Power Boards / Undertakings / PSU Closing in 2 days TDR #58593009

Tender For Mtps- Ii - Mill Plant Division - Reconditioning Of Mill Under Bowl & Separator Body Man Hole Doors During Coh Of 2026

Issued by Boards / Undertakings / PSU · Salem, Tamil Nadu
Tender Value
Ref. Documents
Estimated cost
Bid Submission
25 Nov 2026
2 days left
EMD
14900
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Salem → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Mtps- Ii - Mill Plant Division - Reconditioning Of Mill Under Bowl & Separator Body Man Hole Doors During Coh Of 2026

BOQ

Name of Work:- MTPS- II – Mill Plant Division – Reconditioning of mill under bowl & Separator body man hole doors during COH of 2026
Sl. No. Item Description
1Charges for dismantling of eroded under bowl man hole door of size 590 mm x 605 mm x 25 mm thick with hinges, cutting and removing the existing eroded seating base frame of size : 590 mm x 605 mm x 25 mm tk. grinding the cutting edges and removing 25 mm square rope seating door frame groove, welding the door seating base frame over the under bowl, re tapping the M20 x 16 Nos. over the door seating base frame, fixing the door cover, renewal of asbestos rope and finally checking the free operation of under bowl door etc..
2Charges for dismantling of eroded RTD door of size 590 mm x 605 mm x 25 mm thick with hinges, cutting and removing the existing eroded seating base frame of size : 590 mm x 605 mm x 25 mm tk. grinding the cutting edges and removing 25 mm square rope seating door frame groove, welding the door seating base frame over the under bowl, re tapping the M20 x 16 Nos. over the door seating base frame, fixing the door cover, renewal of asbestos rope and finally checking the free operation of RTD door etc..
3Charges for dismantling of eroded mill seperator body man hole door of size : 715 mm x 1,010 mm x 25 mm tk. with hinges, cutting the existing eroded mill seperator body seating base frame of size : 650 mm x 350 mm x 25 mm tk. from the mill seperator body, grinding the cutting edges, welding the door seating base frame over the mill seperator body man hole door, cutting, removing & renewal of 25 mm square rope seating door frame groove, re tapping the M20 x 16 Nos. over the door seating base frame, fixing the door cover, renewal of asbestos rope and finally checking the free operation of manual door.
4Supply of Bearings for door Hinges (Bearing No.5118).
5Charges for fabrication of Underbowl man hole door, this work involves fabrication of under bowl door seating base frame of size : 590 mm x 605 mm x 25 mm tk. along with stiffener plate of size : 485 mm x 150 mm x 2 Nos. & 470 mm x 150 mm x 2 Nos., drilling the dia. 20 mm hole x 16 Nos., & M20 x 16 Nos. tape set threading over the fabricated door seating base frame and Reconditioning of under bowl door frame seating horizontal eroded flat surface of size 65 mm x 390 mm x 25 mm tk & vertical eroded flat surface of size 65 x 400 mm x 25 mm tk.
6Charges for fabrication of RTD door this work involves fabrication of RTD door seating base frame of size : 590 mm x 605 mm x 25 mm tk. along with stiffener plate of size : 485 mm x 150 mm x 2 Nos. & 470 mm x 150 mm x 2 Nos., drilling the dia. 20 mm hole x 16 Nos., & M20 x 16 Nos. tape set threading over the fabricated door seating base frame, Reconditioning of RTD man hole door frame seating horizontal eroded flat surface of size 65 mm x 390 mm x 25 mm tk & vertical eroded flat surface of size 65 x 400 mm x 25 mm tk.
7Charges for fabrication of Mill man hole door this work involves fabrication of mill seperator body seating base frame of size : 715 mm x 1,010 mm x 25 mm. along with stiffener plate of size : 500 mm x 160 mm x 2 Nos. & 800 mm x 160 mm x 2 Nos., drilling the dia. 20 mm hole x 16 Nos., & M20 x 16 Nos. tape set threading over the fabricated door seating base frame, Reconditioning of mill seperator body man hole door frame seating horizontal eroded flat surface of size 85 mm x 550 mm x 25 mm tk & vertical eroded flat surface of size 85 x 900 mm x 25 mm tk.
8Charges for supply of M20 x 55 mm full thread bolt & nut, Pitch:2.5 mm with spring washer/No. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58593009
AUTHORITY Boards / Undertakings / PSU
TENDER VALUE Ref. Documents
LAST DATE 25-11-2026
Authority
Authority Name Tamil Nadu Generation And Distribution Corporation Limited
Work Description Tender for Mtps- Ii - Mill Plant Division - Reconditioning Of Mill Under Bowl & Separator Body Man Hole Doors During Coh Of 2026
Basic Detail
Tender No OT 126 Mill Under Bowl
Bidding Type Tender
Location
City Salem
State Tamil Nadu
Key Dates
Publish Date 18 Nov 2026
Submission Date 25 Nov 2026
Open Date 26 Nov 2026
Finance
Tender Value Ref. Documents
Tender Fee Ref. Documents
EMD 14900
Exemption Available
Document List
878c7061-cbf8-4197-8ca3-c85236d0bd68.html
BOQ_873575.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 18, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 25, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 2 days
Nov 26, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 3 days

Tender Documents

Download All (ZIP) ↓
html

878c7061-cbf8-4197-8ca3-c85236d0bd68.html

xls

BOQ_873575.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender