Housing Urban and Rular Development Local Bodies Closing in 4 days TDR #58592544

Tender For Construction Of Waiting Shed At Kollapatty Ad Street Head Of Sowthapuram Panchayat In Pallipalayam Block At Namakkal District Under Mlacds - 2026 - 2027 - Package - 02

Issued by Local Bodies · Namakkal, Tamil Nadu
Tender Value
12 Lakhs
Estimated cost
Bid Submission
27 Nov 2026
4 days left
EMD
12000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Namakkal → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Construction Of Waiting Shed At Kollapatty Ad Street Head Of Sowthapuram Panchayat In Pallipalayam Block At Namakkal District Under Mlacds - 2026 - 2027 - Package - 02

BOQ

Name of Work:- Construction of Waiting shed at Kollapatty AD Street H/O Sowthapuram Panchayat in Pallipalayam Block at Namakkal District under MLACDS - 2026 - 2027 - Package – 02
Sl. No. Item Description
1Construction of Waiting shed at Kollapatty AD Street H/O Sowthapuram
2EARTHWORK EXCAVATION for foundation in all soils and sub soils and to full depth as may be directed except in rock requiring blasting but inclusive of shoring, strutting and baling out water wherever necessary and refilling the sides of foundation with excavated earth in layers of not more than 15cm thick, well rammed and consolidated and depositing the surplus earth within the compound in places shown by the departmental officers with initial lead and lift etc. complete. (Ordinary Soil upto 0.30m)
3Cement concrete 1 : 4 : 8 mix using 40mm HBG metal for foundation including watering wherever necessary and laid in layers of not more than 15cm thick., compacting etc., complete complying with standard specifications and as directed
4Cement concrete 1 : 3:6mix using 40mm HBG metal for foundation including watering wherever necessary and laid in layers of not more than 15cm thick., compacting etc., complete complying with standard specifications and as directed
5Cement concrete 1 : 2:4 mix using 20mm HBG metal for foundation including watering wherever necessary and laid in layers of not more than 15cm thick., compacting etc., complete complying with standard specifications and as directed
6Refilling with excavated earth as per std specification etc., complete
7Brick work in following Cement Mortar using best quality Fly ash bricks of size 23x11x7cm for foundation and basement including curing etc.,complete complying with standard specification.
8Supplying & Erecting centering for sides & soffiots including necessary supports & strutting upto 3.29m height for plane surfaces in all floors with all cross bracings using mild steel sheets of size 90 x 60cm & 10 gauge stiffened, welded with steel angle
9Below GL
10above GL for roof
11column and sunshade
12Reinforced Cement concrete 1:1.5:3 using 20mm ISS HBG metal for all RCC item of works excluding cost of Rein forcement and fabricating charges, centering and shuttering but including curing and providing fixtures like fan clamps in the RCC floor or roof slabs
13Supplying and Fabricating and placing in position MS steel or Ribbed Tor Steel for all Reinforced Cement Concrete works as per the design given including cost of steel and binding wire in all floors etc, Complete complying with stanard specification.
14Plastering with CM 1:3,10mm thick.over the cement concrete for floor finish including curing etc., complete complying with standard specifications and as directed by the departmental officers. Rate for 10m2.
15Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete complying with standard specifications and as directed by the Departmental Officers. [ The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper (waterproof abrasive sheet), cost of putty blade, labour charges for grinding the joints and sand papering, two coat of putty, scrapping the putty area to level the surface smooth, etc., complete]. The Putty shoule be got approved by the Executive Engineer before use on work.
16Plastering with CM 1:5, 12mm thick.in all floors including curing etc., complete complying with standard specifications and as directed by the departmental officers. Rate for 10m2.
17Floor finishing with granolithic cement concrete 1:2:4 to a thickness of 25 mm (One cement, Two Sand and four broken granite metal)using 10 to 12 mm ISS Broken Hard granite metal including watering whenever necessary and paid in lay not more than 15 cm compacting etc., complete complying with standard specification.
18Distembering two coats using best approved Interiar oil destember with one coat primer over New plastered Surface including cost and conveyance of materials and labour charges etc complete
19Exterior Emulsion painting two coats with best approved quality and colour paint over one coat of Base coat including cost and convyance of all materials to work site and labour charges etc., complete.
20COMPOUND WALL
21Earth work excavation for foundation in all soils and sub soils except hard rock requiring blasting etc. complete as per SS 20B Upto 0.30 m Depth
22Cement Concrete 1:4:8 using 40mm ISS HBG metal including cost and conveyance of all materials and labour charges for laying curing etc. complete as per standard specification.
23Supply and fabrication and placing inposition M.S. or R.T Steel for all reinforced cement concrete work as per type design given including cost of steel and binding wire in all floors etc., complying with standard specification. (MS rods or RTs bar will
24Supply and erecting centering for sides and soffits including supports and structing for plain surface in all flooors with all cross brassiles using country wood planks of 40mm thick upto 30 cm and country wood scantlings upto 4 m length for beading and
25Below GL
26above GL
27Reinforced cement concrete 1:1.5:3 mix (one cement two sand and four broken stone) using 20 mm gauge machine broken hard granite stone jolly for all R.C.C. items of works excluding cost of reinforcement and fabricating charges including centering of all
28Brick work in following Cement Mortar using best quality Fly ash bricks of size 23x11x7cm for foundation and basement including curing etc.,complete complying with standard specification.
29Plastering with cement mortar 1:5 to 12 mm thick including cost and conveyance of all and labour charges on complete.
30Exterior Emulsion two coats with best approved Plastic Emulsion including cost and conveyance of all materials to site and all labour charges etc complete
31Retaining wall
32Earth work excavation for foundation in all soils and sub soils except hard rock requiring blasting etc. complete as per SS 20B Upto 0.30 m Depth
33Cement Concrete 1:4:8 using 40mm ISS HBG metal including cost and conveyance of all materials and labour charges for laying curing etc. complete as per standard specification.
34Supply and erecting centering for sides and soffits including supports and structing for plain surface in all flooors with all cross brassiles using country wood planks of 40mm thick upto 30 cm and country wood scantlings upto 4 m length for beading and
35Below GL
36Cement Concrete 1:3;6 using 20mm ISS HBG metal including cost and conveyance of all materials and labour charges for laying curing etc. complete as per standard specification.
37GST Amount for providing Service to Government Contract Works for the above RENEWAL Works. { GST Amount is the Total GST Amount for overall quoted amount above this row in column \\"BB\\" for all works in this package}(Refer Clause 13.2 & 13.3 of Section 2 of Instruction to Bidders (ITB) of SBD) Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58592544
AUTHORITY Local Bodies
TENDER VALUE 12 Lakhs
LAST DATE 27-11-2026
Authority
Authority Name Rural Development And Panchayats Department
Work Description Tender for Construction Of Waiting Shed At Kollapatty Ad Street Head Of Sowthapuram Panchayat In Pallipalayam Block At Namakkal District Under Mlacds - 2026 - 2027 - Package - 02
Basic Detail
Tender No 3888/2026/A2
Bidding Type Tender
Location
City Namakkal
State Tamil Nadu
Key Dates
Publish Date 18 Nov 2026
Submission Date 27 Nov 2026
Open Date 27 Nov 2026
Finance
Tender Value 12 Lakhs
Tender Fee Ref. Documents
EMD 12000
Exemption Available
Document List
3d180812-3e7b-4131-b726-044bd86c26a2.html
BOQ_873591.xls
Technicalbid.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 18, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 27, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 4 days
Nov 27, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 4 days

Tender Documents

Download All (ZIP) ↓
html

3d180812-3e7b-4131-b726-044bd86c26a2.html

xls

BOQ_873591.xls

pdf

Technicalbid.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender