Tender For Repair/Renovation Of Store Room And Repair Of Floor Tiles In The Administrative Office And Committee Room Of The Department Of Evening Studies-Multi Disciplinary Research Centre(Des Mdrc) In P.U. Campus Sector-14 Chandigarh.
Tender Overview
Project Description
Tender for Repair/Renovation Of Store Room And Repair Of Floor Tiles In The Administrative Office And Committee Room Of The Department Of Evening Studies-Multi Disciplinary Research Centre(Des Mdrc) In P.U. Campus Sector-14 Chandigarh.
BOQ
| Sl. No. | Item Description |
| 1 | Civil Works |
| 2 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). (Ref:- 5.3) |
| 3 | Centering and shuttering including strutting, propping etc. and removal of form for : |
| 4 | Shelves (cast in situ) ( Sheleve) (Ref:- 5.9.4) |
| 5 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. |
| 6 | Thermo- Mechanically Treated bars (Ref:- 5.22.6) |
| 7 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints. |
| 8 | Size of Tile 600x600 mm (Ref:- 11.47.2) |
| 9 | Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and shade, laid with cement based high polymer modified quick set tile adhesive (water conforming to IS:15622, of approved brand & manufacturer, in all colours and based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). |
| 10 | Size of Tile 600x600 mm (Ref:- 11.49.2) |
| 11 | 10 cm thick (average) mud phaska of damped brick earth on roofs laid to slope consolidated and plastered with 25 mm thick mud mortar mixed with bhusa at 35 kg per cum of earth and gobri leaping with mix 1:1 (1 clay : 1 cow dung) and covered with flat tile bricks of class designation 100 grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement and finished neat : |
| 12 | With F.P.S. brick tiles (non- modular) of class designation 10 (Ref:- 12.16.1) |
| 13 | Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design. |
| 14 | In 75x75mm deep chase (Ref:- 12.21.1) |
| 15 | Making khurras 45x45 cm with average minimum thickness of 5cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1mx1mx400micron, finished with 12mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement rounding the edge sand making and finishing the outlet complete. (Ref:- 12.22) |
| 16 | 15 mm cement plaster on the rough side of single or half brick wall of mix |
| 17 | 1:6 (1cement : 6 fine sand ) (Ref:- 13.2.1) |
| 18 | Pointing on brick work or brick flooring with cement mortar 1:3 (1 cement : 3 fine sand): |
| 19 | Flush / Ruled/ Struck or weathered pointing (Ref:- 13.31.1) |
| 20 | Distempring with oil bound washable distemper of approved brand and manufacture to give an even shade |
| 21 | New work (two or more coats) over and including water tinnable priming coat with cement primer (Ref:- 13.41.1) |
| 22 | Finishing walls with Acrylic Smooth exterior paint of required shade : |
| 23 | New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) (Ref:- 13.46.1) |
| 24 | Providing and applying white cement based putty of average thickness 1 mm of approved brand manufacturer over the plastered wall sufrace to prepare the surface even and smooth complete. (Ref:- 13.80) |
| 25 | Removing white or color wash by scrapping and sand papering the surface smooth including necessary repairs to scratches etc complete (Ref:- 13.88) |
| 26 | Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade |
| 27 | Old Work (one or more coats) (Ref:- 13.90.1) |
| 28 | Providing and fixing APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3mm thick water proofing membrance black finished reinforced with glass fibre matt consisting of a cost of bitumen primer for bitumen membrance @ 0.40 litre/ sqm by the same membrence manufacture of density at 25 c. 0.87 -0.89 kg / Litre and viscosity 70 -160 cps. over the primer coat layer of membrane shall be laid using butane touch and sealling all joints etc. and preparing the surface complete . The vital physical aand chemical parametres of the membrane shall be as under : joints strength longitudinal and transverse directon at 23°c as 350/300N/ 5cm Tear strength in longitudinal and transverse direction as 60/80N . Softening point of membrane not less than 150°c Cold flexibility shall be up to -2 c when tested in accordance with ASTM D -5147 . The laying of membrene shall be got done through the authorised applicator of the manufacture of membrene . |
| 29 | 3mm thick (Ref:- 14.90.1) |
| 30 | Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of: |
| 31 | G.S. Sheet (Ref:- 15.28.1) |
| 32 | 20 mm cement plaster of mix : with water proof compound:1:4 (1 cement: 4 coarse sand) (Ref:- N.S.) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender