Tender For Restoration Of Rain Damages To Lwss Tourkhola And Multi Villages In Tehsil Dharampur Distt. Mandi Hp (Sh:- Construction of Anchor Blocks For Rising Main And Gravity Main At Various Rds) Under Pdna
Tender Value
9.64 Lakhs
Estimated cost
Bid Submission
28 Nov 2026
6 days left
EMD
19290
Bank guarantee accepted
Document Fee
350
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mandi → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Restoration Of Rain Damages To Lwss Tourkhola And Multi Villages In Tehsil Dharampur Distt. Mandi Hp (Sh:- Construction of Anchor Blocks For Rising Main And Gravity Main At Various Rds) Under Pdna
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in foundation, trenches etc. in all kinds of soil such as pick work, jumper work, blasting work in soft / hard rock, chiselling in soft / hard including wedging out of a rock where blasting is prohibited and stacking the excavated earth up to all lifts, stacking the excavated soil up to all lead clear from the edge of excavation and then returniing the stacked soil in 15 centimeters layers when required in to plinths, sides of foundation etc. consolidating each deposited layer by ramming and waterng and then disposing of all surplus excavated earth as per direction and to the entire satisfation of Engineer- in- charge up to leads and lifts. |
| 2 | Providing and laying cement concrete 1:4:8 (1 cement: 4 sand: 8 graded crushed stone agg. 40mm nominal size) and curing complete excluding cost of form work in foundation and plinth as per direction and to the entire satisfaction of Engineer-in-Charge. |
| 3 | Providing & laying cement concrete 1:3:6 (1cement : 3 sand : 6 graded stone aggregate 40 mm nominal size) excluding the cost of centring & shuttering in Foundation & plinth. |
| 4 | Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement: 6 coarse sand: 12 graded stone aggregate 20 mm nominal size) upto plinth level with: Cement mortar 1:6 (1 cement: 6 coarse sand) |
| 5 | Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x 5mm so as to give a fair finish including centring, shuttering strutting and propping etc. with wooden batten and ballies, in all heights of propping and centring below supporting floor to ceiling not exceeding 4 mtrs and removal of the same for insitu-reinforced concrete and plain concrete work in :- |
| 6 | Flat surface such as soffits of suspended floors, roofs, landing and the like floor etc. up to 200 milimetres in thickness including all leads and lifts as per the direction of Engineer-in-Charge. (Septic Tank Slab) |
| 7 | Vertical surfaces such as wall (any thickness) partitions and the like including attached pillasters, buttresses plinth and string courses and the like in all leads and lifts as per direction and to the entire satisfaction of Engineer-in-charge. |
| 8 | Providing and laying cement concrete 1:1.5:3 (1 cement: 1.5 sand: 3 graded crushed stone agg. 20mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in:- |
| 9 | Suspended floors roofs, landings and shelves and their supports, balconies, beams, girders, bressumers and cantilevers upto floor two level. as per direction and to the entire satisfaction of Engineer-in-Charge. |
| 10 | Providing laying of Tor steel reinforcement for RCC work including bending binding and placing in position including wire upto all floor level as per direction and to the entire satisfaction of Engineer-in-Charge. |
| 11 | Brick work using common burnt clay building bricks 2nd classin super structure above plinth level upto floor two level in cement mortar 1:4 (1 cement :4 sand) including curing complete as per direction and to the entire satisfaction of Engineer-in-charge |
| 12 | 15mm thick cement plaster in single coat on rough side of brick /stone /concrete walls for interior plastering upto floor two level I/c arrises, internal rounded angles, chambers and/or rounded angles not exceeding 80mm in girth and finished even and smooth in cement mortar1:4 (1 cement :4 sand) |
| 13 | 6 millimeters thick plaster to ceiling in cement mortar 1:3(One cement isto Three sand) in all floors up to all heights and levels, as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges |
| 14 | Applying Birla white wall care putty over plaster surface after throughly brushing the surface free from mortar drops, dust, loose material & other foreign matter as per direction and to the entire satisfaciton of Engineer-in-charge upto all lead and lift. |
| 15 | Wall painting (two coats) with acrylic emulsion paint of approved brand and manufacture for interior grade on undecorated concrete/stone/plastered wall surfaces to give an even shade including t horoughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty a required for metling |
| 16 | Providing and fixing on ventilating pipe unplasticised Rigid PVC pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110mm |
| 17 | Providing and Fixing 110mm dia PVC Cowl |
| 18 | Providing and fixing vitreous china wash down water closet (European type W.C. Pan) with integral 'P' or 'S' trap including jointing the trap with soil pipe in cement mortar 1:1 (1 cement: 1 sand) (seat and cover to be measured and paid for separately) |
| 19 | Ordinary Closet one piece Asian Paint make |
| 20 | Providing and fixing plastic seat (Solid/Hollow type) cover for wash down water closet with C.P. Brass hinges rubber buffers |
| 21 | Providing and fixing vitreous china wash basin with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fittings., (i) Flat back 630mm x 450mm Asian Paint Make |
| 22 | Providing and fixing C.P. Brass Pillar taps with capson head |
| 23 | Providing and fixing C.P. brass angle valve 15mm without Nuts and pipe |
| 24 | Providing and fixing Toilet paper holder: CP Brass |
| 25 | Providing 40x3 mm flat iron hold fast 40cm. Long including fixing to frame with 10mm diameter bolts & nuts and wooden plugs and embeding in cement concrete block 30x10x15cm. 1:3:6 (1 cement: 3 sand: 6 gradedstone aggregate 20mm nominal size) |
| 26 | Providing and fixing alluminium frames of doors, windows, clerestory, windows and other frames wrought, framed and fixed in position. |
| 27 | Providing and fixing alluminium and glazed shutters for doors windows and clerestory windows. Including black enamelled iron butt hinges with necessary screws |
| 28 | Providing and fixing aluminum tower bolts (barrel type) anodized transparent or dyed to required shade and colour with screws etc. complete. 250x10mm |
| 29 | Providing and fixing anodized aluminum sliding door bolt anodized colour and shade with bolts and nuts screws etc. complete. 250x16mm |
| 30 | Providing and fixing aluminum handles anodized transparent or dyed to required shade and colour with screws etc. complete. 125mm |
| 31 | Providing & Fixing to wall, ceiling & floor, galvanised milt steel tubes (Heavy Class), tube fittings & clamps i/c making good the wall, ceiling & floor. |
| 32 | 20mm dia Nominal Bore TATA Make |
| 33 | 15mm dia Nominal Bore TATA Make |
| 34 | Providing and fixing PVC water storage tank of ISI: 12701 marked, G.I. inlet and outlet connection, 15mm nominal bore ball valve and mosquito proof PVC cover with lockingarrangement including hoisting up to all heights above ground level:- 500 litres net capacity tank |
| 35 | Providing & laying 60mm thick interlocking paver block in Grey cement and under layers of sand 0.125mm average thick complete in all leads and lift and to the entire satisfication of the Engineer-in-charge. |
| 36 | Providing and fixing of 15 watt street light (Reputed make) with inbuilt 20000 Mah. Battery and white Luminor 60 watt solar panel poly crystal with 5 meter GI Pole and all supporting structure including all taxes, installation & freights etc complete as per direction and to the entire sastisfaction of Engineer-in-Charge. |
| 37 | Providing & supplying of GI Union conforming to IS 1239 Part II 2011 make of following dia complete in all respect as per direction and to the entire satisfactioln of Engineer-in-Charge. |
| 38 | 15 mm dia |
| 39 | 20 mm dia |
| 40 | 25 mm dia |
| 41 | 32 mm dia |
| 42 | 40 mm dia |
| 43 | 50 mm dia |
| 44 | 65 mm dia |
| 45 | Providing & supplying of GI Socket conforming to IS 1239-2 (2011) of UNIK make of following dia complete in all respect as per direction and to the entire satisfactioln of Engineer-in-Charge. |
| 46 | 15 mm dia |
| 47 | 20 mm dia |
| 48 | 25 mm dia |
| 49 | 32 mm dia |
| 50 | 40 mm dia |
| 51 | 50 mm dia |
| 52 | 65 mm dia |
| 53 | Providing and supplying of copper alloy and of following dia as per ISI Marked of reputed make BIR/Kartar complete in all respect in all leads and lifts as per the direction of Engineer-in-Charge. |
| 54 | 15 mm dia |
| 55 | 20mm dia |
| 56 | 25 mm dia |
| 57 | 32 mm dia |
| 58 | 40 mm dia |
| 59 | 50 mm dia |
| 60 | 65 mm dia |
| 61 | Providing and fixing cast iron Sluice Valves PN 1.0 of different dias of make of Vir/Kartar etc with hand wheel complete in all respect. |
| 62 | 80 mm dia |
| 63 | Providing and fixing S.F.R.C. man hole cover internal dia 500mm (Medium duty) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysNov 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender