Educational and Research Institute Government Departments Closing in 7 days TDR #58593060

Tender For Construction Of Liquid Nitrogen Plant Foundation At The Back Side Of Chemistry Block, Iit Ropar

Issued by Government Departments · Rupnagar, Punjab
Tender Value
4.59 Lakhs
Estimated cost
Bid Submission
25 Nov 2026
7 days left
EMD
9185
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Rupnagar → Punjab
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Construction Of Liquid Nitrogen Plant Foundation At The Back Side Of Chemistry Block, Iit Ropar

BOQ

Name of Work:- Construction of Liquid Nitrogen Plant Foundation at the Back Side of Chemistry Block, IIT Ropar
Sl. No. Item Description
1Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
2All kind of soil
3Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
4Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
5Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
61:5:10 (1 cement : 5 fine sand derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources)
7Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :
81:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size de rived from natural sources)
9Centering and shuttering including strutting, propping etc. and removal of form for
10Foundations, footings, bases of columns, etc. for mass concrete
11Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.
12Thermo-Mechanically Treated bars of grade Fe-500D or more.
13Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:
14Cement mortar 1:6 (1 cement : 6 coarse sand)
15Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.
16Hot finished welded type tubes
17Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
18Welding by gas or electric plant including transportation of plant at site etc. complete
1912 mm cement plaster of mix :
201:6 (1 cement: 6 fine sand)
21Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :
22Two or more coats on new work
23Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.
24Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)
25Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.
26Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead as per direction of Engineer - in - charge.
27For thickness of tiles above 25 mm and up to 40 mm
28Providing and laying red/white sand stone work of size 300 mm × 300 mm/450mm x 450mm and 40 mm thick in footpath, laid on 20 mm thick cement mortar bed of mix 1:6 (1 cement : 6 coarse sand), including dressing of stone, cutting, jointing with cement mortar 1:4, curing, and finishing complete as per direction of Engineer-in-Charge.
29Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge.
30With material conforming to Grade-II (size range 53 mm to 0.075 mm ) having CBR Value-25 Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58593060
AUTHORITY Government Departments
TENDER VALUE 4.59 Lakhs
LAST DATE 25-11-2026
Authority
Authority Name Indian Institute Of Technology
Work Description Tender for Construction Of Liquid Nitrogen Plant Foundation At The Back Side Of Chemistry Block, Iit Ropar
Basic Detail
Tender No IITRPR/CnP/T/26/340
Bidding Type Tender
Location
City Rupnagar
State Punjab
Key Dates
Publish Date 18 Nov 2026
Submission Date 25 Nov 2026
Open Date 26 Nov 2026
Finance
Tender Value 4.59 Lakhs
Tender Fee Ref. Documents
EMD 9185
Exemption Not Available
Document List
BOQ_982375.xls
f924f53a-e059-48ac-a85d-ae6247850cf5.html
LNP.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 18, 2026
11:30 IST

Tender Published

Tender notice published.

Today
Nov 25, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 7 days
Nov 26, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 8 days

Tender Documents

Download All (ZIP) ↓
xls

BOQ_982375.xls

html

f924f53a-e059-48ac-a85d-ae6247850cf5.html

pdf

LNP.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender