Educational and Research Institute Government Departments Closing in 18 days TDR #58591946

Tender For Renovation Of Toilets Of Buildings Of Auditorium Of Physics Department And Auditorium Of Mathematics Department In Panjab University Campus, Sector-14, Chandigarh.

Issued by Government Departments · Chandigarh, Chandigarh
Tender Value
22.36 Lakhs
Estimated cost
Bid Submission
09 Dec 2026
18 days left
EMD
45000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Chandigarh → Chandigarh
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Renovation Of Toilets Of Buildings Of Auditorium Of Physics Department And Auditorium Of Mathematics Department In Panjab University Campus, Sector-14, Chandigarh.

BOQ

Name of Work:- Renovation of Toilets of buildings of Auditorium of Physics Department and Auditorium of Mathematics Department in Panjab University Campus, Sector-14, Chandigarh.
Sl. No. Item Description
1Civil Work
2Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 5 km for all lifts, complete as per directions of Engineer-in-charge. (Ref:- 1.1.18)
3Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
41:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) (Ref:- 4.1.3)
5Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up to floor five level excluding cost of centering, shuttering, finishing and reinforcement
61:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size).(Ref:- 5.2.3)
7Centering and shuttering including strutting, propping etc. and removal of form for :
8Suspended floors, roofs, landings, balconies and access platform. (Ref:- 5.9.3)
9Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.
10TMT bar 10 mm dia (Ref:- 5.22.6)
11Providing and fixing 18mm thick gang saw cut mirror polished premoulded and prepolished) machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand)
12Granite of any colour and shade
13Area of slab upto 0.50 sqm (Ref:- 8.2.2.1)
14Extra for providing edge moulding to 18mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.
15Granite work. (Ref:- 8.3.2)
16Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
1712mm cement plaster of mix
181:6 (1 cement: 6 fine sand) (Ref:- 13.1.2)
19Distempering with oil bound washable distemper of approved brand and manufacture to give
20New work (two or more coats) over and including priming coat with cement primer. (Ref:- 13.41.1)
21Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.
221:4:8 or leaner mix (Ref:- 15.2.2)
23Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.
24In cement mortar (Ref:- 15.7.4)
25Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead:
26Of area 3 sq. metres and below (Ref:- 15.13.1)
27Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50metres lead. (Ref:- 15.25)
28Dismantling precast concrete or stone slabs in walls, partition walls etc. including stacking within 50 metres lead:
29Thickness up to 40mm (Ref:- 15.40.1)
30Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge :
3115 mm to 40 mm nominal bore (Ref:- 15.44.1)
32Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres (Ref:- 15.56)
33Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required :
34W.C. pan with ISI marked white solid plastic seat and lid (Ref:- 17.2.1)
35Providing and fixing white vitreous china flat black half stall urnial of size 580 x380x350mm with white PVC automatic flushing cistren, with fitting standrad size C.P. brass flush pipe , spreaderes with unions and clamps (all in C.P. brass) with waste fitting as per Is :2556, C.I trap with outlet grating and other couping in C.P. brass including painting of fittings and cutting and making good the walls and floors wherever required
36Single half stall urinal with 5 litre P.V.C automatic cistern (Ref:- 17.5.1)
37Providing and fixing toilet paper holder:
38C.P. Brass (Ref:- 17.34.1)
39Providing and fixing soil, waste and vent pipes
40100 mm dia.
41Sand cast iron S& S pipe as per IS: 3989 (Ref:- 17.35.1.2)
42Providing and fixing soil, waste and vent pipes
4375mm dia.
44Sand cast iron S& S pipe as per IS: 3989 (Ref:- 17.35.2.2)
45Providing and fixing plain bend of requried degree
46100 mm
47Sand cast iron S&S as per IS - 3989 (Ref:- 17.39.2.1)
48Providing and fixing single plain junction of requried degree
49100x100x100 mm dia
50Sand cast iron S&S as per IS - 3989 (Ref:- 17.44.1.1)
51Providing and fixing single plain junction of requried degree
5275x75x75 mm dia
53Sand cast iron S&S as per IS - 3989 (Ref:- 17.44.2)
54Providing and fixing collar:
55100 mm
56Sand cast iron S&S as per IS - 3989 (Ref:- 17.57.1.1)
57Providing and fixing collar:
5875 mm
59Sand cast iron S&S as per IS - 3989 (Ref:- 17.57.2.2)
60Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter:
61100mm dia (Ref:- 17.58.1)
62Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter:
6375mm dia (Ref:- 17.58.2)
64Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :
65100 mm inlet and 75 mm outlet
66Sand cast iron S&S as per IS - 3989 (Ref:- 17.60.2.1)
67Concealed pipe including painting with anti corrosive bitumastic paint, cutting chases and making good the wall
6815 mm dia nominal bore (Ref:- 18.11.1)
69Concealed pipe including painting with anti corrosive bitumastic paint, cutting chases and making good the wall
7020 mm dia nominal bore (Ref:- 18.11.2)
71Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.(external work):
7225 mm dia nominal bore (Ref:- 18.12.3)
73Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc.complete:
7425 to 40 mm Nominal bore (Ref:- 18.13.1)
75Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :
7620 mm nominal bore (Ref:- 18.17.1A)
77Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :
7825 mm dia bore (Ref:- 18.17.1)
79Providing and fixing unplasticised P.V.C. connection pipe with C.P. Brass Nuts collar and bush of approved quality and colour.make viking
8015 mm nominal bore with 45cm length. (Ref:- 18.21.2.1)
81Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required :
8215 mm nominal bore. (Ref:- 18.47.1)
83Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required :(Ref:- 18.47)
8420 mm nominal bore. (Ref:- 18.47.2)
85Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required
8625 mm dia bore (Ref:- 18.47.3)
87Providing and fixing C.P. brass stop cock (concealed) with caps including SS flange. Complete in all respect to the entire satisfaction of the engineer in-charge.
8815 mm nominal bore (Ref:- 18.52.1)
89Cutting holes up to 30x30 cm in walls including making good the same:
90With F.P.S. bricks (Ref:- 18.76.1)
91Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement and making necessary channels for the drain etc. complete :
92For pipes 100 to 250 mm diameter (Ref:- 19.21.1)
93Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and paneling to be paid for separately) :
94For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)
95Powder coated aluminium (minimum thickness of powder coating 50 micron) 10 guage(Ref:- 21.1.2.2)
96Providing and laying Brick work with F.P.S. bricks of class designation 100 (average compressive strength not less than 105 kg per sq.cm.) in Foundation and plinth in :
97Cement mortar 1:6(1 cement : 6 coarse sand)(Ref:- N.S.)
98Providing & laying P.C.C. 1:8:16 (1 Cement : 8 coarse sand: 16 coarse aggregate)with stone ballast 32mm guage in foundation and plinth. Complete in all respect to the entire satisfaction of the Engineer-in-charge.(Ref:- N.S.)
99Providing and laying Anti skid floor tiles of size 300x300mm of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete. (Ref:- N.S.)
100Providing and fixing 1st quality ceramic glazed wall tiles (300x600mm) conforming to IS: 15622 of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (Ref:- N.S.)
101Providing and fixing in position 15mm i/d C.P. Brass short body(460 gms weight) with S.S. flange bib cock, complete in all respect to the entire satisfaction of the engineer-in-charge.(Ref:- N.S.)
102Providing and fixing 15mm C.P. brass Angle cock and SS flange of approved quality. complete in all respect to the entire satisfaction of the engineer-in-charge. :(Ref:- N.S.)
103Providing and fixing in position 15mm dia CP Brass nipple(1\\" to 2\\" long) to various fittings. Complete in all respect to the entire satisfaction of the engineer-in-charge. (Ref:- N.S.)
104Providing and fixing Single socketed on wall face unplasticised Rigid UPVC pipe (10 kg per Sqcm pressure) of size 150mm dia conforming to IS : 13592 Type A, including jointing with necessary Tee and Bend conforming to IS : 5382, leaving 10 mm gap for thermal expansion. complete as per entire satisfaction of the Engineer-in-Charge.(Ref:- N.S.)
105Providing & Laying Half Brick masonry work with F.P.S. bricks of class designation 100 in superstructure above plinth level upto floor V level. complete in all respect to the satisfaction of the engineer in charge.
106Cement mortar 1:4 (1 cement :4 coarse sand)(Ref:- N.S.)
107Providing and fixing C.P. towel Ring complete with PVC rawl plug and CP Brass screws with concealed fittings of approved quality and colour.Complete in all respect to the entire satisfaction of the engineer-in-charge.(Ref:- N.S.)
108Providing and fixing 3mm thick bakelite sheet of approved brand by engineer-in-charge at site. The sheet is to be used in panelling work for aluminium door/winow/shutter and partition fixed in position with C.P. brass screw or EPDM gasket etc. Complete in all respect to the entire satisfaction of the engineer-in-charge.(Ref:- N.S.)
109Providing & fixing S.S Soap dish with necessary hardware. Complete in all respects as per entire satisfaction of the Engineer-in-Charge(Ref:- N.S.)
110Providing and fixing Jet connection alongwith 450mm long pipe for water closet. Complete in all respect to the entire satisfaction of the engineer-in-charge.(Ref:- N.S.)
111Providing and fixing C.P. Stainless steel fitting heavy duty ISI marked.
112Tower bolt 8\\" long(Ref:- N.S.)
113Providing and fixing C.P. Stainless steel fitting heavy duty ISI marked.
114Tower bolt 6\\" long(Ref:- N.S.)
115Providing and fixing C.P. Stainless steel fitting heavy duty ISI marked.
116Handle 5\\" D-type(Ref:- N.S.)
117Providing and fixing C.P. Stainless steel fitting heavy duty ISI marked.
118Hinges 5\\"(Ref:- N.S.)
119Providing and fixing Hydraulic door closer with logo printed along with necessary fittings. Complete in all respect to the entire satisfaction of the engineer in charge.(Ref:- N.S.)
120Providing and fixing 32mm dia G.I. waste pipe along with elbow or bend. complete in all respect to the entire satisfaction of the engineer-in-charge.(Ref:- N.S.)
121Providing and fixing 5mm thick mirror to be fixed with 4mm thk. hard board & 8mm thk. Ply at back of hard board & all round to be finished with PVC/wood designer 2\\"x1 1/2\\" moulding. Complete in all respects as per entire satisfaction of the Engineer-in-Charge. (Ref:- N.S.)
122Removal of chinaware water closet with fittings. Complete in all respect to the entire satisfaction of the engineer-in-charge.
123Removal of Chinaware Wash basin with fittings .Complete in all respect to the entire satisfaction of the engineer in charge.(Ref:- N.S.)
124Providing and fixing C.P. Brass Bottle Trap for Wash basin and sink.(Ref:- N.S.)
125Bottle trap 32 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal.(Ref:- N.S.)
126Providing & fixing Wash basin of size 550x400mm for under counter slab including the centre hole mixer of size 15mm dia of approved make complete in all respect to the entire satisfaction of the engineer-in-charge. (Ref:- N.S.)
127Providing & fixing chinaware urinal partition of standard size with approved screws. Complete in all respects to the entire satisfaction of the engineer-in-charge. (Ref:- N.S.)
128Electrical works
129Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS/HFFR PVC insulated copper conductor single core cable etc. as required
130Group C (Ref:- 1.8.3)
131Supplying and drawing following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required
1323 x 2.5 sq. mm (Ref:- 1.17.12)
1333 x 4 sq. mm(Ref:- 1.17.21)
134Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required
13525 mm (Ref:- 1.21)
136Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required
1375/6 amps switch (Ref:- 1.23.1)
1383 pin 5/6 A socket outlet (Ref:- 1.23.4)
139Supplying and fixing metal box of 150mm X 75mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 A socket outlet and 5/6 A piano type switch, connections, painting etc. as required(Ref:- 1.29)
140Supplying and fixing metal box of 180mm X 100mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 & 15/16 A socket outlet and 15/16 A piano type switch, connections, painting etc. as required(Ref:- 1.3)
141Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.(Ref:- 1.33)
142Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required
143Single pole (Ref:- 2.10.1)
144LED Batten light (System lumen efficacy ≥105 <120 lm/Watt). (Ref:- 8.9)
145Supplying, Installation, Testing & Commissioning of LED surface mounted Batten light of following body material and construction as per IS : 10322 with driver (Replaceable) as per the requirement with Driver efficiency >85%, Operating voltage AC 140/ 270 Volt, frequency 50/60 hz, Operating temp range -5 °C to 40 °C, internal surge protection of 2.5 KVwith Short & Open circuit protection, THD < 10%, P.F.≥0.95, IP20, CRI >80, Flicker free, (flicker should be below 5 %), life time (LED, Driver & electrical circuitry), of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Colour Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 <120 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-inCharge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). Powder coated die cast /Extruded aluminium Body (Thickness > 1.20 mm)
14618-22 Watt(Ref:- 8.9.1)
147Supply, installation, testing & commissioning of 63 Amp MCB TPN, 10kA, 'C' curve in the existing distribution board, complete in all respect to the entire satisfaction of engineer in-charge. (Ref:- N.S.)
148Supply and Erection of Exhaust Fan (Copper wound metallic body) following size complete with motor, metallic blades, double ball bearing with minimum power consumption, rigid frame with rubber mounting for silent operation, epoxy powder coating along with metallic louver. The job includes carriage charges, connection, testing, commissioning etc as required to complete the job to the entire satisfaction of the Engineer-in-charge.
149300MM Sweep with louver.(Ref:- N.S.) Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58591946
AUTHORITY Government Departments
TENDER VALUE 22.36 Lakhs
LAST DATE 09-12-2026
Authority
Authority Name Panjab University
Work Description Tender for Renovation Of Toilets Of Buildings Of Auditorium Of Physics Department And Auditorium Of Mathematics Department In Panjab University Campus, Sector-14, Chandigarh.
Basic Detail
Tender No 6921/EE/Mtc.
Bidding Type Tender
Location
City Chandigarh
State Chandigarh
Key Dates
Publish Date 18 Nov 2026
Submission Date 09 Dec 2026
Open Date 10 Dec 2026
Finance
Tender Value 22.36 Lakhs
Tender Fee Ref. Documents
EMD 45000
Exemption Not Available
Document List
BOQ_119334.xls
fb8b5644-d061-44ce-a900-df1c28f0cece.html
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 18, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 09, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 18 days
Dec 10, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 19 days

Tender Documents

Download All (ZIP) ↓
xls

BOQ_119334.xls

html

fb8b5644-d061-44ce-a900-df1c28f0cece.html

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender