white cement (1:2) us ing marble dust with admix ture of pigment to match with shade of granite complete all as specified and directed.
65M&L for Rounding to edges of stone slabs one edge, such as in steps,cooking platform, and other similar situations complete all as specified and directed.
66Demolition of cement concrete in RCC ( reinforcement cut as required to facilitate demolition) complete all as specified and directed.
67M&L for Precast RCC 1: 2:4 type B1 (nominal mix ) using 20mm graded stone aggregates as in drain/MH cover slab etc complete all as specifide and directed.
68Mild steel TMT bars 6 mm to 8 mm dia., cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips quality confirming to Fe-410-S 0r Fe-410-O complete all as specifide and directed.
69Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specifide and directed.
70S&F for Non - skid coloured Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15 mm thick screed bed in cm 1:6 etc complete all as specifide and directed.
71All as per item No 70 above but as in skirting over 10 mm thick cement morter in 1:4 complete all as specifide and directed.
72S&F joint free non skid coloured ceramic tiles 7 to 8mm thick(square / rectangular ) area of each tile n.exceeding 0.11 sqm , in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15 mm thick screed bed in cm 1:6 etc complete all as specified and directed.
73S&F Glazed ceramic coloured tiles 450x350x7mm thick in vertical surface etc set and jointed in neat cement slurry and pointed in coloured cement to match tiles over 10mm thick rcement plaster in cm 1:4 complete all as specified and directed.
74Taking down chowkats or frame not exc 1.5 sqm with shutter (with out taking of shutter from frame) complete all as specified and remooving from site.
75All as per item No 74 above but exe 1.5sqm and n.exe 4 sqm complete all as specified and directed.
76S & F for Pressed steel frames for doors of size 105 x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete all as specified and directed.
77M&L for PCC 1:3:6 type C1 as in hold fast blocksand filling in pressed steel frame and fasning of hold fast incl. Necessary form work complete all as specified and directed.
78M&L for 35mm thick factory made flush door shutters solid core construction with block board core and ply wood face panels commercial type on both faces complete all as specified and directed.
79S&F for Solid PVC Door Frame shall be of the size 50 X 47 mm made out of 5mm PVC sheet. The door profile are to be reinforced with 19 X 19mm MS Square tube. EPDM rubber gasket weather seal shall be provided through out the frame. The profile shall be mitre cut at two corners and joined by inserting 2 nos of 150mm long brackets of 15 X 15mm MS square tube inside the 19mm X 19mm MS square tube and suitably screwed shall be complete as per SSR Part I clause 8.34.3 all as specified and directed.
80S&F for factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site complete all as specified and directed.
81Providing and fixing factory made uPVC white color Sliding window Two track made of extruded profiles with wall thickness of 2.3mm (+- 0.2mm). Window profile with hollow section with multi chamber, Frame (60mm x 62mm). sash (42mm x 67mm). Sliding Interlock (One vertical length in each shutters) (45.5mm x 28mm). Glazing bead (24.5mmx 16mm) will he mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc.. making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel frame (30mm x 21.5mm), Sash (30mm x 18mm), profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners. Hardware : [Touch Lock of zinc alloyed (white powder coated), steel roller system including 5mm thick glazing with selected quality glass, aluminum track on bottom rail for two track sliding frame, wool pine for Sliding sash and interlock.](Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose)
82Providing and fixing factory made uPVC white colour casement (Openable) window made of extruded profiles with wall thickness of 2.3mm ( + – 0.2mm). Window profile with hollow section with multi chamber, frame (60mm x 58mm), sash (60mm x 73mm), T profile (One vertical length in between two shutters) (60mm x 74mm), Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of ardware. EPDM gasket 1.2 +– 0.2mm thick, galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27.5mm). T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100mm long fasteners. Hardware: [casement handle made of zinc alloyed (white powder coated), But Hinges of'zinc alloyed (white powder coated), transmission gear made of mild steel with multi point locking system] and 5mm thick glazing with selected quality glass. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.) Area upto 1 Sqm
83S&F for 4.8 mm thick sheet glass, ordinary quality & glazing with oil putty/wooden beading/rubber packing around the glass in square n. exc 0.5 sq.m in each pane including hacking out old glass of any description complete all as specified and directed.
84M&L for powder coated anodised aluminium doors (sliding/hanging type) with frame size 101.6 X 44.75 X 2.4mm thick and shutter aluminium anodised and Lock Rail 44.45X 47.62 X 2.02mm, style 44.45X 47.62 X 1.95 mm, Top Rail 101.60X 44.45 X 1.93mm, Intermediate rail 101.50X 44.45 X 2.01 mm and bottom rail 101.60X 44.50 X 2.5 mm incl necessary aluminium fittings like aluminium butt hinges 04 Nos, aluminum handles 150 mm 02 nos, Aluminium tower bolts 200mm 01 Nos, mortice lock 4 lever MS, , jointing cleats, glazing cleats, rubber packing, anodised aluminium snap beading, screws etc with panelling in two parts with 5 mm thick ACP Sheet/5.5mm frosted glass incl all fittings & fixture complete all as specified and directed.
85S&F in repair curtain rod/rail with drapery madeout of stainless steel curtain rod of 20/25 mm dia including bracket and with two glob with necessary fitting etc measured end to end of globe as requirement at site complete all as specified and directed.
86Dismantling wrought iron or mild steel work of any description not otherwise provided forwindows grill etc complete all as specified and directed.
87S&F for framed work such as grills, gratings etc, with ends of bars shouldered and / or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusteres, walk ways, railings, frame work of water tanks and similar work complete all as specified and directed.
88M&L preparation of new wooden surface any description not otherwise described and exc 10cm width or girth applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
89M/L preparing new steel surfaces of any description over 10cm width or girth and applying two coat of synthetic enamel paint over a coat off red oxide primer complete all as specified and directed.
90M&L for preparation of old steel surfaces exc 10cm width or girth and applying one coat of aluminium paint over one coat of aluminium red oxide primer complete all as specified and directed.
91S&F for 75 mm size butt hinges medium weight cold rolled milled steel complete all as specified and directed.
92S&F for 100mm size butt hinges medium weight cold rolled milled steel complete all as specified and directed.
93S&F for 200mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.
94All as per item No 93 above but 150mm long complete all as specified and directed.
95S&F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.
96M&L for 150 mm size Aluminium handle cast type anodiesd complete all as specified and directed.
97Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.
98M&L for 8mm thick designer ceiling board (Make : Everest or equivalent as approved by GE) in ceiling fixed with screw as per manufactures instructions, fixed with white powder coated galvanized iron grid with 24mm wide T-section exposed flanges comprising of main runner made from 0.33mm thick galvanized steel sheet & of size T 24x32mm and spaced at 1.2m c/c securely fixed to the structural soffits by hangers at 1.2m of GI wire 4mm dia fixed pipe or wall plug, level adjusters and screws etc. The last hanger at the end of each main runner shall not be greater than 450mm from adjacent wall flush fitting of 1200mm long cross tee with (double stitching) to be inter locked between main runners at 600mm c/c to form 600x600mm modules, angle along perimeter wall shall be of 0.45mm thick galvanized steel of size 19x19mm of white colour all as per instruction complete all as specified and directed.
99Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.
100S & F for Pre-painted aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
101Taking down carefully copper/ aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets etc.removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc. complete all as specified and directed.
102Taking down carefully copper/ aluminium sub main wiring of size 2.5/4/6 sqmm from surface/concealed at any height and removing the materials from site and making good the disturbed surfaces of walls,floors roofs etc complete all as specified and directed.
103Taking down old/ unserviceable MCB/ MCCB DB any capacity by disconnection of electric connection including MCCBs, MCBs, Isolators, etc and making good to disturbed surface complete all as specified and directed.
104Taking down Old ceiling fan by disconnection of electric connection and deposit to MES store yard of AGE E/M Dipatoli and refixing the same after servicing, capacitor replacement & synthetic enamel spray paint of roter & blade complete all as specified and directed.
105Taking down Old/ Unsv exhaust fan by disconnection of electric connection and deposit to MES store yard of AGE E/M Dipatoli and refixing the same after servicing & synthetic enamel spray paint of roter & blade complete all as specified and directed.
106M&L for point wiring with 1.5 Sq mm single core PVC insulated unsheathed copper FRLSH multi stranded conductor cable in and including Concealed PVC conduit of size not less than 25mm ISI marked inclusive of tees ,bend ,elbows etc upto and including sunk in anodized pressed steel box and suitable size modular plate for fitting switch, socket etc complete including PVC insulated multi stranded copper conductor 1.5 Sq mm FRLSH cable as earth wire to common earth dolly for connection to ceiling rose to earth terminal including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed by Engr-in-charge for following :-
107(a) One light point controlled by one, one way switch 5 Amps complete all as specified and directed.
108(b) One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator complete all as specified and directed.
109(c) One 3 pin 5 Amps switch socket outlet point controlled by one switch on the same board complete all as specified and directed.
110(d) One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent boad complete all as specified and directed.
111All as per item No 106 here in before but using 2.5 sq mm single core copper conductor cable of multistranded FRLSH, PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 2.5 sq mm copper conductor FRLSH, PVC wire as earth continuity conductor along with wiring and connecting to the common earth dolly complete all as specified and directed.
112S&F for modular Switch flush type single pole 5/6 amp, one way single module 230 Volts complete all as specified and directed at site.
113S&F for modular Switch flush type single pole 15/16 amp, 230 Volts complete all as specified and directed at site.
114S& F for modular socket outlet 2/3 pin, 5/6 Amp (2 module) 230 Volts complete all as specified and directed at site.
115S&F for modular socket outlet 2/3 pin, 06/16 Amp (2 module) 230 Volts complete all as specified and directed at site.
116S&F for Ceiling rose, surface Bakelite with 3 terminals PVC ISI marked for batten fitting complete all as specified and directed.
117S&F for Modular Fan step regulator, 120W - 2 module complete all as specified and directed.
118Lamp holder, PVC/Polycarbonatetype with back plate suitable for batten fittings complete all as specified and directed.
119S&F for 9/10W LED Bulb, 230 Volts B-22 base complete all as specified and directed.
120Supply and fixing in replacement Industrial grade LED light fitting mirror light with high out put diffuser 2 feet, 10 watt batten decorative type high tranmissitvity diffuser, luminous efficacy not less than 110 lumen/watt,THD <10% , Glare Free, natural white, power factor greater than 0.95, Color Temp 6500K(Cool white), CRI 80, In-built surge protection of 4 KVA, 230 volts complete with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.
121S & F in replacement wall mounted Industrial grade LED tube light fitting 20 Watts batten for surface mounted, anodized extruded aluminium housing, high tranmissitvity diffuser, luminous efficacy not less than 120 lumen/watt,THD <10% , Glare Free, natural white, power factor greater than 0.95, Color Temp 6500K(Cool white), CRI 80, In-built surge protection of 4 KVA, 230 volts complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 mm from ceiling rose to fitting complete all as specified and directed.
122S&F in replacement Industrial grade LED light fitting 1x9W/1X10W aluminium body bulkhead luminaires with built-In power LED driver, power factor >0.97, IP-65, Voltage Surge Protection Circuit up to 4 KVa, 100 lumens/watt including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.
123Supply and fixing in replacement LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency 120 lm/W, PMMA diffuser soft glare free light, CRI not less than 80, Surge Protection 4.0kva, IP-65 complete with driver, holders & LED lamp daylight/cool day light (5700K/6500K) suitable for roof ceiling including connecting up with driver three core flexible copper conductor cable of suitable size complete all as specified and directed.
124S & F in replacement for Industrial grade Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP66 & IK07 for security light fitting luminaire (120 lm/watt), with toughened glass, CRI>80, Power Factor >0.95 with high power LEDs as light source and electronic driver of capacity 35 watts with pre wired and necessary mounting arrangements and provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as specified and directed.
125S & F in replacement MCCB DB VTPN 4 way 250A rated with metal double door, IP:43 protection, Isolated neutral bar, Insulated busbar assembly, Door earthing, Mechanical impact strength IK 09 suitable for upto 160A 4P MCCB as I/C (Frame 2) and suitable for MCBs as outgoing including grouting/flush in wall and making good to disturbed surfaces incl fixing material/ accessories complete all as specified and directed.
126S & F in replacement for sheet metal enclosure MCB DB SPN 12 way with 200 Amps rated bus bar 240 volts double door with push/slide locking system including filling any blank slot with blanking plates & necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and directed.
127Supply and fix in replacement MCCB 100 Amp 415 volts 16kA 4 pole complete all as specified and directed.
128S & F in replacement MCB TP 40 to 63 Amps, 415 Volts breaking capacity 10 KA, 'C' curve complete all as specified and directed.
129S & F in replacement MCB SPN 40 to 63 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and directed.
130S & F in replacement MCB Single pole rated capacity 6 to 32 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and directed.
131M & L in replacement for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLSH cable with stranded copper conductor of size 6 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 6.0 Sqmm (nominal area) stranded copper conductor FRLSH cable as earth wire complete all as specified and as directed. Note:- Two runs of 6 sqmm cable,one run of 6 sqmm cable and one run of PVC conduit will be measured as one unit
132M&L for GI electrode chemical earthing, pipe in pipe technology of high conductive, corrosion resistant, CPRI tested maintenance free chemical earthing pit to achive earth resistance value less than or equal to 3 Ohm & EN voltage < 02 V,pipe in pipe technology based in which primary conductor (Pipe) having 40 MM dia and primary conductor is inserted into secondray conductor having 80 MM dia. The primary conductor is inserted into secondory conductor and space between secondary and primary conductor of earthing electrode should be crystalline compound. The length of this electrodes is min 3000 MM (3 meters) and earth pit's bore hole should be of dia 200 to 250 mm and min depth 3.50 meters. Length of electrode will be increase with galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel, and total depth should not less than 3.50 meters. Around the earth electrode earth pit borehole should be backfilled with minimum 50 Kg of ground enhencement compound ERIC Contains mixture of Silica sulphate,Alumina, Iron Oxide, titanium Oxide, Calcium Oxide,Sodium Oxide, Zink Oxide etc.). including RCC earthing pit having 450 x 450 Cl chamber cover all as directed by Engineer-in-Charge.(Note: If less than 3 Ohm result has not acheived at site the contractor is responsible to do grid system to achieve the desired result and no extra payment shall be made to the contractor for making grid system.)
133Supply & Laying in replacement, connecting, testing and commissioning of XLPE LT UG cable of size 35 sqmm 3 1/2 core PVC insulated and sheathed armoured heavy duty cable 1100 V grade with alu conductor cable complete all as specified and directed.
134Excavation in trenches in loose/soft soil not exceeding 1.5 metre wide and not exceeding 1.5 metre deep for laying of cables, poles/stays and struts etc and getting out including trimming sides and forming bottom surface complete all as specified and directed.
135Removing excavated surplus (soil) obtained from excavation to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and directed.
136Returning & filling in including spearing, leveling watering and well ramming in layers not exc 25cm thick complete all as specified and directed.
137Supply and Spread dry river sand for cable cushioning in trenches complete all as specified and directed.Note: Punned down thickness shall be considered for measurement.
138Supply and lay burnt bricks sub class ‘B’ old size laid dry in trenches across the cable protection complete all as specified and directed.
139S& F GI pipe light grade 50 mm dia of for cable connection with all fitting and fixed complete to walls and ceilings or laid in floors/wall complete all as specified and directed. S&F steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes confirming to I.S. 1161-1998 Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58593303
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 76.57 Lakhs
LAST DATE 16-12-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for special Repair To Bldg No P-16 Office Complex Of 299 Fd Regt At Dipatoli Pocket Of Ranchi Mil Stn Under Ge Dipatoli
Basic Detail
Tender No 80599/1755/E8
Bidding Type Tender
Location
City Ranchi
State Jharkhand
Key Dates
Publish Date 18 Nov 2026
Submission Date 16 Dec 2026
Open Date 23 Dec 2026
Finance
Tender Value 76.57 Lakhs
Tender Fee 1000
EMD 1.40 Lakhs
Exemption Available
Document List
1755Tender.pdf
BOQ_896409.xls
e6dffe86-0a72-4765-81a8-87426a184e38.html
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 18, 2026
11:30 IST

Tender Published

Tender notice published.

Today
Dec 16, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 28 days
Dec 23, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 35 days

Tender Documents

Download All (ZIP) ↓
pdf

1755Tender.pdf

xls

BOQ_896409.xls

html

e6dffe86-0a72-4765-81a8-87426a184e38.html

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender