Tender For Providing Of Drinking Water Supply Scheme To Up Mandi Naka Chowki Antrawali Tehsil Nerwa, Distt. Shimla, H.P.
Tender Value
33.16 Lakhs
Estimated cost
Bid Submission
25 Nov 2026
4 days left
EMD
58000
Bank guarantee accepted
Document Fee
2360
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Shimla → Himachal Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing Of Drinking Water Supply Scheme To Up Mandi Naka Chowki Antrawali Tehsil Nerwa, Distt. Shimla, H.P.
BOQ
| Sl. No. | Item Description |
| 1 | Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed by Engineer-incharge and disposing of all excavated earth at dumping site ( To be arranged by the Contractor) as per satisfacation of Engineer -in- Charge through all modes of transportation including head load , animal load or mechnical means along with its leveling fine dressing and with all kinds of labour, machineries, tools equipments and safety measures and incidentals necessary to complete the work by mechnical means and labour( If required). All useful material such as stone , shingles aggregate and slates Shall be properly Stacked at site to the maximum possible extent in all leads and lifts through all modes of transportation as per direction of the Engineer -in -charge . Any loss to the public and private property during the course of execution and disposal of serviceable and unserviceable materials shall be the absolute responsibility of the contractor and shall have to be duly compensated by him in all respects including all incidental charges. |
| 2 | Providing form work with steel plates 3.15mm(three point one five millimeters) thick, welded with angle iron in frame 30x30x5mm(thirty into thirty into five millimeters),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling and removal of the same for in situ reinforced concrete and plain concrete work in Flat surfcaes such as soffits of suspended floor, roofs, landings and the like, floors etc. upto 200 mm in thickness complete as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government |
| 3 | Providing form work with steel plates 3.15mm(three point one five millimeters)thick welded with angle iron in frame 30x30x5mm(thirty into thirty into five millimeters),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling and removal of the same for in situ reinforced concrete and plain concrete work in vertical surfaces such as walls(any thickness) partitions etc. including attached pillasters buttresses, plinth and string cources and the like etc. as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government |
| 4 | Providing form work with steel plates 3.15mm(three point one five millimeters)thick welded with angle iron in frame 30x30x5mm(thirty into thirty into five millimeters),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling and removal of the same for in situ reinforced concrete and plain concrete work in edges of slabs and break in floors and walls under 20 cm thickness as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government |
| 5 | Providing and laying mechanically mixed and vibrated cement concrete 1:4:8 (1 cement:4 sand : 8 graded stone aggregate 40 mm nominal size) and curing complete excluding cost of centring and shuttering in Foundation and plinth:as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government |
| 6 | Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability in foundation and plingth as per direction of Engineer-in-charge complete as per HPPWD specifications or including carriage of materials within all leads, lifts and other incidentals.The rate inclusive of Malkhana, Royality, Octroi, GST, toll tax or any taxes imposed by the Government. |
| 7 | Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability in walls any thickness but of less than 0.1 meter thickness attached plasters buttresses plinghth and sting courses etc from top of foundation level upto floor two level as per direction of Engineer-in-charge complete as per HPPWD specifications or including carriage of materials within all leads, lifts and other incidentals.The rate inclusive of Malkhana, Royality, Octroi, GST, toll tax or any taxes imposed by the Government. |
| 8 | Providing and laying mechanically mixed and vibrated cement concrete 1:2:4 (1 cement:2 sand : 4 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work and reinforcement in centring and shuttering in suspended floor roofs landings and shelves and their supports balconies beams girders bressumers and cantilivers up to floor two levels including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government |
| 9 | Providing and laying Tor steel reinforcement of TATA, sail , Rashtriya Ispat or its substantial equivalent make for Reinforced Cement Concrete work including bending, binding and placing in position complete including cost of binding wire and other incidentals due for its completion up to all floor level complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Malkhana, Royality, Octroi, GST, toll tax or any taxes imposed by the Government. |
| 10 | White washing with lime on undecorated wall surfaces (Two Coats) to give an even shade including thoroughly brooming the surface to remove all dust dirt and other foreign matter including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Malkhana, Royality, Octroi, GST, toll tax or any taxes imposed by the Government. |
| 11 | Painting two coats (excluding priming costs) on new concrete/masonry/plaster surfaces with ready mixed paint brusging for use on floors to give an even shades including cleaning the surface of all dirt dust and other foreign matter and sand papering as required with paint other than white as per HP.PWD., Specifications of 1990 volume-I includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge. |
| 12 | Providing and laying in trenches, galvanised mild steel tubes (light grade), tube fittings (earth work in trenches to be measured and paid separately) :- • a) 25mm nominal bore includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge. |
| 13 | Providing and fixing (M.S Sheet & Angle iron) 600X600 mm dia man hole cover with frame & cantrolling chamber for wheel valve compelete. in all respect i.e locking arrangement etc.( not less than 35 kg each) and angle iron stir case for up & donw (not less than 75kg) includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge. |
| 14 | Prov. and fixing GMS tubes of following dia in walls, floors, ventilating pipe/ over flow pipe etc. including tube fittings and making the wall, floors etc. good. i.e welding with one feets 25mm flat iran both side of req.pipes. (25mm-80mm) dia. |
| 15 | Providing & fixing cantrolling arrangement with( 25 to 65) mm dia wheel valve i/c all type of tube fitting compelete. includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge. |
| 16 | Providing and placing horizontal layers filtering media duly graded screened washed and cleaned as specified by the Engineer incharge with in all leads and lifts. (a) 3mm to 6mm stone chips Baji includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge. |
| 17 | Manufacturing and fixing intake-cum-filter box 40x40x60 cm is with M.S. sheet (2.00mm thick) by cutting and welding (two layers) including MS angle actions 45x45x5 mm at corners, catch trough 20 cm on one side of box with MS bar screen having mesh size not more than 5 mm, inside MS perforated sheet with holes not more than 5mm to support filter media (Media will be paid and measured separately) Providing outlet with G.I pipe 65 mm dia GI nipple with suitable reducing socket and inside removable wire mesh strainer mesh size not more than 5mm, 25 mm dia G.I. socket for over-flow and securing fixed with plug, complete with locking arrangement and handles for lifting including placing in position at site (earth work to be paid and measured separately) with appoxy painting inside and outside as per design and drawing with all leads and lifts as per per direction and satisfaction of Engineer-in-charge. |
| 18 | Providing and fixing various capacity.store well branded ISI marked Sintex Polythene water tank with 40 (Forty) millimetre nominal size bore galvanized Mild Steel scour tube with fitting 25 (Twenty Five) millimetre nominal bore galvanized Mild Steel overflow tube with fittings and mosquito proof coupling of approved municipal design 15 (Fifteen) millimetre nominal size ball valve and mosquito proof PVC cover with locking arrangement including providing pads of size as required for inlet and outlet tube complete ISI marked per HP.PWD., Specifications includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government (a) 1000 litres net capacity tank Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysNov 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender