Defence Statutory Bodies & Commissions/Committees Closing in 12 days TDR #58593300

Tender For Provn Of Concrete Perimeter Path For Patrolling And Certain Sanctioned Works At Af Stn Mumbai Under Ge (Af) Thane

Issued by Statutory Bodies & Commissions/Committees · Thane, Maharashtra
Tender Value
47.70 Lakhs
Estimated cost
Bid Submission
30 Nov 2026
12 days left
EMD
95400
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Thane → Maharashtra
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Provn Of Concrete Perimeter Path For Patrolling And Certain Sanctioned Works At Af Stn Mumbai Under Ge (Af) Thane

BOQ

Name of Work:- PROVN OF CONCRETE PERIMETER PATH FOR PATROLLING AND CERTAIN SANCTIONED WORKS AT AF STN MUMBAI UNDER GE (AF) THANE
Sl. No. Item Description
1Surface excavation n.exc (not exceeding) 30cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed by Engineer-in-charge.
2Excavation in trenches n exc 1.5m wide & n exc 1.5 m in depth and getting out hard/dense soil complete all as specified and directed by Engineer-in-charge.
3Excavating over areas, n exc 1.5 m deep and getting out hard/dense soil complete all as specified and directed by Engineer-in-charge.
4Material & labour for rolling and consolidation of formation of surfaces in cutting with power roller of 8 to 12 tonne capacity power roller including filling up depression which occur during rolling complete all as specified and directed by Engineer-in-charge.
5Material & labour fo Soling (or sub base) with broken boulders or quarried stone interstices filled of size 63mm to 100mm, surfaces formed and rolled and consolidated to required gradient and camber spread thickness 200mm in single layer complete all as specified and directed by Engineer-in-charge.
6Removing excavated material exc. 250 m but n exc 500m and depositing where directed complete all as specified and directed by Engineer-in-charge.
7M&L hardcore of broken stone or boulders gauge exc 63 mm but n exc. 100 mm , deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surfacecomplete all as specified and directed by Engineer-in-charge.
8M&L for 100mm thick plain cement concrete nominal mix type D2 1:4:8 (using 40mm graded crushed stone aggregate) as in sub base complete all as specified and directed by Engineer-in-charge.
9Supply and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved clour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/shape, made by table vibratory method using PU mould laid in required colour & pattern over nand including 50mm thick compacted bed of fine sand, compacting and proper embedding /laying of inter locking paver blocks into the sand bedding layer through vibratory copmpaction by using plate vibrator, filling the joints with sand and cutting of paver block as per requirred size and pattern, finishing and sweeping extra sand complete all as specified and directed by Engineer-in-charge.
10Supply and laying 80mm thick factory made chamfered edge cement concrete paver block of M-40 grade with approved clour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/shape, made by table vibratory method using PU mould laid in required colour & pattern over nand including 50mm thick compacted bed of fine sand, compacting and proper embedding /laying of inter locking paver blocks into the sand bedding layer through vibratory copmpaction by using plate vibrator, filling the joints with sand and cutting of paver block as per requirred size and pattern, finishing and sweeping extra sand complete all as specified and directed by Engineer-in-charge.
11Supply and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever requiredcomplete all as specified and directed by Engineer-in-charge.
12M&L for two coats of cement base paint including prepration of surfaces plastered or unplastered as in concrete surfaces complete all as specified and directed by Engineer-in-charge.
13M&L for plain cement concrete nominal mix type D2 1:4:8 (using 40mm graded crushed stone aggregate) as in foundation filling of mass concrete/manhole foundation complete all as specified and directed by Engineer-in-charge.
14M&L for reinforced concrete pipe 300mm bore in pipe , class NP2, laid and jointed complete with collars complete all as specified and directed by Engineer-in-charge.
15Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed by Engineer-in-charge.
16M&L Fe410-w(grade E-250 quality -A) framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed by Engineer-in-charge.
17Excavation in post holes (or similar holes) in hard dense soil, each n exc 0.50 cum , getting out returning,filling in and ramming earth or broken rubble mixed with earth around, in layers not exc 25 cmcomplete all as specified and directed by Engineer-in-charge.
18M&L for PCC 1:3:6 Type C2 (40 mm graded stone aggregate) in post, foundation, filling and mass concrete complete all as specified and directed by Engineer-in-charge.
19M&L rolled sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc. complete all as specified and directed by Engineer-in-charge.
20Supply only Chain link MS galvanisd pvc coated fencing, any size or type complete all as specified and directed by Engineer-in-charge.
21Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc,including provission of binding wire, complete all as specified and directed by Engineer-in-charge.
22S&F Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying atcrossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed by Engineer-in-charge.
23S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240, complete all as specified and directed by Engineer-in-charge.
24S & F for Plates (plain ) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted,bolted or welded attachment, Fe 410-W (Gde-E-250) quality-A,flat iron, etc with ornamental and intricate design complete all as specified and directed by Engineer-in-charge.
25S&F Fe 410-W (GdeE- 250) quality rolled sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc. complete all as specified and directed by Engineer-in-charge.
26S & F for Mild steel screw bolts ( Machine made) with hexagonal or square heads at one end and screws the other or screwed both ends. each screwed and to be fitted with washers and one hexagonal or square nut length at bolt exceeding 5 cm but not exceeding 10 cm long for 11 to 15mm dia of neck complete all as specified and directed by Engineer-in-charge.
27S & F Prepainted galvelum aluminium zinc coating sheet GI based corrugated steel sheet 0.5mm thick of desired colour as per direction and having tensile strength of 550 Mpa as in roof covering with selftapping screw, complete all as specified and directed by Engineer-in-charge.
28M&L for Preparation of new steel surface not otherwise described and applying two coats of Aluminium paint over a coat aluminium red oxide primer complete all as specified and directed by Engineer-in-charge.
29M&L for 75 mm thick cement concrete type C-2, 1:3:6 (40mm graded aggregate) as in plinth protection finishing even and smooth without using extra cement complete all as specified and directed by Engineer-in-charge.
30M&L for 75mm thick PCC 1:4:8 type D-2(40 mm graded aggregate) as in sub base surface complete all as specified and directed by Engineer-in-charge.
31M&L for 40 mm thick cement concrete type B-1, 1:2:4 (20mm graded aggregate) as in floor as specified and as direxted complete all as specified and directed by Engineer-in-charge.
32M&L brick work with sub class ‘B’ bricks straight of curved on plan exc 6m mean radius built in in CM 1:6 complete all as specified and directed by Engineer-in-charge.
33M&L for 15 mm thick cement plaster on stone or concrete surfaces in CM 1:4 mixed with water proofing compound @ 200ml by weight of cement including 10m height steel scaffolding complete. [Note:- WPC shall be measured and paid separately ] complete all as specified and directed by Engineer-in-charge.
34Supply of liquid water proofing compound complete all as specified and directed by Engineer-in-charge.
35M&L for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 Litres/10sqm over and including priming coat of exterior primer applied @ 0.90 Ltr / 10sqm over new surfaces complete all as specified and directed by Engineer-in-charge.
36S & F for Steel work in tubular trusses and similar works including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240,etc for ornamental and intricate design complete all as spd and directed. (for Height of building max 20m) complete all as specified and directed by Engineer-in-charge.
37S & F for Plates (plain ) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted,bolted or welded attachment, Fe 410-W (Gde-E-250) quality-A,flat iron, etc with ornamental and intricate design complete all as spd and directed complete all as specified and directed by Engineer-in-charge.
38M&L for Preparation of new steel surface not otherwise described and applying two coats of Aluminium paint over a coat aluminium red oxide primer complete all as specified and directed by Engineer-in-charge.
39S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering, fixed with self tapping screws as specified etc using necessary scaffolding upto height 20m as specified and directed. complete all as specified complete all as specified and directed by Engineer-in-charge. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58593300
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 47.70 Lakhs
LAST DATE 30-11-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Provn Of Concrete Perimeter Path For Patrolling And Certain Sanctioned Works At Af Stn Mumbai Under Ge (Af) Thane
Basic Detail
Tender No GE (AF) T-55 OF 2026-27 (8663)
Bidding Type Tender
Location
City Thane
State Maharashtra
Key Dates
Publish Date 18 Nov 2026
Submission Date 30 Nov 2026
Open Date 07 Dec 2026
Finance
Tender Value 47.70 Lakhs
Tender Fee 500
EMD 95400
Exemption Available
Document List
BOQ_896829.xls
fe53cb54-8838-4015-9300-92de4325c354.html
TD8663.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 18, 2026
11:30 IST

Tender Published

Tender notice published.

Today
Nov 30, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 12 days
Dec 07, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 19 days

Tender Documents

Download All (ZIP) ↓
xls

BOQ_896829.xls

html

fe53cb54-8838-4015-9300-92de4325c354.html

pdf

TD8663.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender