Tender For Construction Of Barrack, At:-Ddc Confidential Office Campus, Gumla, Dist- Gumla
Tender Value
34.54 Lakhs
Estimated cost
Bid Submission
23 Nov 2026
4 days left
EMD
69100
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gumla → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Barrack, At:-Ddc Confidential Office Campus, Gumla, Dist- Gumla
BOQ
| Sl. No. | Item Description |
| 1 | CIVIL WORKS |
| 2 | Earth work in excavation of foundation trenches in ordinary soil (vide classification of soil item -A ) and disposal of excavated earth as obtained to a distance up to 50 M. including all lift , leveling ramming the foundation trenches , removing roots of trees, shrubs all complete as per approved design, building specification and direction of E/I |
| 3 | Extra for earth work in hard soil (vide classification of soil –B) all complete as per specification and direction of E/l. |
| 4 | Filling in foundation trenches and plinth in layers not exceeding 150mm thick well-watered, rammed, fully compacted and fine dressed with earth obtained after cutting within a lead of 50M and lift of 1.5M all complete job as per specification and direction of E/I |
| 5 | Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials, labour, royalty and taxes all complete as per building specification and direction of E/l. (Mode of measurement compacted volume) |
| 6 | Providing brick flat soling in foundation, joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/I |
| 7 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All work up to plinth level 1:3:6 (1 cement: 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size) |
| 8 | Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level 1:1.5:3 (1 cement :1.5 coarse sand (zone-iii) :3 graded stone aggregate 20mm nominal size) |
| 9 | Reinforcement cement concrete work in wall (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level 1:1.5:3 (1 cement :1.5 coarse sand (zone-iii) :3 graded stone aggregate 20mm nominal size) |
| 10 | Reinforcement cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases. above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level 1:1.5:3 (1 cement :1.5 coarse sand (zone-iii) :3 graded stone aggregate 20mm nominal size) |
| 11 | providing Tor steel reinforcement of 8mm dia rods as per approved design and drawing exclusive carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I |
| 12 | Providing Tor steel reinforcement of 8mm dia rods as per approved design & drawing (TMT Fe 500 only valid for SAIL & TATA Steel) |
| 13 | Providing Tor steel reinforcement of 10mm dia rods as per approved design & drawing (TMT Fe 500 only valid for SAIL & TATA Steel) |
| 14 | Providing Tor steel reinforcement of 12 to 20 mm dia rods as per approved design & drawing (TMT Fe 500 only valid for SAIL & TATA Steel) |
| 15 | Providing and fixing fan hook of 16mm dia M.S. bar 1 meter long bent to required size and shape placed in position and fixed in R.C.C slab/beam at the time of casting all complete as per building specification and direction of E/l. (where material is not supplied by dept.) |
| 16 | Providing cantering and shuttering including strutting propping etc. and its removal after use in foundation work as per specification and direction of E/I |
| 17 | Foundations, footings, bases for columns, etc for mass concrete |
| 18 | Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 19 | Column suspended floors, roofs, landings, balconies and access platform |
| 20 | Suspended floors, roof, landings, balconies and access platform |
| 21 | Weather shade, Chajjas, corbels etc., including edges |
| 22 | Providing designation 100 A brick work with fly ash lime brick (FLAG) confirming to IS 12894-1990 (9\\"x4.5\\"x3\\") in C.M. (1:4) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/I. |
| 23 | Providing designation 100 A brick work with fly ash lime brick (FLAG) confirming to IS 12894-1990 (9\\"x4.5\\"x3\\") in C.M. (1:4) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/I |
| 24 | Supplying, fitting and fixing good quality, well dressed and well-seasoned sal wood work in chaukhat in doors, windows skylights, fanlights and C/W celetial windows openings, including wedge over all clamps complete including application of two coats of wood preservative of approved quality on the surface butting walls and lintels all completeas per building specification and direction of E/I. |
| 25 | Supplying, fitting and fixing 35mm thick solid core type decorative double leaf flush door shutter with both sides decorative veneered with black board core bended with high quality phenol formal dehydes synthetic resine of standard make with Aluminium fittings such as hinges, towerbolts, handle, cleat and sand blocks and taxes all complete as per building specification and direction of E/I. |
| 26 | Supplying, fitting and fixing MS grill made of 20x6mm MS flat as per approved design and drawing properly fabricated with joints continuous fillet welded and finished smooth, carriage of grill to work site hoisting as per building specification and direction of E/l. (where materials is not supplied by the dept.) |
| 27 | Supplying, fitting and fixing collapsible gate of approved size and make properly fabricated with vertical double channels 20x10x2mm at 100mm centers and braced with M.S. flat diagonals 20x3mm with top and bottom rails of T. iron 40x40x6mm with 38mm dia steel pulleys complete with bolts, nuts, locking arrangements, stoppers, handles, including applying a priming coat of red lead paint, carriage, hoisting and taxes all complete as per building specification and direction of E/l. |
| 28 | For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) |
| 29 | Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 30 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 4.0 mm thickness (weight not less than 10 kg/ sqm) |
| 31 | Providing and fixing bright finished brass 100 mm mortice latch and lock, ISI marked, with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS: 1868) aluminium lever handles of approved quality with necessary screws etc. complete |
| 32 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. |
| 33 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. |
| 34 | Supplying fitting and fixing PVC/aluminum door frame taxes all complete as per building specification and direction of E/l. |
| 35 | Supplying fitting and fixing PVC/ aluminum door shutter. do.. taxes all complete as per building specification and direction of E/l.30 mm thick pre laminated PVC door shutters |
| 36 | Providing 12mm thick cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water scaffolding taxes and royalty all complete as per building specification and direction of E/l. |
| 37 | Providing 6mm thick cement plaster (1:4) in ceiling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water scaffolding taxes and royalty all complete as per building specification and direction of E/l |
| 38 | Providing and laying Double charge vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 / ISO 13006 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm |
| 39 | Providing and laying rectified glazed ceramic floor tiles 300x300m or more (thickness to be specified by manufacture) of 1st quality conforming to IS:15622 with approved make in colours white, ivory, grey, fume red, brown laid on 20mm thick cement mortar (1:4) including pointing the joints with white cement and matching pigments, etc all complete. – Antiskid Ceramic tiles |
| 40 | Providing and laying 6 mm thick precast white glazed tiles in wall over 12 mm cement mortar (1:3) and jointed with grey cement slurry flush pointed with white cement including rubbing, polishing and cost of curing taxes and royalty all complete as per building specification and direction of E/I |
| 41 | Providing and applying white cement-based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete |
| 42 | Providing two coats of snowcem paint of approved shade and make over a coat of cement primer on new surface including preparing the plastered surface smooth with sand paper scaffolding curing and taxes all complete as per building specification and direction of E/l. |
| 43 | Providing two coats of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface thoroughly specification and taxes all complete as per building specification and direction of E/l. |
| 44 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement :3 coarse sand: 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand including finishing the top smooth |
| 45 | Carriage of Materials: - |
| 46 | i) Bricks (10.00 Km) |
| 47 | ii) Sand (lead 20.00 Km) |
| 48 | iii) Stone Chips lead 10.00 KM |
| 49 | iv) Stone Metal lead 10.00 KM |
| 50 | v) Cement +Steel lead 2.00KM |
| 51 | Estimate for Electrical Work |
| 52 | Wiring for light point / fan point / call bell point/with 1.5 Sq.mm F.R.P.V.C. insulated copper conductor cable in surface/ recessed PVC conduit as required with piano type switch phenolic laminated sheet MS box earthing the point PVC insulated copper with 1.5 Sq mm FR PVC insulated copper conductor single core cable etc. as required Group A |
| 53 | Wiring for light power plug wiring with 2x4 Sq. mm. PVC insulated copper conductor single core cable in surface /recessed PVC conduit along with 1 no 4 Sq mm FR PVC insulated copper conductor single core cable for loop earthing as required. |
| 54 | wiring for circuit / sub main wiring along with earth wire with the following sizes of P.V.C. insulated copper conductor single core cable in surface / recessed PVC conduit as required |
| 55 | 2 x 1.5 sq mm + 1 x 1.5sq mm earth wire |
| 56 | 2 x 2.5 sq mm + 1 x 2.5sq mm earth wire |
| 57 | 2 x 6 sq mm + 1 x6sq mm earth wire |
| 58 | Supplying and fixing PVC/GI Box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required 75 mm x 75mm x 50 mm deep |
| 59 | Supplying and fixing following piano type switch/ socket on the existing switch box / cover including connection etc as required |
| 60 | 5/6 Amps switch |
| 61 | 5/6 Amps socket outlet |
| 62 | 15/16 Amps switch |
| 63 | 6pin15/16 socket outlet |
| 64 | Supplying and fixing Suitable size G.I. box on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing5 ping 5/6 & 5/6 Amps socket outlet and 15/16 amps piano type switch , connection, painting etc as required |
| 65 | Supplying and fixing (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 ping 5/6 & 15/16 Amps socket outlet and 15/16 amps piano type switch , connection, painting etc as required |
| 66 | Supplying and fixing of following sizes of PVC conduit along with the accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required |
| 67 | 20mm dia |
| 68 | 25mm dia |
| 69 | S/F Batten/ angle holder including connection etc as required |
| 70 | Supplying and fixing of following way single pole & natural sheet steel. MCB distribution board 240volts , on surface /recess, complete with tinned copper bush bars, natural link, earth bar, din bar, detachable gland plate , interconnection, phosphatized and powder painted including earthling etc. as required etc. ( but without MCB/RCCB / .ISOLATOR) 4 WAY |
| 71 | Supplying and fixing 6 Amps to 32 Amps rating, 240 volts, 'B' series miniature circuit breaker suitable for lighting and other loads of following poles in the existing MCB DB complete with connection, testing and commissioning etc. as required. |
| 72 | 6/32 single pole |
| 73 | 40amps single pole |
| 74 | Supplying and fixing 20amps 240 volts SPN industrial type socket outlet with 2pole and earth metal enclosed plug top along with 20amps C-series .SP MCB in sheet steel enclosure, on surface or in recess with chained metal cover for the socket outlet and complete. etc required |
| 75 | Supplying and fixing 40amps 240 volts TPN industrial type socket outlet with 4pole and earth metal enclosed plug top along with 20amps C-series. TP MCB DB in sheet steel enclosure, on surface or in recess with chained metal cover for the socket outlet and complete. etc required |
| 76 | Annexure (B) Fitting and Fixing |
| 77 | Supplying and fixing of holder type 15/16-watt LED Bulb |
| 78 | Supplying fitting and fixing of 1200mm Ceiling fan |
| 79 | Supplying fitting and fixing of 300mm exaust fan |
| 80 | Supplying fitting and fixing of 60-watt LED Street Light |
| 81 | PHE Work and Water Supply |
| 82 | Supplying, fitting and fixing 40 mm high vitreous white glazed earthen ware I.W.C. of parry Hindustan or any other I.S.S approved make with 100mm H.C.I 'p' trap 15 litres C.I pull and let go flushing cistern of names or other I.S.S equivalent make complete with all fitting C.I of C.C brackets 32mm alkathene/PVC telescopic flush, pipe about 2 M long with one brass coupling and clamps G.I chain and pul including supplying and fixing a pair of vitreous white glazed earthen ware footrest to be fixed in floor 15mm C.I body brass spindle stop cock of weight not less than 50gms, 15mm PVC connection pipe 450mm long and the exposed, all complete as per specification and direction of E/l. © 450mm long IWC with 10lit. PVC Cistern |
| 83 | Supplying fitting and fixing vitreous white glazed earthen ware wash hand basin of parry of Hindustan or any other ISS approved make supported on painted C.I or R.S. brackets 32mm C.I brass waste 15mm dia C.I body brass spindle stop cock of approved quality of weight not less than 350grms, 32mm PVC waste pipe 750mm long with brass coupling |
| 84 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes (a) 110 mm dia |
| 85 | Water Supply work |
| 86 | providing and fixing chlorinated polyvinyl chloride (CPVC) pipes, having thermal stability for hot & cold-water supply including all CPVC plain & brass threaded fittings i.E. fixing the pipe with clamps at 1Mtr. Spacing this includes jointing of the pipes & fitting with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of E/I |
| 87 | i) 15 mm dia nominal bore G.I pipe |
| 88 | ii) 20 mm dia nominal bore G.I pipe |
| 89 | iii) 25 mm dia nominal bore G.I pipe |
| 90 | Providing and fixing male ended 15mm dia brass bib cock of approved quality (wt not less than 350gms) with extra socket. all complete as per specification and direction of E/l. |
| 91 | Providing and fixing brass stop cock of approved quality all complete as per specification and direction of E/l.(15mm dia) |
| 92 | Providing and fixing 15mm size CP brass pillar cock (wt not less than 350gms) CI body brass spindle pillar cock of approved quality all complete as per specification and direction of E/l.(15mm dia |
| 93 | Earth work in excavation for laying of different types and sizes of RCC spun pipes with disposal of excavated earth with in initial lead and lift as per specification and direction of E/l |
| 94 | labour for laying, fitting and fixing NP2 RCC spun pipe with collars in lines level and grade and providing approved jointing materials and joints properly filled to make them lead proof including providing sight rails boning rod night guard Red light and barrier etc all complete as per specification and direction of E/l.100mmdia rcc pipe |
| 95 | Cost of Water Storage Tank |
| 96 | providing and fixing chlorinated polyvinyl chloride (CPVC) pipes, having thermal stability for hot & cold-water supply including all CPVC plain & brass threaded fittings i.E. fixing the pipe with clamps at 1Mtr. Spacing this includes jointing of the pipes & fitting with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of E/I 25 mm dia nominal bore PVC pipe |
| 97 | Cost of septic tank and sock pit |
| 98 | Earth work in excavation of foundation trenches in ordinary soil ( vide classification of soil item -A ) and disposal of excavated earth as obtained to a distance up to 50 M. including all lift , leveling ramming the foundation trenches , removing roots of trees, shrubs all complete as per approved design, building specification and direction of E/I |
| 99 | Providing coarse clean sand filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150 mm thick all leads and lift including cost of all materials, labour. royalty and taxes all complete as per building specification and direction of E/I |
| 100 | providing brick flat soling in foundation , joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/I |
| 101 | Providing P.C.C. M-150 with nominal mix of (1:2:4)in foundation with approved quality of stone chips (20 mm to 6 mm size)clean coarse sand of F.M.2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position , vibrating, striking, curing, taxes, and royalty all complete as per specification and direction of E/I |
| 102 | Providing designation 75 A brick in C.M.(1:6) in foundation and plinth with approved quality of clean sand of F.M 2 to 2.5 including providing 10 mm thick mortar joints , cost of screening materials raking out joints to 15 mm depth , curing , taxes and royalty all complete as per building specification and direction of E/I |
| 103 | Providing 12 mm thick cement plaster in C.M. (1:3) with clean coarse sand of F.M 1.5 with 5% cico any other approved water proofing compound including screening, curing with all lead and lift of water ,scaffolding taxes and royalty all complete as per building specification and direction of E/I |
| 104 | Providing R.C.C. M-200 with nominal mix of ( 1:1.5:3) in roof slab with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position , vibrating, striking, curing, ( but excluding the cost of reinforcement) taxes, and royalty all complete as per specification and direction of E/I |
| 105 | Providing R.C.C. M-200 with nominal mix of ( 1:1.5:3) in lintel with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position , vibrating, striking, curing, ( but excluding the cost of reinforcement) taxes, and royalty all complete as per specification and direction of E/I |
| 106 | providing T.M.T. Reinforcement of following dia bar as per approved design and drawing excluding carriage of M.S. bars to work site , cutting, bending, and binding with annealed wire with cost of wire removal of rust placing the rod in position all complete as per building specification and direction of E/I |
| 107 | 500 mm diameter C.I. cover (medium duty) the weight of the cover to be not less than 58 kg |
| 108 | Providing cantering and shuttering including strutting propping etc. and its removal after use in foundation work as per specification and direction of E/I |
| 109 | Carriage of Materials::- |
| 110 | i) Bricks (10Km) |
| 111 | ii) Sand (lead 20Km) |
| 112 | iii) Stone Chips (lead 25 KM) |
| 113 | iv) Cement+ M.S. rods (lead 15 KM) |
| 114 | Construction of Sock Pit |
| 115 | GST @18% |
| 116 | LABOURCESS @1% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysNov 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender