Tender For Restoration Of Rain Damages Of Lwss Mata Hateshwari In G.P Saraswati Nagar Tehsil Jubbal Distt. Shimla (H.P) (Sh: Laying, Jointing Of G.I Pipes And Butt Welding & Repair Of Nrv And Sluice Valves) (Estimated Cost:- 4,89,423 /-, Earnest Mone
Tender Overview
Project Description
Tender for Restoration Of Rain Damages Of Lwss Mata Hateshwari In G.P Saraswati Nagar Tehsil Jubbal Distt. Shimla (H.P) (Sh: Laying, Jointing Of G.I Pipes And Butt Welding & Repair Of Nrv And Sluice Valves) (Estimated Cost:- 4,89,423 /-, Earnest Money Rs:- 9,890 /- Time:- 6 Months.)
BOQ
| Sl. No. | Item Description |
| 1 | Removal of slips in all kinds of soil( including saturated soil but excluding boulders & rock protion req. belasting) up to a distance of 20mtrs. Disposing unserviceable material and neatly dressing the surface.with in all leads and lifts as directed by the Engineer-in-charge. |
| 2 | Excavation in foundations , trenches etc., in earth work , lift up to 1.50 metres. Stacking the eacavated soil not more than 3 metres clear from the edge of the excavation and then returning the stacked soil in 15 cm. (fifteen centimetres) layers , when required in to plinth and sides of foundations etc., conslolidating each of the disposited layer by ramming and watering and then disposing off all excavated soil as directed with in the load of 20 mtrs. Pick and Jumper work etc. complete as per the direction of the Engineer - in - Charge. |
| 3 | Laying, butt welding and testing of ISI marked steel tubes plain ended in trenches of following dia as per IS 1239-2001, including jointing the pipes with butt welding at both the ends according to relevant BIS standards/approved specifications including manufacturing reducers/tapers, all short pices and bends as per site requirement and made from parent tubes ( to be measurer and paid alongwith pipes. Bends shall be manufactured in such a way that not more than 111/4 degree deflection is caused by a single cut and internal dia is not reduced including hydraulic testing to the entire satisfaction of Engineer-in-charge. The damaged portion of galvanization due welding shall be provided with anticorrosive treatment by providing two coats of bituminous paint over priming coat as per AWWA specification C-203-1978. (Earth work to be measure & paid for separately). |
| 4 | 50 mm dia (Light Class) |
| 5 | 40 mm dia (Light Class) |
| 6 | Butt welding as per relevent BIS specification (Leak proof) including cost of carriage of welding set, bends tail price, tees reducers increasers as per site requirements and as per the sirection of Engineer in Charge. Earth work in trenches to be measured and paid separately including all leads and lifts and carriage of material at site. |
| 7 | 80 mm dia. |
| 8 | 65 mm dia. |
| 9 | 50 mm dia. |
| 10 | 40 mm dia. |
| 11 | Providing and fixing of copper alloy wheel valve (Heavy Duty) ISI marked with in all leads and lifts as per direction of Engineer-in-Charge. |
| 12 | 50 mm dia. |
| 13 | 40 mm dia. |
| 14 | 32 mm dia. |
| 15 | 25 mm dia. |
| 16 | 20 mm dia. |
| 17 | Repair of Cast steel non return valve of following dia with in all leads and lifts and entire satisfection of Engineer in Charge. |
| 18 | 50 mm dia NRV (Leader make) |
| 19 | 40 mm dia NRV (PELICAN make) |
| 20 | 50 mm dia with handle CL 900 WCB (PELICAN make) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender