Defence Statutory Bodies & Commissions/Committees Closing in 18 days TDR #58593280

Tender For Repair, Roof Treatment And Roof Sheet In Otm Accn Including Depot Area Of 223 Abod Area Suranussi Under Age (I) Suranussi

Issued by Statutory Bodies & Commissions/Committees · Jalandhar, Punjab
Tender Value
35 Lakhs
Estimated cost
Bid Submission
09 Dec 2026
18 days left
EMD
70000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Jalandhar → Punjab
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Repair, Roof Treatment And Roof Sheet In Otm Accn Including Depot Area Of 223 Abod Area Suranussi Under Age (I) Suranussi

BOQ

Name of Work:- REPAIR, ROOF TREATMENT AND ROOF SHEET IN OTM ACCN INCLUDING DEPOT AREA OF 223 ABOD AREA SURANUSSI UNDER AGE (I) SURANUSSI
Sl. No. Item Description
1Demolition of brick work built in cement mortar including all quoins arches, pillars etc but including ashalr facing dressed stone work and precast concrete articles complete all as specified and as directed
2Demolition of cement conc (un reinf) in ground floor and pavings not exceeding 15 cm thick above or below ground level complete all as specified and as directed
3Taking down cement or cement lime plaster of any description on brick or stone walls, etc incl raking out joints hacking for keys srubbing down with water etc complete all as specified and as directed
4Taking down chowkats or frames with Shutters ( without taking off the shutter from the frame ) of area n.exc 1.50 Sqm each and removing from site complete all as specified and as directed
5Taking down chowkats or frames with Shutters ( without taking off the shutter from the frame ) of area exc 1.50 Sqm but n.exc 4.00 Sqm & removing from site complete all as specified and as directed
6Taking down shutters of any description exc 1sqm each and not exc 2.00 sqm each complete all as specified and as directed
7Refixing the shutters of any description size exc 1 sqm and n.exc 2 sqm but refixing in the same opening complete all as specified and as directed
8M&L brick work , with sub class 'B' bricks built in cement mortar 1:6 straight or curved on plan exc 6mtr mean radius, using old size bricks complete all as specified
9M&L 15mm thick cement plastering in cement mortar (1:6) on fair faces of brick work or concrete surfaces finished even & smooth without using extra cement complete all as specified.
10M&L 15 mm thick cement plastering in cement mortar (1:4) of brick work or concrete surfaces with using water proofing compound finished even & smooth without using extra cement complete all as specified. Note: Rate of water proofing compound shall be deemed to be included in rate quoted.
11M&l for 5 mm th rendering in cement mortar in 1:3 on ceiling complete all as specified and as directed
12Dismantling wall and Ceiling boards any thickness, including cover fillets complete all as specified and as directed.
13M&L for 12mm thick perforated particle board/tiles for insulation and accoustic purpose 60X60CM in size fixed in frame work /grid complete all as specified and as directed
14M & L for Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre, complete all as specified and directed by Engineer-in-Charge.
15Dismantling of asbestos cement corrugated or semicorrugated /fibre sheets in roof covering complete all as specified and directed by Engr-in-charge complete all as specified and as directed.
16S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed by engineer-in-charge
17S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed by engineer-in-charge.
18S&F 1 mm plain,galavanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with gradeof zinc coating 275 complete all as specified and as directed by engineer-in-charge.
19S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering to Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening conforming to GdeFe 290(Gde E-165) complete all as specified and as directed
20Dismantling structural steel work in cluding doors, gates but excluding framed truss etc
21S&F Roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.conforming to GdeFe 290(Gde E-165) complete all as specified and as directed.
22M&L for 35mm th IInd class Hard Wood glazed /gauged shutters open rebated and prepared to receive glass /gauge etc without sash bars edges of framing plain or chamfered rounded fitted with cut and mitred beads for securing glass/gauge etc all as specified in SSR Part I section 8 clause 8.2(a) including helical Door spring complete all as specified and as directed
23S&F solid PVC door frame of size 50mmX 47mm made out of 5mm th plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification & drawing complete all as specified and as directed
24S&F 30mm th factory made PVC door shutter solid panel consisting of frame made out of MS tubes for top & bottom rails .Ms frame shall be covered with heat moulded plain colour PVC \\"C\\" channel having a PVC strip of 20mm width stuck inside with solvent cement for stiles and plain colourPVC sheet for top rail , lock rail &bottom rail on either side & as gap insert for top rail & bottom rail . Panelling of plain of plain colur PVC sheet to be fitted in the MS frame welded/sealed to stiles & rails with suitable PVC sheet beading and joined together with solvent cement ,etc all as specified and shown on drawings complete all as specified and as directed
25S&F 35 mm thick flush shutter solid core construction with block board core and decorative face panels veneer with lipping/frame to match on both faces complete all as specified and as directed
26S&F 300mm size mild steel sliding door bolt plate type stove enamelled black with bright bolt not less than 12mm dia incl a minimum of six nut and bolts ,four on bolt plate and two on stapple plate complete all as specified
27S&F mild steel barrel tower bolt 200mm size stove enamelled black with bright bolt etc all as specified
28S&F 125 mm size mild steel pressed handle stove enamelled black and fixed complete all as specified and as directed by engineer-in-charge.
29S&F 100 mm size mild steel butt hinges medium weight cold rolled complete all as specified and as directed by engineer-in-charge.
30S&F floor door stopper aluminium alloy body and tounge 140mm anodised with hard drawn steel spring etc complete all as specified and as directed by engineer-in-charge.
31S&F in repairs Door closer hydraulically regulated, designation No. 3, universal type,aluminium extruded section suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed
32S&F galvanized mild steel wire cloth 0.56mm dia of wire and average width of aperture 1.18mm fixed with tinned tack or galvanised wire staple complete all as specified and as directed by engineer-in-charge.
33S&F in repair galvanized mild steel wire cloth 0.56mm dia of wire and average width of aperture 1.18mm fixed with tinned tack or galvanised wire staple complete all as specified and as directed by engineer-in-charge.
34S&F in repair Vitreous china ware water closet Orissa pattern including connecting to trap and to flushing pipe anti Syphonage pipe etc complete , fixed as in repairs of size 580mm X 440mm complete all as specified. Make: Hindware / Cera / Parryware. complete all as specified and as directed.
35S&F in repairs vitreous china water closet Padestal pattern( white ) includng P or S trap but excluding fixing bolts, flushing cistern and flush pipe complete all as directed.
36S&F in repairs PVC flushing cistern, 10 ltr capacity, valve less symphonic action type, low level, with intel, ball valve, float valve abd handle including brackets fixed in position, 32 mm dia PVC flush pipe and connection to water mains complete all as specified and directed by Engineer-in-Charge.
37S&F in repairs vitreous china urinal Half stall type, white, with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed.
38S& F in repair vitrious china wash hand basin flat back 550X400mm incl fixing bracket, pvc waste coupling and waste pipe,cp pillar tap etc all as specified and directed by engineer-in-charge.
39S&F in repairs 600X450mm bevelled edge looking mirror of selected quality glass of 4mm thick etc mounted on AC board complete all as specified and directed by engineer-in-charge.
40Dismantling water tanks of any description exc 250 and n.exc 500 ltr capacity and removing to store complete all as specified and as directed by engineer-in-charge.
41S&F Rotational moulded polythene water storage tanks double layer (cylinder each vertical with closed top) of capacity 500 Itrs, hoisted and fixed in position including pvc float valve 20mm size,specified in SSR Pt-1 Make : Sintex / Frontier / Polycon complete all as specified and as directed
42Dismantling water tanks of any description exc 500 and n.exc 1000 ltr capacity and removing to store complete all as specified and as directed by engineer-in-charge.
43S&F Rotational moulded polythene water storage tanks double layer (cylinder each vertical with closed top) of capacity 1000 Itrs, hoisted and fixed in position including pvc float valve 20mm size,specified in SSR Pt-1 Make : Sintex / Frontier / Polycon complete all as specified and as directed
44Taking down GI tubing and connections with all fittings 15 mm bore complete all as specified and as directed by engineer-in-charge.
45S&F 15 mm dia GI tubing , medium grade, and connections fixed to wall or ceiling, laid in floor etc complete all as specified and as directed by engineer-in-charge.
46ditto all as per item above but fixing only
47S&F in repair pvc connection 15mm size with PTMT nuts of length 450mm complete all as specified and as directed by engineer-in-charge.
48S&F in repair 15 mm bore dia bib tap (long or short body) cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for union fancy type chromium plated concealed complete all as specified and as directed by engineer-in-charge.
49S&F in repair 15 mm bore stop valve cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for union fancy type chromium plated concealed complete all as specified and as directed by engineer-in-charge.
50S &F in repairs PVC waste pipe of standard pattern not less than 75cm long 32 mm/40mm dia for WHB/steel sink waste coupling or suitable size complet all as directed.
51M&L preparing surfaces of new walls and applying two coats of oil bound distemper over a coat of primer complete all as specified
52M&L preparing surfaces new of walls and applying two caots of cement base paint over a coat of primer complete all as specified incl preparation of surfaces.
53M&L for three coats of white wash on newly plastered surface of ceiling incl preparation of surface complete all as specified.
54M&L for two coats synthetic enamel paint new wooden surface over 10 cm width or girth over a coat pink primer incl preparation of surfaces.
55M&L for two coats of synthetic enamel paint on new steel surface over 10cm width or girth over a coat red oxide primer incl preparation of surfaces.
56M&L PCC 1:4:8 type D-2 using 40 mm graded stone agg as in mass filling and sub base.
57S&F in repair PVC SWR pipe 200 mm dia fixed to walls, single socketed in any length with rubber ring joints fixed to walls etc all as specified
58S&F in repair PVC SWR pipe 110 mm dia fixed to walls, single socketed in any length with rubber ring joints fixed to walls etc all as specified
59S&F in repair PVC SWR pipe 110 mm dia laid in trenches , single socketed in any length with rubber ring joints fixed to walls etc all as specified
60S&F in repairs 100 mm dia stack clamp made out of 25x4mm Flat iron etc all as specified
61M&L for Complete repair of steel rolling shutters including servicing, overhauling of rolling shutter gear operated type or hand operated type with chain wheel and hand chain of any size by oiling , greasing to gear box , repair/replacement to guide channel, shaft, pully, gear box, hood cover, pully, bearings etc and replacement of parts like spring, pins, lathe etc and including securing guide channel to walls with PCC 1:2:4 type B1 and making good the surfaces with CM (1:4), including welding of any thickness and making the rolling shutter functional to the entire satisfaction of the Engineer in charge complete all as specified and directed by Engineer-in Charge. (size of each shutter is 10 to 25 sqm)
62Taking down Rolling shutter shutters of any description exc 10.00 sqm each complete all as specified and as directed
63M& L for 1.00 mm lath thickness Steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete gear operated type with bevel gear box & crank handle complete all as specified and directed by Engineer-in Charge.
64S&F in repair 3mm th sheet glass ordinary quality glazing with oil putty in square n.exc 0.5 sqm in each pane
65S&F in repair 6.40mm th rough cast wired figured glass with screws in n.exc 0.5 sqm in each pane complete all as specified & directed by engr-in-charge
66Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing from site.
67M&L for coloured vitrified double charge 10mm thick (sqare/rectangular ) polished, area of each tiles not exceeding 0.36 sqm in floor etc ,set and jointed in neat cement slurry and pointed in white or coloured cementto match etc all as specified over 15 mm th screed bed or bedding layer in CM (1:6) complete all as specified and directed by Engineer-in Charge.
68M&L for Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match , over15 mm th screed or bedding layer in CM 1:6 complete all as specified and directed by Engineer-in Charge
69M&L for Glazed ceramic tiles in vertical surface,skirting 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified over 10 mm th rendering backing or bedding layer in CM (1:4)and directed.
70M&L PCC 25mm th 1:2:4 type B1 using 20 mm graded stone agg as in levelling course.
71Dismantling brick tile or terracing tile single layer on roof complete all as specified and as directed by engineer-in-charge.
72Demolition of mud phuska in roofs any thickness including plastering and leeping (weather full thickness removed or part there of) complete all as specified and as directed by engineer-in-charge.
73Demolition of cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed by engineer-in-charge.
74Wire brushing end cleaning top surface of cement concrete, including flashing and juction of parapets etc
75Supply and applying polyurethane waterproofing coating on prepared concrete surface (top of prepared padding surface) of roof slab and upto 300 mm of parapets and crumple joint including junction of roof and parapet as directed by Engr in Charge, comprissing of item are as under:-(i) Surface preparation of substrate including cleaning, crack filling and priming with Nitoproof WB primer(ii) Application of Nitoproof 650 PU waterproofing membrane in multiple coats(iii) Application of Nitofoam 45 thermal insulation (80 mm avg thickness 40kg/mtr cub density)(iv) PUF insulation layer sealer coat (compatible with PU membrane)(v) Laying of 150-200 GSM geotextile layer with 150mm overtaps(vi) Laying of 25mm thick M-20 cement screed with slope 1:40(vii) Supply & Fixing of 300x300x8mm Endura-Jognson (or equivalent) cool roof tiles (SRI>78) using Nitolite adhesive
76Removal of mud/soil and retrieved material to a distance exc 5KM and thereof depositing where directed at a level not exc 1.5 mtr above the starting point complete all as directed. Note:- The contractor will arrange dispsal at his own cost and arrangement. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58593280
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 35 Lakhs
LAST DATE 09-12-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Repair, Roof Treatment And Roof Sheet In Otm Accn Including Depot Area Of 223 Abod Area Suranussi Under Age (I) Suranussi
Basic Detail
Tender No 8326/17/E8
Bidding Type Tender
Location
City Jalandhar
State Punjab
Key Dates
Publish Date 18 Nov 2026
Submission Date 09 Dec 2026
Open Date 11 Dec 2026
Finance
Tender Value 35 Lakhs
Tender Fee 500
EMD 70000
Exemption Available
Document List
8817bffe-a509-41f7-9173-e498e82534b9.html
BOQ_896720.xls
Tender17.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 18, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 09, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 18 days
Dec 11, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 20 days

Tender Documents

Download All (ZIP) ↓
html

8817bffe-a509-41f7-9173-e498e82534b9.html

xls

BOQ_896720.xls

pdf

Tender17.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender