Tender For Cleaning Of All Ugr Tanks And Refilling Of Fire Extinguisher And Other Allied Works In Various Non Residential Building At Sector-10, 16, 17 And 24, Chandigarh (Under maintenance Booth Sector-16, Chandigarh ). (Ch To : 2215 (N.P.) Nrb )
Tender Overview
Project Description
Tender for Cleaning Of All Ugr Tanks And Refilling Of Fire Extinguisher And Other Allied Works In Various Non Residential Building At Sector-10, 16, 17 And 24, Chandigarh (Under maintenance Booth Sector-16, Chandigarh ). (Ch To : 2215 (N.P.) Nrb )
BOQ
| Sl. No. | Item Description |
| 1 | Cleaning of under ground sump, Over Head R.C.C. Tank ( independent staging) including disposal of slit and rubbish, all as per direction of Engineer-in-Charge. The cleaning shall consist following operations:-DSR 14.78 |
| 2 | (i)Tank shall be emptied of water by pumping & bottom shall be cleaned of silt and other deposits. |
| 3 | (ii) Entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with water. |
| 4 | (iii) Chlorination of RCC internal surface by liquid chlorine. |
| 5 | (iv) The treated surface shall be dried using air jetting and all loose particles shall be removal from the surface. |
| 6 | (v) Finally the surface shall be treated with ultraviolet radiation etc.as per direction of Engineer-in-Charge. |
| 7 | Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level up to floor V level in all shapes and sizes in : DSR 6.4 |
| 8 | Cement mortar 1:4 (1 cement : 4 coarse sand) DSR 6.4.1 |
| 9 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. DSR 12.50 |
| 10 | 12 mm cement plaster finished with a floating coat of neat cement of mix :DSR 13.7 |
| 11 | 1:3 (1 cement: 3 fine sand) DSR 13.7.1 |
| 12 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required DSR 10.25 |
| 13 | In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works DSR 10.25.2 |
| 14 | Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required.DSR 27.22 |
| 15 | Refiling of fire Extinguisher A,B,C (Dry chemical Powder) Type of capicity 5 kg as per ISI standard job includes to & from carriage to filling station |
| 16 | Refiling of fire Extinguisher A,B,C (Dry chemical Powder) Type of capacity 6 kg as per ISI standard job includes to & from carriage to filling station |
| 17 | Refiling of fire Extinguisher DCP, (Dry Powder) Type of capacity 5 kg as per ISI standard job includes to & from carriage to filling station |
| 18 | Refiling of fire Extinguisher CO2, Type of capacity 4.5 kg as per ISI standard job includes to & from carriage to filling station |
| 19 | Refiling of fire Extinguisher CO2, Type of capacity 9 kg as per ISI standard job includes to & from carriage to filling station |
| 20 | Replacement of cartage of fire Extinguisher complete in all respect |
| 21 | Replacement of fire Extinguisher pipe complete in all respect |
| 22 | Replacement of ABC valve for cylinder as per site requirement complete in all respect to entire satisfaction of EIC. |
| 23 | Providing and fixing of Pressure Guage for cylinder as per site requirement complete in All respect to entire satisfaction of EIC Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender