Tender For Renovation Of Hostel Including Toilet, Floor, Window, Kitchen, Roof, Fan And Electrical Work At Residential Boys Hostel, Hatinghore, Bano Simdega.
Tender Value
98.29 Lakhs
Estimated cost
Bid Submission
25 Nov 2026
6 days left
EMD
1.96 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Simdega → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation Of Hostel Including Toilet, Floor, Window, Kitchen, Roof, Fan And Electrical Work At Residential Boys Hostel, Hatinghore, Bano Simdega.
BOQ
| Sl. No. | Item Description |
| 1 | Providing 19mm thick water proof cement plaster (1:3) with clean coarse sand of F.M. 1.5 with 5% cico or any other approved water proofing compound including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. |
| 2 | Providing 12mm thk. Cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per building specification and direction of E/I. |
| 3 | Providing 6mm thk. Cement plaster (1:4) in ceiling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water,scaffolding, taxes and royalty all complete as per builing specification and direction of E/I. |
| 4 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4(1 cement : 4 coarse sand) :25 mm thick |
| 5 | Providing and laying Doublecharge vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 / ISO 13006 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm . |
| 6 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 7 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: 13.47.1 New work (Two or more coats applied @ 1.43 Itr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over and including priming coat of exterior primer applied @2.20kg10sqm. |
| 8 | Providing two coats of oil bound distemper of approved shade and make over a coat of cement primer over new surface including preparing the plastered surface by the rubbing smooth with pumice stone or fine sand paper applying putty wherever required scaffolding washing of floors and taxes all complete as per building specification and direction of E/l. |
| 9 | Providing two coat of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface throughly , scaffolding and taxes all after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I. |
| 10 | Dismantling old plaster and pointing in cement or lime and raking out joints to 15mm depth, watering and disposal of unserviceable materials with all leads all complete as per direction of E/l. |
| 11 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete |
| 12 | Providing 250mm wide brick drain in cement mortar(1:6) with av.150mm. clear depth and 250mm. apron including cost of earthwork- involved with 75mm. cement concrete (1:4:3) over one brick designation 75A,flat soling in proper grade and slope at the base,the drain duly plastered in C.M. (1:3) with punning over exposed surface all complete as per building specification and direction of E/l. |
| 13 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. |
| 14 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. |
| 15 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type .A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. |
| 16 | 110 mm |
| 17 | 110 mm Bend |
| 18 | 110 mm Shoe |
| 19 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. |
| 20 | 110 mm |
| 21 | Wiring for light point/ fan point/exhaust fan point / call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit, with modular switch ,modular plate, suitable GI box and earthing the point with 1.5sq mm FR PVC insulated copper conductor single core cable etc as required. .Group B |
| 22 | Wiring for circuit / sub main wiring alongwith earth wire with the following sizes of PVC insulated, copper conductor , single core cable in surface/ recessed PVC coduit as required. 2X1.5 sq mm +1 x 1.5sq mm earth wire. |
| 23 | S/F light plug point with modular type accessories -Supplying and fixing suitable size G.I. box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin, 5/6 ampsmodular socket outlet and 5/6 amps modular type switch connection, painting etc. as required. |
| 24 | Suppling and fixing following moduler type switch / socket on the existing switch box / cover including connection etc. as reqd. 5/6 amps switch |
| 25 | 5/6 amps socket |
| 26 | S/F Modular type electronic fan regulator :-Supplying and fixing stepped type fan regulator on the existing modular plate switch box including connections but excluding modular plate etc asrequired. |
| 27 | S/F Ceiling Rose :- |
| 28 | S/F Batten holder -Supplying and fixing batten/angle holder including connection etc. as required. |
| 29 | Supply, fitting, fixing and testing of 1200mm Sweep, double ball-bearing, 2 canopy ceiling fan including connection with 1.5 sq mm copper wire, down rod all accessories as required. |
| 30 | Supplying and fixing single wall mounted 18/22 watt LED type batten fitting complete with electronic driver and LED tube etc directly on wall/ ceiling including connections with 1.5 sq.mm FR PVC insulated copper conductor and earthing the body etc. as required. |
| 31 | 15/16 Watt LED Bulb |
| 32 | ITC exhaust fan |
| 33 | Copper earth plate electrode. |
| 34 | S/L 8 SWG copper wire |
| 35 | S/F 'C' series MCB :- Supplying and fixing 240 volts, 'C' series, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc, as required.6/32A SINGLE POLE MCB |
| 36 | Supplying fitting and fixing vitreous white glazed earthen ware wash hand basin of parry or Hindustan or any other I.S.S. Approved make supported on painted C.I. Or R.S. Bracket 32mm C.I. Brass waste, 15 mm dia C.I. Body brass spindle stop cock of approved quality of weight not less than 350 grams, 32mm P.V.C. waste pipe 750mm longwith brass coupling at one end and making plunber joints etc. all complete as per specification and direction of E/l. |
| 37 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :Kitchen sink without drain board :610×510 mm bowl depth 200 mm |
| 38 | Polythene water storage tank of mark with cover and suitable lockings ystem in double layer confirming to IS :120701-1996 with latest revision. |
| 39 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. |
| 40 | 25 mm nominal dia Pipes |
| 41 | 32 mm nominal dia Pipes |
| 42 | 40 mm nominal dia Pipes |
| 43 | Mirrors of 6mm thick plate glass bevelled edge mirror including C.P. Brass revolving fitting 3mm ply wood board and C.P. Hinges to fix with mirror.(i) 600mm X 450mm size |
| 44 | Supplying, fitting, and fixing M.S. Grill made of 20X6mm M.S. Flate as per approved design and drawing, properlyfabricated with joints continuous fillet welded and finished smooth, carriage of grill to work site, hoisting as per building specification and direction of E/l. (where materials is not supplied by the deptt.) |
| 45 | Providing 150mm wide brick drain in cement mortar(1:6) with av.150mm. clear depth and 125mm. apron including cost of earthwork- involved with 75mm. cement concrete (1:4:3) over one brick designation 75A,flat soling in proper grade and slope at the base,the drain duly plastered in C.M. (1:3) with punning over exposed surface all complete as per building specification and direction of E/l. |
| 46 | Supplying, fitting and fixing good quality, well dressed and well seasoned sal wood work in chaukhat in doors,windows skylights, fanlights and C/W celetial windows openings, including wedge over all clamps complete including application of two coats of wood preservative of approved quality on the surface butting walls and lintels all completeas per building specification and direction of E/1. |
| 47 | Supplying, fitting and fixing 32mm, thick good quality well dressed and well seasoned local wood battenedshutters ledged and braced in doors and windows with oxidised iron fittings such as hinges, sliding door, bolts,tower bolts, handled or rings, hooks and eyes, cleats, sand blocks as per schedule, taxes and royalty all complete as per building specification and direction of E/I. |
| 48 | Taking down old door and window shutters including stacking serviceable materials within 15M,. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/l. |
| 49 | Taking down chaukhats in doors including stacking serviceable materials within 15M,. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/l. |
| 50 | Taking sown chaukhats in windows including stacking serviceable materials within 15M,. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/l. |
| 51 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. |
| 52 | 75 mm dia |
| 53 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type .A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. |
| 54 | Single TEE with door -75x75x75mm |
| 55 | Single TEE with door -110x110x110mm |
| 56 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold watersupply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. Thisincludes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and makinggood the same including testing of joints complete as per direction of Engineer in Charge. Concealed work,including cutting chases and making good the walls etc. |
| 57 | 15mm dia pipe |
| 58 | 20mm dia pipe |
| 59 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings,including fixing the pipe with clam at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. |
| 60 | 25 mm nominal dia Pipes |
| 61 | 32 mm nominal dia Pipes |
| 62 | Supplying and fittingthe following item complete with all compere as per specification and directon of E/l. |
| 63 | CP TOWEL RING |
| 64 | c.p brass soap container medium quality with screw andhinges etc |
| 65 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast iron P or S trap, 10 litre low level white P.V.C. Flushing cistern with munally controlled device (handle lever) conforming to IS:7231 Parryware/ Hindware with all fittings and fixtures complete including cutting and making good the walls and floors wherever required. White Vitreous China Orissa pattern W C pan of size 580 X 440 mm with integral type foot rest. |
| 66 | Providing and fixing male ended 15mm dia C.P. brass bib cock of approved quality (wt not less than 350 gms) with extra socket all compere as per specification and directon of E/I.conforming to IS 8931 |
| 67 | Providing and fixing N.P /C.P Brass / pvc procelain shower rose of 15mm inlet etc. all compere as per specification and directon of E/l |
| 68 | shower rose |
| 69 | Providing and fixing 15mm size pillar cock c.i body brass spindle pillar cock of approved quality as perspecification and directon of E/l |
| 70 | Providing and fixing brass/ c.i stop cock of of approved quality as per specification and directon of E/I15mm dia |
| 71 | Providing and fixing G.M non return valve horizontal/ vertical type of approved quality as per specification anddirecton of E/I |
| 72 | horizontal-25mm dia |
| 73 | vertical-32mm dia |
| 74 | making hole in wall for laying G.I pipe and restoring the same after pipe laying asper specification and directon ofE/I. |
| 75 | 125mm thick wall |
| 76 | 250mm thick wall |
| 77 | Power plug wiring in PVC conduit (2 x 4 sq.mm) - Wiring for light/power plug with 2 x 4 sq.mm. FR PVC insulated copper conductor single core cable for loop earthing as required. |
| 78 | S/F power plug point with Modular type accessories -Supplying and fixing suitable size G.I. box with modular plate cover in front on surface or in recess including providing and fixing 6 pin, 15/16 amps modular socket outlet and 15/16 amps modular switch connection, painting etc. as required. |
| 79 | 9/10 Watt LED Bulb |
| 80 | Supply for LD STREET Light(45/48) |
| 81 | Supplying 12\\" (300mm) metal exhaust fan |
| 82 | Earthwork in excavation in foundation trenches in ordinary soil ( vide classification of soil item -A) and disposal of excavated earth as obtained to a distance upto 50 M including all ifts. levelling,ramming the foundation trenches, removing roots of trees, shurbs all complete as per approved design, building specification and direction of E/l. |
| 83 | Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including' cost of all materials, labour, royalty and taxes all complete as per building specification and direction of E/l (Mode of measurement complacted volume). |
| 84 | Providing designation 75B one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/l. |
| 85 | Providing and laying in position cement concrete of spetified grade excludiag the cost of centering and shuttering - All work up to plinth level: 1:2:4 (1 Cement : 2 coarse sand (zone-IIl) : 4 graded stone aggregate 40 mm nominal size) |
| 86 | Centering and shuttering including strutting, propping etc. and removal of form for |
| 87 | Foundations, footings, bases of columns, etc. for mass concreteFOUNDATION |
| 88 | Providing random rubble stone masonry in C.M. ( 1:4 ) in foundation and plinth with hammer dressed stone of less than 0.03 M3 in volume and clean coarse sand of F.M. 2 to 2.5 including cost of screening, raking out joints to 20 mm depth, curing, taxes and royalty all complete as per buildingspecification and direction of E/l. |
| 89 | Providing random rubble stone masonry in C.M. ( 1:6) in Superstructure with hammer dressed stone of less than 0.03 M3 in volume and clean coarse sand of F.M. 2 to 2.5 including cost of screening, raking out joints to 20 mm depth, curing, taxes and royalty all complete as per buildingspecification and direction of E/l. |
| 90 | Supplying and laying boulders in rock toe, heel trenches of the dam as per design, drawing including the cost of materials and royalty etc. but excluding the cost of carriage all complete as per specificatins and direction of E/l. |
| 91 | Filling in foundation trenches and plinth in layers not exceeding 150 mm thick well watered, rammed, fully compacted and fine dressed with earth oblained after cutting within a lead of 50 M and lift of 1:5 Mal complete as per building specification and direction of E/ (Mode of measurement compacted volume). |
| 92 | Providing designation 75 B brick work in C.M.(1 :6) insuperstructure with approved quality of clean coarsesand of F.M. 2 to2.5 including providing 10 mm thickmortar joints cost of screening materials , scafolding,raking out joints to 15mm depth curing. taxes and royaltyall complete as per building specification and direction ofE/I. |
| 93 | Providing two coat of snowcem of approved shade and make over a coat of cement primer on new surface including preparing the plas- tered surface smooth with sand paper, scaffolding, curing and taxes all complete as per building specification and direction of E/l. |
| 94 | Supplying at site Angle iron post & strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia. etc. complete.size of (50×75×6mm). |
| 95 | Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metreopenable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron 'Y' shaped placed 2.4 m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately). |
| 96 | Filling in foundation trenches and plinth in layers not exceeding 150mm thick well watered, rammed, fully compacted and fine dressed with earth obtained from excavation of foundation trenches within a lead of 50Mand lift of 1.5M all complete as per building specification and direction of E/I. (mode of measurement compacted volume) |
| 97 | Providing and laying factory made chamfered edge Cement Concretepaver blocks in footpath, parks, lawns, drive ways or light trafficparking etc, of required strength, thickness & size/ shape, made bytable vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. 80 mm thick C.C. paver block of M-30 grade with approved color design and pattern. |
| 98 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). |
| 99 | Carriage of Materials |
| 100 | Sand (8Km) |
| 101 | Chips (22Km) |
| 102 | Brick (7+1)Km |
| 103 | Boulder (20Km) |
| 104 | Add 18 % GST (in Basic Rate must fill 12) |
| 105 | Add 1% Labour Cess (in Basic Rate must fill 1) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysNov 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender