Tender For Name Of Work:- Restoration Of Rain Damages Lwss Jamog Juni In Gp Juni, Tehsil- Sunni,Distt. Shimla (H.P.)(Sub Head- Construction of Pump House And Protection Wall )(Under Pdna 2025 )
Tender Value
14.65 Lakhs
Estimated cost
Bid Submission
30 Nov 2026
8 days left
EMD
29500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Shimla → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Name Of Work:- Restoration Of Rain Damages Lwss Jamog Juni In Gp Juni, Tehsil- Sunni,Distt. Shimla (H.P.)(Sub Head- Construction of Pump House And Protection Wall )(Under Pdna 2025 )
BOQ
| Sl. No. | Item Description |
| 1 | Description |
| 2 | Cutting in Earth work and disposal of excavated earth upto a lead of 20 meters . Spade Work , Pick Work , & Jumper Work |
| 3 | Excavation in foundations, trenches etc. in earth work, lift up to 1.50 mtrs. stacking the excavated soil not more than 3 mtrs. clear from the as of excavation and then returning the excavated soil in 15 cm. layers when required into plinths sides of foundations etc., consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated soil as directed within a lead of 20 mtrs.- P-J Work. |
| 4 | Providing and laying cement concrete 1:3:6 (1Cement:3sand:6 graded stone aggregate 40mm nominal size) and curing complete excluding the cost of form work in :- Foundation and Plinth |
| 5 | Providing and laying cement concrete 1:1½:3 (1 cement: 1½ sand: 3 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in. |
| 6 | Foundation and Plinth |
| 7 | Column |
| 8 | Suspended floors roofs,landina and shelves and their supports,balconies,beams,girders,bressumers and cantilever up to floor to level. |
| 9 | Providing and laying cement concrete 1:2:4 work (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in:- |
| 10 | Suspended floors roofs, landings and shelves and their supports, balconies, beams, girders, bressumers and cantilever up to floor two levels. |
| 11 | Providing and laying cement concrete 1:5:10 (1 cement : 5 sand : 10 graded stone aggregate 40 mm nominal size) with 15 % plum and curing complete excluding cost of form in retaining Walls / breast walls, the size of plums shall usually be 150 mm to 300 mm as per H.P.P.W.D. Specification |
| 12 | Providing form work with steel plates 3.15 mm thick welded with angle iron in frames 30x30x5 mm so as to give a fair finish i/c centring ,shuttering, strutting and propping etc. with wooden battens & ballies, ht. of propping & centring below supporting floor to ceiling not exceeding 4 mtrs. & removal of the same for insitu-reinforced concrete work in : |
| 13 | i) Flat surfaces such as soffits and suspended floors, roofs , landing and the like:- |
| 14 | Foundation,footings bases of columns & the like & the mass concrete. |
| 15 | Columns,pillars,posts and struts : Square, rectangular of polygonal. |
| 16 | Side and soffits of beams,beam hanunching,cantilever,bressumers and lintels not exceeding 1 mtr. In depth in all heights and floors. |
| 17 | ii) Vertical surfaces such as walls ( any thickness ) partitions and the like including attached pilasters , buttresses, plinth and string courses and the like . |
| 18 | Brick Work using common burnt clay building bricks in foundation and plinth in cement mortar 1:4 (1 cement : 4 sand) |
| 19 | Half brick masonry in common burnt clay building bricks in cement mortar1:4 (1 cement : 4 sand) |
| 20 | Providing wood work in frames of doors, windows, clearstory, windows and other frames wrought, framed and fixed in position: Sal wood |
| 21 | Providing and fixing panelled glazed or panelled and glazed shutters for doors windows & clearestory windows i/c black enamelled iron butt hinges with necessary screws: 40 mm thick Pine wood/Marindi |
| 22 | Providing and fixing Wire gauge shutters using galvanized M.S Wire gauge of I.S Gauge designation 85 G with wire of dia 0.56 m.m for door windows and clearstory windows i/c black enamelled iron butt hinges with necessary screws: 40 m.m thick 2nd Pine wood and Marindi. |
| 23 | P/F M.S Grills of required pattern in wooden frames of windows etc. with M.S. flats, Square or round bars with round headed bolts and nuts or by the screws ( Plain Grill ) |
| 24 | 20 mm cement plaster in single coat on the rough side of stone masonry for interior plastering up to floor to level i/c arises, internal rounded angles, chamfers and/or rounded angles not exceeding 80 mm in girth and finished even and smooth in c:m 1:3 (1 cement : 3 sand). |
| 25 | 15 mm cement plaster in single coat on the rough side of brick/concrete/stone walls for interior plastering up to floor to level i/c arises, internal rounded angles, chamfers and/or rounded angles not exceeding 80 mm in girth and finished even and smooth in c:m 1:3 (1 cement : 3 sand). |
| 26 | 6 mm Cement plaster to ceiling ( a) in cement mortar 1:3 ( 1 Cement : 3 Sand ) |
| 27 | Applying priming coat over new wood and wood based surface after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign sand papering and knotting. Ready mixed paint brushing with white wood primer pink. |
| 28 | Painting two coats ( Excluding priming coat) on new wood and wood based surface with ready mixed paint, brushing to give an even shade including cleaning oil, grease, dirt, dust and other foreign matter sand papering and stopping:- Ready mixed paint other than white. |
| 29 | Distempering (Two coat) with oil bound washable distemper of aproved brand and manufacture and of required shade on undecorated wall surface to give an dshade over and including a priming coat with distemper primer of approved brand and manufacture after throughly brushinf free from mortar dropping and forign matter and also including preparing the surface even and sand arpered smooth. |
| 30 | Providing 40X3 Flat iron hold fast 40cm long i/c fixing to frame with 10m.m dia bolts nut and wooden pugs and embedded in cement conc. Block 30x10x15 (1 cement: 3 sand:6 graded stone aggregate 20mm nominal size). |
| 31 | P/F anodized aluminium sliding door bolts and nuts screws etc. complete |
| 32 | 250x16 |
| 33 | P/F anodized aluminium tower bolt anodized transparent or dyed to required shade and colour with screws etc. complete |
| 34 | 250x10 |
| 35 | 200x10 |
| 36 | P/F anodized aluminium Handles anodized transparent or dyed to required shade and colour with screws etc. complete. |
| 37 | 125 m.m |
| 38 | 100 mm. |
| 39 | P/F Oxidized M.S. hooks and eyes |
| 40 | Providing and laying dry hand packed boulder soling, tightly packed under floors,including dressing,packing and filling of voids with spalls,complete in all respect. |
| 41 | 40 mm thick Cement concrete flooring 1:2:4(1cement:2sand :4graded stone aggregate 20mm nominal size) laid in one layer finished with floating coat of neat cement. |
| 42 | Pointing on Brick work with cement mortar 1:3 (1cement : 3 sand) raised and cut. |
| 43 | Providing Plinth Protection 50 mm thick in cement concrete1:3:6 (1 cement: 3 sand:6 graded stone aggregate 20mm nominal size) including finishing the top surface of concrete smooth. |
| 44 | Providing mild steel/tor Steel reinforcement for R.C.C work including bending , binding and placing in position complete up to floor two level. |
| 45 | White Glazed tiles 6 mm thick in flooring , treads of steps and landing laid on a bed of 12 mm thick cement mortar 1:3 finished with flush pointing in white cement. |
| 46 | Providing and fixing of weep hole 100 mm dia PVC pipe. |
| 47 | Providing supplying and placing boulders/stone filling behind the retaining wall,including filling,dressing and compaction as required. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysNov 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender