Tender For Repair /Maint Of Sewage Line, Chequired Tiles, And Plain Cement Concrete Hardstanding For Md Accn Area At Mil Stn
Tender Value
9.85 Lakhs
Estimated cost
Bid Submission
07 Dec 2026
19 days left
EMD
19700
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Udaipur → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair /Maint Of Sewage Line, Chequired Tiles, And Plain Cement Concrete Hardstanding For Md Accn Area At Mil Stn
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of PCC floor and pavings (un-reinfored) n.exc 15 cm thickness (below or above ground level) and including floor finishes etc complete all as specified and directed. |
| 2 | M&L for 75 mm thick PCC 1:4:8, type D2 (using 40mm graded stone aggregate) as in sub base complete all as specified and directed by Engineer-in-Charge. |
| 3 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc.,of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand andcutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; all complete as specified and directed. |
| 4 | Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratorymethod using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand;complete all as specified and directed. |
| 5 | M&L Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry with gray cement and pigment in floors over 20 mm thick screed bed in CM 1:6 including complete all as spcified and directed. |
| 6 | Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed by Engineer-in-Charge |
| 7 | M & L brick work with subclass ‘B’ bricks, straight or curved on plan exc 6 m mean radius built in Cement mortar 1:6 as in walls,drains etc, all as spcified and direcrted. |
| 8 | M&L for rendering 15mm thick in CM (1:4) finished even and smooth without using extra cement on external surfaces of concrete surfaces of wall/Drain complete all as specified and directed. |
| 9 | Material and Labour extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds , mitred /stopped ends etc., complete all as specified and directed. |
| 10 | Excavation in trenches n exc 1.5 Mtr wide and n exc 1.5 M deep and getting out in Soft/Disintegrated Rock by using of mechincal plant or chisel cutting for shafts, wells, man holes and for sewage lines and foundation etc n exc 10 Sqm on plan all as specified. |
| 11 | Returning filling in of excavated any type soil including spreading leveling watering and well ramming in layers n exc 25 cm thick all as specified and directed by Engineer-in-Charge. |
| 12 | Removal of surplus soil/excavated material exc. 250 m but n exc. 500 m and depositing where directed. |
| 13 | Taking up broken old sewage pipe any type and size line in average depth 1.00mtr and removal of soil upto 500m complete all as directed. |
| 14 | Provinding lowering, laying, aligning, fixing in position and joining at all level/ depths full round HDPE DWC (Duble wall corrugated) 150 mm dia pipes with reqd jointing accessories of SN8 grade as per IS 16098 (Part 2) amended upto date in trenches in complete including all material, labour, sectional hydrotesting (including the cost and conveyance of water to site fortesting) and Comissioning as per Technical Specifications, drawings and as per direction of Engineer in charge. |
| 15 | Provinding lowering, laying, aligning, fixing in position and joining at all level/ depths full round HDPE DWC (Duble wall corrugated) 200 mm dia pipes with reqd jointing accessories of SN8 grade as per IS 16098 (Part 2) amended upto date in trenches in complete including all material, labour, sectional hydrotesting (including the cost and conveyance of water to site fortesting) and Comissioning as per Technical Specifications, drawings and as per direction of Engineer in charge. |
| 16 | Demolition and breaking up of CI/AC rain water pipe/sewage pipe /UPVC pipe line 100mm/75mm dia fixed to walls upto tripple storey height of bldg ,laid in trenches incl all fittings, complete all as specified. |
| 17 | Supply & Fixed for 110mm dia PVC (SWR) pipes single socketed, in any length with rubber rings joints or jointed with solvent cement joint, laid in trenches or in floors, complete all as specified and directed.(Note- Rubber rings for pipes and fittings shall be conforming to IS 5382-1985) |
| 18 | Supply & Fixed for 110mm dia PVC (SWR) pipes single socketed,in any length with rubber rings joints or jointed with solvent cement joint fixed to wall, complete all as specified and directed.(Note- Rubber rings for pipes and fittings shall be conforming to IS 5382-1985)(The work to be executed upto tripple storey height of building ) |
| 19 | Supply & Fixed for 75 mm dia PVC (SWR) pipes single socketed in any length with rubber rings joints or jointed with solvent cement joint fixed to wall, complete all as specified and directed.(Note- Rubber rings for pipes and fittings shall be conforming to IS 5382-1985)(The work to be executed upto tripple storey height of building ) |
| 20 | Supply & Fixed for 110 mm bore UPVC (SWR) bend with access door including jointing with solvent cement, complete all as specified.(Note- UPVC bends shall be conforming to BS 4515 DIN 19531 and DIN 19534) (The work to be executed upto tripple storey height of building ) |
| 21 | Supply & Fixed 110 mm bore UPVC (SWR) ( singleT) equal or unequal including jointing with solvent cement, complete all as specified.(The work to be executed upto tripple storey height of building ) |
| 22 | Supply & Fixed 110 mm bore UPVC (SWR) branch piece,single ( singleY) equal or unequal including jointing with solvent cement, complete all as specified. .(The work to be executed upto tripple storey height of building ) |
| 23 | Supply & Fixed for 75 mm bore UPVC (SWR) bend including jointing with solvent cement, complete all as specified. (Note- UPVC bends shall be conforming to BS 4515 DIN 19531 and DIN 19534)(The work to be executed upto tripple storey height of building ) |
| 24 | Cleaning of manholes to 1.50 m depth by taking out semi solid/solid sludge complete and removing sludge in covered vehicle out of MOD land complete all as specified and as directed. |
| 25 | Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required all complete as specified and directed. |
| 26 | Dismantling structural steel work including doors, gates but excluding framed truss etc. |
| 27 | S & F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete (Fe-410-W Gde E-250 quality A) all as specified and directed. |
| 28 | Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings all as specified and directed. |
| 29 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with selftapping screws as specified and directed. |
| 30 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of anycolour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with selftapping screws as specified and directed. |
| 31 | M&L for two coats of synthetic enamalled paint over one coat of red oxide primer on new steel surfaces over 10 Cm width or girth, including preparation of the surface complete all as specified and directed. |
| 32 | All as per item No 31 above but not exc10 cm width or girth complete all as specified. Note:- Flat iron will be painted before fixing. |
| 33 | Dismantling fencing wire mesh any type and any size. |
| 34 | Supply only Chain link MS galvanised fencing, any size or type, weight not less than 2.80 Kg/Sqm complete all as specified and directed. |
| 35 | Fixing only chain link fencing including line wires/ MS round bar (Any numbers), any mesh, size and type to any type of standards rails, straining bolts, etc including provision of binding wire (Note. Supply of flat iron, MS round bar & chain link shall be measured and paid seperately under supply only) |
| 36 | S & F 12 mm dia MS screw bolts any size (machine made) with hexagonal or square heads at one end and screwed the other ends, fitted with washer and one one hexagonal nut exc 5cm long but n exc 10cm cmplete all as specified and directed. |
| 37 | Supply only MS rounded bars Fe-290 (Gde-165) 10 mm dia and over cut to length and bend to shape as required as in tie bars, secured with nut, bolt and washers complete all as specified and directed by Engineer-in-Charge. |
| 38 | Dismantling posts or struts (wood, steel or RCC) any section, including taking out embedded portion in concrete and making good disturbed ground complete all as specified and directed by Engr-in-Charge. |
| 39 | M&L for PCC (1:3:6) type C2 by using 40 mm well graded stone aggregate as in boundery Pillers and posted foundation, complete all as specified and directed. |
| 40 | Excavating in post holes (or similar holes) each n.exc 0.50 Cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in any type of soil complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 18, 2026
11:30 IST
Tender Published
Tender notice published.
TodayDec 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysDec 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 24 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender