Defence Statutory Bodies & Commissions/Committees Closing in 21 days TDR #58593290

Tender For Special Repair For Refurbishment Of 05 X Other Rank Convenience And Bathroom Block Of Building Number P-08 And P-09 (Other Rank Living) Of 14 Guards Under Garrison Engineer (North) Patiala Military Station

Issued by Statutory Bodies & Commissions/Committees · Patiala, Punjab
Tender Value
Ref. Documents
Estimated cost
Bid Submission
09 Dec 2026
21 days left
EMD
47440
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Patiala → Punjab
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Special Repair For Refurbishment Of 05 X Other Rank Convenience And Bathroom Block Of Building Number P-08 And P-09 (Other Rank Living) Of 14 Guards Under Garrison Engineer (North) Patiala Military Station

BOQ

Name of Work:- SPECIAL REPAIR FOR REFURBISHMENT OF 05 X OTHER RANK CONVENIENCE AND BATHROOM BLOCK OF BUILDING NUMBER P-08 AND P-09 (OTHER RANK LIVING) OF 14 GUARDS UNDER GARRISON ENGINEER (NORTH) PATIALA MILITARY STATION
Sl. No. Item Description
1Taking down cement plaster of any description, any thickness from external surfaces of walls/soffits etc. incl raking out joints, hacking for keys, scrubbibg down with water etc complete all as specified and directed by Engineer-in-Charge.
2M&L for cement plastering 15mm thick in cemet mortar 1:4 including mixing of liquid water proofing compound as per manufacturer's instructions on brick work or concrete surfaces or in chajjas/parapet walls etc finished even and smooth with using extra cement complete all as specified and as directed by Engineer-in-Charge. Note : WPC will be measured and paid separately.
3Supply only integral water proofing compound complete all as specified & as directed by Engineer-in-Charge.
4M&L for cement plastering 10 mm thick in cemet mortar 1:6 on brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.
5M&L for cement plastering 5mm thick in cemet mortar 1:3 as on ceilings or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.
6Complete removal of existing treatment of any type/description from walls/RCC surfaces etc with mechanical means/grinder complete all as specified and directed.
7Complete removal of existing treatment of any type/description from ceilings/RCC surfaces etc with mechanical means/grinder complete all as specified and directed.
8M&L for applying 02 coats of exterior emulsion weather proof paint (light shade) to external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc surfaces over & including a coat of exterior wall primer as recommended for under coat by manufacturer of exterior emulsion and primer complete all as specified and directed.
9Material & labour for Applying two coats of oil bound distamper white or tinted over a coat of primer on walls incl preparation of plastered finished of wall specified and directed by Engineer-in-Charge.
10Material & labour for preparation of new plastered surfaces of ceiling and applying three coats of white wash including one coat of primer, complete all as specified and directed by Engineer-in-Charge.
11Material & labour for preparation of old plastered surfaces of ceiling and applying one coat of white wash complete all as specified and directed by Engineer-in-Charge.
12Demolition of brick work or stone/boulder masonary built in cement mortor including all quoins,arches,pillars etc complete all as specified.
13Material & labour for Brick work with sub class 'B' bricks straight or curved on plan exceeding 6m mean raidus bulit in C:M 1:6 all as specified.
14M & l for Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed.
15Material & labour for Repair to RCC sunshades, Chajjas, Balconies, Columns, bands, beams and similar RCC work at any position/height by dismantling loose/disintegrated portion and dubbing out with Cement Concrete 1:1½:3, 15mm to 50mm thick using 6 to 12mm graded stone aggregate to make up and finished to required shape including provision of necessary supports if required and stitching of cracks with mild steel U clamps made out of 8mm dia @ 150mm c/c with inserting concrete block stretcher with cement mortar 1:3 mixed with adhesive chemical (Polymer based) and reinforced with PVC chicken mesh including form work where ever required and finished with10 mm thick plastering in CM 1:4 finished even and fair without using extra cement including preparation of surfaces to receive finishes complete all as specified and directed.
16Dismantling, floor, hearth or wall tiling including CM(bedding (but not backing), removing serviceable tiles to store & rubbish off the premises
17M&L coloured glazed ceramic tiles size 450x300x7mm thick laid on vertical surfaces over 10mm thick rendering coat in CM 1:3, set and jointed in neat cement and pointed in white or coloured cement to match. The dado of same finish as of flooring shall be flush with plaster & all edges properly mitered complete all as specified and directed.
18M&L for 7 to 8mm thick Non skid joint free coloured ceramic tiles area of each tiles exc 0.11 Sqm but n.exc 0.18 Sqm laid over 15mm thick bedding layer in CM 1:4, set and jointed in neat cement slurry and pointed with white or coloured cement to match complete all as specified and directed.
19Taking down chokhats or frames (without taking off shutters from the frame) n.exc 1.50 sqm including cutting holes for hold fast for new frame and making good to make the existing surface complete all as specified directed.
20S & F PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling& fixing in opening complete all as per specification.
21Supply & fixing factory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stile:),( brown/ coffe colour) with homogeneous fine cellular structure having density of 550 KG/Cum with 2,4 or 6 raised panel design with 5mm thick Moulded PVC Sheet on the front Face & 2mm Plan colour PVC sheet on back face, supplying & fixing in frame at site as per specification.
22Taking down chowkhats or frames (without taking off shutters from the frame) exc 1.5 Sqm and n. exc 4.00 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified.
23Supply & fixing factory made Pressed steel frames made of MS sheet of 1.20 mm thickness for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc,size 125x60mm complete as specified and directed.
24M & L for Preparation of new wood surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified
25M&L for Plain cement concrete (1:3:6) type C-0,using 12.5 mm graded crushed stone aggregate as in back filling of pressed steel frame /hold fast blocks etc and similar complete all as specified and directed by Engineer-in-Charge.
26Supply & fixing factory made flush shutters 35mm thick, 7 Ply, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.
27M&L for 35mm thick glazed and skelton shutters of 2nd class hard wood (factory made) open rebated and divided to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR Pt-1 section 8 clause 8.24(a) supplied and fitted to chowkhats complete all as specified and directed.
28Butt hinges 100 mm size, cast brass with mild steel butt hinge pin, bright polished and fixed, type B-11 complete all as specified and directed.
29Supply & Fixing Aluminium handles125mm, cast type, anodised complete all as specified and directed.
30Aluminium alloy, anodised, sliding door bolt 250 mm length with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast- aluminium alloy and fixed complete all as specified and directed
31Aluminium anodised, barrel tower bolts of 200 mm size of extruded section and fixed complete all as specified and directed.
32Providing and fixing factory made extruded aluminium ventilators with 50 micron powder coating of frame of 63.5 X 38.10 X 1.29 mm including 5mm thick frosted glass in lower 55% portion of shutters and stainless steel wire gauge 0.36mm dia and 1.40 aperture in upper 45% portion of shutter and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size with and complete fixed in all respect as specified.
33Supply & Fix in repair vitreous china wash basin, white, flat back, size 550x400m excluding ditto but including brakettaps, wash basins, vitrous china (flat bsinks, basins etc with long screwed shanks and fly unts flange end bedded in red lead cement and other end fixed ack of angle back type) any size incl cutting for pinning in ends of bracketes or erecting stand and fixing and supply and 32mm dia waste pipe, waste fittings brass chromium plated for glazed ware sinks basins etc with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed
34M& L for vitreous china squatting pan Orissa pattern size 580x440mm white with 'P' or 'S' trap with integral foot rest (excluding fixing bolts, flushing cistern and flush pipe) including connection to trap and to flushing pipe anti-syphonage pipe etc complete incl making good to floor in CM 1:3 complete all as specified and directed.
35M&L for vitreous china wash down water closet pan (pedestal pattern) white (excluding fixing bolts, flushing cistern and flush pipe) plastic water closet seat black closed pattern with flat bottom and cover and mild steel chromiumm plated or aluminised hinging devise wash down water closed (Pedestal pattern) , complete all as specified and directed.
36S&F in repair for vitreous China bowl urinals (back or cornerwall type) complete including providing & fixing plugs bedding urinal against wall in cement mortar 1:2,securing urinals to plugs with &including 60mm long brass screw ,pointing around urinal back in cement, fixing automatic flushing cistern with brackets, flush pipe and waste pipe, (Ist quality) with flat back of size 465x355x265mm white with grating and unions for discharge pipe complete all as specified and directed.
37Supply& Fix in repair flushing cistern PVC valveless 10 ltr capacity syphonic action type, low leel, white with inlet, ball valve float and handle including brackets flushing cistern and 32mm bore flushing pipe (exclusive of brackets), complete all as specified and directed.
38S&F 6mm thick looking mirror fixed to wall with stainless steel plugs/connecter/spacers/screws etc. chrome finish with wooden beading french polished, etc.complete fixed in position all as specified and directed by Engineer-in-Charge.
39Taking up or down GI tubing 15mm bore pipe and connection including cleaning for refixing or removal from site as directed
40Supplying and laying of 15 mm dia Tubes, 'medium grade',galvanised,with all fittings on walls/ceiling or laying in floors complete all as specified & directed
41Taking up or down GI tubing 20mm bore pipe and connection including cleaning for refixing or removal from site as directed
42S&F 25mm bore pipe medium grade galvanised iron water tube with all fittings laid in floors fixed to wall etc complete all as specified and as directed.
43Supply & Fixing in repair brass chromium plated shower rose 125mm size with or without swivel joints any size including fixing to steel pipe or union shower arm 15mm size 195mm long with bend of 45 degree with flange of PTMT any colour (minimum weight 40gms complete in all respect all as specified.
44Supply & fixing in repair towel rail 20mm dia,D type, 60 cm long between flanges and including all accessories like brackets/screws etc as recommended by manufacturer and complete fixed in position complete all as specified.
45Supply & fixing in repair Bib taps, CP, fency type long body with wall flange screwed for 15mm bore of iron pipe or for brass ferrule and fixed in position complete in all respect all as specified.
46S&F of CP wall mixer 2 in 1 system with provision with central spout and connection for over head shower with divertor liver for 15 mm size complete all as specified and directed.
47S&F of Central Hole Basin Mixer with Regular Spout with Popup Waste System with 450mm Long Braided Hoses and fixed complete all as specified and directed.
48Supply & Fixing in repair Stop valves, fancy type, CP with long shank and cup ( concealed type ), exposed part kit with wall flange and regular body of concealed stop cock suitable for 15mm line with protection cap fixed in position complete in all respect all as specified.
49Supply & fixing in repair Angular Stop Cock with wall flange, fency type chromium plated cast copper alloy screwed down, high pressure, screwed one ends for 15mm bore of iron pipe or for union and fixed in position complete in all respect all as specified.
50S&F in repair stainless steel grating 150x150 mm size square shaped with cockroach trap for floor trap fixed in position complete all as specified .
51Supply & fixing in repair towel rail 20mm dia,D type, 60 cm long between flanges and including all accessories like brackets/screws etc as recommended by manufacturer and complete fixed in position complete all as specified.
52Supply & Fixing in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed
53Dismantling water tanks and removing to store of capacity exc 500 & n.exc 1000 ltrs.
54Supply & Fixing tripple layered rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top / cover) white colourd 1000 Ltrs capacity hoisted and fixed in position all as specified including ball brass valves, high pressure, with polythene float and fly nut complete screwed for 20mm bore iron pipe and including GI nipple/union of 20mm bore to connect GI tubing to PVC tank complete all as specified and directed.
55Supply & Fixing 25mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed in repair (Minimum weight 2 0 m m - 2 1 0 g m s .) all as specified & directed.
56Supply & Fixing in repair 25mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed in repair complete all as specified.
57Supply & fixing in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified and directed.
58Supply & fixing PVC connections 15mm size of length 450mm complete all as specified and directed.
59Dismentaling of cast iron/pvc soil waste & vent pipes of any dia mm dia incl all fittings etc complete.
60Cast iron soil, waste and vent pipe, 100mm bore, Spun pipe cast in any length, with or without ears, with cement joints,fixed to walls with and including stack clamps, nuts , bolts etc. and making necessary connections complete all as specified.
61Cast iron soil, waste and vent pipe, 100mm bore, spun pipe in any length, with or without ears, with cement joints,laid in trenches or in floors complete all as specified.
62Cast iron soil, waste and vent pipe, 75mm bore, spun pipe in any length, with or without ears, with cement joints,laid in trenches or in floors complete all as specified.
63S&F Cast iron soil, waste and vent pipe, 75mm bore, spun pipe in any length, with or without ears, with cement joints,laid in wall complete all as specified.
64Supply & fixing for CI Cowl suitable for 100 mm bore pipe as in repair, complete all as specified.
65Supply & fixing for Cast iron bends/Tee duck foot or heel rest, radius for 75 mm bore pipe, complete all as specified and directed.
66Supply & fixing for Cast iron bends/Tee duck foot or heel rest, radius for 100 mm bore pipe, complete all as specified and directed.
67Supply & fixing for PVC(SWR) rain water pipes, 110 mm bore, single socketed in any length with rubber ring joints fixed to walls complete all as specified including fixing of pipe to wall complete all as specified and as directed
68Supply & fixing PVC (SWR) bends of any radius for 110mm bore as complete all as specified.
69S&F Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, for 100mm dia including bolts and nuts and securing ends of stays to wall or roof
70S&F 50 mm bore pipe medium grade galvanised iron water tube fixed floors fixed to wall for spout etc complete including taking down old pipe complete all as specified and as directed.
71Dismantling of brick tiles or terracing tiles single layers on roofs complete all as specified and directed by Engineer-in-Charge.
72Demolition of mud phuska on roof any thickness complete all as specified and directed by Engineer-in-Charge.
73Material & labour for Cutting grooves in brick wall, 50mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and directed by Engineer-in-Charge.
74Material & labour for Providing and laying 3mm thick APP (Atactic Polyproplene Polymer) APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) laid over and including bitumen primer @ 0.30 kg / sqm by forced application complete all as specified and directed by Engineer-in-Charge.
75Material & labour cement concrete tiles, factory made, 22 mm thick, of size 250 mm x 250 mm, machine pressed and cut polished and set jointed and pointed in neat cement slurry and fabricated using grey cement & no pigments. over and including 15 mm thick cement mortar (1:3) bedding and joints grouted flush in cement mortar (1:3) mixed with integral liquid water proofing compound over roof surfaces complete all as specified and directed by Engineer-in-Charge.Note: WPC will be measered and paid separately
76Material & Labour Precast cement concrete type B1 (1:2:4) using 20 mm graded aggregate set in CM (1:4) in cover slabs for manholes complete all as specified and directed .
77Demolition of stone slab and tiles of any description or thickness as in floors, apron etc laid, bedded and pointe in any mortar complete all as directed.
78M & L for 18- 20mm thick granite (of any type) work (table rubbed and polished) in steps, Jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and including 20 mm thick cement plaster (1:3) complete all as specified.
79Demolition of reinforced cement concrete of any description for roof,colums ,beam of any type etc complete all as specified and directed.
80Use and waste of formwork to sides and soffits of slabs n. exc. 200 mm thick and similar works fair finished surfaces of concrete complete all as specified and directed.
81Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete rail ings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizon tal or sloping and similar work and fair finishes of surfaces exc 10cm but n exc 20cm wide complete all as specified and directed.
82M & L PCC 1:1.5:3 using 20 mm graded stone aggregate as in Slabs supported on walls, beams and columns in floors,roofs, landings, balconies, canopies, deck slabs and in shelves etc complete all as specified and directed.
83S & F mild steel TMT bar 10mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, beam , slab etc hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clip complete all as specified and directed.
84Material and labour for carrying out water proofing treatment of sunken floor complete all as specified under:(i) The concrete/wall surface shall be cleared thoroughly of all laitance,loose particles,dust,grease etc and any friable and unsound area which shall be chipped,cleaned and thereafter pre-wetted to a satured surface dried condition. (ii) In case of pot holes/superficial cracks,the same shall be repaired with polymer modified mortar using URP as admixture @ 10% of cement content. (iii) The polymer modified mortar using URP as admixture @10% of cement content shall also be applied on vertical surfaces after removing of plaster upto 60 cm height.(iv) The surface thus prepared shall be coated by applying 2 coats of Dr Fixit Hydrochem super in the sunken areas and extending it upto 150 mm above the finished floor level.This includes layer of a 150 mm wide strip of an open woven glass fiber mesh over the PCC benching (Gole) on the 1st coat whille it is still wet.(v) Rendering 15 mm in CM 1:4 admixed with integral water proofing compound 1 W+ @ 200 ml per bag of cement complete all as specified and directed by the Engineer-in-Charge.
85Demolition of cement concrete (un-reinforced) in any thickness(below or above ground level), complete all as specified and directed.
86M & L for plain cement concrete 1:7:12 mix, type E-2 (using 40mm graded Brick aggregate) as in filling of sunken portion complete all as specified and directed.
87M&L 25mm thick PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in sunken / floor complete as specified and directed.
88Taking down carefully existing points wiring on surface conduit/concealed conduit including conduit from surface and expect conduit in concealed wiring for light/fan/socket/power/bell from wall & roof along with fitting and fixtures such as switches, sockets, ceiling roses, batten holders, unserviceable light fittings, pieces of wires, gutties, conduit, wooden boards etc removing materials to store for keeping in safe custody of contractor for which the credit has been considered under schedule of credit and making good the disturbed portion of all floor, ceiling etc all as specified and directed.
89M&L for replacement of Point wiring with 1.5 sqmm PVC insulated and unsheathed FRLSH single core multi-stranded copper conductor for one light/fan/bell in new PVC conduit to be terminated in pressed steel terminal boxes with top cover plate including 1.5 sqmm PVC insulated and unsheathed FRLSH single core multi-stranded copper earth continuity conductor controlled by one switch and/or one regulator complete including repairing the surfaces in CM 1:3 and finishing the surface as per existing treatment all as specified and directed by Engineer in-charge Note-I-(Switches and regulators shall be measured and paid for separately). Note-II- ( Wiring shall be done as per colour code in IS for phase, neutral and earth). Note-III- (The cost of modular cover plate and metal flush boxes is deemed to be included in the unit rate quoted for this item). Note -IV - cost of Eye/bottle thimbles used for connection in switches/sockets & MCBs in DBs is deemed to be included in the unit rate quoted for this item. Note:- V- Rate of cutting chasing included in the unit rate quoted for this item
90All as per Sl item No 89 above herein before but one socket out let 5 pins 5 Amp on the same board with other switches complete all as specified and directed.
91All as per Sl item No 89 above herein before but for one socket out let 5 pins 5 Amp on independent board complete all as specified and directed.
92All as per item No. 89 herein before but 2.5 Sqmm PVC insulated and unsheathed FRLSH single core multistranded copper conductor incl 2.5 Sqmm PVC insulated and unsheathed FRLSH copper earth wire for switch socket combination 3 pin 15 amps on independent board.
93Supply & fix in replacement of Modular switch 1 way, 6 Amps, 1 module, 230 volts complete all as specified.
94Supply & fix in replacement of Modular switch 1 way, 16 Amps, 1 module, 230 volts complete all as specified.
95Supply & fix in replacement of Modular socket 5 pin 6 Amps, 2 module 230 volts complete all as specified.
96Supply & fix in replacement of Modular socket 5 pin 6 &16 Amps, combination type 2 module complete all as specified.
97S&F ceiling rose surface bakelite surface 65 x 50mm 3 terminals all as specified & directed
98M&L for replacement of Lamp holder including LED bulb 9 W including flexible wire 0.5 Sqmm copper cable all as specified & directed by Engr-in-charge.
99M & L for Sub main wiring with two single core 6.0 Sqmm PVC insulated and unsheathed FRLSH ,stranded copper conductor cable drawn through PVC concealed conduit 25 mm dia including 6.0 Sqmm PVC insulated unsheathed FRLSH stranded copper conductor cable as earth wire all as specified and directed by Engineer-in-charge. Note 1:-2(two) Runs of 6.00 Sqmm Copper conductor cable, 1 Run of PVC conduit & 1 Run of 6.00 Sqm Copper conductor Earth wire shall be measured as one unit) Note 2 :(i) Rate quoted for this items shall be inclusive of the cost of (i) Rigid non-metallic PVC conduit of 25 mm dia with tees, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. (ii) Cutting chases, pinning in making good to facing where required and pointing in cement mortar 1:3 to match the existing surfaces and cutting not exc. 10 cm girth . (iii) Including taking out/down existing unserviceable sub main wiring.
100M & L for Sub main wiring with two single core 4.0 Sqmm PVC insulated and unsheathed FRLSH ,stranded copper conductor cable drawn through PVC concealed conduit 25 mm dia including 4 Sqmm PVC insulated unsheathed FRLSH stranded copper conductor cable as earth wire all as specified and directed by Engineer-in-charge. Note 1:- 2 Runs of 4.00 Sqmm Copper conductor cable, 1 Run of PVC conduit & 1 Run of 4.00 Sqm Copper conductor Earth wire shall be measured as one unit) Note2 : Rate quoted for this items shall be inclusive of the cost of (i) Rigid non-metallic PVC conduit of 25 mm dia with tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. (ii) Cutting chases, pinning in making good to facing where required and pointing in cement mortar 1:3 to match the existing surfaces, cutting not exc. 10 cm girth . (iii) Taking out/down existing unserviceable sub main wiring.
101Supply and fix Sheet metal enclosure 8 ways double door for DBs when MCBs are to be used 240,volts including 200 Amps standard bus bar of suitable size and common neutral link all flush mounting type, drilling holes for incoming and out going cables with IP 43 protection complete all as specified & directed by Engr-in-charge.
102Supply and fix MCB , SPN, 240 Volts ,32 amp for fixing in DBs of including proper thimble connections complete all as specified and directed by Engineer-in-Charge.
103Supply and fix MCB, single pole 240 volts 6 to 32 Amp capacity for fixing in DB’s including proper thimble connections complete all as specified and directed by Engineer-in-Charge.
104Supply and fix Tube light fitting Self Ballasted LED Batten. Extruded Thermoplastic body with PC Diffuser in square LED Batten 18/20W 6500K of capacity ,20 watt,4 ft long incl 3 core flexible wire 0.5 sqmm copper cable all as specified and directed by Engr-in-charge.
105Supply and fix Exhaust fan AC single phase 230/240 v of size 300 mm sweep 1450 RPM Steel body, high efficiency 60 watt motor capable to Air delivery 1500 meter cube /hr including automatic gravity shutter, dynamically balanced blade for better performance and corrosion-resistant powder coated metallic finish including hole making Louver complete all as specified and directed by Engineer-in-Charge.
106Supply and fixing single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps, complete all as specified and as directed by Engineer-in-charge.
107Supply and fix Electric Water heater (Geyser) storage type of capacity 25 ltr BEE 5 star rated, ABS body, Copper tank with glass lined coating multiple heating option, shock safe plug puf insulation, incoly glass coated anode rod/copper heating element with ISI mark, adjustable knob for temp setting with minimum & high working pressure, multi functinoal saftey value, & whirl/swril flow technology, themostat electronic type, complete including superior quality PVC connection pipe heavy duty 15 mm dia 450 mm long, brass adopter for water connection with nickel coated ISI marked with fastener, nut bolt, washers duly grouted, giving shape to hole as suitable and plastering including making good of disturbed surface as per exisiting surface connection to inlet and outlet valves, testing complete all as specified and dirceted by Engineer-in-Charge
108Supply and fix in replacement of Elegantly designed sleek surface mounted pressure die-cast aluminium LED luminaire in powder coated white finish in round profile with optimized heat sink for efficient heat dissipation and independent electronic LED driver of capacity 12 W LED of 5000 K and making good the existing surface as per existing complete all as specified & directed. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58593290
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE Ref. Documents
LAST DATE 09-12-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Special Repair For Refurbishment Of 05 X Other Rank Convenience And Bathroom Block Of Building Number P-08 And P-09 (Other Rank Living) Of 14 Guards Under Garrison Engineer (North) Patiala Military Station
Basic Detail
Tender No GE (N)/TOKEN-93/2026-2027
Bidding Type Tender
Location
City Patiala
State Punjab
Key Dates
Publish Date 18 Nov 2026
Submission Date 09 Dec 2026
Open Date 11 Dec 2026
Finance
Tender Value Ref. Documents
Tender Fee 500
EMD 47440
Exemption Available
Document List
93.pdf
b24d99f1-8442-4cee-92f1-fb9e6335c612.html
BOQ_896868.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 18, 2026
11:30 IST

Tender Published

Tender notice published.

Today
Dec 09, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 21 days
Dec 11, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 23 days

Tender Documents

Download All (ZIP) ↓
pdf

93.pdf

html

b24d99f1-8442-4cee-92f1-fb9e6335c612.html

xls

BOQ_896868.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender