Defence Statutory Bodies & Commissions/Committees Closing in 20 days TDR #58593264

Tender For Repair/Maintenance And Replacement To Incoming Water Supply Pipe Line From Gaj River Catchment Area To Collection Chamber,Distribution Water Supply Pipe Lines Cleaning Of Reservoirs, Clean Of Water Sump, Filtration Plant And Other Connecte

Issued by Statutory Bodies & Commissions/Committees · Kangra, Himachal Pradesh
Tender Value
Ref. Documents
Estimated cost
Bid Submission
09 Dec 2026
20 days left
EMD
56000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Kangra → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Repair/Maintenance And Replacement To Incoming Water Supply Pipe Line From Gaj River Catchment Area To Collection Chamber,Distribution Water Supply Pipe Lines Cleaning Of Reservoirs, Clean Of Water Sump, Filtration Plant And Other Connected Items At Mil Stn Dharamshala Under Ge Palampur.

BOQ

Name of Work:- Repair/maintenance and replacement to incoming water supply pipe line from Gaj river catchment area to collection chamber,distribution water supply pipe lines cleaning of reservoirs, clean of water sump, filtration plant and other connected items at Mil Stn Dharamshala under GE palampur.
Sl. No. Item Description
1Excavation in trenches n-exe 1.5 m depth and 1.5 mtr width and getting out in Hard/dense soil complete all as specified and as directed.
2Returning and filling including spreading, leveling, watering and well ramming in layer n-exc 25 mm thick in hard/dense soil complete all as specified and as directed.
3Removing excavated soil to a distance not exceeding 50 mtrs and depositing where directed at a level not exceeding 1.5 Mtr above the starting point all as specified and directed.
4Taking up or down CI/GI Pipe 100mm dia and connections, including cleaning for refixing or removal to store complete all as specified and directed.
5All as per item No. 04 above 80mm bore.
6Supply and laying in trenches GI pipe medium grade including fittings such as bends, elbows, union, socket etc.. of size 100mm dia complete all as specified and directed
7All as per item No. 06 above but in walls/ceilings/floors.
8Re-fixing only old serviceable steel tubing obtained from item No 4 above and connections after cleaning etc in new or old position of size 100mm dia (walls, ceiling, floors, etc complete all as specified and directed.
9Supply and laying in trenches GI pipe medium grade including fittings such as bends, elbows, union, socket etc.. of size 80mm dia complete all as specified and directed.
10All as per item No.09 above but in walls/ceilings/floors.
11Re-fixing only old serviceable steel tubing obtained from Item No 5 above and connections after cleaning etc in new or old position of size 80mm dia (walls, ceiling, floors, etc complete all as specified and directed.
12Taking up or down steel tubing and connections cleaning and re-fixing or removal to store of size 50mm dia GI pipe complete all as specified and directed
13All as per item No. 12 above 40mm bore.
14All as per item No. 12 above 25mm bore.
15All as per item No. 12 above 20mm bore.
16All as per item No. 12 above 15mm bore.
17Re-fixing old serviceable steel tubing and connections in new or old position of size 50mm dia (walls, ceiling, floors, etc complete all as specified and directed.
18All as per item No. 17 above 40mm bore.
19All as per item No. 17 above 25mm bore.
20All as per item No. 17 above 20mm bore.
21All as per item No. 17 above 15mm bore.
22Supply and laying in trenches of the 50mm dia GI pipe medium grade including fittings such as bends, reducer, elbows, union etc complete all as specified and directed.
23All as per item No. 22 above but in walls/ceilings/floors.
24Supply and laying in trenches of the 40mm dia GI pipe medium grade including fittings such as bends, reducer, elbows, union etc complete all as specified and directed.
25All as per item No. 24 above but in walls/ceilings/floors.
26Supply and laying in trenches of the 25mm dia GI pipe medium grade including fittings such as bends, reducer, elbows, union etc complete all as specified and directed.
27All as per item No. 26 above but in walls/ceilings/floors.
28Supply and laying in trenches of the 20mm dia GI pipe medium grade including fittings such as bends, reducer, elbows, union etc complete all as specified and directed.
29All as per item No. 28 above but in walls/ceilings/floors.
30Supply and laying in trenches of the 15mm dia GI pipe medium grade including fittings such as bends, reducer, elbows, union etc complete all as specified and directed.
31All as per item No. 30 above but in walls/ceilings/floors.
32Dismantling and taking out cast iron fittings of any type and size and removal from site complete all as specified and as directed.
33M & L cast iron fittings ISI marked such as bends (any type, radius any angle) tapers any type (straight or bend), increasing, decreasing or double socket etc) Tee pieces single branch, double branch, cross(all sockets and spigot) collars, caps and plugs tail piece size upto 150mm dia confirming to IS 1538/1993 complete all as specified and directed.
34Supply and fixing in replacement gun-metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe of size 50mm dia complete all as specified and directed.
35All as per item No. 34 above 40mm bore.
36All as per item No. 34 above 25mm bore.
37All as per item No. 34 above 20mm bore.
38All as per item No. 34 above 15mm bore.
39MS flange heavy duty, 12 mm thick suitable for 100 mm dia GI pipe including all necessary rubber gasket, nuts & bolts etc welding or securing properly with pipe by any suitable means complete all as specified and as directed by Engr-in-Charge.
40MS flange heavy duty, 12 mm thick suitable for 80 mm dia GI pipe including all necessary rubber gasket, nuts & bolts etc welding or securing properly with pipe by any suitable means complete all as specified and as directed.
41Supply and replace CI Air release valve (H-type) conforming to IS-14845 with double air outlet ball type having flanged end joints with SS spindle suitable size of 100 mm dia including jointing materials such as 3mm rubber gasket 02 Nos, 10mm dia nut & bolts and washers complete all as specified and as directed.
42Supply and fixing in replacement CI sluice valve of size 100mm dia confirming to IS - 14846 PN-1.0 non raising type both ends flanged with SS spindle with jointing materials such as nuts, bolts washers and 3mm rubber gasket 02 Nos including taking out the old unserviceable valve complete all as specified and directed.
43Supply and fixing in replacement CI sluice valve of size 80mm dia confirming to IS - 14846 PN-1.0 non raising type both ends flanged with SS spindle with jointing materials such as nuts, bolts washers and 3mm rubber gasket 02 Nos including taking out the old unserviceable valve complete all as specified and directed.
44M & L in replacement run lead joints for pipes, of size 100mm dia including lead and spunyarn complete all as specified and directed. Note: Excavation and retuning filling, removal will be measured and paid separately.
45M & L in replacement run lead joints for pipes, of size 80mm dia including lead and spunyarn complete all as specified and directed. Note: Excavation and retuning filling, removal will be measured and paid separately.
46M & L for cutting of existing road/ floor/ plinth/drain for taking out/laying of GI pipe line including necessary earth work excavation and making good to match with existing surface complete all as specified with PCC 1:3:6 type C1 by (using 20mm graded crushed stone aggregate) complete all as specified and as directed.
47Supply and fixing in replacement PVC green hose 100mm dia, 2mm thick confirming to relevant IS or approved made with including clamps, nuts, bolts and washers complete all as specified and directed by GE.
48Cleaning away all grass, vegetation bushes, wood under growth roots of trees and removing of rubbish, 60 cm width both side of pipe line from water supply collection point to pump house complete all as specified and directed.
49M&L for masonry valve pit of size 90X90X90CM (internal dimensions of chamber) built in Cement Mortar 1:6, Plain cement concrete, M-10 (Nominal mix) type C-2 (using 40 mm graded crushed stone aggregates) as in foundation filling and mass concreting and including 15mm thick plastering internally with cement mortar 1:6 and flush pointing externally as the work proceeds in same mortar and Plain cement concrete, M-15 (Nominal mix), type B-1, (using 20mm graded crushed stone aggregates) as in coping complete. 3.15 mm thick MS sheet cover, handle, locking arrangement including provision of angle iron frame 40x40x6 mm for cover and 2 foot steps made out of MS 16 mm dia round bars, wash out pipe made out of GI pipe medium grade, 50 mm dia upto 1 metre length, earth work in any type of soil including removal to a distance not exceeding 50 metre and painting steel surface with two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and as directed.
50All as per description of ser item No 49 above but of size 1.20 x 120x120cm complete all as specified and as directed.
51All as per description of ser item No 49 above but of size 75 x 75x75cm complete all as specified and as directed.
52Collecting the sample of water from different point such as under ground sump, Open well, Bore well, clear water sump for chemical and bacteriological testing of water from authorised govt lab for iron content in water, PH value, Hardness, turbidity, choride, fluoride and other parameters as per IS standrads.complete all as specified and as directed. Note : water sample testing to be carried out in quarterly basis.
53M&Lfor to prevent leakage of water pipe line at various places including required material by welding of flanged/socket/collar or at the joint of sluice valve/air release/none returne valve or damaged pipe line etc including excavation/returning and filling all as directed by GE.
54Periodical cleaning of new filter bed size 14.50 X 6.5 X 3.10M) chamber by by draining/pumping out the water, removing the sludge and cleaning by scrubbing thoroughly with wire brushes, bleaching powder, taking out the sand and gravel layers, PVC Nozzles complete if required, including alternate arrangement for bypass connection from receiving point to clean water sump without disturbing the water supply complete all as directed by Engr-in-Charge Note (i) Replacement of filter media will be measured and paid separately (ii) Broken 20mm dia PVC nozzles are to be replaced and will be measured and paid separately.
55Supply and fix PVC nozzles of 20mm dia complete all as specified and directed.
56Supply and fill old filter media (HCL free river sand) of size 1.5mm to 5mm dia complete as specified and as directed. Note :- (a) Filter media sand shall be collected from the nearest river
57Supply and fill filter media (gravels) of size 05 to 10mm ,10 to 20mm and 20 to 30mm dia in different layers complete all as specified and as directed.
58Removing the old filter media such as sand and gravels to s distance not exceeding 50 mtr and deposited where directed at a level not exc 30cm complete all as specified and directed.
59Supply and lay burnt bricks for for laying at filter bed complete all as specified and as directed.
60Supply and mixing Ortho Tolidin solution 500ml for testing of dissolved chlorine in water complete all as specified and directed.
61Supply and mixing Chlorination testing glass test Tube kit for range 0.1 ppm to 2.0 ppm complete all as specified and directed.
62Periodical cleaning of the raw water settling tank of consisting of 06 compartments of size 7.9x3.9x 3.0 Mtr each by draining/pumping out the water, removing the sludge and cleaning all the compartments by scrubbing thoroughly with wire brushes, bleaching powder complete all as specified and directed
63M & L for bailing out mud water from raw water semi UG sumps of size 7 mtr dia, 03 mtr depth, removing all mud/ sand and small stones, cleaning by scrubbing with wire brushes thoroughly complete all as directed. Note :- (a) Min 05 Nos helper will be detailed as and when required to clean. (b) The semi UG sumpsor to be cleaned within three hour of complain from the time of intimation. In case of failure compensation will be recovered at te double rate of workers. (c) The rates quoted shall be deemed to be inclusive of all T&P.
64Periodical cleaning of the clear water sump of size 5.6x5.25 mtr each by Job draining/pumping out the water, removing the sludge and cleaning all the walls/floor by scrubbing thoroughly with wire brushes, bleaching powder complete all as specified and directed (c) The rates quoted shall be deemed to be inclusive of all T&P.
65Cleaning of RCC kul of size 01 mtr at bottom and 1.3 mtr at top of height 1.5 mtr including chamber of size 2.0 x 2.0x 1.5 mtr by removing stone/ rock/ sand accumulated from river water flow as and when required basis complete all as specified and directed by Engr-in-Charge. Note :- (a) Min 02 Nos helper will be detailed as and when required to clean the RCC Kul and chamber (b) The Kul and Chamber to be cleaned within three hour of complain from the time of intimation. In case of failure compensation will be recovered at te double rate of workers. (c) The rates quoted shall be deemed to be inclusive of all T&P.
66Supply and fix solar flat collector of appx size 200 cm x 100 cm suitable for 200/500 ltr solar water heating system to raise water temp upto 60-70 degree centrigade complete with all accessories insulated valve for outgoing and incoming pipe, heat transfer fluid (Glycol) etc all as specified and directed.
67Overhauling of centrifugal/monoblock pump set of capacity up to 25HP ( Make- Kirloskar, Model No-RKB 50/15L), after removing from base plate disconnecting from pipe line and dismantling pump set, replacing US gland packing, gun metal bush, bearing and water seal and applying grease etc, reassembling the pump set and refixing back on the base plate and connecting with existing pipe line with nuts, bolts and new gasket including dismantling the motor, cleaning the motor, starter, varnishing, backing etc and reassembling the motor, painting motor and pump sets including suction and discharge pipe line with one coat of paint with spray painting also connecting the existing cable etc. including testing the pump set for full satisfaction of in-charge complete all as specified and directed. Note: 1. Defective major components/spares if required to be replaced shall be measured as supply only under respective item here-in-after and labour element included in item No 01 for replacement of major spares/components.
68Supply only shaft sleeves
69Supply only paking kit
70Supply only bearing DE & NDE
71Supply only gun metal impeller
72Supply only coupling Key
73Supply only rubber star coupling
74Disconnecting, removing, dismantling incl transporting to authorized workshop to carry out repair work and rewinding of electric motor induction type three phase 415 Volts 50 Hz AC supply with copper enameled copper wire of suitable gauge including varnishing, reassembling/ re-fixing, connecting, commissioning and testing and refix at same position complete of 25 HP capacity pump motor all as specified and directed by engr -in-charge.
75Ball bearing suitable for 5 to 15 HP induction motor of any type .
76S&F in repairs fully automatic star delta starter suitable for 25 HP pump set 3 phase, 415 volts, 50 Hz complete all as specified and directed.
77S&F cross arms made out of mild steel channel or angle section of reqd size and shape, MS shhet of any size and thickness, clamp back plate with bolts, nuts, washers bolts, welding, binding cold or hot in any shape or size as directed and painted with two coats of black bituminius paint over a coat of red oxide primer after necessary preparation of surfaces complete all as specified and directed.
78M&L for rewinding of chlorine agitator induction motor of capacity upto 0.5HP, 1410rpm, 3 phase, 415 V, 50 Hz of any make with copper conductor of the same specification as per old one after dismantling / cutting out burnt windings from stator assembly, cleaning slots
79Repair of chlorine dosing pump of capacity up tp 25 LPH, pressure up to 10 Kg/cm2 dosing pressure, self priming and continious dosing including servicing by oiling greasing, gasket, replacing unserviceable bearings, removing realignment of agitaor shaft, locking keys, blades, servicing of dosing pumps, detecting & fixing minor faults, replacing u/s knob and push buttons etc. complete all as all connected items, complete all as specified & directed.
80M&L for cleaning, scrapping out of surface and painting of all pipe lines with two coat of primer as approved colour with two coat of synthetic enameled paint complete all as specified and as approved by GE.
81S & F in replacement of submersible flat copper conductor cable 1100 Volts grade, heavy duty of size 10 Sqmm 3 Core including taking out old unserviceable cable of any type and size complete all as specified and directed.
82Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level) including removal of debris to out side Mil Stn, complete all as specified and directed.
83Dismantling floor hearth or wall tiling including cement mortar bedding ( but not backing ) removing serviceable tiles to store and rubbish off the premises etc complete all as specified and directed
84Demolition of brick work/ block masonry or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles and including removal of debris to out side Mil Stn, complete all as specified and directed.
85Dismantling plain or corrugated steel sheeting any gauge, thickness in roofs complete all as specified and as directed.
86Taking up or down 15 mm bore steel tubing and connections including complete all as specified and as directed.
87Taking up or down 20 mm bore steel tubing and connections complete all as specified and as directed.
88Dismantling PVC water tank of capacity Exc 250 Litre and not Exceeding 500 Ltr complete all as specified and as directed.
89Dismantling PVC water tank of capacity Exc 500 Litre and not Exceeding 1000 Ltr complete all as specified and as directed.
90Dismanting wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.
91M&L for 40mm thick cement concrete 1:3:6 type B1 (using 20mm graded stone aagregate) in floor finished without even and smooth without using extra cement with WPC @ 3% by wt of cement complete all as specified and directed.
92Supply only intergal Water Proofing complete all as specified and as directed.
93M&L for 75 mm thick PCC 1:3:6 type C-2 using 40 mm graded crushed stone aggregate finished even and smooth without using extra cement as in plinth protection/ path/ hardstanding, laid in panels complete all as specified and as directed
94M & L for 75mm thick Cement concrete 1:4:8 type D2 as in sub base complete all as specified and as directed
95M&L for walling of random rubble, uncoursed, brought upto courses, well bonded, bedded and solidly hearted, built in CM (1:6) complete all as specified and directed.
96All as per Sr Item No 89.00 Above but except stone.
97S&F boulders filling dry, hand packed tightly, as in wire crate apron bunds (Wire crate measured separately),complete all as specified and as directed.
98Fixing only boulders filling dry, hand packed tightly, as in wire crate apron bunds (Wire crate measured separately),complete all as specified and as directed.
99S&F 4mm dia galvanised steel wire, 100x100mm mesh, made up into mattresses or cages, lapped, wired and laid in position, including closing after filling, complete all as specified & directed. Note: The rates include for placing in position, binding and joining desewith 4mm steel wire to form complete mattresses. The mattresses shall be formed by looping the wires at each intersection.
100M&L for cement concerte 1:2:4, type B-1 (using 20mm graded crushed stone aggregates) as in cills, steps, seismic and other similar bands, plinth courses, copings, kneelers, apex stones, bed plates, bond stones etc. including weathering, slightly rounded or chamfered angles and throating including necessary formwork, complete all as specified and directed.
101M & L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square or Rectangular) area of each tile exc. 0.11 Sqm but not exc. 0.18 sqm(400x400), as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile, incl 15 mm screed bed in CM 1:6, complete all as specified and directed.
102M&L for glazed coloured ceramic tiles of size 300mm x 200mm x 7mm/450X 300X 7 mm thick. thickness in vertical surfaces over 10 mm thick rendering bed CM (1:4) layer set and jointed in neat cement slurry and pointed in coloured cement to match with the shade complete all as specified and directed
103M&L for Chequered cement concrete tiles 25x25x20-25mm / 30cmX30cmX20-25mm thick, with white cement and pigments set, jointed in neat cement slurry in floors laid over and including 15mm thick screed bed in cement mortar (1:6) complete all as specified & directed.
104S & F of 0 50 mm thick pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet of any colour as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed
105S & F of 0 50 mm thick pre-painted galvalume aluminum zinc coating GI based plain steel sheet of any colour as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed
106S&F for 15 mm bore medium grade galvanized steel water tubing with all fittings and fixed to wall/ceiling or laid in floor complete all as specified and as directed.
107S&F for 20 mm bore medium grade galvanized steel water tubing with all fittings and fixed to wall/ceiling or laid in floor complete all as specified and as directed.
108Refixing old steel tubing 15 mm bore and connections in new or old position (walls/ceilings/floors etc) after cleaning complete all as specified and as directed.
109Refixing old steel tubing 20 mm bore and connections in new or old position (walls/ceilings/floors etc) after cleaning complete all as specified and as directed.
110S&F rotational moulded polyethylene three layered water storage tank 500 Ltrs capacity (Cylindrical vertical with closed top) hoisted and fixed in position including PVC float ball valve 20mm dia with PTMT polythene float and fly nut, tank nipples with check nuts and washers complete all as specified and as directed.
111S&F rotational moulded polyethylene three layered water storage tank 1000 Ltrs capacity (Cylindrical vertical with closed top) hoisted and fixed in position including PVC float ball valve 20mm dia with PTMT polythene float and fly nut, tank nipples with check nuts and washers complete and making connections
112S&F framed work such as grills, grating, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars, barred iron doors, ladders; framed balusters; walk ways, railings, framework of water tanks and similar work conforming to Fe 290 Gde E-165 complete all as specified and as directed.
113S & F mild steel columns , purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. ade Fe 269-W (Grade E-165)
114M&L applying two coats of synthetic enamel paint over a coat of red oxide including preparation of new steel or iron surfaces exc 10 cm width or girth, complete all as specified and directed. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58593264
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE Ref. Documents
LAST DATE 09-12-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Repair/Maintenance And Replacement To Incoming Water Supply Pipe Line From Gaj River Catchment Area To Collection Chamber,Distribution Water Supply Pipe Lines Cleaning Of Reservoirs, Clean Of Water Sump, Filtration Plant And Other Connected Items At Mil Stn Dharamshala Under Ge Palampur.
Basic Detail
Tender No GEP-97/2026-27
Bidding Type Tender
Location
City Kangra
State Himachal Pradesh
Key Dates
Publish Date 18 Nov 2026
Submission Date 09 Dec 2026
Open Date 16 Dec 2026
Finance
Tender Value Ref. Documents
Tender Fee 500
EMD 56000
Exemption Not Available
Document List
4f522f2b-cd04-4f7d-a2cc-0fba221aac5e.html
BOQ_896724.xls
td.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 18, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 09, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 20 days
Dec 16, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 27 days

Tender Documents

Download All (ZIP) ↓
html

4f522f2b-cd04-4f7d-a2cc-0fba221aac5e.html

xls

BOQ_896724.xls

pdf

td.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender