Housing Urban and Rular Development Government Departments Closing in 13 days TDR #58589988

Tender For Development Of Childrens Play Area Including Installation Of Outdoor Gym Equipment And Other Allied Recreational Facilities At Nagoa Beach, Diu

Issued by Government Departments · Diu, Daman and Diu
Tender Value
1.59 Crore
Estimated cost
Bid Submission
02 Dec 2026
13 days left
EMD
3.19 Lakhs
Bank guarantee accepted
Document Fee
1500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Diu → Daman and Diu
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Development Of Childrens Play Area Including Installation Of Outdoor Gym Equipment And Other Allied Recreational Facilities At Nagoa Beach, Diu

BOQ

Name of Work:- Development of Childrens Play area including Installation of Outdoor Gym Equipment and other allied Recreational Facilities at Nagoa Beach, Diu
Sl. No. Item Description
1Works
2EXCAVATION upto 1.50 Metre for foundation such as footing, pedestals, walls, drains, columns, ramps, plinth beams, cable trenches in Dense or Hard soil MECHANICALLY but other than hard rock including shoring, strutting, sorting out and stacking useful material, dewatering where required, cutting vegetation up to 1.5m ht if required and disposing off the excavated stuff upto all lead and lift. Note- All types of soil that can be removed by JCB/ Poclain bucket shall be classified under this item.
3EXCAVATION 1.50 to 3.00 Metre for foundation such as footing, pedestals, walls, drains, columns, ramps, plinth beams, cable trenches in Hard Murrum MECHANICALLY but other than hard rock including shoring, strutting, sorting out and stacking useful material, dewatering where required, and disposing off the excavated stuff upto all lead and lift.
4FILLING with selected & approved available excavated earth (excluding rock) in excavated pits, trenches, in plinth, sub-base for of roads, drains, manhole, sumps, or where required with approved locally available materials including spreading in layers not exceeding 200mm, watering, ramming, compacting mechanically using 2 ton compactor etc, complete. Measurements for net volume of space occupied by filling. If desired by the engineer-in-charge the contractor shall at his own expense carry out modified proctor compaction test to determine the maximum dry density. The criteria for acceptance of filling shall be compacting to 95% modified Proctor density with use of mechanical roller/rammer etc complete as directed and instructed by Engineer-in-charge. Volume of material filled to be measured for payment.
5FILLING with selected & approved Murrum material brought by Contractor from outside client's premises, including Identification of Borrow pits and including Royalty charges & or duties as per requirement of local authority, in foundations, excavated pits, trenches, in plinth, sub-base for of roads, drains, manhole, sumps, or where required with approved locally available materials including spreading in layers not exceeding 200mm, watering, ramming, compacting mechanically using 2 ton compactor etc, complete. Measurements for net volume of space occupied by filling. If desired by the engineer-in-charge the contractor shall at his own expense carry out modified proctor compaction test to determine the maximum dry density. The criteria for acceptance of filling shall be compacting to 95% modified Proctor density with use of mechanical roller/rammer etc complete as directed and instructed by Engineer-in-charge. Volume of material filled to be measured for payment.
6Providing and laying RUBBLE SOLING wherever required in foundation and plinth including hand packing fillings interstices with chips and sand. Watering and compacting to consolidated thickness, etc complete as directed by engineer-in-charge
7Providing and laying PLAIN CEMENT CONCRETE 1:2:4 (1- Cement : 2- Coarse sand : 4- graded stone aggregates 20 mm nominal size) in foundations and superstructure including, machine mixing, leveling compacting, curing and formwork if any, scaffolding, staging etc. complete as directed and instructed by Engineer-in-Charge. Volume of PCC laid to be measured for payment.
8Providing material and labour for laying machine mixed/machine batched/RMC controlled cement concrete M.300 using graded black trap stone aggregates of maximum 20mm nominal (down graded) size including fine aggregate confirming to IS 383 with minimum cement content as per IS456 (without flyash) for durability shall be followed as per approved design mix & latest IS456 for reinforced cement conrete work for all elements,all floors,all heights/depths, any lead and lift including cost of formwork with sheathing steel or form finish ply shuttering , scaffolding, staging, vibrating, compacting, finishing and curing complete but excluding cost of reinforcement for reinforced concrete work in Foundations, footings, Base of columns and Mass concrete, as directions of Engineer in charge Complete.Preliminary cubes to be prepared on award of work and to be tested to meet the specified requirement for M30 mix, design mix to be approved by the Engineer-in-charge/Architect. Concrete placing shall be done with utmost care, the free drop height shall not exceed 1.5m, and concrete shall be vibrated with immersion type vibrators having frequency not less than 7000 vibrations per second in methodical method so as all points of structures are covered. Free concrete surface shall be covered with Hessian cloth and kept wet.
9Providing material and labour for laying machine mixed/machine batched/RMC controlled cement concrete M.300 using graded black trap stone aggregates of maximum 20mm nominal (down graded) size including fine aggregate confirming to IS 383 with minimum cement content as per IS456 (without flyash) for durability shall be followed as per approved design mix & latest IS456 for reinforced cement conrete work for all elements,all floors,all heights/depths, any lead and lift including cost of formwork with sheathing steel or form finish ply shuttering , scaffolding, staging, vibrating, compacting, finishing and curing complete but excluding cost of reinforcement for reinforced concrete work in Columns, Pillars posts and struts etc complete as directed by Engineer-incharge. Preliminary cubes to be prepared on award of work and to be tested to meet the specified requirement for M30 mix, design mix to be approved by the Engineer-in-charge/Architect. Concrete placing shall be done with utmost care, the free drop height shall not exceed 1.5m, and concrete shall be vibrated with immersion type vibrators having frequency not less than 7000 vibrations per second in methodical method so as all points of structures are covered. Free concrete surface shall be covered with Hessian cloth and kept wet.
10Providing material and labour for laying machine mixed/machine batched/RMC controlled cement concrete M.300 using graded black trap stone aggregates of maximum 20mm nominal (down graded) size including fine aggregate confirming to IS 383 with minimum cement content as per IS456 (without flyash) for durability shall be followed as per approved design mix & latest IS456 for reinforced cement conrete work for all elements,all floors,all heights/depths, any lead and lift including cost of formwork with sheathing steel or form finish ply shuttering , scaffolding, staging, vibrating, compacting, finishing and curing complete but excluding cost of reinforcement for reinforced concrete work in Lintels, Beams, Girders and Cantilever etc complete as directed by Engineer-incharge.Preliminary cubes to be prepared on award of work and to be tested to meet the specified requirement for M30 mix, design mix to be approved by the Engineer-in-charge/Architect. Concrete placing shall be done with utmost care, the free drop height shall not exceed 1.5m, and concrete shall be vibrated with immersion type vibrators having frequency not less than 7000 vibrations per second in methodical method so as all points of structures are covered. Free concrete surface shall be covered with Hessian cloth and kept wet.
11Providing material and labour for laying machine mixed/machine batched/RMC controlled cement concrete M.300 using graded black trap stone aggregates of maximum 20mm nominal (down graded) size including fine aggregate confirming to IS 383 with minimum cement content as per IS456 (without flyash) for durability shall be followed as per approved design mix & latest IS456 for reinforced cement conrete work for all elements,all floors,all heights/depths, any lead and lift including cost of formwork with sheathing steel or form finish ply shuttering , scaffolding, staging, vibrating, compacting, finishing and curing complete but excluding cost of reinforcement for reinforced concrete work in Slabs, landing, shelves and Cantilever etc complete as directed by Engineer-incharge.Preliminary cubes to be prepared on award of work and to be tested to meet the specified requirement for M30 mix, design mix to be approved by the Engineer-in-charge/Architect. Concrete placing shall be done with utmost care, the free drop height shall not exceed 1.5m, and concrete shall be vibrated with immersion type vibrators having frequency not less than 7000 vibrations per second in methodical method so as all points of structures are covered. Free concrete surface shall be covered with Hessian cloth and kept wet.
12Providing, laying and fixing in position REINFORCEMENT High yield deformed bars TMT/ FE550D for All R.C.C. works at all levels including cutting, bending and binding with 16 gauge M.S. annealed wire, providing cover blocks of C.M. 1:2 Embedded with binding wire etc. complete. The reinforcement detailing to IS 456 or, if specified by engineer, shall conform to IS: 13920 (Ductile detailing of R. C. Structures), bars as per IS 1786 the rate shall be inclusive of executing such detailing. Laps to be measured shall be as shown in drawing and for reinforcement length longer than available in market. Chairs, pins and laps other than that specified shall not on be measured and paid for. No extra to be paid for height, rate remains same at all levels, complete as per drawings, specification, direction of engineer-incharge. Make: TATA, SAIL, JSW or Primary Steel.
13Providing fusion bonded Epoxy coating not less than 175 micron thickness and up to 300 micron to reinforcement bars as per IS- 13620-1993/ASTM-775 M including testing of coating at plant and all taxes as directions of chief engineer in charge Complete. (A) 8mm to 32mm dia bar
14Providing material and labour for Galvanized Iron (GI) Steel structural work (Conforming to IS 4923-1997) , riveted, bolted or welded in built-up sections for all types of framed work, including cutting, hoisting, fixing in position, complete with hot-dip galvanized coating and necessary touch-up treatment at damaged surfaces, all complete as per structural designs and directions of the Engineer-in-Charge.
15Providing & fixing White stone Bela masonry Block in course in super structure with stone of approved guality in Cement Mortar 1:5 (1-Cement : 5- course sand) including Racking the joints etc. complete
16Providing and laying 20mm thick SANDFACED CEMENT PLASTER of required grain finishing upto all height/all floors including grooves, pattas etc. in two coats having the the base coat of not less than 12 mm thickness in CM 1:3 (1-cement : 3-sand) & finished coat 8 mm thk, in CM 1:1 (1-cement : 1-sand) to external surfaces of concrete & masonry including hacking of concrete surfaces, racking of joints, scaffolding, curing, providing chicken mesh at all necessary joints, etc. complete. Rate shall include addition of “Impermo” water proofing compound or equivalent as approved by engineer-in-charge, providing, adding & mixing of fine fibrillated 100% virgin polypropylene fibers in cement mortar to form homogeneous mixture @125 gms per a bag of cement in both the coats of plaster, 12mm long fibers shall be used in first coat & 6mm long fibers shall be used in second finished coat. providing drip mould 40mm wide and 12mm thick in cement mortar 1:3 on soffit of chajjas, canopies, gutters etc.complete. as directions of Engineer in charge Complete.The surfaces to be plastered to be hacked immediately on de-shuttering. The Brick/ RCC surface to be plastered to be cured sufficiently before start of plaster. Initial bare surface area to be Plastered shall be measured for payment unless noted otherwise, etc as directions of Engineer in charge Complete.
17Providing material and labor for applying Two coats of acrylic putty upto 2mm thickness for getting undulation free surface and accurate plumbness in walls. including providing grooves as per architectural drawings at all the edges of windows/Doors with neat finish on new/existing wall surface Work includes surface cleaning, removal of loose particles, minor leveling, and application of putty in one or more coats to accurately achieve the required thickness. After proper curing, the surface will be sanded to a smooth, even finish suitable for painting. Thickness will be checked for accuracy throughout the application to ensure compliance with project specifications.
18Providing and applying two coat of primer and two coats of Texture paint, Anti-fungal, water proof, dust proof Paint on Exterior Surfaces in any pattern, at all heights of surfaces. One component waterborne 100% pure acrylic emulsion that offers protection against concrete carbonation with an R Value of min 600m and an equivalent concrete layer thickness value of min 150cm. Paint should have crack bridging property of min 1.85 mm with Solar Reflective index of min 110 and IR reflectance property. The product shall have a Volume Solids of minimum 35%The product shall be independently tested and approved for properties alike Carbon Dioxide Diffusion resistance, resistance to chloride diffusion, crack bridging and liquid water/ vapour transmission as well as SRI properties. The product can be like Jotashield WaterXtreme Topcoat of Jotun Paints or approved equivalents.Two Coats of above paint should be applied using a conventional Roller / Airless spray at the site after application and curing of applied Primer.including cleaning, preparing the surface, applying primer - scraping by sandpaper, scaffolding etc. including - (a) All surface preparation, suitable number of base coats required, primers and suitable finishing to the complete satisfaction of the Engineer in Charge, (b) Scaffolding and all leads and lifts,(c) Proper curing in between the two subsequent coats, (d) Touch ups to the paint after the scaffolding is removed, (e) All measurements for paints to be as per IS-1200. f) Minimum Guarantee of Ten Years Waterproofing and Paint performance for all external paints by manufacturer .For measurement of painting items the area painted shall be considered without any multiplication factor for different kinds of surfaces painted. Rate shall be quoted accordingly. All painting items final finish shall be as per manufacturer'sspecification as per acceptance of Engineer in charge /Architect. No extra payment shall be made for extra/over coat if required.Make - Asian Paint Ultima Allura Torino, Jotun Jotashield Tex Fine OR Equivalent.
19Providing and fixing Wood Plastic Composite (WPC) non-slip decking flooring of approved make, color, and shade, having thickness 20-25 mm, width 135–150 mm, with grooved / anti-skid surface finish, UV stabilized, waterproof, termite and weather resistant.The work includes providing and fixing aluminium substructure framework made of extruded aluminium sections of minimum size 25x25 mm (or equivalent) with minimum 1.5 mm thickness, fixed over prepared base using suitable anchor fasteners/rawl plugs at spacing not exceeding 300–400 mm center to center, properly aligned, leveled, and ensuring required slope for drainage.The WPC decking boards shall be fixed over the aluminium framework using stainless steel (SS 304) screws and concealed/hidden clip system, including starter clips, locking clips, fasteners, and all necessary fixing accessories.The item includes:-Surface preparation, cleaning, and leveling of base-Providing minimum slope of 1:100 for proper drainage-Fabrication and fixing of aluminium framework-Cutting, fitting, and fixing of WPC deck boards-Providing and maintaining expansion gaps of 5–8 mm-Fixing of edge trims, corner trims, and end caps-All materials, labour, tools & plants, scaffolding (if required)-Loading/unloading, transportation, wastage, and incidental chargesComplete work as per drawings, specifications, and direction of Engineer-in-Charge.
20Providing, supplying, fabricating and fixing PVC coated fabric of approved make and quality, made out of high-strength polyester base fabric with double-sided PVC coating, complete as required for use in canopies, awnings, tensile structures, covers, shades, or similar applications.The fabric shall be waterproof, UV-stabilized, weather-resistant, and fungus-resistant, having adequate tensile and tear strength, conforming to relevant standards and specifications as approved by the Engineer-in-Charge.The work shall include cutting to required sizes, stitching/heat sealing of joints, edge reinforcement with suitable tapes, and providing rust-proof eyelets, ropes, clamps, or other necessary fittings/accessories for proper fixing in position, complete.The fabric shall be fixed in position with required supports/fixtures (if applicable), ensuring proper tension, alignment, and finishing, all complete as directed by the Engineer-in-Charge.
21Providing, supplying and fixing multi-colour polycarbonate sheet of 3 mm thickness, UV-coated sheets of approved make and quality, suitable for roofing, cladding, canopies, skylights, partitions, or similar applications, complete as per direction of the Engineer-in-Charge.The polycarbonate sheet shall be of high impact-resistant material, UV-stabilized, weather-resistant, and light transmitting, with uniform thickness and smooth finish. The sheets shall be available in approved multi-colour shades (transparent/translucent/opal/tinted as specified).The work shall include cutting the sheets to required size, drilling, and fixing with suitable self-drilling screws, aluminium/gi profiles, EPDM/neoprene rubber gaskets, washers, and sealants, ensuring proper alignment, slope, and watertight installation.All joints shall be properly sealed, and the sheets shall be fixed with adequate overlap as per manufacturer’s specifications to prevent leakage and ensure durability.
22Providing, fabricating, supplying, and installing wooden gym equipment set of approved design and specifications, suitable for outdoor use (Beach spaces), complete in all respects.The equipment shall be manufactured using high-quality hardwood timber (such as Coconut wood, or equivalent approved wood), well-seasoned (air-seasoned/kiln-dried), straight, sound, and free from cracks, warping, and defects. All wooden members shall be properly dressed, planed, and treated with approved preservative for protection against termites, borers, decay, and moisture.The overall size of the equipment shall be approximately 2.0 m × 2.0 m × 2.5 m height, or as per approved drawings.The work shall include providing structural wooden members of required sizes, along with necessary mild steel/stainless steel components such as shafts, bearings, bolts, nuts, washers, brackets, and joints for smooth and safe operation of equipment. All metal components shall be corrosion-resistant and suitable for outdoor conditions.The equipment shall be ergonomically designed and fabricated for safe usage, including items such as pull-up bars, balance beams, climbing frames, sit-up benches, or similar fitness equipment as per approved drawings. All edges shall be rounded and smooth, ensuring user safety.The surface shall be finished with approved weather-resistant polish/paint/coating suitable for outdoor exposure, including UV and moisture resistance. The work shall also include foundation/anchoring arrangement in concrete or suitable base to ensure stability and durability.The rate shall be inclusive of cost of all materials, labour, fabrication, transportation, loading/unloading, erection, installation, finishing, hardware, tools and tackles, scaffolding, wastage, and all incidental charges required to complete the work as per specifications and directions of the Engineer-in-Charge.
23Providing, fabricating, supplying, and installing playground equipment for Kids Play Area using high-quality Wood Plastic Composite (WPC) sections of approved grade and design, suitable for outdoor use in parks, playgrounds, beaches, spaces, complete in all respects.The WPC sections shall be UV-stabilized, waterproof, termite-proof, splinter-free, and resistant to weathering, moisture, and decay. The material shall be of uniform quality, free from cracks, bends, and manufacturing defects, and suitable for structural and non-structural applications in play equipment.The work shall include providing WPC structural members of required sizes such as posts, beams, decks, platforms, railings, ladders, and cladding panels as per approved drawings and design. The equipment shall also include necessary accessories such as stainless steel (SS 304/316) bolts, nuts, washers, brackets, clamps, and connectors for proper assembly and safe installation.The equipment may include play components such as slides, climbing frames, tunnels, swings, platforms, and guard rails as per approved layout. All edges shall be smooth, rounded, and safe for children to prevent injury.The installation shall include proper fixing over RCC foundation or steel base frame with suitable anchoring system to ensure stability, safety, and durability under outdoor environmental conditions.The surface finish shall be as per manufacturer’s specification, requiring no additional painting, with natural WPC finish or as approved.The rate shall be inclusive of cost of all materials, labour, fabrication, transportation, loading/unloading, erection, installation, hardware, tools and tackles, scaffolding, wastage, and all incidental charges required to complete the work in all respects as per specifications and directions of the Engineer-in-Charge.
24Providing, fabricating, supplying and installing kids playground equipment for play area made from high-quality, well-seasoned hardwood timber (such as coconut wood) of approved design, size and configuration, suitable for outdoor use, including all play components such as slides, swings, climbing frames, platforms, ladders and balancing structures, using timber free from defects and treated with anti-termite, anti-fungal and weather-resistant preservatives; complete with all necessary galvanized or stainless steel hardware, chains, connectors and fasteners, properly anchored in cement concrete foundations for stability and safety, finished with smooth surfaces, rounded edges and coated with non-toxic, child-safe paint or polish of approved colour, including all materials, labour, tools, transportation, installation and finishing, complete in all respects as per drawings and directions of the Engineer-in-charge.
25Providing, fabricating, supplying, and installing benches for seating made from WPC (Wood Plastic Composite) and suitable for outdoor use in parks, gardens, beaches, and public spaces, complete in all respects, Size (1.5m L x 0.4m W x 0.63m H).The bench shall be of approved design consisting of seat and backrest (or without backrest as specified), supported on sturdy legs and frame structure. The wooden components shall be well-seasoned (air-seasoned/kiln-dried), straight grained, sound, and free from cracks, warping, knots, and defects affecting strength and durability. WPC components shall be UV-stabilized, water-resistant, termite-proof, splinter-free, and suitable for outdoor exposure.The structure shall include necessary supporting members and reinforcement using mild steel (MS) or stainless steel (SS) sections as required, including bolts, nuts, washers, brackets, and fasteners for proper assembly and long-lasting stability. All metal components shall be corrosion-resistant and suitable for outdoor conditions.The seating surface shall be properly finished, smooth, and rounded at edges for safety and comfort. Wooden components shall be treated with approved preservative and finished with weather-resistant polish/PU coating, while WPC components shall be maintenance-free with natural finish.The work shall include providing and fixing suitable foundation and anchoring arrangement in concrete or approved base to ensure stability and durability under outdoor conditions.The rate shall be inclusive of cost of all materials, labour, fabrication, transportation, loading/unloading, erection, installation, finishing, hardware, tools and tackles, scaffolding, wastage, and all incidental charges required to complete the work in all respects as per drawings, specifications, and directions of the Engineer-in-Charge.
26Supply, installation, testing and commissioning of ZIP LINE system of approx. 54 m span from the 12.7 m zip line tower to landing point, comprising galvanised / stainless steel wire rope of required dia with terminations and tensioning, double-pulley trolleys (2 nos), full body harnesses and helmets (4 sets each), braking system (spring / magnetic) and landing arrangement, safety back-up line, as per EN 15567 / approved specifications, including load testing and certification. (Tower structure, foundations and decking paid separately.)
27Supply, installation, testing and commissioning of HIGH LEVEL CHALLENGE COURSE elements (minimum 6 elements - Burma bridge, cargo net, tyre walk, balance log, rope traverse, spider web etc.) between posts at approx. 4.8 m height, including steel wire ropes, nets, timber elements, continuous belay system, harnesses and helmets, complete as per approved specifications. (Posts, frame and foundations paid separately.)
28Providing and filling washed, screened, rounded river / sea sand free from silt, shells and sharp particles in kids play area safety pit to 300 mm compacted thickness under and around play equipment, including levelling and raking, complete as directed by Engineer-in-Charge.
29Providing and laying Rajula stone paving of approved quality, hard, dense, and durable, of 100 mm thickness, roughly dressed or machine cut, in random pattern, laid over a prepared bed of sea sand.The work shall include:-Preparing subgrade to required levels, camber, and proper compaction-Providing and leveling a bed of well-compacted sea sand of required thickness-Supplying Rajula stones free from cracks, flaws, and weathered edges-Laying stones in random pattern, maintaining proper line, level, and slope-Hand packing and adjusting stones to achieve tight joints-Filling joints with sand or cement mortar (as directed)-Ramming, watering, and compacting to ensure proper seating-Cutting and dressing stones at edges, curves, and junctions-Finishing the surface true to line and level, including cleaning and curing if mortar is usedRate shall include:-Cost of all materials (Rajula stone, sand, mortar if applicable), labor, tools & plants, carriage, loading/unloading, cutting, wastage, compaction, curing, and all incidental charges to complete the work as per drawings and Engineer-in-charge instructions.
30Providing and fixing machine-cut / hand-dressed sandstone kerb stones of approved quality, having 150 mm thickness and 300 mm height, true to line, level, and gradient, including cutting and dressing as required.The work shall include:-Setting out alignment as per drawings and Engineer-in-charge instructions-Excavation of trench for kerb foundation to required depth and level-Providing and laying PCC bed (1:4:8 or 1:3:6) or cement mortar base as specified-Supplying, transporting, and placing sandstone kerb stones in position-Carefully aligning kerb stones in straight or curved alignment as required-Jointing kerb stones with cement mortar (1:3) and finishing joints neatly-Backfilling with available earth and compaction on both sides-Finishing exposed faces smooth and uniform as per approved finish-Curing the work properly and cleaning the site after completionThe kerb shall be fixed rigidly to withstand vehicular impact and prevent displacement.
31Providing and placing natural weathered stone boulders (granite / basalt) in clusters of 5-8 boulders of size 300-900 mm, partly embedded in ground on 75 mm PCC bed, including transportation, handling by crane / chain block, arranging as per landscape drawing and directions of Engineer-in-Charge (per cluster).
32Providing material and labor for GARDEN SOIL:- Supplying on site garden soil well sieved 90% to pass through I.S. sieve of 10mm size free from stones rubbish like dried grass roots and other such materials. The soil should be ftesh from quarry. The colour of the soil generally be red. The soil will be measured by measuring box.(Farma) (Item includes Royalty charges,, Transporting, Ioading unloading etc.) lead charges for 30 k.m. is considered. (For lawn area only - shrubbery & tree items include their own soil)
33Providing material and labor FARM YARD MANURE : Supplying on site well decayed, well dried, well powdered, without clods and free from stones, dried grass and other rubbish material. The colur of the manure generally be black. The manure will be measured by measuring box. (Farma) (Item includes Transporting, loading unloading etc.) lead charges for 20 km is considered.
34Providing labour for MIXING GARDEN SOIL/SILT & MANURE THROUGHLY WELL, Watering Pervious night, Planting required plant species, lawn gress as dricted etc. complete.
35Providing material and labor for LAWN :- Supplying and planting reuired variety of lawn grass as directed and maintaining till well established by watering, weeding clipping, rolling etc. complete.
36Providing material and labor for TREES:- (minium height to 3 RMT):- digging pit with size 0.9mx0.9mx0.9m removing and conveying unwanted stuff to a required stuff to a required distance as directed. Filling the pit with approved excavated material up to a height of 0.30m. And remining height of 0.60m with fresh garden soil and manure in 3:1 proportion . mixing soil and manure thoroughly well, levelling, as directed , watering previous night, planting two to three year old , minimum 2.0 RMT height , healthy trees sapling as per specification. maintaining till well established by watering , weeding, stirring of soil staking replacing of casualties etc. complete.
37Providing material and labor for TREES:-( height to 1.5 RMT):- digging pit with size 0.9mx0.9mx0.9m removing and conveying unwanted stuff to a required stuff to a required distance as directed. Filling the pit with approved excavated material up to a height of 0.30m. And remining height of 0.60m with fresh garden soil and manure in 3:1 proportion . mixing soil and manure thoroughly well, levelling, as directed , watering previous night, planting two to three year old , minimum 2.0 RMT height , healthy trees sapling as per specification. maintaining till well established by watering , weeding, stirring of soil staking replacing of casualties etc. complete.
38Preparing Shrubbery :- Excavting the ground to required depth of 30 cms, removing and coveying unwanted stuff to a required depth as directed. Filling fresh garden soil and manure in excavted area 3:1 poroporation to a height of 30 cms. Mixing garden soil and manure thoroughly well developed shurbs plants, 0.50 RMT height, 0.45RMTapart as directed and maintaining till well eastabilished by watering, weeding, stirring, replacing casualtiies etc. complete
39Providing material and labor for SHRUBS: Digging planting pits of size approx. 0.45m x 0.45m x 0.45m; removal and disposal of unwanted material as directed. Filling pit bottom 0.15m with approved excavated material. Backfilling remaining pit with fresh garden soil mixed with well-rotted manure/compost in 3:1 ratio, mixed thoroughly. Leveling and watering pit prior to planting. Supply and planting of healthy shrub saplings (1-2 years old), min. height 0.3-0.6m as per approved species and specs. Staking/support if required. Maintenance including watering, weeding, stirring soil, replacing dead plants until well established. Complete as per specifications and drawings.
40Providing and applying PROTECTIVE DUPLEX PAINT SYSTEM by AIRLESS SPRAY over hot-dip galvanized (GI) steel structural members (SHS sections, base plates, gussets & connections), suitable for severe coastal / marine exposure (Category C5 as per IS/ISO 12944), comprising:(a) SURFACE PREPARATION - removal of zinc salts / white rust, degreasing with approved solvent / alkaline cleaner, washing with fresh water, drying, and light abrasion / sweep blasting of the galvanized surface to obtain key for adhesion without damaging the zinc layer; masking of bolt threads;(b) PRIMER - one coat of two-pack epoxy zinc-phosphate primer suitable for galvanized surfaces, minimum DFT 60 micron;(c) FINISH - two coats of two-pack aliphatic acrylic polyurethane (PU) paint, UV-resistant, lead-free and non-toxic (suitable for children's play structures), colour / shade as approved by Architect, minimum DFT 40 micron per coat;TOTAL SYSTEM DFT NOT LESS THAN 140 MICRON.Rate to include all materials, thinners, airless spray equipment, scaffolding / access at all heights up to 13 m, shop application with site touch-up of transit and erection damage, DFT testing by elcometer at frequency directed, cleaning of site, all complete as per manufacturer's specification and direction of Engineer-in-Charge.Make: Asian Paints (PC range) / Berger Protective Coatings / Jotun / Akzo Nobel (International) or approved equivalent. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58589988
AUTHORITY Government Departments
TENDER VALUE 1.59 Crore
LAST DATE 02-12-2026
Authority
Authority Name Public Works Department
Work Description Tender for Development Of Childrens Play Area Including Installation Of Outdoor Gym Equipment And Other Allied Recreational Facilities At Nagoa Beach, Diu
Basic Detail
Tender No e-tender Notice No. 52/2026-27
Bidding Type Tender
Location
City Diu
State Daman and Diu
Key Dates
Publish Date 18 Nov 2026
Submission Date 02 Dec 2026
Open Date 02 Dec 2026
Finance
Tender Value 1.59 Crore
Tender Fee 1500
EMD 3.19 Lakhs
Exemption Not Available
Document List
5d927b2e-0a4a-4db1-a371-34016804cc46.html
BOQ_5235.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 18, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 02, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 13 days
Dec 02, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 13 days

Tender Documents

Download All (ZIP) ↓
html

5d927b2e-0a4a-4db1-a371-34016804cc46.html

xls

BOQ_5235.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender